CS Paper Radar

Co-designing a Layered Control Architecture

Chris Verhoek, Charis Stamouli, George J. Pappas, Nikolai Matni

eess.SY math.OC ·submitted 2026-10-14 20:30 UTC · v1

Abstract

Layered control architectures (LCAs) are ubiquitous in complex engineering systems. However, in practice they are largely designed ad hoc and mostly dictated by the experience of the designer. This is because there is currently no systematic and practically applicable theory available to holistically design LCAs. Hence, systematically reasoning about the optimality, stability, and feasibility of the LCA design is not possible. We set a first step toward such a theory by presenting a framework for co-designing a two-layer LCA for a linear time-invariant plant. The resulting co-design problem optimizes over architectural design variables (e.g., reduced order model dimension and sampling ratio between the layers) and tuning-based design variables (e.g., the numerical values of the feedback gain or the matrices of the reduced order model), all subject to constraints that ensure stability, feasibility, and compute properties of the closed-loop LCA. The proposed formulation allows to make informed tradeoffs along the Pareto front traced over different axes of optimality, e.g., speed, accuracy or computational effort. We demonstrate the effect of making various tradeoffs in a simple numerical example.

Comment
19 pages, extended version

Closest papers

Nearest neighbours by meaning across the whole index.

Communication Architecture Co-Design for Distributed Control via System Level Synthesis

eess.SY ·2026-09-14 ·Jeonghyeon Noh, SooJean Han
published similarity 0.57
Abstract · to appear at 2026 IEEE Conference on Decision and Control (CDC)

As networked dynamical systems grow in scale, distributed controller architecture design has become a critical issue. To address this, prior studies have incorporated the regularization for design (RFD) framework into system-level synthesis (SLS), focusing primarily on actuator and sensor placement. However, communication architectures also fundamentally impact the performance of distributed control, and scalable explicit co-design of the underlying communication topology within SLS remains challenging. This paper proposes a scalable convex framework for the co-design of communication architectures and distributed controllers within the SLS paradigm. We explicitly characterize a communication topology-induced feasible subspace of system responses, parameterized by the communication adjacency matrix and separate from the physical plant topology. By deriving a communication link norm from this characterized subspace, we formulate a convex SLS problem for communication architecture co-design. A proximal ADMM scheme is employed to appropriately decompose the optimization problem in a manner that preserves scalability to large networks. Numerical experiments validate the efficacy of the proposed framework in optimizing the trade-off between closed-loop performance and communication architecture complexity, while also confirming its scalability.

0.30

Data-Driven Communication Topology and Distributed Controller Synthesis: Control-Aware and Co-Design

eess.SY ·2026-09-29 ·Michael C. A. Nestor, Jiaxin Wang, Fei Teng
similarity 0.53
Abstract · Preprint submitted to Automatica

In distributed control schemes, the communication topology that defines information sharing between agents must be designed prior to online control execution. Previous data-driven works typically decouple the topology and controller design problems. This paper investigates data-driven approaches to topology design that guarantee the existence of a stabilizing controller, whilst trading off the level of required communication against control performance. We formulate a data-driven co-design scheme that directly co-optimizes the topology and controller over the link costs and closed-loop control cost. When the topology designer does not have access to the agents' control objectives, we propose a control-aware approach that couples the two design problems within a sequential scheme. In both cases, the topology is optimized within a mixed-integer semidefinite program (MISDP). Simulations including the IEEE 14-bus power system test case demonstrate the effectiveness of both co-design and control-aware schemes. Numerical examples show lower computation time for the control-aware case than for co-design.

0.21

Robust Control Design for LTI Systems with Sampling-Time Jitter

eess.SY ·2026-11-12 ·Dieter Schwarzmann, Jan Lunze
similarity 0.53
Abstract · Submitted to ECC2027

Sampling-time jitter makes a sampled-data control loop time-varying, so standard LTI robust-control synthesis does not apply directly. This paper reformulates dynamic output feedback design under bounded, unmeasured sample-to-sample jitter as a robust-control problem. The exact zero-order-hold model is decomposed into a nominal time-invariant plant and a memoryless, time-varying uncertainty block with a norm bound representing the sampling-time jitter. As the block is memoryless, the operator small-gain condition for the time varying loop reduces to a standard robustness test with a matrix norm bound. It is shown that the same test also guarantees uniform exponential stability for every admissible jitter sequence. Embedding the decomposition into a generalized plant with performance channels serves two synthesis objectives with standard robust-control tools: Robust stability with optimized nominal performance through structured H-inf synthesis, and robust performance through mu synthesis with constant scalings. A numerical example shows that jitter can destabilize a control loop with a nominal H-inf controller, whereas both robust designs remain stable and the robust-performance design is less sensitive to jitter at the cost of nominal performance.

0.36

Compositional Sensitivity Analysis for Multiobjective System Co-Design

eess.SY math.OC ·2026-10-13 ·Alan Bonomi, Antonio Terpin, Yubo Cai, Yujun Huang, Meshal Alharbi +1 more
similarity 0.53
Abstract

Sensitivity analysis of coupled systems typically propagates derivatives of single-valued maps, whereas multiobjective optimization generally treats sensitivity at the system level rather than through interconnected subsystems. We develop a mathematical framework for compositional sensitivity analysis in multiobjective system design, building on monotone co-design. Subsystems are represented as design problems (DPs), interconnected through series, parallel, union, intersection, and feedback composition. We introduce tangential DPs (TDPs) to describe first-order variations around an operating point, show that they preserve the structure of DPs, and characterize their queries through graphical derivatives. To account for multiple internal realizations of a system-level operating point, tangential co-design problems compose families of local TDPs by taking a union over these realizations while retaining the original interconnection structure. We show that these compositions yield families of TDPs and establish conditions under which sensitivity analysis commutes with individual composition operations. Beyond infinitesimal sensitivity, we show that bounded tangential models of convex DPs provide tighter outer approximations of feasible finite changes, which can be propagated through co-design problems without union compositions. We conclude with several convex and nonconvex numerical examples that showcase the framework's accuracy and computational benefits.

0.41

Robust Data-Driven Controller Synthesis from Sampled and Uncertain Frequency Response Estimates using Integral Quadratic Constraints

eess.SY ·2026-10-14 ·Luuk Marceau Spin, Maurice W. P. M. H. Heemels, Nathan van de Wouw, Roland Toth
similarity 0.53
Abstract · 15 pages, 6 figures, none other publications

In this paper, we develop a novel MIMO controller synthesis method that relies solely on frequency-domain data of discrete-time systems. The approach is based on an iterative design procedure using \emph{integral quadratic constraints} (IQCs). It generalizes existing data-driven methods that approximate semi-infinite IQC conditions by enforcing them on a finite set of measured frequency points. Such approximations do not provide guarantees on the continuous frequency axis and may fail to capture inter-frequency behavior. We address this limitation by formulating a convex optimization problem that preserves robustness guarantees over the entire frequency range. In particular, the proposed method explicitly accounts for inter-frequency behavior of both plant and controller, leading to certified robust stability and performance. The effectiveness and computational efficiency of the approach are demonstrated using experimentally obtained frequency response data from industrial-grade semiconductor equipment. The synthesized controller is implemented on the physical setup, and its performance is validated in real-time experiments.

0.35

Iteratively Convex Frequency Data-Driven Synthesis of Structured MIMO Controllers

eess.SY ·2026-10-14 ·Luuk Marceau Spin, Thom Samuels, Dragan Kostic, Maurice W. P. M. H. Heemels, Nathan van de Wouw +1 more
unusual similarity 0.52
Abstract · 16 pages, 11 figures, TCST paper

Frequency-response-function-based controller design enables synthesis directly from measured data, avoiding the need for accurate parametric plant models. This paper presents a generalized IQC-based approach for convex synthesis of structured MIMO feedback and feedforward controllers from frequency response function data. The framework supports flexible controller parametrizations, multiple performance objectives, and both singular-value and element-wise performance shaping of MIMO controllers within a unified frequency-domain formulation. To facilitate practical deployment, the synthesis approach is embedded within a bootstrapped controller design methodology that progressively increases controller flexibility while refining the performance specifications. The resulting approach is validated experimentally on the motion stage of an industrial wirebonder, where clear performance improvement is demonstrated through MIMO $\mathcal{H}_\infty$ synthesis, element-wise feedback shaping, and dynamic feedforward design. The results demonstrate that high-performance multivariable controllers can be synthesized directly from measured FRF data in a practical and systematic manner.

0.55

Feasibility of Simultaneous Input-Output Constraints for Tracking in a Class of LTI Systems: Part I

eess.SY ·2026-10-01 ·Junhyeok Yoon, Heather Hussain, Anuradha M. Annaswamy
similarity 0.52
Abstract · 14 pages, submitted to ACC 2027; v2: revised abstract, added the arXiv number of the companion paper (Part II, arXiv:2610.04742)

This paper addresses simultaneous input and output constraint satisfaction for a class of multi-input linear time-invariant systems with state feedback and integral action. A control barrier function (CBF)-based governor modifies the reference command while preserving the nominal feedback controller. Necessary and sufficient conditions are derived under which the governor is feasible at every state of a prescribed operating set and ensures simultaneous input and output constraint satisfaction, forward invariance, and bounded closed-loop solutions. The paper also shows that these conditions need not be met for certain choices of the CBF governor parameters due to conflicts between input and output constraints. A systematic design procedure is proposed that first searches for feasible free parameters and, if necessary, proposes a relaxation in the input constraint that restores feasibility. A companion paper provides numerical examples and counterexamples illustrating these results.

0.38

Safety of layered control systems via control barrier morphisms

eess.SY math.CTmath.OC ·2026-10-28 ·Aaron D. Ames, Joe Moeller, Massimiliano de Sa, Paulo Tabuada
theory similarity 0.51
Abstract

Layered control architectures provide a powerful paradigm for synthesizing controllers for complex systems. Yet, translating guarantees at each layer to system-level guarantees is challenging due to the interactions between layers. To address this problem, this paper presents a categorical perspective on layered control architectures. Individual systems are represented as control coalgebras, their interactions are specified as morphisms to mediators, and system-level behaviors are obtained via composition defined categorically as a pullback. To analyze the safety of these systems, we formulate control barrier morphisms (CBMs), the categorical generalization of control barrier functions. We prove that feedback controllers satisfying a CBM condition render the associated safe subobject forward invariant. It is through CBMs that we can establish the safety of layered systems: given a CBM at each layer subject to compatibility conditions, the universal property of the pullback implies the existence of a CBM for the composed system. Safety of a full-order model being safety filtered by a reduced-order model is recovered as a specialization of the categorical framework.

0.29