CS Paper Radar

Sensing-Aided Vehicular Beam Tracking: System Gain Over Link Feedback and Probe-Verified Sensing Invocation

Jeongwan Kang, Miguel Bordallo López, Nhan Thanh Nguyen, Junhyeong Kim, Sunwoo Kim

eess.SP ·submitted 2026-10-14 13:45 UTC · v3

Abstract

Sensor-based beam prediction is usually evaluated against exhaustive beam training, leaving open when sensing adds useful information beyond a deployed tracker's link feedback and when it should be withheld. We separate system gain from the marginal value of sensing in action-restricted causal replay of recorded 64-beam sweeps from four vehicular DeepSense 6G scenarios. The replay exposes only serving-beam and explicitly probed candidate powers and counts probes and model invocations separately. The proposed controller combines a scheduled post-setup re-sweep with probe-verified sensing admission and blacklist backoff. In three scenarios where feedback-only tracking is within 0.25 dB of the recorded-sweep oracle, the controller stays close to feedback-only in mean loss while rarely invoking the model, whereas always-on sensing performs worse. In the sole high-innovation scenario, the controller's system gain is 0.82 dB (95% confidence interval [0.30, 1.40]) over the plain feedback-only tracker and 0.15 dB over a probe-limited re-sweeping reference, with fewer probes than either. Sensing and the re-sweep both correct setup lock loss. At the native decision interval, enabling sensing in the same controller yields no statistically resolved loss reduction but cuts probing by 21%. In this scenario, accurate sensing reduces loss relative to the sensor-disabled controller under emulated link noise, staleness or longer decision intervals. Weak or delayed sensing can instead increase loss despite probe verification. These exploratory results characterize sensing as a conditional substitute for RF probing or a source of loss reduction, depending on the limitations of link feedback and on the accuracy and timeliness of sensing.

Comment
14 pages, 6 figures, 4 tables; supplementary material (17 pages) as an ancillary file. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

Excitation-Supervised Closed-Loop Self-Calibration and Target Seeking for an Unknown-Pose Range-Bearing Relay

eess.SY cs.RO ·2026-08-12 ·Yash Bagla
code/data similarity 0.59
Abstract · 12 pages, 6 figures, 5 tables. Code and data: https://github.com/yashbagla321/excitation-supervised-closed-loop (archived at https://doi.org…

A vehicle seeking a hidden target through a range-bearing relay of unknown position and yaw must decide, online, whether its own motion has already made the relay calibration trustworthy, and what to do when it has not. Two distinct vehicle-relative observations are known to remove the calibration gauge and make the target's relay-local packet globally actionable (arXiv:2608.09464), but that statement is static: it classifies a stored window only after the fact. This paper supplies the closed-loop layer: we show that the trajectory-spread margin $S_v$ that governs identifiability is simultaneously a finite-noise seed-accuracy bound, a local-vector variance decomposition, and a circle-geometry excitation budget, and we use it to supervise an excitation-reset controller. An excitation-supervised algorithm retriggers exploratory motion whenever the spread certificate is insufficient, projecting the target-seeking input away from the excitation's push, and otherwise proceeds to unrestricted target seeking. Under explicit sampling assumptions the supervision rule provably acquires any required excitation in finite time; in the noiseless local regime with positive excitation decay, estimator convergence yields target-seeking convergence after certification; and the threshold is selected from a desired calibration-accuracy level rather than chosen heuristically. Closed-loop simulation, paired Monte Carlo comparisons, a spread-threshold ablation, and a ROS 2/Gazebo software-in-the-loop experiment with sensing delay validate the approach. A decay-rate sweep shows that supervision matters when a fixed schedule's decay outruns the unknown time-to-adequate-excitation: over 100 paired trials the fixed baseline's yaw RMSE rises from 0.010 to 0.065 rad and success falls to 56%, while target-tracking error remains insensitive; supervision keeps yaw RMSE between 0.0095 and 0.0191 rad with 100% success.

0.64

CORA: Teacher-Guided Causal O-RAN Adaptation for Jamming Detection

cs.AI cs.LG ·2026-11-03 ·Sneihil Gopal, Richard A. Rouil
similarity 0.57
Abstract

In mission-critical networks, a missed jamming event is costlier than a false alarm, so detectors should favor recall, operate causally, and work without labeled attack data. Retrospective Key Performance Indicator (KPI) detectors meet the label-free requirement but rely on future context and cannot run in streaming operation. We present CORA, a teacher-guided reinforcement learning (RL) framework that transfers the hindsight of a retrospective detector to a causal one without labels during training or deployment. Offline, a retrospective KPI detector evaluated on unlabeled historical logs defines a recall-weighted reward for a masked controller that adapts the sensitivity, persistence, and grace of a causal KPI detector. At deployment, the teacher is removed and the frozen controller acts causally, with no ground-truth labels and no target-specific calibration. The design maps onto offline training in the Non-Real-Time RIC and causal control in the Near-Real-Time RIC of an Open Radio Access Network (O-RAN). Under leave-one-out transfer across ten 5G O-RAN testbed configurations, CORA reaches recall-oriented operating points on the deployable frontier that none of the evaluated baselines covers. A Proximal Policy Optimization (PPO) controller raises mean recall from 0.687 to 0.771 over a fixed default detector on all ten configurations, while a Deep Q-Network (DQN) achieves a comparable F2-score to the best teacher-selected static configuration, with 61% fewer false alarms. Removing the teacher lowers recall on every configuration.

0.28

Radar-Only Long-Term Beam Prediction in mmWave Vehicular Networks: An Empirical Study of Doppler Input and Cross-Modal Distillation

eess.SP ·2026-10-14 ·Jeongwan Kang, Miguel Bordallo López, Nhan Thanh Nguyen, Junhyeong Kim, Sunwoo Kim
similarity 0.57
Abstract · 13 pages, 6 figures, 3 tables; supplementary material (11 pages) as an ancillary file. This work has been submitted to the IEEE for possible…

Sensing-aided beam prediction could cut the beam-training overhead of millimeter-wave vehicular links, and two design choices could strengthen a radar-only predictor: a Doppler-resolved input and knowledge distilled from a camera during training. We measure what each is worth in received power rather than in top-1 accuracy, whose differences of a few points amount to only tenths of a decibel. We use real DeepSense 6G measurements, mainly at one roadside site, and one convolutional-recurrent predictor family evaluated open-loop up to 0.67 s ahead. Adding a range-Doppler map to the range-angle map lowers the mean beam-selection loss by 0.28 dB (95% bootstrap interval [0.14, 0.41]). The gain comes from the Doppler content, not from the extra input, and replicates, as pre-specified, at a second base station, although holding the last measured beam beats both predictors there. Cross-modal knowledge distillation from a motion-mask vision-radar teacher, by contrast, changes received power by -0.01 dB ([-0.07, +0.06]). The tested teacher, student, fusion and distillation variants show the same null in the metric each was scored on. Where distillation helps, in an exploratory run with few training passes, a radar-only teacher trained on all training passes reproduces most of the gain. For this predictor family and the full training set, the measurable gain at the link comes from Doppler-resolved radar content; no tested route for transferring training-only visual information adds a resolved gain.

0.55

WM4ISAC: World Model for Proactive ISAC Under Dynamic Blockage

eess.SP ·2026-10-06 ·Zichao Xiao, Linlong Wu, Bhavani Shankar Mysore R
publishedtheory similarity 0.54
Abstract · Accepted to IEEE ISAC 2026

Dynamic blockage severely degrades vehicular integrated sensing and communication (ISAC), since narrow millimeter-wave beams must be adjusted before the line-of-sight (LoS) link is blocked or misaligned. This paper proposes WM4ISAC, a proactive ISAC framework built on a world model that learns a reusable latent dynamics model of the traffic environment from downlink radar heatmaps, rather than directly mapping observations to beam indices. The proposed framework uses a vision (V) module to compress sensing observations, an action-conditioned memory (M) module to predict latent environment evolution, and lightweight event heads to evaluate LoS alignment, blockage, and scatter-assisted non-line-of-sight (NLoS) alignment for candidate beams. A codebook-level controller then uses these event predictions to proactively switch between LoS and NLoS beams without knowing the future user or blocker states. Simulations under dynamic blockage show that WM4ISAC improves the mean rate by $28.9\%$ over current LoS tracking, raises the 5\%-tile rate from $0.9$ Mbps to $30.5$ Mbps, and reaches $88.7\%$ of the perfect-information upper bound.

0.32

Current-Future Rate Tradeoffs in ISAC Under Random Path Changes

eess.SP ·2026-11-03 ·Hang Ruan, Zhaofeng Liu, Taneli Riihonen
similarity 0.54
Abstract · 6 pages, 5 figures

In mobile wireless links, motion changes path directions and visibility, and blockage can shift communication to a different propagation path. Integrated sensing and communication (ISAC) allows a base station (BS) to use echoes of data transmissions to monitor these changes and guide subsequent beam selection. Illuminating objects that govern future path availability may reduce the beamforming gain on the current communication route. Existing sensing-communication tradeoffs and dynamic beam-control frameworks do not directly quantify the future communication gain from this current-rate sacrifice. We quantify sensing value by the future-rate gain enabled by echo-adaptive beam selection. We derive explicit expressions for the future communication gain and the net gain after accounting for the current-rate loss. The analysis uses a coupled communication-echo channel with binary-state Markov motion over a finite burst informed by one processed echo. We show that monitoring is worthwhile when its future-rate gain exceeds the current loss, while more informative observations yield zero additional future rate if they cannot change any future optimal beam. We derive interpretable gain bounds exposing the roles of improved scene discrimination, motion memory and future beam-rate differences. Reciprocal-channel tests demonstrate positive net accumulated-rate gains from monitoring a moving blocker during reflected-path service, including continuous position uncertainty.

0.39

Anchor-Free Hidden-Target Seeking via Certified Self-Calibration under Correlated Odometry

cs.RO eess.SY ·2026-08-26 ·Yash Bagla
similarity 0.53
Abstract · 16 pages, 8 figures

We study hidden-target seeking in an anchor-free regime where neither the vehicle, the relay, nor the target has an accessible global pose. The vehicle never senses the target directly; it receives only range-bearing observations through a single relay of unknown position and orientation, with motion known only via integrated body-frame odometry. Absolute localization is fundamentally impossible: the joint configuration retains an exact three-dimensional SE(2) gauge no estimator can resolve. Yet the quantities needed for control remain fully recoverable: motion collapses calibration to a task-relevant quotient, the relay-to-odometry yaw and target displacement, identifiable in closed form from two distinct vehicle views. We introduce an O(K) multi-view self-calibration estimator with an exact first-order yaw-uncertainty certificate that propagates the cross-view correlations integrated odometry induces: the full certificate attains 95.0% pooled coverage at the nominal 95% level, versus 82.1% when correlated poses are treated as independent. The certificate drives a hybrid policy that excites until calibration is trustworthy, refuses uncertified estimates, seeks using continuously re-measured geometry, and detects relay-frame changes via persistent certified inconsistency, avoiding unbounded dead-reckoning drift. Across 200 randomized closed-loop trials, the method attains 0.064 m median station error versus 0.065 m for an oracle given the true relay yaw, despite 27 m median dead-reckoning drift over long horizons; 90 physics-based ROS 2/Gazebo trials retain 30/30 success under nominal operation, communication degradation, and relay-frame disturbances. These results show global localization is unnecessary for reliable hidden-target seeking under this single-relay model, even when both the sensing infrastructure and the vehicle's own reference frame are uncalibrated.

0.44

ReplayAudit: Auditing Outsourced LLM Fine-Tuning via Sealed Records and Selective Replay

cs.CR cs.LG ·2026-11-06 ·Yihan Xia, Wenxin Xu, Taotao Wang
similarity 0.53
Abstract · 23 pages, 5 figures

Auditing outsourced LLM fine-tuning requires checking an untrusted provider's training while controlling verification cost. Uniform sampling ignores training-time signals, while checking a suspicious record can require replaying several preceding steps. We present ReplayAudit, a telemetry-guided auditing system that seals training records before challenges and independently replays sampled intervals from sealed checkpoints. Loss changes and parameter-update norms guide stratified random sampling; replay determines whether the selected computation agrees with its records. We relate sampling probabilities to replay work and evaluate the system on real LoRA training. A 7B BF16 prototype rejects a false update-norm report during a random audit; targeted checks also reject false loss reports and skipped updates. We calibrate sampling budgets offline to at least a 90% probability of directly selecting an injected step. For two learning-rate deviation settings, executing these budgets on the same honest 1.5B trajectory reduces median complete-audit wall time by 49% and 67% relative to uniform sampling. When skipped updates evade the high-anomaly stratum, the corresponding audit instead costs 38% more. These results show how deviation capture and actual replay work jointly determine the cost of telemetry-guided auditing.

0.33

Confidence-Guided Adaptive Beam Selection for Vision-Aided Beam Tracking in mmWave Systems

eess.SP ·2026-10-15 ·Sohani Munteha Hiam, Mohammad Soleymani, Rafael F. Schaefer
published similarity 0.53
Abstract · Accepted at IEEE Communications Letter

Vision-aided beam tracking reduces mmWave beam-training overhead by predicting beam indices from camera observations. Fixed top-$K$ selection, however, assigns the same candidate beam budget to all predictions, ignoring uncertainty variations across samples and horizons. This letter proposes confidence-guided adaptive candidate selection: predictor logits are temperature-calibrated, and the smallest top-ranked beam set whose cumulative probability reaches a target threshold is retained under a maximum budget. On DeepSense~6G Scenario~8, over five random seeds and at matched overhead, the policy improves candidate set accuracy by up to 3.80 percentage points, increases normalized received power by 0.32 percentage points, and reduces outage probability by 2.06 percentage points without retraining the predictor.

0.37