CS Paper Radar

Dual-Purpose SSB Design for Joint Time-Frequency Synchronization Using Relocated DMRS

Sadiq Iqbal, Abdelali Arous, Huseyin Arslan

eess.SP ·submitted 2026-10-15 10:00 UTC · v1
benchmark

Abstract

The synchronization signal block (SSB) is designed to synchronize a capable user-equipment (UE) with the base-station (BS) in recent cellular networks. However, the same SSB cannot be utilized by a narrowband, low-complexity, and low-power internet of things (IoT) device for synchronization. To address this limitation, this paper proposes a dual-purpose SSB (DP-SSB) to enable low-complexity IoT synchronization using the existing SSB, while ensuring uninterrupted conventional UE operation. Specifically, selected demodulation reference signal (DMRS) symbols are contiguously mapped to some physical resource blocks (PRBs) in the second and fourth symbols of the DP-SSB. These DMRS symbols are further optimized using a receiver-aware least square (LS) approach to impose a distinct time-domain structure at the output of the IoT front-end. At the IoT receiver, a reduced-rate observation of the DP-SSB is obtained after narrowband filtering and decimation that is exploited for energy detection and sequential time-frequency (TF) synchronization. For the UE, primary synchronization signal (PSS) and secondary synchronization signal (SSS)-based synchronization is preserved, while the effect of relocated DMRS on the channel estimation and physical broadcast channel (PBCH) reception is assessed. The performance of the proposed DP-SSB is evaluated in terms of detection probability, TF synchronization accuracy, IoT receiver computational complexity, and UE-side PBCH decoding. Simulation results validate the analytical detection characterization and demonstrate reliable low-power IoT synchronization performance compared with the benchmark synchronization schemes while maintaining conventional UE operation.

Comment
13 pages, 9 figures, transaction

Closest papers

Nearest neighbours by meaning across the whole index.

Achievable Accuracy and Cramer Rao Bounds for SSB Based LEO Positioning in NR NTN

eess.SP ·2026-08-10 ·Rainer Bachl, Tingting Lei, Muhammad Nabeel
similarity 0.53
Abstract · Submitted to the 2026 IEEE Navigation Conference (NAVICON)

Advanced Low Earth Orbit (LEO) satellite networks, such as Starlinks Mobile Satellite Service (MSS), will adopt the 5G New Radio (NR) Non-Terrestrial Network (NTN) standard. This enables the use of ubiquitous Synchronization Signal Blocks (SSBs) for opportunistic receiver positioning based on pseudorange and Doppler measurements. In this work, we characterize the estimation theoretic limits of SSB-based positioning by deriving single SSB Cramer Rao lower bounds (CRLBs) for delay and carrier frequency observables associated with pseudorange and Doppler. These bounds are obtained using the full SSB time-frequency energy distribution and extended into a multi epoch, multi satellite Fisher information framework that jointly bounds stationary user position, clock bias, and clock drift. Each SSB contribution is weighted according to a range dependent CRLB determined by the received SNR, so the estimator and the bound share a common noise model. In simulation, the resulting bound closely matches achievable performance, and a physically weighted least squares estimator approaches the CRLB at realistic operating SNR. Using a Starlink based constellation, we analyze the operating SNR experienced by a ground user and demonstrate sub-meter positioning accuracy.

0.06

Blind and Asynchronous Initial Beam Acquisition and Clock-Assisted Re-Acquisition in Standalone Mobile MIMO-OFDM Systems

eess.SP ·2026-10-09 ·Ali Abdi, Firooz B. Saghezchi, Haris Gacanin
similarity 0.52
Abstract

Building upon our preliminary study, this paper proposes a standalone beam-management framework for mobile MIMO-OFDM systems that integrates Blind Initial Beam Acquisition (BIBA) with Clock-Assisted Re-Acquisition (CARA). BIBA is a blind and asynchronous protocol that requires neither prior synchronization nor an out-of-band feedback channel, so the Base Station (BS) and User Equipment (UE) can independently identify the beam pair maximizing received signal strength. To handle subsequent link drops, the newly introduced CARA protocol exploits the clock synchronization established after BIBA to reduce the re-acquisition time by approximately 55% compared with BIBA. The operational reliability of both protocols is bounded by a probabilistic feasibility analysis under random UE mobility trajectories. Protocols are validated on a 28 GHz mmWave testbed under practical hardware constraints, including beam-switching and Time Division Duplex (TDD) latencies, and measured Software-Defined Radio (SDR) software processing delays. Finally, we formulate a unified Finite State Machine (FSM) model for both BIBA and CARA to ensure robust integration into practical wireless systems

0.24

Estimating Timing Advance for Sub-THz Distributed Systems from Sub-10 GHz Channel State Information

eess.SP ·2026-08-23 ·Nishant Gupta, Muris Sarajlic, Erik G. Larsson
published similarity 0.52
Abstract · Accepted for presentation at IEEE VTC2026-Spring

Dual-band wireless architectures transmit the control information over the sub-10 GHz while reserving sub-THz for high data rate links, offering notable capacity gains. However, a critical bottleneck in such systems is timing synchronization. Due to the narrow beams of the sub-THz radio units (RUs), when the dual-band user equipment (UE) rotates or moves, it becomes necessary to switch the transmission between the sub-THz RUs. This switching requires recalibrating the timing of uplink (UL) and downlink (DL) transmissions to prevent communication disruptions. Moreover, for sub-THz RUs, the method introduces significant overhead and latency, especially when switches are frequent. Leveraging the reliable sub-10 GHz band offers greater resilience to UE mobility, making it suitable for control signalling. Thus, in this paper, we propose a deep learning-based algorithm that infers the propagation delay from the sub-THz RUs to the UE using sub-10 GHz channel characteristics. The inferred delay is used for calculating the timing advance for UL transmissions without the need for two-way synchronization. Simulation results show that the RU switch can be made seamless at the physical layer, without incurring any synchronization-related latency.

0.37

Synchronization and Channel Estimation of OTFS with RF Impairments

eess.SP ·2026-08-20 ·Sanoopkumar P. S., Mohsen Bayat, Stephen McWade, Arman Farhang
similarity 0.52
Abstract · Invited paper accepted for presentation at the 2026 IEEE 27th International Workshop on Signal Processing Advances in Wireless Communication…

Orthogonal Time Frequency Space (OTFS) modulation is a promising waveform for future wireless networks. However, its resilience to RF impairments remains relatively understudied. Low-cost RF front ends are crucial for next-generation wireless systems, yet their performance is often degraded by RF impairments such as transmit IQ imbalance (IQI), phase noise (PN), timing offset (TO), and carrier frequency offset (CFO). Hence, this paper addresses the estimation and compensation of these RF impairments in OTFS systems under high mobility. A unified system model is developed that incorporates TO, CFO, PN, IQI and other channel effects into an effective channel representation. Using the pilot with cyclic prefix (PCP), a low-peak to average power ratio (PAPR) pilot suitable for OTFS, we propose a pilot-aided synchronization and estimation framework. The dual periodicity of PCP is exploited in our proposed TO estimation technique. A maximum-likelihood-based technique is also proposed to jointly estimate the CFO and effective channel using a complex exponential basis expansion model (CE-BEM). Finally, a linear detection model is formulated in the delay-Doppler domain to mitigate residual interference caused by RF impairments. Our simulation results corroborate the efficacy of our proposed synchronization and channel estimation techniques.

0.24

Timing Misalignment and Its Impact on OTFS and Other Delay-Based Waveforms

eess.SP ·2026-10-13 ·Badr Eddine Ouakouak, Salah Eddine Zegrar, Hüseyin Arslan
top venuebenchmarkhot direction similarity 0.51
Abstract · Published in: IEEE Transactions on Communications. Date of Publication: 01 September 2026. Volume: 74. Page(s): 13657 - 13671. no ISSUE numb…

The shift towards 6G wireless networks calls for advanced waveforms to support emerging applications such as ultra-reliable and massive machine-type communications. Among the proposed candidates, OTFS, ODDM, OTSM, and OCDM share the common feature of exploiting the delay domain for data transmission. While these waveforms offer significant advantages in high-mobility and sensing scenarios, their integration into multi-user uplink systems reveals a critical challenge: timing misalignment (TM). Unlike OFDM, where residual timing offsets translate into phase rotations, delay-based waveforms experience actual shifts of resources, whose impact we investigate in this work. We show that the aforementioned waveforms can be unified under a time-invariant setup through a common input--output relation, which enables a unified analysis of TM in uplink resource allocation. The results reveal a fundamental trade-off between interference mitigation and guard overhead in the presence of TM. We further benchmark the observed behavior against OFDM under Doppler spread as a reference impairment and highlight the analogy between TM in delay-based allocation and Doppler spread in frequency-based allocation. The results show that delay-based waveforms can maintain a net performance advantage over OFDM in the considered setup. Beyond this unified Doppler-free analysis, we evaluate the joint impact of Doppler spread and TM on each waveform individually. We also investigate BER performance and show how coding can mitigate the resulting interference. This study therefore establishes a problem framework that motivates the development of future compensation and scheduling strategies for practical multi-user operation of delay-based waveforms.

0.44

Time Distribution Principle Using Measured Traveling Waves in Power Grid

eess.SY ·2026-08-13 ·Haozong Wang, Yayu Yang, Jiahui Yang, Muhamman Umar Afzaal, Yuru Wu +3 more
similarity 0.51
Abstract · 6 pages, 4 figures, 4 tables

Accurate time synchronization is essential for distributed systems. Conventional methods, such as satellite-based synchronization and communication-based approaches, face challenges including signal vulnerability and dependence on communication delay symmetry. This paper proposes a novel time synchronization principle based on traveling wave (TW) measurements in power grids. By leveraging the inherent symmetry of forward and backward TW propagation, the proposed method achieves high-precision time distribution without relying on external time references. The methodology is validated through electromagnetic transient simulations on a modified IEEE 14-bus system. The results demonstrate that under normal conditions, the proposed approach achieves microsecond-level synchronization accuracy. These findings suggest that the TW-based time synchronization principle is a potential alternative to traditional methods, offering improved security and reduced dependence on communication quality.

0.07

Widely Linear-Enhanced IQ Imbalance Interference Cancellation for AFDM-FTN Systems

eess.SP ·2026-10-17 ·Xianle Dai, Bowei Xue, Qu Luo, Jianguo Li, Neng Ye +2 more
similarity 0.51
Abstract

Internet of Things (IoT) networks require reliable and spectrally efficient wireless links to support massive device connectivity and high mobility applications. To meet these requirements, this paper investigates a widely linear (WL)-empowered receiver design for affine frequency division multiplexing (AFDM) with faster-than-Nyquist (FTN) signaling under practical receiver in phase and quadrature imbalance (IQI). The considered AFDM-FTN system couples the direct and image branches with FTN induced intersymbol interference (FTN-ISI) and delay-Doppler spreading in the affine domain. To address this coupled interference structure, a unified conjugate augmented input output model is established for IQI impaired AFDM-FTN systems. Based on this model, a WL minimum mean square error receiver with parallel interference cancellation (WL-MMSE-PIC) is developed, where WL-MMSE preprocessing is followed by the proposed hard decision PIC (HD-PIC) and damped soft decision PIC (SD-PIC). The proposed receiver is further analyzed in terms of the local stability of HD-PIC, a genie aided performance reference under ideal residual interference cancellation, and the impact of the AFDM chirp parameter on the post equalization interference distribution. Simulation results show that the proposed WL-MMSE-HD-PIC and WL-MMSE-SD-PIC receivers achieve significant error rate performance gains over the conventional linear-MMSE and WL-MMSE baselines. The results further show that FTN signaling provides a nominal spectral-efficiency gain, while residual-coupling-based chirp-parameter selection reduces the post-equalization residual coupling and improves detection reliability for high-mobility IoT links.

0.28

Multi-Timescale Context-Aware Radio Resource Optimization for Harmonious NTN-TN Coexistence: A Digital Twin and Open RAN Enabled Framework

cs.NI eess.SP ·2026-10-23 ·Ecem Izde Kaya, Md. Zoheb Hassan, Georges Kaddoum
benchmark similarity 0.48
Abstract · Submitted to IEEE for possible publication

Coexistence between non-terrestrial networks (NTNs) and terrestrial networks (TNs) is essential for future wireless systems, but terrestrial downlink transmissions can generate harmful aggregate interference at low-Earth orbit (LEO) satellite receivers. We present DT-STABLE, an Open Radio Access Network (O-RAN)-enabled, digital twin (DT)-assisted framework for context-aware NTN-TN coexistence. Using site-specific information, the DT estimates interference at LEO satellites, enabling proactive management with reduced real-time measurement overhead. We formulate joint beam activation and user association under RF-chain limits, load balancing, and aggregate satellite interference constraints; prove NP-hardness; and develop an efficient DT-guided scheduling algorithm. DT-STABLE couples short-timescale radio resource adaptation with periodic mid- and long-timescale DT updates through standardized O-RAN interfaces. Site-specific 28 GHz simulations under worst-case satellite geometry and low elevation angles show that DT-STABLE balances rate and interference utility, achieving 89.63% interference-to-noise ratio (INR) satisfaction and a mean sum rate of 210.96 bps/Hz, with nearly 100% INR satisfaction when satellite protection is prioritized. The framework reduces beam measurement overhead by 99.71% relative to exhaustive sweeping and achieves up to 33.1 times lower runtime than the Gurobi-based exact optimization benchmark.

0.29