CS Paper Radar

How the elastic axis folds the transonic flutter boundary: shock energy transfer and conformally calibrated active learning

Ashray Saxena, Sharad Shrivastava

cs.LG physics.flu-dyn ·submitted 2026-10-16 11:04 UTC · v2
publishedunusual

Abstract

Isogai's case A, a pitch-plunge aerofoil whose elastic axis lies half a chord ahead of the leading edge, has a folded transonic flutter boundary in inviscid flow, with several flutter speeds at one Mach number. We map this boundary and its elastic-axis family with coupled Euler simulations, a Gaussian-process surrogate of the damping trained by batch active learning, and distribution-free split conformal prediction, which bounds the marginal error rate of stability calls. Three failure modes of damping labels are invisible in the residuals, and the half-degree mean incidence left by an impulsive start at $1^\circ$ freestream incidence raises the flutter speed at the dip by 2.8%, more than any numerical setting. With 80 simulations the learned case A boundary labels 63 of 64 independent runs correctly, and at most 1.8% of calibrated calls on held-out runs are wrong. Over Mach number, elastic axis and flutter speed index, 193 simulations show that, for the case A structure about the axis, the inviscid fold exists only for axes more than about 0.4 chord ahead of the leading edge, on two meshes. Chordwise energy budgets, closed three ways, explain both branches. On the lower branch the falling reduced frequency, at unchanged shock phase, raises the shock input and lowers the upstream damping similarly. On the upper branch the shock is pinned at the trailing edge; moving the axis aft brings the flutter-mode pivot towards the section, so the upstream damping falls faster than the residual shock input and the fold closes.

Comment
28 pages, 15 figures, 8 tables. Accepted for publication in Transport Phenomena (Special Edition: Tribute to John Charles Slattery). Code and data: https://doi.org/10.5281/zenodo.23415511
DOI
10.1515/tp-2026-0137

Closest papers

Nearest neighbours by meaning across the whole index.

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.56
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

Modelling non-linear aeroelastic loads in long-span bridges with extreme learning machines

cs.CE cs.LG ·2026-09-27 ·Gledson Rodrigo Tondo, Samir Chawdhury, Sergio Andres Castro Giraldo, Guido Morgenthal
publishedcode/data similarity 0.54
Abstract

Accurate modelling of aerodynamic loads is essential for predicting instabilities and ensuring the safety of long-span bridges. A methodology is introduced for modelling aerodynamic self-excited forces in bridge-deck cross-sections using extreme learning machines (ELMs). ELMs, as single-layer feedforward neural networks, offer efficient training and accurate predictions. Forced-oscillation datasets from computational fluid dynamics (CFD) or wind-tunnel experiments are used for training, enabling systematic data selection to capture non-linear aerodynamic behaviour often missed by semi-analytical approaches. Once trained, the model predicts self-excited loads for any arbitrary motion composed by frequencies and amplitudes within the training domain. Comparisons with analytical, semi-analytical, and CFD results show superior accuracy in capturing non-linear force components and close agreement for aerodynamic loads and flutter wind speeds. Training required about 1.1\% of the time of a conventional neural network, and coupled flutter analysis runs in seconds, providing orders-of-magnitude speed-ups over CFD. These results indicate that ELM-based frameworks are accurate, practical, and efficient alternatives for modelling self-excited loads, particularly when preliminary CFD or wind-tunnel data are available. The presented approach offers a reliable data-driven technique for aeroelastic load modelling in long-span bridges.

0.30

High-Fidelity Aerostructural Dataset of Transonic Wings in Cruise Conditions

cs.LG cs.CEphysics.flu-dyn ·2026-10-27 ·Pavankumar Koratikere, Abhijnan Dikshit, Leifur Leifsson
benchmarkcode/data similarity 0.54
Abstract · The dataset is available at: \url{https://huggingface.co/datasets/computationaldesignlab/transonic-wing-aerostruct-dataset}

Recent advances in machine learning (ML) have the potential to substantially accelerate aircraft wing design, a process that has traditionally required extensive high-fidelity simulation and design iteration. Existing public datasets for ML-based wing design have focused primarily on aerodynamic performance, with limited consideration of the multidisciplinary interactions that govern practical aircraft design. In particular, efficient wing design requires simultaneous consideration of aerodynamic performance and structural integrity, yet no publicly available datasets capture this coupled aerostructural behavior at high-fidelity. To address this need, a high-fidelity multidisciplinary dataset for static aerostructural analysis of transonic wings is introduced. The dataset includes 2471 samples, along with three out-of-distribution samples. The wing planform geometry is parameterized by span, sweep, dihedral, tip chord, and tip twist, while the airfoil cross-sections are parameterized using the class-shape transformation method. The analysis is further parameterized by Mach number, angle of attack, altitude, and structural load factor. The utility of the dataset is demonstrated by training state-of-the-art ML models to predict aerodynamic surface quantities, integrated aerodynamic performance quantities, and the failure distribution of the wingbox. ML models achieve at most 0.0309 normalized root mean squared error (NRMSE) in the prediction of aerodynamic quantities and at most 0.1189 NRMSE in the prediction of failure distribution of the wingbox. By providing coupled aerodynamic and structural responses for a diverse set of transonic wings, this dataset establishes a benchmark for developing, evaluating, and comparing multi-physics ML models for wing design. Broadly, it is intended to encourage creation of similar high-fidelity multi-physics benchmark datasets across engineering domains.

0.38

Transducer Placement and the Limits of a Four-State Reduced Model in Post-Flutter Piezoelectric Energy Harvesting from a Pitch-Plunge-Flap Aerofoil

cs.CE eess.SYmath-ph ·2026-09-11 ·Nikolaos D. Tantaroudas, Ilias Karachalios, Andrew J. McCracken
unusualhighly cited similarity 0.53
Abstract · 16 pages; 6 figures;

Aeroelastic ?utter is normally a failure mode to be designed against, yet the limit-cycle oscillations (LCOs) that follow it convert flow energy into sustained structural motion that a piezoelectric transducer can turn into electrical power. A transducer is embedded in a three-degree-of-freedom pitch-plunge aerofoil with a finite-mass trailing-edge flap and unsteady strip-theory aerodynamics, giving a fifteen-state electro-aeroelastic system with a cubic hardening pitch spring, and the system is reduced by biorthonormal projection of the Taylor-expanded residual onto eigenvectors of the coupled Jacobian. The testbed is deliberately low order, so that every reduced prediction can be checked against the full-order system it replaces. The degree of freedom that carries the transducer is a first-order design variable, since it sets both the sign of the shift in the flutter boundary and the magnitude of the harvested power. The error of the reduced model is dominated not by the size of the retained basis but by how the reduced operator is made to depend on low speed. Expanding the retained eigenvalues leaves the reduced operator block-diagonal, with no coupling between the retained modes at any order of the expansion, whereas re-projecting the exact Jacobian onto the same frozen basis supplies that coupling and restores the structural response without enlarging the basis. It is found that the error that remains lies in the harvested voltage, which the equilibrium eigenvectors carry in a fixed proportion to the motion, and this is not removed by adding the electrical modes to the basis, whereas the flap detection, which the same basis also misses, is recovered by retaining the flap modes. The accuracy of a harvester reduced-order model must therefore be reported on the harvested quantity itself.

0.57

Piezoelectric Energy Harvesting from a Pitch-Plunge Aerofoil in Compressible Flow, the Euler Full-Order Model, Strip Theory and the Reduced Models Compared

cs.CE ·2026-09-16 ·Nikolaos D. Tantaroudas, Ilias Karachalios, Andrew J. McCracken
similarity 0.53
Abstract · 15 pages, 4 figures

A piezoelectric transducer embedded in a pitch-plunge aerofoil with a finite-mass trailingedge flap converts the limit-cycle oscillation that follows flutter into electrical power. The design findings for such a harvester have so far been obtained with incompressible strip theory, whose aerodynamic state is a handful of lag variables. Here the same section, the same transducer and the same test cases are coupled instead to the two-dimensional compressible Euler equations, giving a full-order model of twelve thousand states, and the two aerodynamic models are placed side by side on the flutter boundary, on the limit cycle and on the harvested power, with the strip-theory results compared against higher fidelity aerodynamic modelling provided by CFD. The degree of freedom carrying the transducer remains the first-order design variable, and the ranking of the mountings and the position of the optimum in the coupling and load-resistance plane are unchanged, while strip theory is found to underpredict the harvested power of the compressible section and to overstate the effect of the transducer on stability where the electrical time constant meets the flutter frequency. A nonlinear reduced model of four states, built on eigenvectors of the coupled Jacobian at the velocity of interest, reproduces the frequency of the cycle, its pitch amplitude, the transducer voltage and the mean power, and misstates the proportion of plunge to pitch in the orbit and its phase. That error is shown to be independent of the amplitude of the cycle and to survive enlargement of the basis, which places it in the retained subspace rather than in the order of the expansion, and suggests that such models should be judged on the shape of the orbit rather than on a single amplitude.

0.37

Compressible aerodynamics and rigid-body support motion in post-flutter piezoelectric energy harvesting from a pitch-plunge-flap aerofoil

cs.CE ·2026-09-21 ·Nikolaos D. Tantaroudas, Ilias Karachalios, Andrew J. McCracken
similarity 0.52
Abstract · 14, 3 figures

A piezoelectric transducer on a pitching and plunging aerofoil with a trailing edge flap turns the limit cycle that follows flutter into electrical power, and two modelling changes to that harvester have been studied separately. Replacing incompressible strip theory by the compressible Euler equations reduces the stabilising effect of a transducer mounted on the pitch, where the electrical time constant meets the flutter frequency, and raises the harvested power, and letting the section react against a fuselage free to translate, instead of rigid ground, does the same two things by about the same amounts. Here both changes are put in one model, which needs no new mesh motion in the flow solver, since the support's translation displaces the wall exactly as the plunge does. On the harvested power the two published corrections simply multiply. On the flutter boundary they more than compound, and at strong enough coupling they reverse the sign of the transducer's effect at the load resistance where both companion papers harvest, although neither change alone reverses it. The free support widens the band of resistance over which the two aerodynamic models disagree in sign, carrying its upper edge out by about a factor of three. Above the resistance where the electrical pole meets the flutter frequency, where the transducer acts as an added stiffness, the product of the published corrections predicts the shift to within seven parts in a thousand. Below it, where the transducer acts as a damper whose effect depends on phase, the product is wrong by a factor of up to fourteen, and on the pitch mounting by a sign. The same transducer lowers the boundary while flattening the growth of the instability above it. Whether corrections found one change at a time may be multiplied therefore depends on the quantity and, for the flutter boundary, on the regime of the transducer.

0.15

Structure-preserving reduced-order models of thin panels in supersonic and hypersonic flow

cs.CE cs.LGmath.NA ·2026-10-22 ·Miguel A. Aguilo
similarity 0.51
Abstract · 68 pages, 15 figures

We build structure-preserving reduced-order models for both challenge problems of the AePW-4 High-Speed Working Group. They are a clamped thin panel at Mach 1.92 (RC-19) and a cantilever plate at Mach 5.85 (HyMAX). The published data for each case hold no time-resolved response and no repeated runs. The physics must therefore be carried by the form of the model. One construction gives two models per problem. A Ritz-Galerkin reference model describes the plate. A learned model keeps the reference model's exact potential, fits the remaining generalized forces, and trains only a dissipation that cannot add energy. Its energy balance holds for any weights by construction. On the trained model the worst relative residual is 2.2e-15. On RC-19, shock relations predict a pressure ratio of 1.521 across the panel. Pressure-sensitive paint measured the same value. Thirty runs of the learned model place the mean dominant frequency within 1.0% of the measured 236 Hz. At one periodic and one chaotic condition, the learned model reproduces the response regime of a published reduced-order model in all sixteen runs. It does so without that model's 113 Hz spectral peak, which the measurements do not show. Measured displacements can also correct the chaotic response through one more force that respects the energy balance. We tested this on synthetic data at the experiment's 5 kHz sampling rate. The state error is 1.25% of the panel thickness without noise and 3.5% with 10 micrometers of noise. On HyMAX the learned model follows the reference model's trailing-edge displacement for 65 ms with a relative error of 3.7%. These results show that a model whose structure carries the physics can match measured flutter behavior when the available data cannot train it.

0.30

Why the Swing Parameters Are Sloppy

eess.SY ·2026-10-21 ·Sunny Kumar, Madhavi Parimi, Shashank Varma, Sushama Wagh, Alexsandar Stanković +1 more
theoryunusual similarity 0.50
Abstract

When a multi-parameter model is fitted to measured data, only a few parameter combinations are often identifiable, as Fisher Information Matrix eigenvalues span several orders of magnitude. Sensitivity-based tools, including the Fisher Information Matrix and MBAM, reveal this structure analytically, while manifold learning can recover it from sampled trajectories. For an infinite-bus synchronous generator, both approaches show that inertia H and damping D are among the least identifiable parameters on a late post-disturbance window, t in [3,5] s, where six of the eleven parameters suffice to describe the response. We explain this result from the geometry of the dynamics rather than from that of the parameter-to-data map. The rotor swing is a fast fibre that has collapsed onto a two-dimensional normally attracting invariant manifold (NAIM) of the transient fluxes before the window opens. The zeroth-order NAIM is exactly independent of $H$, $D$, $T_{d0}''$ and $T_{q0}''$, four of the five MBAM limits. We prove, under stated smoothness and rank conditions, that each of the four limits is a boundary of the model manifold at a distance equal, to first order in the parameter, to its current profiled speed. The same analysis predicts how identifiability changes with the experiment: neither a larger initial speed deviation nor a load change restores H or D in the late window, whereas the early window [0, 2]s makes H the best-determined parameter. Evaluated in a physical metric fixed by synchrophasor accuracy limits, the late window identifies five parameters rather than six and the early window nine. The spiked-covariance structure of the linearised trajectory map explains why the principal components of whitened, sampled trajectories reproduce the prior-scaled Fisher spectrum, and regression on those components attains the Fisher-predicted recovery error in 113 of 114 parameter scenario pairs.

0.24