CS Paper Radar

Multimodal Interaction Estimation for Contact-Aware Adaptive Impedance Control

Mateusz Jaszczuk, Paris Perdikaris, Nadia Figueroa

cs.RO ·submitted 2026-10-16 21:00 UTC · v1

Abstract

With advancements in learning-based policies, robots are increasingly being deployed in human-centric environments, such as manufacturing floors and homes, where safe and precise operation requires compensating for unknown loads while remaining compliant during human interactions. Reliably distinguishing between these interaction types is challenging with a single sensing modality, as force signals cannot separate payloads from human pushes, and vision is susceptible to occlusions. We propose a task-agnostic interaction estimation and adaptive control framework that addresses this challenge by fusing force history and 3D point cloud through a transformer-based classifier. Trained with modality dropout for occlusion resilience and fine-tuned from simulation to hardware, the classifier achieves 91.89% accuracy and maintains above 90% under complete occlusion of one modality. The classifier drives a system identification framework that selectively compensates for unknown payloads and a variable-impedance controller that switches between adaptive and reactive modes, while simultaneously estimating interaction forces for downstream tasks, such as human intent estimation. We validate the framework under external perturbations and unknown loads across single-arm manipulation, deployment with an imitation-learning-based policy, intent-driven target switching, and zero-shot bimanual deployment on two Franka arms lifting a box of unknown mass, demonstrating generalization to closed kinematic chains and unseen setups, enabling safe and precise deployment.

Closest papers

Nearest neighbours by meaning across the whole index.

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.72
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

Feeling Through the Load: Compliant Quadruped Locomotion under Payload Interactions

cs.RO ·2026-10-06 ·Shaunak A. Mehta, Mayank Mishra, Prajit KrisshnaKumar, Sebastian Scherer, Koichiro Niinuma
similarity 0.69
Abstract

Quadruped robots are increasingly expected to carry objects while moving through human environments. But what happens when a person interacts directly with the payload rather than with the robot? If the payload is unrestrained, the robot must distinguish intentional external interactions from ordinary payload motion, while still keeping the load balanced and maintaining stable locomotion. How can a quadruped infer and compliantly respond to such interactions using only onboard measurements? In this work, we develop a force-aware locomotion framework that treats payload interactions as commands that shape the motion of the combined robot-payload system. Our approach separates the learning of force-aware locomotion and force estimation on an unrestrained payload. We combine a compliant load-carrying policy with a causal force estimator, trained through estimator-in-the-loop data aggregation and finetuning, to predict interactions from onboard robot measurements. Our simulations and real-world experiments show that the resulting controller can maintain stable payload-carrying locomotion, yield compliantly to external interactions, and use the inferred force to support human-guided changes in the robot's trajectory.

0.21

FWBC-VLA: Force-Aware Whole-Body Compensation for Contact-Rich Loco-Manipulation

cs.RO cs.AI ·2026-09-03 ·Yutian Zhang, Siyuan Ma, Liwen Yang, Yang Li, Ce Hao +4 more
similarity 0.67
Abstract · 9 pages, 6 figures

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL\&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

0.46

CompVLA: A Variable Compliance Vision-Language-Action Model for Contact-rich Manipulation

cs.RO ·2026-09-20 ·Jongmin Kim, Junsu Ha, Che-Sang Park, Minchang Song, Hyeokju Jeong +3 more
hot direction similarity 0.67
Abstract · Conference on Robot Learning (CoRL) 2026

Contact-rich manipulation, requiring robots to regulate not only motion but also how they yield to external forces, has emerged as the next frontier for Vision-Language-Action (VLA) models. However, existing VLAs output purely kinematic commands, degrading performance on real-world contact-rich tasks. In this paper, we introduce CompVLA, a unified VLA framework that jointly predicts motion and a stiffness matrix from RGB and language inputs. Our approach augments the conventional architecture with a dedicated Compliance Expert, which outputs time-varying stiffness and virtual displacement profiles executed via geometric impedance control. We demonstrate that CompVLA achieves the highest average success rate across diverse contact-rich tasks, outperforming both vanilla and compliance-aware VLA baselines, with ablations confirming each component is essential.

0.48

PRISM: Precision and contact-rich Real-world Industrial Skill dataset with Multimodal sensing

cs.RO ·2026-08-18 ·Tengbo Yu, Jiahao Wu, Hanning Wang, Rui Chen, Chuanhou Liu +2 more
benchmarkdatasetcode/data similarity 0.67
Abstract

Recent progress in robotic learning has been fueled by large-scale datasets collected in everyday environments. However, most existing datasets emphasize short-horizon, low-contact tasks such as pick-and-place, and therefore do not capture the precision control, force/torque or tactile regulation, and multimodal feedback required for industrial assembly. To address this gap, we introduce PRISM, a large-scale multimodal dataset for contact-rich industrial operations. The dataset spans more than 25 manipulation tasks (e.g., electronic components plug/unplug, conveyor-based sorting) and covers diverse mechanical constraints. PRISM includes more than 5,000 trajectories totaling 45 hours of teleoperated demonstrations, recorded using synchronized multi-view RGB-D, force/torque, tactile, and robot-state measurements. In contrast to datasets collected in household or laboratory settings, PRISM provides a realistic benchmark for multimodal perception and control under high-precision industrial constraints, and serves as a foundation for contact-rich, generalizable manipulation in real-world manufacturing environments. The dataset is open-sourced at: https://tengbo-yu.github.io/PRISM/

0.33

CR-VLA-Force: Learning Control-aware Compliance VLA Model for Robust Contact-rich Robotic Manipulation

cs.RO ·2026-09-05 ·Zhaohong Mai, Chao Wang, Chao Zeng, Sitong Mao, Heng Zhang +2 more
top venue similarity 0.67
Abstract · 14 pages, 8 figures. Accepted by IEEE Robotics and Automation Letters (RA-L)

Integrating visuomotor policies or Vision-Language-Action (VLA) models with force/torque (F/T) perception has demonstrated significant progress in imitation learning for robotic manipulation. However, existing force-aware VLA models frequently exhibit limited capability in precise force tracking and rapid successive adjustments. This deficiency stems from the limitations of action-chunk execution strategies and the substantial latency between perception and real-time control. Such limitations can lead to task failures and safety risks, particularly when the execution of an action chunk exerts excessive interaction forces without timely adjustment. To overcome this challenge, we propose the Control-aware Compliance VLA (CC-VLA) framework for reactive control. The CC-VLA model employs a multimodal mixture-of-experts (MoE) to encode force signal sequences and vision-language fused feature. Furthermore, it utilizes a multi-stage training strategy to ensure robust perception within the visual-semantic space and effective force perception under sparse sampling conditions. Additionally, a VLA-guided adaptive compliance controller is designed to facilitate precise position tracking during contact-free motion and optimal force-position tracking for contact-rich tasks. To facilitate high-precision F/T data acquisition, we also implement an adversaria shared teleoperation strategy for contact-rich demonstrations that bolsters system safety and interactivity. Extensive real-world experiments demonstrate that CC-VLA significantly improves success rates in challenging force-perception tasks and enhances force-control precision, while providing multi-level safety and robustness under the tested partial-OOD pose-shift settings.

0.62

Wrench-ACT: Enhancing Robot Policies for Contact Rich Behavior Using Direct Wrench Control

cs.RO ·2026-09-29 ·Johannes Hechtl, Yannik Blei, Simon Ball, Reihaneh Mirjalili, Michael Krawez +3 more
similarity 0.67
Abstract

While contact-rich manipulation requires deliberate regulation of interaction forces, recent approaches to robot manipulation learning predominantly represent actions as target positions or poses. Even methods that incorporate force sensing either use it solely as an observation or, when predicting forces as part of the output, rely on a hybrid force controller. In this paper, we propose an imitation learning policy that predicts wrenches as its sole action output for direct use by a pure force controller. Our studies suggest that force-domain imitation learning depends critically on data collection, with force-feedback teleoperation improving policy performance by capturing the operator's deliberate force regulation. Using Action Chunking with Transformers (ACT) as the base architecture, we train single-task models on bilateral wrench demonstrations and evaluate them on five contact-rich manipulation tasks. The wrench policy matches or outperforms position-based baselines across all tasks, with gains varying according to the degree of deliberate force regulation each task requires. Cross-condition ablations show that the bilateral data collection interface and the wrench action space each contribute independently to performance. To support further research, we will release over 1000 wrench-action demonstrations spanning these tasks on a companion website upon publication.

0.16

Enabling Scalable Kinesthetic Teaching via Observer-based Hand-guiding with Active Support

cs.RO ·2026-08-11 ·Anna Tuma, Giuseppe Monetti, Jochen J. Steil, Niels Dehio
published similarity 0.66
Abstract

Kinesthetic teaching through robot hand-guiding provides a natural interface for collecting demonstrations in imitation learning and programming-by-demonstration. However, extended sessions cause operator fatigue, reducing demonstration quality and limiting scalability. Current industrial hand-guiding approaches typically provide no active assistance, and alternatives require costly wrist-mounted force-torque sensors or rely on learned motion priors unavailable for new tasks. We propose RHOAS, a hand-guiding scheme that actively supports operator-intended motions using model-based force estimation without additional hardware. Our approach considers robot hand-guiding as an actively controlled interaction by the human operator, rather than an interaction with a passive environment. Standard methods used for hand-guiding typically rely on general passivity-based compliant control architectures that unnecessarily increase operator effort and limit the range of demonstrable motions without providing the intended stability guarantees in active interaction. Instead, our design utilizes model-based external torque estimation, internal joint torque sensing, and redundant robot kinematics to actively support human physical input within the human interaction frequency bandwidth. We address practical challenges of relying on observer-based force estimation, including suppression of unmodeled joint elastic dynamic effects and measurement noise in the feedback path, reduced estimate accuracy close to kinematic singularities, and static gravity compensation errors. In a user study with 16 participants on a KUKA LWR iiwa we demonstrate statistically significant reductions in physical effort, improved maneuverability for both precise and agile tasks, and clear user preference.

0.23