CS Paper Radar

Surface matching for image-derived geometries with a projection-based separation of rigid body modes

Ludwig Wagmüller, Christian Bilas, Markus Gitterle, Michael Wibmer, Michael W. Gee

cs.CE ·submitted 2026-10-19 12:01 UTC · v1

Abstract

The large diffeomorphic deformation metric mapping (LDDMM) framework offers numerous techniques for analyzing shapes and images. Surface matching computes a non-rigid, smooth, and invertible mapping that registers one surface to another. The computed deformation may contain rigid body motion, which frequently does not represent meaningful shape differences but is due to external factors like imaging modalities, such as the object's positioning during image acquisition. We present a simple extension to the LDDMM framework's surface matching that uniquely decomposes the computed deformation into rigid body modes (RBM) and RBM-free motion by introducing a suitable projection. This enables a focused analysis of each component individually and additionally helps to preserve the surface discretization quality. Three sets of examples illustrate our approach. A small-scale example demonstrates the proposed method's effects, followed by an example using a single pair of heart geometries, and finally an example involving a cohort of 98 heart shapes.

Comment
28 pages, 11 figures, 6 tables, 1 appendix, submitted for publication in a scientific journal, currently under review

Closest papers

Nearest neighbours by meaning across the whole index.

Landmark-Free and Scale-Blind Multi-View Registration of Preoperative Liver Models to Intraoperative Surfaces

cs.CV cs.AIcs.HC ·2026-10-16 ·Jiaming Feng, Gerardo Loza Galindo, Shahid Farid, Sharib Ali
similarity 0.59
Abstract · 10 pages

Augmented-reality guidance in laparoscopic liver resection requires aligning preoperative 3D liver models from CT/MRI with intraoperative surfaces. Monocular reconstruction in most cases cannot guarantee scale, albeit rigid-motion registration requires scale as an input. Our proposed framework ``SimCompose'' estimates the full similarity transformation $\Sim$, including scale, without relying on landmarks and applies the same transformation across multiple views with known relative geometry. However, reliable detection of registration failures remains challenging in surgical settings, where ground-truth alignment is generally unavailable. For this, we propose a geometry-based selector that evaluates candidate transformations without requiring ground truth. Large disagreement among these transformations is used to flag potentially unreliable registrations. Finally, we propose to use a non-rigid refinement based on a low-dimensional deformation model from Neo-Hookean simulations in the Simulation Open Framework Architecture (SOFA), without additional network training. SimCompose is trained exclusively on synthetic partial views. Its encoder processes point clouds normalised to a unit root-mean-square radius, without access to metric scale, and filters each view before multi-view fusion. Evaluation on unseen synthetic data (300 single-view pairs per run; 100 three-view registrations) shows that multi-view integration and candidate selection increase the success rate under stringent $\Sim$ accuracy criteria from 38.4% for a single-view, single-method configuration to 77%. Existing learning-based baselines do not satisfy these criteria even when provided with the exact scale. On five in-vivo patients with 92 keyframes, the rigid registration stage reduces surface error more than three-fold relative to learning-based baselines with external scale information.

0.12

TRACE: Artifact-Robust Statistical Shape Modeling from Imperfect Surface Scans - A Case Study in Craniosynostosis 3D Photography

cs.CV cs.AI ·2026-08-22 ·Sanjay Bhandari, Nawazish Khan, Alzbeta Novotna, Tiffany Jeong, Loretta Bowman +5 more
published similarity 0.58
Abstract · Accepted at ShapeMI workshop at MICCAI 2026

Craniosynostosis severity analysis increasingly relies on statistical shape models (SSMs) to quantify cranial morphology, but most existing workflows depend on computed tomography or heavily curated three-dimensional (3D) photographs. Raw clinical 3D photographs provide a radiation-free and repeatable alternative, yet often contain shoulders, hands, hair, clothing, scanner noise, and incomplete boundaries that corrupt correspondences. We introduce the Template-constrained Robust Artifact-aware Correspondence Estimation (TRACE) framework, an unsupervised method for constructing SSMs directly from artifact-contaminated clinical 3D head photographs. TRACE predicts sparse anatomically corresponding head-surface control points from the raw point cloud, refines them through a coarse-to-fine Surface-Aware Deformation cascade, and uses thin-plate spline warping to deform a clean template mesh into a subject-specific head reconstruction. This template-constrained formulation keeps dense correspondences on clinically relevant head anatomy while suppressing non-head artifacts. The correspondence module is decoupled from the point-cloud encoder, enabling the same deformation pipeline to be paired with different backbones, including PointNet, DGCNN, and Point Transformer V3. Across all backbones, TRACE substantially improves surface sampling, topology preservation, and shape-model quality over prior SSM methods, providing a scalable foundation for photograph-based craniosynostosis shape analysis and a framework that may extend to other artifact-contaminated surface scans when an appropriate clean template is available.

0.42

BINDER: A Latent Variable Model for Probabilistic Medical Image Registration

cs.CV ·2026-09-17 ·Stefano Cerri, Amirhossein Hassankhani, Yaël Balbastre, Koen Van Leemput
code/data similarity 0.58
Abstract

We propose a new probabilistic model for general-purpose medical image registration that builds upon the mutual information registration criterion. It centers around a spatial interpolation technique that assumes latent voxel-wise correspondences between the images being registered. By exploiting these latent variables, we derive dedicated optimization and MCMC sampling techniques that only involve closed-form iterative updates. When applied to nonlinear registration, an efficient demons-like optimization algorithm is obtained that shows robust out-of-the-box performance across a variety of monomodal and multimodal registration tasks. We also demonstrate a corresponding sampler that can quantify, for the first time, uncertainty in multimodal registration scenarios with very high-dimensional 3D deformations. Our code, which we call BINDER (Bayesian INference for DEformable Registration), is freely available at https://github.com/ste93ste/BINDER.

0.28

Coupled Optimal Transport with Landmark Constraints

cs.CV ·2026-08-20 ·Xiang Gu, Jian Sun, Zongben Xu
similarity 0.58
Abstract

Existing optimal transport (OT) models primarily seek an OT map or plan between distributions by minimizing a prescribed transport cost or distortion. However, minimizing transport cost or distortion alone may fail to identify a geometrically meaningful transformation between the two distributions. To address this limitation, this paper proposes a novel coupled OT framework that leverages a small number of annotated landmarks to guide the recovery of an underlying deformation governing the distribution transformation. The coupled OT framework integrates the optimization of the transport plan and the deformation field into a unified model, where the landmark-guided deformation field and the cost-driven transport plan are coupled through a mutual-consistency constraint. As a result, the deformation is jointly determined by the annotated landmarks and cost-driven distribution matching. The proposed framework provides a principled connection between landmark-based registration and transport-based distribution matching, enabling the recovery of transport maps from sparse geometric supervision. We establish the well-definedness of the proposed model in a general variational setting and develop a finite-element-based numerical algorithm for computation whose convergence properties are systematically analyzed. The practical effectiveness of the proposed approach is verified in shape matching.

0.24

TokenMatch: 3D Mesh Correspondence Transformer with Curvature-Guided Tokenisation

cs.CV ·2026-09-03 ·Adeela Islam, Zorah Lähner, Vittorio Murino, Vladislav Golyanik
code/data similarity 0.58
Abstract · 25 pages, 13 figures and 12 tables; project page: https://4dqv.mpi-inf.mpg.de/TokenMatch/

While data-driven 3D shape correspondence estimation has recently seen substantial progress, robust matching under partial observations and strong non-isometric deformations remains challenging. Existing learning-based approaches often rely on hand-crafted descriptors or template-based representations, whereas recent generative models over functional maps suffer from high inference cost, limited interpretability, and poor generalisation to partial shapes. In response to these limitations, this paper introduces TokenMatch, a new transformer-based unified model for estimating 3D shape correspondences. Our feed-forward approach trained exclusively on BeCoS, a challenging non-isometric partial-to-partial shape-matching dataset, can generalise to matching full shapes without retraining or fine-tuning. TokenMatch uses self- and cross-attention mechanisms to efficiently learn patch-level and point-level relations as well as dense correspondences between shape pairs. Our core insight is that meshes can be adaptively tokenised into patches using shape curvature guidance, enabling effective learning of shape-specific geometric descriptors for correspondence estimation. We evaluate TokenMatch on standard benchmarks for partial and full shape matching, including CP2P, PSMAL, BeCoS, FAUST, SCAPE, and SHREC'19. Our method achieves consistently high performance, in most cases outperforming existing methods for partial and full shape matching in the mean geodesic error and intersection-over-union metrics, while also running faster at sub-second inference speeds.

0.42

Differentiable Mesh State Estimation via Factor Graph Inference for Deformable Object Reconstruction

cs.RO cs.CV ·2026-09-15 ·Lidia Al-Zogbi, Fangjie Li, Samuel Tobin, James Ferguson, Nithesh Kumar +11 more
similarity 0.57
Abstract · 8 pages

Estimating deformable object states remains a fundamental challenge in robotics and simulation. We propose a novel factor graph-based framework for probabilistic mesh state estimation of deformable objects. The method directly updates a tetrahedral mesh, a rich and physically-grounded representation of an environment, by combining physics priors, noisy sensor measurements, and temporal smoothness constraints within a unified probabilistic formulation. The estimation problem is posed as a nonlinear least-squares optimization and solved using Levenberg-Marquardt. Ex vivo central-airway obstruction experiments and simulations on deforming cube models demonstrate reliable and accurate reconstruction under both rigid motion and deformation, highlighting the potential of this probabilistic approach for principled, measurement-driven mesh state estimation in deformable object reconstruction.

0.44

Vision Tomography: Towards Portable 3D Bidirectional Face-Skull Inference from Visual Data

cs.CV ·2026-10-27 ·Zidu Wang, Meng Xu, Miao Xu, Hengyuan Ma, Jiankuo Zhao +3 more
code/data similarity 0.57
Abstract · Submitted to TIP, under review

Traditional computed tomography (CT) can capture paired 3D face and skull geometry, but it remains costly, fixed in location, and exposes patients to radiation. For applications such as remote diagnostics, digital healthcare, forensic identification, missing-person investigation, and archaeological analysis, there is an urgent need for a portable, safe, and accessible solution to capture 3D skull geometry. In this work, we introduce Vision Tomography (VT), a concept and framework capable of reconstructing paired 3D face-skull geometry from various visual modalities, and also enabling joint manipulation of 3D facial and skull geometry. To achieve this, we first construct a dataset of over 200 samples, where each case includes a CT-based skull, a CT-based face, and a high-fidelity textured face scan. Secondly, we propose a novel dense ray matching registration method that ensures topological consistency across face, skull, and their tissue correspondences. Building on this registration, we introduce the 3D Bidirectional Face-Skull Morphable Model (BFSM) as the foundation of Vision Tomography, which enables shape inference between the face and skull through a shared coefficient space, while also modeling tissue thickness variation to support one-to-many facial reconstructions from the same skull, reflecting individual facial changes such as age or body fat. Finally, we demonstrate the effectiveness of Vision Tomography across various forensic and medical applications, including paired 3D face-skull reconstruction from images or sketches and predicting surgical outcomes with joint face-skull editing. Extensive experiments confirm the robustness and accuracy of our method. Vision Tomography is available at https://github.com/wang-zidu/BFSM

0.35

Factorized Gradients for Scalable Highly-expressive Parametric Diffeomorphisms

cs.CV ·2026-10-26 ·Amit Aflalo, Eran Treister, Chaim Baskin, Oren Freifeld
top venue similarity 0.57
Abstract · Accepted by NeurIPS 2026

Diffeomorphisms provide a flexible, topology-preserving mathematical tool for modeling complex spatial or temporal deformations and are used in various scientific fields. However, making these deformations simultaneously highly expressive and computationally efficient remains challenging. Continuous Piecewise-Affine Based (CPAB) transformations (Freifeld et al., ICCV 2015; IEEE TPAMI 2017) offer an attractive solution by parameterizing a family of diffeomorphisms via continuous velocity fields that are piecewise affine with respect to a chosen tessellation of the domain. Importantly, $d=\dim(θ)$, the dimension of the parameter vector $θ$, depends on the fineness of the tessellation rather than on the data resolution. Despite this compact parameterization, CPAB optimization has long been hindered by the tight coupling between trajectory integration and gradient computation with respect to $θ$. We introduce FG-CPAB, a factorized-gradient formulation for scalable CPAB transformations. By separating integration from parameter-space projection, our method reduces gradient computation complexity from $\mathcal{O}(dTN)$ to $\mathcal{O}(TN+dC)$, where $T$ is the number of integration steps, $N$ is the number of transformed points, and $C$ is the number of tessellation cells. This reformulation yields speedups of up to four orders of magnitude (e.g., $\approx 10^4\times$ in 2D), substantial memory savings (e.g., $\approx 500\times$ reduction in peak GPU memory usage in 2D), and dramatically higher expressiveness. This makes fine-tessellation CPAB practical in 2D and 3D for the first time, enabling highly expressive parametric diffeomorphisms.

0.49