CS Paper Radar

TRACE: Artifact-Robust Statistical Shape Modeling from Imperfect Surface Scans - A Case Study in Craniosynostosis 3D Photography

Sanjay Bhandari, Nawazish Khan, Alzbeta Novotna, Tiffany Jeong, Loretta Bowman, Michael Hernandez, Tobi Somorin, Viraj Govani, Jesse Goldstein, Shireen Elhabian

cs.CV cs.AI ·submitted 2026-08-22 23:08 UTC · v1
published

Abstract

Craniosynostosis severity analysis increasingly relies on statistical shape models (SSMs) to quantify cranial morphology, but most existing workflows depend on computed tomography or heavily curated three-dimensional (3D) photographs. Raw clinical 3D photographs provide a radiation-free and repeatable alternative, yet often contain shoulders, hands, hair, clothing, scanner noise, and incomplete boundaries that corrupt correspondences. We introduce the Template-constrained Robust Artifact-aware Correspondence Estimation (TRACE) framework, an unsupervised method for constructing SSMs directly from artifact-contaminated clinical 3D head photographs. TRACE predicts sparse anatomically corresponding head-surface control points from the raw point cloud, refines them through a coarse-to-fine Surface-Aware Deformation cascade, and uses thin-plate spline warping to deform a clean template mesh into a subject-specific head reconstruction. This template-constrained formulation keeps dense correspondences on clinically relevant head anatomy while suppressing non-head artifacts. The correspondence module is decoupled from the point-cloud encoder, enabling the same deformation pipeline to be paired with different backbones, including PointNet, DGCNN, and Point Transformer V3. Across all backbones, TRACE substantially improves surface sampling, topology preservation, and shape-model quality over prior SSM methods, providing a scalable foundation for photograph-based craniosynostosis shape analysis and a framework that may extend to other artifact-contaminated surface scans when an appropriate clean template is available.

Comment
Accepted at ShapeMI workshop at MICCAI 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Vision Tomography: Towards Portable 3D Bidirectional Face-Skull Inference from Visual Data

cs.CV ·2026-10-27 ·Zidu Wang, Meng Xu, Miao Xu, Hengyuan Ma, Jiankuo Zhao +3 more
code/data similarity 0.71
Abstract · Submitted to TIP, under review

Traditional computed tomography (CT) can capture paired 3D face and skull geometry, but it remains costly, fixed in location, and exposes patients to radiation. For applications such as remote diagnostics, digital healthcare, forensic identification, missing-person investigation, and archaeological analysis, there is an urgent need for a portable, safe, and accessible solution to capture 3D skull geometry. In this work, we introduce Vision Tomography (VT), a concept and framework capable of reconstructing paired 3D face-skull geometry from various visual modalities, and also enabling joint manipulation of 3D facial and skull geometry. To achieve this, we first construct a dataset of over 200 samples, where each case includes a CT-based skull, a CT-based face, and a high-fidelity textured face scan. Secondly, we propose a novel dense ray matching registration method that ensures topological consistency across face, skull, and their tissue correspondences. Building on this registration, we introduce the 3D Bidirectional Face-Skull Morphable Model (BFSM) as the foundation of Vision Tomography, which enables shape inference between the face and skull through a shared coefficient space, while also modeling tissue thickness variation to support one-to-many facial reconstructions from the same skull, reflecting individual facial changes such as age or body fat. Finally, we demonstrate the effectiveness of Vision Tomography across various forensic and medical applications, including paired 3D face-skull reconstruction from images or sketches and predicting surgical outcomes with joint face-skull editing. Extensive experiments confirm the robustness and accuracy of our method. Vision Tomography is available at https://github.com/wang-zidu/BFSM

0.35

ACorD: Adaptive Correspondence Discovery for Medical Image Registration

cs.CV cs.AI ·2026-10-19 ·Arghavan Rezvani, Kun Han, Xiaohui Xie
similarity 0.61
Abstract

Medical image registration is a fundamental task for aligning anatomical structures across images. Exhaustively searching for point-wise correspondences is prohibitively expensive in both computation and memory, particularly for high-resolution 3D medical images. Most recent learning-based methods directly predict correspondences in a coarse-to-fine manner, but often propagate intermediate estimates across scales without explicitly weighting correspondence evidence, which can allow coarse-scale errors to persist during refinement. To address these challenges, we propose ACorD, an adaptive correspondence discovery framework designed to mitigate error propagation with an attention-guided process. ACorD first predicts multiple potential correspondence candidates through Correlation-guided Cross-scale Offset Prediction (CCOP), which combines correlation maps as spatial matching priors with cross-scale features as global deformation context. Then, Multi-Head Deformable Aggregation (MHDA) aggregates these candidate correspondences using attention, producing a learned, non-uniform weighting over competing matches rather than treating them equally. The multi-head design further captures complementary deformation patterns, ensuring both global alignment and local precision. By integrating adaptive offset prediction with selective, attention-based aggregation of correspondence evidence, ACorD enables accurate deformation refinement. Extensive experiments on four public medical registration benchmarks demonstrate that adaptive correspondence discovery within a multi-scale refinement framework improves registration robustness across diverse anatomical structures.

0.24

Learning Where to Trust: Reliability-Guided Expert Routing and Velocity Gating for 3D Deformable Registration

cs.AI cs.CV ·2026-10-27 ·Chenyu Guo, Wenjie Dai, Yiqian Chang, Zhiyuan Zhang, Yunfan Wei +4 more
hot direction similarity 0.60
Abstract

Deformable image registration relies on accurate anatomical correspondences. However, explicitly coupling local matching reliability with spatial context selection and deformation update strength remains insufficiently explored in learning-based registration. This challenge is particularly pronounced in homogeneous, weakly textured, and severely deformed regions, where ambiguous matches may induce erroneous deformation updates. We propose ReliMorph, a reliability-routed symmetric framework for 3D deformable registration that couples correspondence assessment with spatial context selection and update strength.Local correlation distributions characterize correspondence ambiguity using shared anatomical features with modality-specific adaptation. These reliability cues guide spatial expert fusion and gate residual velocities during coarse-to-fine refinement. Updated inverse-inconsistency feedback guides routing and gating at finer pyramid levels. To our knowledge, ReliMorph is the first 3D deformable registration framework to jointly condition spatial expert routing and residual velocity gating on correspondence reliability. Extensive experiments demonstrate that ReliMorph consistently outperforms competing methods in anatomical overlap, highlighting its effectiveness across unimodal and multimodal registration tasks.

0.20

Landmark-Free and Scale-Blind Multi-View Registration of Preoperative Liver Models to Intraoperative Surfaces

cs.CV cs.AIcs.HC ·2026-10-16 ·Jiaming Feng, Gerardo Loza Galindo, Shahid Farid, Sharib Ali
similarity 0.59
Abstract · 10 pages

Augmented-reality guidance in laparoscopic liver resection requires aligning preoperative 3D liver models from CT/MRI with intraoperative surfaces. Monocular reconstruction in most cases cannot guarantee scale, albeit rigid-motion registration requires scale as an input. Our proposed framework ``SimCompose'' estimates the full similarity transformation $\Sim$, including scale, without relying on landmarks and applies the same transformation across multiple views with known relative geometry. However, reliable detection of registration failures remains challenging in surgical settings, where ground-truth alignment is generally unavailable. For this, we propose a geometry-based selector that evaluates candidate transformations without requiring ground truth. Large disagreement among these transformations is used to flag potentially unreliable registrations. Finally, we propose to use a non-rigid refinement based on a low-dimensional deformation model from Neo-Hookean simulations in the Simulation Open Framework Architecture (SOFA), without additional network training. SimCompose is trained exclusively on synthetic partial views. Its encoder processes point clouds normalised to a unit root-mean-square radius, without access to metric scale, and filters each view before multi-view fusion. Evaluation on unseen synthetic data (300 single-view pairs per run; 100 three-view registrations) shows that multi-view integration and candidate selection increase the success rate under stringent $\Sim$ accuracy criteria from 38.4% for a single-view, single-method configuration to 77%. Existing learning-based baselines do not satisfy these criteria even when provided with the exact scale. On five in-vivo patients with 92 keyframes, the rigid registration stage reduces surface error more than three-fold relative to learning-based baselines with external scale information.

0.12

CAST: Calibrating Correspondences for Training-Free Biomedical In-Context Segmentation

cs.CV ·2026-11-17 ·Mingze Jiang, Jiashu Han, Haonan Chen, Zhiyi Li, Yilun Du +1 more
similarity 0.59
Abstract · 10 pages, 6 figures

Biomedical image segmentation must keep up with new anatomical structures, subjects, imaging modalities, and acquisition protocols, yet dense expert annotations are scarce and models trained on one cohort often struggle to transfer. In-context segmentation (ICS) offers a way out: a new structure is specified by a few annotated exemplars at inference time. However, reliable correspondence remains challenging in biomedical images, where adjacent structures often share similar appearances, and variations across subjects and imaging conditions further obscure their distinctions. We introduce CAST, a training-free framework built on a frozen DINOv3 backbone to calibrate fine-grained correspondences. Its stability test improves feature reliability at both global and patch-specific levels, while its coherence test assesses whether candidate correspondences are supported by consistent local structural context. Together, these tests enable more reliable correspondence across diverse anatomical structures and imaging conditions. Across eight biomedical benchmarks spanning 2D and 3D segmentation, cross-subject, and cross-modality transfer, CAST outperforms the strongest overall baseline by 12.34 percentage points in Dice and ranks first across all six volumetric settings. The versatility of CAST further opens up opportunities for challenging biomedical applications, including 2D-to-3D segmentation and atlas label transfer.

0.23

Surface-to-Skeleton 3D Cephalometry: Estimating Hidden Skeletal Landmarks from CT-Derived External Soft-Tissue Surfaces

cs.CV ·2026-08-12 ·Tomoki Abe, Taiki Kanaya, Kazuki Saita, Mao Noda, Chie Tachiki +2 more
published similarity 0.59
Abstract · Accepted to AI4M3D Workshop at ECCV 2026

Existing 3D facial-landmark methods localize points on visible skin, but whether CT-defined internal skeletal landmarks can be inferred from external soft-tissue geometry remains unclear. We formulate a coordinate-consistent surface-to-skeleton task using same-acquisition CT-derived surfaces, separating estimation from optical-to-CT registration, scanner-domain, and acquisition-state effects, with coverage analyzed separately. From 240 clinical CT scans from two hospitals, we construct a locked retrospective protocol pairing CT-derived external soft-tissue point clouds with 21 skeletal landmarks and three visible soft-tissue landmarks. An integrated hierarchical point-cloud model achieves 2.97 mm mean radial error on skeletal landmarks and 3.03 mm on deep or surface-invisible landmarks in 40 held-out patients. Patient-mismatch controls support patient-specific signal beyond a fixed population configuration or global similarity alone, while coverage ablations indicate dependence on non-anterior geometry. Optical-transfer diagnostics reveal substantial coverage-related and global-configuration components, although deployable optical inference remains unresolved. These results answer the controlled feasibility question affirmatively and provide a basis for hidden skeletal landmark inference.

0.20

UBone3D: Physics-Rectified Conditional Flow Matching for Anatomical 3D Shape Completion from Ultrasound

cs.CV eess.IV ·2026-09-10 ·Weiying Chen, Yuchong Gao, Siyuan Li, Marek Reformat, Rui Zheng +1 more
top venue similarity 0.59
Abstract · Accepted to ECCV 2026. Camera-ready Author Version

Three-dimensional ultrasound (US) is a safe, radiation-free complementary modality to CT and X-rays for longitudinal monitoring, yet its segmentation-derived partial point clouds are extremely artifact-laden. Consequently, it is challenging to recover a clean and complete anatomical structure from such US point clouds. In this paper, we present UBone3D, a novel framework based on physics-rectified conditional flow matching (CFM) that performs point cloud completion directly from partial US observations. UBone3D models deterministic physics artifacts (e.g., surface thickening, streaking, dropouts) via a simulated physics proxy, and introduces test-time physics rectification to steer the shape completion. At inference, the completion is jointly steered by two decoupled forces: (1) anatomical plausibility enforced by a CT-trained generative shape prior, BoneFM, and (2) physics consistency enforced by USimNet in the ultrasound formation space. Extensive experiments on simulated and in-vivo data demonstrate significant improvements in reconstruction accuracy and anatomical fidelity over existing baselines.

0.40

CUFormer: Modality-Aware CT-Ultrasound Point Cloud Registration for Orthopedic Navigation

cs.CV ·2026-11-01 ·Lixing Tan, Hongye Hao, Tianrun Gu, Qing Xia, Yuting Guo +2 more
similarity 0.59
Abstract

Registering intraoperative Ultrasound (US) bone-surface point clouds to preoperative Computed Tomography (CT) models can support radiation-free orthopedic navigation. Differences in imaging physics produce distinct surface sampling patterns, complicating cross-modal feature matching. Bone strongly reflects ultrasound and casts an acoustic shadow, so US captures only the probe-facing bone surface and leaves most CT points unmatched. This partial coverage makes correspondences ambiguous on near-symmetric bones. We propose CUFormer, a modality-aware registration framework. We introduce a Modality-Aware Transformer (MAT) that encodes input modality through identity embeddings and updates features through modality-specific adapters within a shared geometric matcher. We model imaging visibility and use predicted reference-side visibility to weight coarse and fine correspondences. CUFormer achieves the lowest mean registration errors among evaluated methods on two CT-US datasets, UltraBones100k and UltraBonesHip, and the CT-RGB-D dataset SpineDepth. On UltraBones100k, it reaches mean rotation error 4.53$^\circ$, translation error 3.19\,mm, and Root Mean Squared Error (RMSE) 2.54\,mm, reducing RMSE by 65.8\% relative to the best-performing baseline by this metric. These results demonstrate CUFormer's effectiveness in aligning partial bone surfaces with preoperative CT across anatomical sites.

0.24