CS Paper Radar

A Probabilistic, Rotation-Preserving Kernel Operator Surrogate for Continuum-Robot Design Spaces

Branden Frieden, Alan Kuntz, Varun Shankar

cs.RO cs.LG ·submitted 2026-10-19 15:45 UTC · v1

Abstract

We develop an uncertainty-aware, operator-learning-based surrogate for tendon-driven continuum robots (TDCRs) that generalizes across robot design and actuation while predicting the complete equilibrium configuration. Our central idea is a nonstationary Gaussian-process (GP) kernel whose metric is learned by a shallow neural network from mechanics-aware design coordinates. The network learns how similarity changes across design space, while the resulting kernel defines the design-to-pose operator, its posterior uncertainty, and a criterion for sequential simulator acquisition. We represent backbone position and rotational strain with spatial kernels and reconstruct orientation directly on SO(3), preserving valid material frames and tendon geometry. We use ASkotch with Nystrom preconditioning for scalable kernel operator solves and a separate Nystrom approximation for posterior covariance. Experiments show that kernel-coverage acquisition reduces mean trajectory error by approximately 15% relative to IID sampling, while posterior variance increases for increasingly unsupported designs. Compared with prior neural-operator TDCR models, the method is 30-50% more accurate using approximately 5x fewer training designs while additionally providing posterior uncertainty estimates.

Comment
Submitted to the 2027 IEEE International Conference on Robotics and Automation (ICRA)

Closest papers

Nearest neighbours by meaning across the whole index.

History-Conditioned Flow Matching for Probabilistic Dynamics of Tendon-Driven Continuum Robots

cs.RO ·2026-09-22 ·Hang Yang, Tingcong Liu, Junjie Xiong, Fangju Yang, Ke Wu
similarity 0.69
Abstract

Deterministic dynamics modeling of tendon-driven continuum robots remains challenging owing to uncertainties in material behavior, tendon transmission, friction, and contact. Measured joint configurations and nominal tendon commands do not fully characterize these internal mechanical factors, leaving uncertainty in the subsequent motion. We therefore develop a history-conditioned, physics-informed flow-matching framework for probabilistic dynamics prediction, using motion and actuation histories to predict the distribution of the next complete joint configuration. By recursively sampling next-step configurations under prescribed commands, the model predicts distributions of future whole-body motions. In simulation, scenario-specific models achieve five-second trajectory Energy Scores (lower is better) of 12.05 mm under internal friction variation and 9.29 mm under unobserved actuation disturbances. Relative to the conditional variational autoencoder and diffusion baselines, Flow attains lower Energy Scores and coverage closer to the nominal level in both scenarios. Ablations support history and structural conditioning in both scenarios. On the physical robot, predictions under two tendon-command profiles excluded from training capture the principal motion sequences, with five-second Energy Scores of 11.91 and 11.42 mm, lower than the compared baselines. The predicted-to-measured spread ratios are 1.65 and 1.22 (closer to 1 is better). These results support history-conditioned probabilistic dynamics prediction under incomplete mechanical observations.

0.23

Fast Non-Parametric Heteroscedastic Imitation Learning With Geometric Priors

cs.RO ·2026-10-06 ·Maximilian Mühlbauer, Arne Sachtler, Markus Knauer, Cem Küçükgenç, Yanlong Huang +2 more
similarity 0.63
Abstract

When learning probabilistic policies from human demonstrations, data-efficient learning and fast adaptations to new scenarios are key requirements. One popular way to achieve intuitive and reliable adaptations is through non-parametric, typically kernel-based, methods. However, existing solutions either fail to account for the geometry of manifolds common in robotics, limiting data efficiency, or, when geometry-aware, provide unreliable uncertainty estimates or require retraining to adapt. We propose a non-parametric approach leveraging geometric priors in scenarios of data scarcity and heteroscedastic uncertainties for probabilistic modeling. We utilize the method to formulate policies based on time or robot state, where non-separable diagonal kernels allow capturing uncertainty relations between degrees of freedom for same-sized in- and outputs. Fast updates, requiring less than 3 ms for a trajectory involving both position and orientation are possible through an optimized formulation. Our approach supports both manifold-valued input and manifold-valued output with large orientation changes. Using task parameterization, adaptation to different object poses is easily possible. We evaluate the approach on a set of toy examples and on real robot manipulation tasks both in autonomous execution and in shared control scenarios.

0.21

Tendon-Driven Continuum Robot with Modular Stiffness and In-Situ Self Pose Estimation

cs.RO eess.SY ·2026-09-14 ·Guo Ning Sue, Zheng Cao, Junzhe Hu, Xiangyun Bu, David Quinn +3 more
similarity 0.62
Abstract

Continuum robots enable smooth shape morphing and safe interaction in confined environments. However, most existing systems are task-specific and depend on external sensing infrastructure, limiting their adaptability and real-world deployment. This paper presents a self-contained modular continuum robotic platform that combines mechanical reconfigurability with onboard pose estimation. The robot is constructed from interchangeable continuum joints with analytically precomputed stiffness, allowing rapid assembly and direct programming of the robot shape. Proprioceptive sensing is achieved using magnetic sensors and a modular learning-based framework, where a single model is trained per joint and reused across configurations. The system is experimentally validated in real world, demonstrating self-sensing capabilities and adaptation without external tracking.

0.34

PccDiffuser: Multi-solution Motion Planning for Continuum Robots

cs.RO ·2026-09-09 ·Ke Qiu, Sifan Chen, Si Wang, Rong Xiong, Yue Wang +1 more
hot direction similarity 0.62
Abstract · 8 pages, 8 figures, 1 video

We present the PccDiffuser, a conditional diffusion framework for continuum robots that learns a multimodal distribution over complete configuration-space paths and samples multiple candidate solutions in parallel, which are subsequently converted into an executable trajectory by time allocation considering actuator constraints. Under the piecewise constant-curvature model, we use exponential co-ordinates to describe the robot kinematics, and use graph neural network to encode a variable number of environment obstacles. Analytical differential kinematics is incorporated in the denoising process to improve terminal accuracy and whole-body clearance. On a mixed test set comprising workspace with zero to four obstacles, PccDiffuser achieved a success rate of 91\%. Compared with existing sampling- and optimisation-based benchmarks, it delivered both a higher success rate and greater computational efficiency, with the latter advantage becoming more substantial when sampling more candidate solutions. Experiments on a three-section tendon-driven continuum robot further demonstrate consecutive planning, multi-solution planning, and whole-body obstacle avoidance.

0.35

Constraint-Aware Physics-Informed Neural Networks for Static Shape Estimation of Co-Manipulative Continuum Robots

cs.RO cs.LG ·2026-08-26 ·Rana Danesh, Pari Qarehdaghi, Farrokh Janabi-Sharifi
similarity 0.61
Abstract

Static shape estimation of co-manipulative continuum robots (CCRs) is challenging because the continuum arms and manipulated flexible object form a closed chain that must satisfy both static equilibrium and geometric loop-closure constraints. This paper presents a constraint-aware physics-informed neural network (PINN) for static shape estimation of a tendon-driven CCR modeled using the geometric variable strain formulation. The proposed method incorporates a projected static equilibrium residual and a configuration-level geometric residual to enforce the governing mechanics and closed-chain geometry. In simulation, the PINN is compared with a purely data-driven artificial neural network (ANN) under limited and noisy training data. With 140 samples and 50% label noise, the PINN reduces the relative configuration error, equilibrium residual, and closed-chain residual by 67.88%, 67.35%, and 88.06%, respectively. Using the full dataset, the PINN achieves 0.1597% relative configuration error with an inference time of 0.1773 ms, compared with 17.97 s for an iterative nonlinear solver. Experimental fine-tuning reduces the marker RMSE from 2.657 mm to 0.497 mm and increases R2 from -0.788 to 0.937. These results demonstrate accurate, physically consistent, and computationally efficient static shape estimation of closed-chain CCRs.

0.17

Bridging Language and Physics: Automated Design of Continuum Robots with Large Language Models

cs.RO ·2026-09-08 ·Jingyi Chen, Mohan Zhang, Laura Yao, Yingtai Ni, Jianmin Ji +3 more
publishedbenchmarkcode/data similarity 0.61
Abstract · The first three authors contributed equally to this work

Large language models (LLMs) have recently emerged as a promising tool for automating robot design from high-level specifications, yet they remain ineffective for robots operating under complex physical interactions. This limitation stems from the gap between language-based reasoning and the physical consequences of embodiment, often resulting in designs with low physical validity. In this work, we propose a multi-layered framework, AID-SR, that establishes a closed loop by translating simulator-observed physical states into structured feedback for the LLM designer. Combined with semantic critique, human feedback, and iterative refinement, the framework promotes the generation of physically feasible and functionally meaningful robot designs. We evaluate our approach on tendon-driven continuum robots across a benchmark of 14 tasks spanning reaching, grasping, locomotion, and manipulation. The proposed framework achieves 96.2% rate for passing the simulation feasibility check and by applying a common reinforcement learning training, 26.7% robots can successfully fulfill the corresponding task. We then fabricate three designed robots of AID-SR that successfully complete the task in real-world. These extensive experiments across simulation and real-world environments demonstrate and break the wall of utilizing the LLMs for automated design of continuum robots. The source code and experimental resources are publicly available at https://github.com/UNITES-Lab/AID-SR.

0.70

Bayesian Continuum Robot Dynamics and State Estimation

cs.RO ·2026-09-17 ·James M. Ferguson, Tucker Hermans, Alan Kuntz
similarity 0.61
Abstract · ICRA 2027 preprint

Recent factor graph approaches to continuum robot state estimation have been successful for quasi-static applications and spatiotemporal estimation using white-noise kinematic motion priors. However, when inertial effects are significant, these approximations may fail to capture the underlying physics, limiting accuracy during dynamic motions. In contrast, our approach approximates the Cosserat rod dynamics of continuum robots. We write inertia and damping as equivalent applied loads, so that the dynamic balance retains the algebraic form of the static one from prior work with quasi-static robots. Without backbone observations, the framework reduces to a stochastic forward simulation of the robot's motion. Given observations, it jointly refines kinematic and dynamic states and infers external loads, among other states. We validate the approach through simulation and experiments, demonstrating stochastic forward simulation as well as state estimation on tendon-driven continuum robots.

0.20

Reduced Cartesian Kinetostatics for Tendon-Driven Continuum Robots: Residual-Stabilized Full-Shape Propagation

cs.RO ·2026-09-24 ·Ke Wu, Fangju Yang, Xiaohui Zhang, Zhengqiang Zhang, Jingang Yi +1 more
hot direction similarity 0.60
Abstract

Many planning and control tasks for tendon-driven continuum robots (TDCRs) require the complete Cartesian backbone geometry. We present a reduced Cartesian framework for planar, axially compressible TDCRs that propagates equilibrium configurations along prescribed tendon-force and tendon-displacement trajectories. The backbone is represented by two global position fields. Following exact variation, a Taylor-Galerkin reduction condenses prescribed spatial properties and distributed loads into offline moment vectors, yielding analytic reduced residuals and Jacobians without online spatial quadrature or numerical differentiation. Analytical differentiation and residual correction yield first-order rate systems requiring one fixed-dimensional linear solve per rate evaluation after initial equilibrium alignment on a regular branch. Across four simulated cases covering variable tendon routing, nonuniform geometry, axial compression, and their combined effects, the propagated Cartesian shapes and distributed strains closely match pointwise geometrically variable-strain (GVS) equilibrium solutions. Residual correction suppresses propagation drift across the tested step sizes while adding only about 0.98% to the mean update time of uncorrected Euler. The proposed method requires 0.508 ms per update on average, approximately 11 times faster than pointwise GVS solves. Displacement-driven experiments yield a maximum normalized mean backbone position error of 1.02% and a maximum end-effector position error of 0.28%. These results support efficient and accurate Cartesian full-shape prediction along prescribed actuation paths.

0.30