CS Paper Radar

Tendon-Driven Continuum Robot with Modular Stiffness and In-Situ Self Pose Estimation

Guo Ning Sue, Zheng Cao, Junzhe Hu, Xiangyun Bu, David Quinn, Tiancheng Wu, Zackory Erickson, Carmel Majidi

cs.RO eess.SY ·submitted 2026-09-14 19:21 UTC · v2

Abstract

Continuum robots enable smooth shape morphing and safe interaction in confined environments. However, most existing systems are task-specific and depend on external sensing infrastructure, limiting their adaptability and real-world deployment. This paper presents a self-contained modular continuum robotic platform that combines mechanical reconfigurability with onboard pose estimation. The robot is constructed from interchangeable continuum joints with analytically precomputed stiffness, allowing rapid assembly and direct programming of the robot shape. Proprioceptive sensing is achieved using magnetic sensors and a modular learning-based framework, where a single model is trained per joint and reused across configurations. The system is experimentally validated in real world, demonstrating self-sensing capabilities and adaptation without external tracking.

Closest papers

Nearest neighbours by meaning across the whole index.

Magnetic based In-situ Self 3D Pose Estimation for a Modular Soft Tendon-Driven Continuum Robot via IMU-Fusion

cs.RO eess.SPeess.SY ·2026-09-30 ·Zheng Cao, Guo Ning Sue, Xiangyun Bu, David Quinn, Junzhe Hu +1 more
similarity 0.78
Abstract

Continuum robots are well suited for gentle manipulation because of their inherent compliance and ability to adapt to complex environments. However, their continuously deformable structure makes accurate configuration estimation challenging, particularly when external vision systems are unavailable or obstructed. In this work, we present an embedded pose sensing framework that combines inertial measurement units (IMUs) and active magnetic fields to estimate the robot configuration without relying on external cameras. The angular measurements from the IMU and magnetic-field references are fused to improve local orientation estimation and reduce accumulated orientation error during operation. This pose sensing scheme achieves an update rate of 16.7~Hz, allowing real-time feedback. The proposed system is experimentally validated through closed-loop control, where the estimated robot configuration is used to maintain the end-effector at a desired position while interacting with an object. These results demonstrate the potential of distributed magnetic--inertial sensing for real-time pose estimation and closed-loop control of continuum robots.

0.11

Controlling Continuum Robot Shape in Enclosed Space with Embedded Sensing using IMU and Actuator Feedback

cs.RO ·2026-10-28 ·Jiahe Wang, Sultan Haidar Ali, Eric Weissman, Jiefeng Sun
similarity 0.69
Abstract · 8 pages, 7 figures

Controlling continuum robots' shape to operate in confined, enclosed environments is challenging, since it cannot rely on external observation. Existing embedded shape sensing methods, although they can provide shape reconstruction, are insufficient to enable real-time shape control due to limitations in reconstruction accuracy, computational speed, and compatibility with shape-state representation. In this work, we present an embedded shape-sensing framework that uses readily available IMU and actuator feedback to reconstruct the continuum-robot shape with a neural network, providing accurate shape feedback at $400~\mathrm{Hz}$ for physical closed-loop control. We systematically investigate four key reconstruction design choices: shape-state representation, network architecture, training objective, and sensing inputs, through more than $5{,}000$ trained models on one- and three-segment continuum robots. The selected framework achieves global shape errors of $0.9\%L$ and $1.7\%L$ (of the robot length) for the one- and three-segment systems, respectively. In closed-loop control, one-segment tip tracking achieves a $6.1\%L$ error and three-segment shape control achieves a $2.3\%L$ global shape error, whereas IMU--PCC reconstruction using the same uncompensated measurements fails. Enclosed-space experiments further demonstrate operation without external observation. These results provide a practical framework for translating readily available embedded sensing into high-rate feedback for continuum robot closed-loop control.

0.34

Constraint-Aware Physics-Informed Neural Networks for Static Shape Estimation of Co-Manipulative Continuum Robots

cs.RO cs.LG ·2026-08-26 ·Rana Danesh, Pari Qarehdaghi, Farrokh Janabi-Sharifi
similarity 0.68
Abstract

Static shape estimation of co-manipulative continuum robots (CCRs) is challenging because the continuum arms and manipulated flexible object form a closed chain that must satisfy both static equilibrium and geometric loop-closure constraints. This paper presents a constraint-aware physics-informed neural network (PINN) for static shape estimation of a tendon-driven CCR modeled using the geometric variable strain formulation. The proposed method incorporates a projected static equilibrium residual and a configuration-level geometric residual to enforce the governing mechanics and closed-chain geometry. In simulation, the PINN is compared with a purely data-driven artificial neural network (ANN) under limited and noisy training data. With 140 samples and 50% label noise, the PINN reduces the relative configuration error, equilibrium residual, and closed-chain residual by 67.88%, 67.35%, and 88.06%, respectively. Using the full dataset, the PINN achieves 0.1597% relative configuration error with an inference time of 0.1773 ms, compared with 17.97 s for an iterative nonlinear solver. Experimental fine-tuning reduces the marker RMSE from 2.657 mm to 0.497 mm and increases R2 from -0.788 to 0.937. These results demonstrate accurate, physically consistent, and computationally efficient static shape estimation of closed-chain CCRs.

0.17

Curvature by Design: A Support Structure for Continuum Robots

cs.RO ·2026-11-04 ·Justus Sagemüller, Harald Minde Hansen, Kristin Y. Pettersen
similarity 0.67
Abstract

Constant- and piecewise-constant-curvature models are widely used to simplify the kinematics of continuum robots, although the assumed curvature profiles are not necessarily inherent mechanical properties of the robot and may therefore be violated during operation. Rather than assuming a prescribed curvature profile in the kinematic model and estimating deviations from it, this paper presents a multi-segment scissor-based support structure that mechanically constrains a continuum robot to exhibit prescribed constant or spatially varying curvature profiles. The design uses Taylor approximations to enable an overconstrained multi-joint linkage to predictably distribute global bending among the small-angle movements of multiple flexures. The geometric coupling is realized using compliant flexure joints, enabling the support structure to be manufactured as a single piece. The structure is integrated with a tendon-actuated continuum robot with a flexible backbone. Experiments show that the structure makes the robot resistant to deformations other than the prescribed curvature, significantly enhancing shape precision compared to classical flexible-backbone designs. This constrains the robot from making S-shapes when external loads are applied in the opposite direction of the bending. By mechanically constraining the admissible deformation, the proposed structure reduces the number of independent shape variables that must be estimated.

0.11

SaddleSense: Saddle-Shaped Modules for 3D Shape Sensing with Single-Axis Off-the-Shelf Bend Sensors

cs.RO ·2026-10-31 ·Dong Heon Han, Runze Zuo, Chankyo Kim, Saima Jamal, Daniel Bruder
similarity 0.66
Abstract

Accurate posture feedback is essential for precise control of continuum robots. Off-the-shelf bend sensors measure curvature about only one axis; without a suitable mounting arrangement, they can restrict robot motion and provide incomplete posture information. SaddleSense introduces a 3D-printed thermoplastic polyurethane (TPU) saddle-shaped lattice that holds one commercial bend sensor along each curved edge. Because each sensor flexes within its own channel rather than spanning the segment axially, the lattice converts multi-axis body deformation into sensor curvature without tying segment length to sensor length. Each four-sensor module accommodates two-axis bending, contraction, and extension while quantifying all three deformation modes across its four readings. A hybrid calibration maps the sensor readings to piecewise constant curvature (PCC) parameters using a learned model paired with a physics-based fallback for out-of-distribution inputs. We demonstrate a six-module prototype with 24 off-the-shelf bend sensors on a 430~mm continuum body. Using only each module's four local readings, the physics-based model alone achieves a tip position root mean square error (RMSE) of 29.9~mm (7.0\% of body length). The data-driven model reduces the tip RMSE to 13.2~mm (3.1\%) on held-out samples of motions similar to the training set and 15.8~mm (3.7\%) on separately recorded trials. Reducing each module from four sensors to one nearly triples the tip error.

0.32

Design and Characterization of a Unified Continuum Robot Actuation Platform

cs.RO ·2026-10-14 ·Yunti Xu, Aedan Mangan, Miheer Potdar, Alex Lu, Tania K. Morimoto
similarity 0.64
Abstract

Continuum robots enable dexterous access to confined spaces in applications such as minimally invasive surgery and industrial inspection. However, their actuation systems are often custom-designed for specific robot architectures and tasks, limiting reuse across publications, institutions, and applications. This paper presents a unified actuation platform that decouples actuation hardware and software from continuum robot design. The platform provides modular actuation across continuum robot classes, scales to a large number of degrees of freedom (DOFs), and integrates with conventional serial manipulators for hybrid architectures. We validate the platform on an open-sourced surgical robotic system and experimentally characterize the actuation modules, achieving sub-millimeter translational accuracy and less than $5^\circ$ rotational error over ranges of $30$~mm and $180^\circ$, respectively. We further demonstrate the platform in two surgical use cases: teleoperation of a continuum camera in a constrained environment and bimanual manipulation using $2.53$~mm concentric-tube-robot-based forceps alongside a conventional wristed instrument. All hardware designs and ROS-based software are open-sourced to facilitate reuse and further research in continuum and surgical robotics.

0.31

Bayesian Continuum Robot Dynamics and State Estimation

cs.RO ·2026-09-17 ·James M. Ferguson, Tucker Hermans, Alan Kuntz
similarity 0.64
Abstract · ICRA 2027 preprint

Recent factor graph approaches to continuum robot state estimation have been successful for quasi-static applications and spatiotemporal estimation using white-noise kinematic motion priors. However, when inertial effects are significant, these approximations may fail to capture the underlying physics, limiting accuracy during dynamic motions. In contrast, our approach approximates the Cosserat rod dynamics of continuum robots. We write inertia and damping as equivalent applied loads, so that the dynamic balance retains the algebraic form of the static one from prior work with quasi-static robots. Without backbone observations, the framework reduces to a stochastic forward simulation of the robot's motion. Given observations, it jointly refines kinematic and dynamic states and infers external loads, among other states. We validate the approach through simulation and experiments, demonstrating stochastic forward simulation as well as state estimation on tendon-driven continuum robots.

0.20

Bridging Language and Physics: Automated Design of Continuum Robots with Large Language Models

cs.RO ·2026-09-08 ·Jingyi Chen, Mohan Zhang, Laura Yao, Yingtai Ni, Jianmin Ji +3 more
publishedbenchmarkcode/data similarity 0.63
Abstract · The first three authors contributed equally to this work

Large language models (LLMs) have recently emerged as a promising tool for automating robot design from high-level specifications, yet they remain ineffective for robots operating under complex physical interactions. This limitation stems from the gap between language-based reasoning and the physical consequences of embodiment, often resulting in designs with low physical validity. In this work, we propose a multi-layered framework, AID-SR, that establishes a closed loop by translating simulator-observed physical states into structured feedback for the LLM designer. Combined with semantic critique, human feedback, and iterative refinement, the framework promotes the generation of physically feasible and functionally meaningful robot designs. We evaluate our approach on tendon-driven continuum robots across a benchmark of 14 tasks spanning reaching, grasping, locomotion, and manipulation. The proposed framework achieves 96.2% rate for passing the simulation feasibility check and by applying a common reinforcement learning training, 26.7% robots can successfully fulfill the corresponding task. We then fabricate three designed robots of AID-SR that successfully complete the task in real-world. These extensive experiments across simulation and real-world environments demonstrate and break the wall of utilizing the LLMs for automated design of continuum robots. The source code and experimental resources are publicly available at https://github.com/UNITES-Lab/AID-SR.

0.70