CS Paper Radar

Constraint-Aware Physics-Informed Neural Networks for Static Shape Estimation of Co-Manipulative Continuum Robots

Rana Danesh, Pari Qarehdaghi, Farrokh Janabi-Sharifi

cs.RO cs.LG ·submitted 2026-08-26 18:00 UTC · v1

Abstract

Static shape estimation of co-manipulative continuum robots (CCRs) is challenging because the continuum arms and manipulated flexible object form a closed chain that must satisfy both static equilibrium and geometric loop-closure constraints. This paper presents a constraint-aware physics-informed neural network (PINN) for static shape estimation of a tendon-driven CCR modeled using the geometric variable strain formulation. The proposed method incorporates a projected static equilibrium residual and a configuration-level geometric residual to enforce the governing mechanics and closed-chain geometry. In simulation, the PINN is compared with a purely data-driven artificial neural network (ANN) under limited and noisy training data. With 140 samples and 50% label noise, the PINN reduces the relative configuration error, equilibrium residual, and closed-chain residual by 67.88%, 67.35%, and 88.06%, respectively. Using the full dataset, the PINN achieves 0.1597% relative configuration error with an inference time of 0.1773 ms, compared with 17.97 s for an iterative nonlinear solver. Experimental fine-tuning reduces the marker RMSE from 2.657 mm to 0.497 mm and increases R2 from -0.788 to 0.937. These results demonstrate accurate, physically consistent, and computationally efficient static shape estimation of closed-chain CCRs.

Closest papers

Nearest neighbours by meaning across the whole index.

Tendon-Driven Continuum Robot with Modular Stiffness and In-Situ Self Pose Estimation

cs.RO eess.SY ·2026-09-14 ·Guo Ning Sue, Zheng Cao, Junzhe Hu, Xiangyun Bu, David Quinn +3 more
similarity 0.68
Abstract

Continuum robots enable smooth shape morphing and safe interaction in confined environments. However, most existing systems are task-specific and depend on external sensing infrastructure, limiting their adaptability and real-world deployment. This paper presents a self-contained modular continuum robotic platform that combines mechanical reconfigurability with onboard pose estimation. The robot is constructed from interchangeable continuum joints with analytically precomputed stiffness, allowing rapid assembly and direct programming of the robot shape. Proprioceptive sensing is achieved using magnetic sensors and a modular learning-based framework, where a single model is trained per joint and reused across configurations. The system is experimentally validated in real world, demonstrating self-sensing capabilities and adaptation without external tracking.

0.34

Controlling Continuum Robot Shape in Enclosed Space with Embedded Sensing using IMU and Actuator Feedback

cs.RO ·2026-10-28 ·Jiahe Wang, Sultan Haidar Ali, Eric Weissman, Jiefeng Sun
similarity 0.65
Abstract · 8 pages, 7 figures

Controlling continuum robots' shape to operate in confined, enclosed environments is challenging, since it cannot rely on external observation. Existing embedded shape sensing methods, although they can provide shape reconstruction, are insufficient to enable real-time shape control due to limitations in reconstruction accuracy, computational speed, and compatibility with shape-state representation. In this work, we present an embedded shape-sensing framework that uses readily available IMU and actuator feedback to reconstruct the continuum-robot shape with a neural network, providing accurate shape feedback at $400~\mathrm{Hz}$ for physical closed-loop control. We systematically investigate four key reconstruction design choices: shape-state representation, network architecture, training objective, and sensing inputs, through more than $5{,}000$ trained models on one- and three-segment continuum robots. The selected framework achieves global shape errors of $0.9\%L$ and $1.7\%L$ (of the robot length) for the one- and three-segment systems, respectively. In closed-loop control, one-segment tip tracking achieves a $6.1\%L$ error and three-segment shape control achieves a $2.3\%L$ global shape error, whereas IMU--PCC reconstruction using the same uncompensated measurements fails. Enclosed-space experiments further demonstrate operation without external observation. These results provide a practical framework for translating readily available embedded sensing into high-rate feedback for continuum robot closed-loop control.

0.34

State estimation for a hybrid rigid-continuum space manipulator system

cs.RO ·2026-10-27 ·Lorenzo Ticozzi, Patricio A. Vela, Panagiotis Tsiotras
similarity 0.64
Abstract · 10 pages, 9 figures. Version submitted to "Soft Robotics"

Spacecraft-mounted robotic manipulators can support long-term operability of orbiting assets by conducting tasks such as on-orbit assembly, repair, upgrade, and refueling. In this context, the integration of continuum/soft robotic mechanisms into space manipulator designs promises to reduce stowage volume and mass, as well as to improve operational safety through the inherent mechanical compliance of soft structures. This work presents a novel state reconstruction pipeline for a hybrid soft-rigid space manipulator, in which the distal link is a tendon-driven continuum robot. The estimation problem is formulated as a maximum a posteriori (MAP) inference problem over the hybrid manipulator's configuration, conditioned on discrete, noisy measurements from joint encoders and a vision-based sensing pipeline. The resulting soft-constrained optimization problem is transcribed as a factor graph, providing a compact representation for fusing heterogeneous measurements with the rigid-soft kinematic model. Furthermore, the adoption of the Geometric Variable Strain (GVS) approach yields a minimum-order parameterization of the configuration, a property expected to facilitate model-based feedback control design in future work. The proposed implementation is validated in simulation on a closed-loop trajectory where, for better realism, position measurements for the continuum link are obtained by means of a simulated visual pipeline leveraging synthetic photorealistic images. The state reconstruction accuracy and computational performance confirm the potential of the proposed framework for hybrid soft-rigid robotic applications in orbit.

0.35

Curvature by Design: A Support Structure for Continuum Robots

cs.RO ·2026-11-04 ·Justus Sagemüller, Harald Minde Hansen, Kristin Y. Pettersen
similarity 0.62
Abstract

Constant- and piecewise-constant-curvature models are widely used to simplify the kinematics of continuum robots, although the assumed curvature profiles are not necessarily inherent mechanical properties of the robot and may therefore be violated during operation. Rather than assuming a prescribed curvature profile in the kinematic model and estimating deviations from it, this paper presents a multi-segment scissor-based support structure that mechanically constrains a continuum robot to exhibit prescribed constant or spatially varying curvature profiles. The design uses Taylor approximations to enable an overconstrained multi-joint linkage to predictably distribute global bending among the small-angle movements of multiple flexures. The geometric coupling is realized using compliant flexure joints, enabling the support structure to be manufactured as a single piece. The structure is integrated with a tendon-actuated continuum robot with a flexible backbone. Experiments show that the structure makes the robot resistant to deformations other than the prescribed curvature, significantly enhancing shape precision compared to classical flexible-backbone designs. This constrains the robot from making S-shapes when external loads are applied in the opposite direction of the bending. By mechanically constraining the admissible deformation, the proposed structure reduces the number of independent shape variables that must be estimated.

0.11

A Probabilistic, Rotation-Preserving Kernel Operator Surrogate for Continuum-Robot Design Spaces

cs.RO cs.LG ·2026-10-19 ·Branden Frieden, Alan Kuntz, Varun Shankar
similarity 0.61
Abstract · Submitted to the 2027 IEEE International Conference on Robotics and Automation (ICRA)

We develop an uncertainty-aware, operator-learning-based surrogate for tendon-driven continuum robots (TDCRs) that generalizes across robot design and actuation while predicting the complete equilibrium configuration. Our central idea is a nonstationary Gaussian-process (GP) kernel whose metric is learned by a shallow neural network from mechanics-aware design coordinates. The network learns how similarity changes across design space, while the resulting kernel defines the design-to-pose operator, its posterior uncertainty, and a criterion for sequential simulator acquisition. We represent backbone position and rotational strain with spatial kernels and reconstruct orientation directly on SO(3), preserving valid material frames and tendon geometry. We use ASkotch with Nystrom preconditioning for scalable kernel operator solves and a separate Nystrom approximation for posterior covariance. Experiments show that kernel-coverage acquisition reduces mean trajectory error by approximately 15% relative to IID sampling, while posterior variance increases for increasingly unsupported designs. Compared with prior neural-operator TDCR models, the method is 30-50% more accurate using approximately 5x fewer training designs while additionally providing posterior uncertainty estimates.

0.14

SaddleSense: Saddle-Shaped Modules for 3D Shape Sensing with Single-Axis Off-the-Shelf Bend Sensors

cs.RO ·2026-10-31 ·Dong Heon Han, Runze Zuo, Chankyo Kim, Saima Jamal, Daniel Bruder
similarity 0.61
Abstract

Accurate posture feedback is essential for precise control of continuum robots. Off-the-shelf bend sensors measure curvature about only one axis; without a suitable mounting arrangement, they can restrict robot motion and provide incomplete posture information. SaddleSense introduces a 3D-printed thermoplastic polyurethane (TPU) saddle-shaped lattice that holds one commercial bend sensor along each curved edge. Because each sensor flexes within its own channel rather than spanning the segment axially, the lattice converts multi-axis body deformation into sensor curvature without tying segment length to sensor length. Each four-sensor module accommodates two-axis bending, contraction, and extension while quantifying all three deformation modes across its four readings. A hybrid calibration maps the sensor readings to piecewise constant curvature (PCC) parameters using a learned model paired with a physics-based fallback for out-of-distribution inputs. We demonstrate a six-module prototype with 24 off-the-shelf bend sensors on a 430~mm continuum body. Using only each module's four local readings, the physics-based model alone achieves a tip position root mean square error (RMSE) of 29.9~mm (7.0\% of body length). The data-driven model reduces the tip RMSE to 13.2~mm (3.1\%) on held-out samples of motions similar to the training set and 15.8~mm (3.7\%) on separately recorded trials. Reducing each module from four sensors to one nearly triples the tip error.

0.32

Estimation and Control of Tensegrity Manipulator Kinematics based on Strut Inclination Angles

cs.RO ·2026-09-21 ·Tufail Ahmad Bhat, Shuhei Ikemoto
top venue similarity 0.60
Abstract

Unlike conventional rigid-link robots defined by discrete joints, continuum robots pose a fundamental challenge for expressing their complex continuous bending configurations for closed-loop control. Several modelling approaches have been proposed for conventional continuum robots, but tensegrity-based continuum robots remain largely open. Moreover, many of these approaches assume a continuous elastic backbone and are therefore not directly applicable to tensegrity manipulators, whose bodies are networks of rigid struts and tensioned cables. This work presents a reduced-order model for shape and posture control of a tensegrity-based continuum manipulator. The manipulator is modelled as a serially connected parallel-link mechanism. The proposed method is formulated as an optimization problem that uses geometric constraints of the tensegrity structure together with information from the Inertial Measurement Unit (IMU) sensors embedded in the strut elements. To the best of our knowledge, this work presents the first experimental demonstration of a real-time IMU-based shape estimation method on a full-scale tensegrity manipulator and demonstrates posture control using a simple Proportional-Integral (PI) controller. The results show that the proposed method can estimate the shape of both single-module tensegrity structures and multi-module tensegrity manipulators from arbitrary static configurations and achieve desired postures.

0.48

Learning the Dynamics of Deformable Linear Objects Through Coupled Oscillators for Bimanual Robotic Manipulation

cs.RO ·2026-11-17 ·Iván López-Broceño, Maximilian Stölzle, Daniel Feliu-Talegon, Daniela Rus, Cosimo Della Santina
similarity 0.60
Abstract

Many learning-based approaches for deformable linear objects (DLOs) rely on simplified deformation models that neglect dynamic effects and the mechanical response of the objects, limiting their applicability to lightweight, compliant objects and slow motions. Inspired by recent advances in learning physically structured dynamics with coupled oscillator networks (CONs), we propose $Φ$-CON for learning force-driven DLO dynamics. The model combines a floating-base coupled oscillator network (FBCON), whose latent potential energy depends only on the DLO's shape, with a learned affine diffeomorphism $Φ$ between observed positions along the DLO and latent coordinates. Its shape dynamics are stable by construction, and its Lagrangian structure yields explicit expressions for kinetic and potential energy. We exploit this structure to design a model-based proportional-derivative (PD) controller that compensates for the learned potential forces, thereby establishing closed-loop stability guarantees and ensuring convergence. We evaluate the approach on four simulated DLOs and a real bimanual robot setup. In simulation, $Φ$-CON achieves prediction accuracy comparable to neural ordinary differential equation (NODE) models and Lagrangian neural networks (LNNs), with $97.2\%$ and $90.2\%$ fewer parameters, respectively. Relative to a model-free PD baseline, the proposed controller reduces mean endpoint regulation error by $97.5$-$99.7\%$ in simulation and achieves a mean per-target reduction of $27.9\%$ across both endpoints in real-world experiments, demonstrating the importance of explicitly accounting for the mechanical response of stiff and heavy objects.

0.25