CS Paper Radar

TACS-RF: Tool-driven Agentic Circuit Synthesis of RF and mmWave Modules

Tristan Liang, Aravind Nagulu

cs.AI ·submitted 2026-10-22 20:23 UTC · v2
published

Abstract

We present the framework of TACS-RF - a Tool-driven Agentic Circuit Synthesis of RF and mmWave modules. In this framework, a large-language-model (LLM) coding agent (Claude Opus 4.8) directly drives industry-standard electronic-design-automation (EDA) tools such as Cadence Virtuoso/Spectre, Calibre, Cadence EMX, and Ansys HFSS to design RF and mmWave modules. We validate the framework through the agentic design of a 240-251 GHz sub-THz transmitter in a 90 nm SiGe BiCMOS process. The agent semi-autonomously designed the sub-blocks including a 60 GHz push-push Colpitts VCO with second-harmonic extraction, multistage differential cascode power drivers, a push-push frequency doubler, a differential bowtie antenna, and all the interstage matching networks. The transmitter chain with parasitic-extracted devices and EM-verified passives delivers +5.1 to +6.3 dBm across an 11 GHz varactor-only tuning range, phase noise of -80 to -88 dBc/Hz at 1 MHz offset while consuming a DC power of 361 mW. We describe the agent-driven design flow and the resulting division of labor between human and agent, taking a step toward a "text-to-ASIC" future for designing RF/mmWave hardware.

Comment
Accepted for presentation at the 2027 IEEE Radio and Wireless Week (RWW), Silicon Monolithic Integrated Circuits in RF Systems (SiRF)

Closest papers

Nearest neighbours by meaning across the whole index.

From Prompt to Prototype: Towards a Frontier LLM Driven RF Engineering Workflow

eess.SY ·2026-08-31 ·Markus Heinrichs, Oscar Moschner, Simon Tewes, Volker Wienstroer, Aydin Sezgin +1 more
similarity 0.60
Abstract

Agentic coding environments give a frontier large language model (LLM) direct access to a workstation's terminal, file system, and software. This work demonstrates they extend to professional RF hardware design: an active GNSS L1-band antenna - a circularly polarized patch, surface acoustic wave (SAW) prefilter, and two-stage low-noise amplifier (LNA) on one printed circuit board (PCB) - was designed, optimized, and made manufacturing-ready. The LLM agent autonomously operated CST Studio Suite, Keysight ADS, and KiCad via scripting interfaces. Engineer input was limited to the specification, trade-off decisions, and design reviews. Workflow, results, and the RF engineer's evolving role are discussed.

0.23

RFChipAgent: Multi-Agentic AI Flow for Analog/RF Chip Design

cs.AR cs.AIcs.LGcs.MA+1 ·2026-10-07 ·Awani Khodkumbhe, Yunfei Feng, Raj Rangarajan, Kevin Wang, Kamal Sahota
similarity 0.56
Abstract · 6 pages, 4 figures. Submitted to ACM/IEEE for possible publication

Analog/RF circuits remain the critical interface between digital computation and the physical world, and emerging standards from Wi-Fi 7 to 6G place stringent demands on them, yet analog/RF design remains one of the most labor-intensive steps in chip development. We present RFChipAgent, a first-of-its-kind multi-agent flow of large language model (LLM) agents for end-to-end analog/RF circuit design automation, in which AI agents collaboratively orchestrate the complete design flow under human supervision. RFChipAgent is built around four technical pillars. First, a multimodal retrieval-augmented generation (RAG) subsystem with private per-document FAISS indexing extracts design knowledge from existing engineering documentation. Second, a topology agent drives topology selection, and a schematic and testbench agent automates circuit and testbench assembly. Third, a closed-loop hybrid circuit-sizing engine combines Tree-structured Parzen Estimator (TPE) and CMA-ES optimization, evaluating every candidate in a simulator-in-the-loop framework. Fourth, a trust-scored simulation database accumulates verified performance data and builds an adaptive optimization model that informs subsequent trials. We validate RFChipAgent on a family of GF22FDSOI 60 GHz wideband mm-wave low-noise amplifier (LNA) topologies, demonstrating automated topology generation, specification-driven design-space exploration, and simulator-guided optimization. Experimental results show substantial reductions in design effort while maintaining signoff-quality verification. This work establishes a foundation for LLM-driven multi-agent electronic design automation (EDA) for analog/RF circuits.

0.23

AgenticSizing: A Large Language Model-based Multi-Agent Framework for Analog Circuit Sizing

cs.AI cs.AR ·2026-09-22 ·Yijia Hao, Pratibha Verma, Dongxu Guo, Cristian Sestito, Michael O'Boyle +2 more
benchmarkcode/data similarity 0.51
Abstract

Analog circuit sizing remains a challenging and time-consuming task due to the large design space, strong performance trade-offs, and increasing circuit complexity in scaled technologies. Although recent large language model (LLM)-based methods show promise in improving sample efficiency and interpretability, existing approaches often lack explicit circuit-topology understanding and are mainly evaluated on relatively simple analog building blocks. This paper presents a multi-agent LLM-based framework for complex analog circuit sizing. The proposed framework first analyzes the circuit topology and decomposes the netlist into functional blocks and substructures. It also extracts lightweight design knowledge for reuse. Based on the extracted topology and knowledge, a planner coordinates multiple role-specialized sizing agents to update design variables and achieve global performance specifications. This workflow mimics the collaborative process of an expert analog design team and provides a structured, interpretable, and simulation-driven optimization procedure. The framework was validated on eight circuits, with the largest design containing up to 55 transistors and 60 sizing variables. Notably, for the LDO benchmark, the proposed method achieved a 60\% success rate with an average of 83 iterations, where classical optimizers failed to find feasible solutions. Further, ablation studies demonstrate that topology understanding, design-knowledge infusion, and agent specialization provide complementary benefits. The source code is available to support reproducibility.

0.39

VortexChat: An agentic framework for autonomous multi-objective integrated photonic design

cs.AI physics.optics ·2026-08-21 ·Faqian Chong, Yulun Wu, Shilong Li, Andrew Forbes, Hongsheng Chen +1 more
benchmark similarity 0.48
Abstract

The advancement of modern integrated photonics is frequently bottlenecked by device design workflows that rely heavily on manual simulation and expert intuition. While inverse design offers an alternative, it remains constrained by expert supervision and a lack of end-to-end automation. To address these issues, we present VortexChat, an agentic framework for the autonomous, end-to-end inverse design of integrated photonic devices directly from natural language specifications. VortexChat couples a large language model (LLM) decision agent with topology generation, gradient-based refinement, and full-wave electromagnetic simulation. This closed-loop architecture enables the system to iteratively decompose design objectives, orchestrate computational tools, and update strategies based on feedback with minimal human intervention. Constrained by the absolute metrics of the Vortex100 Benchmark, VortexChat autonomously generates devices that strictly meet all predefined performance thresholds without any human-in-the-loop. As an experimental demonstration, we fabricated a broadband terahertz perfect vortex beam multiplexer, autonomously designed by VortexChat, with measurements confirming high-efficiency operation, high mode purity and low inter-channel crosstalk in agreement with full-wave simulations. These results demonstrate that an LLM agent can assume key aspects of expert decision-making in photonic inverse design while maintaining physical fidelity and fabrication feasibility, providing a scalable route towards autonomous design of complex integrated photonic systems.

0.25

Toward Agentic AI for the 6G Physical Layer: From Algorithm Discovery to Verified Baseband Silicon

cs.AI cs.NIeess.SP ·2026-10-20 ·Eric Mittag, Lukas Brechtel, Maximilian Stark, Hans D. Schotten
similarity 0.48
Abstract · 7 pages, 3 figures, 5 tables. Accepted at the 2026 IEEE Globecom Workshops (GC Wkshps), 2nd Workshop on Agentic AI Empowered Wireless Commun…

6G will be designed faster than it can be built: AI-driven search already proposes physical-layer algorithms at machine speed, while carrying a single one onto embedded baseband silicon remains specialist work. That silicon imposes hard memory and numeric limits, but also exposes cost structures a GPU lacks, and a design flow that never runs on the target sees neither. We present an agentic workflow in which an LLM coding agent implements algorithms on a commercial baseband SoC, optimizes them down to agent-written vector assembly, and validates them on silicon. The agent is guided by a knowledge base of measured platform facts, checked at every step against evaluators it is instructed never to edit, and metered per phase. We showcase the workflow on an AI-discovered orthogonal time frequency space (OTFS) detector portfolio on the open 6G4All platform. It yields twelve kernels that run cycle-exactly on silicon, their optimized versions at 18k-405k cycles (30-660 $μ$s) per frame. It also yields a new detector shaped by the chip's measured costs that needs 13.9% fewer cycles than the port of the discovered detector while matching its error rate, with a measured edge our evaluation cannot statistically resolve, a structure that a hardware-blind search objective had no reason to find. What is not specific to OTFS is the workflow: an LLM agent exploring an implementation space under real hardware limits, with the cost of every choice measured rather than assumed.

0.23

A Frequency-Space Terahertz Transceiver Chip for Multi-Agent Communications and Spatial Awareness

eess.SY physics.app-ph ·2026-08-12 ·Xiaoyue Xia, Zhicheng Lin, Hao Guo, Siran Wang, Jingyuan Zhang +5 more
similarity 0.46
Abstract

Future indoor embodied-intelligence systems require scalable hardware platforms that support both high-capacity multi-agent connectivity and mutual spatial awareness. The terahertz (THz) spectrum offers abundant bandwidth and inherent spatial selectivity for integrated sensing and communication (ISAC); however, conventional phased arrays and programmable metasurfaces rely on dense beamforming networks, element-level control, or external THz illumination, making scalable multibeam operation challenging. Here, we report a fully integrated 208-258GHz 65-nm CMOS THz transceiver chip that monolithically integrates broadband front ends with heterogeneous leaky-wave metasurface (HLM) apertures within a 1.5mm by 4.9mm area. The HLM generates strongly dispersive leaky modes, enabling 75 degree frequency-controlled beam scanning with only four meta-atoms. Co-design of frequency-domain and spatial-domain mixing achieves spectrally clean frequency-to-space mapping for spatial-frequency division multiple access (SFDMA) communication. The THz chip demonstrates multi-agent simultaneous transmission and reception, two-dimensional localization, and sensing-enhanced communication, providing a scalable hardware platform for future THz embodied-intelligence networks.

0.34

OPERA: OPamp Design by an Expert-Taught Reasoning Agent, from Specifications to Layout

cs.AR cs.AI ·2026-10-29 ·Vishal Saxena, Soumyajit Mandal
benchmarkcode/data similarity 0.46
Abstract · 5 pages, 3 figures, submitted to ISCAS 2027

Analog flows from specifications to a signed-off layout rarely run without manual iteration. Recent large language model (LLM) agents size circuits with optimizer loops over the device dimensions and stop at the schematic. We present OPERA (OPamp design by an Expert-taught Reasoning Agent), in which a general-purpose LLM agent designs CMOS opamps from specifications to post-layout sign-off with open-source tools. First, the designer teaches the agent the gm/ID method: map the specifications to transconductances and minimum currents, choose gm/ID per device role from characterized lookup tables, and size from equations, leaving a few knobs to search and an explainable design. Second, the agent learns the gLayout framework and taught layout practice, and writes a reusable layout generator that closes the layout and extraction loop at designer-approved gates. In SKY130, the agent designed a shared constant-gm bias and six opamps (5T, folded-cascode and telescopic OTAs; Miller, folded-cascode and telescopic two-stage) for fun >= 50 MHz, PM >= 60 degrees, SR 25 V/μs into 1 pF and a minimum dc gain of 30 to 60 dB. All six layouts are DRC-clean and LVS-matched, and their extracted netlists meet every target at all 15 PVT corners ( fun >= 53.7 MHz, PM >= 62.1 degrees, SR >= 27.9 V/μs). The benchmark netlists are released at https://github.com/AMPICLab/AMPICBench.

0.66

K-TRAIL: Simulator-Guided Generative Design of EM/RF Circuits

cs.LG ·2026-09-19 ·Piyush Saha, Evan Newell, Hanna O'Leary, Arun Natarajan, Alireza Aghasi
similarity 0.46
Abstract

Inverse design of RF and electromagnetic (EM) circuits is challenging because the relationship between circuit layout and electrical response is non-unique, and full-wave simulation is computationally expensive. This paper presents K-TRAIL, a simulator-guided generative framework for automated EM/RF circuit synthesis. K-TRAIL combines diffusion-based layout generation with derivative-free ensemble Kalman guidance, allowing feedback from a black-box EM simulator to refine candidate layouts during generation without requiring adjoint sensitivities or differentiable solver models. The framework supports both synthesis from prescribed S-parameter responses and synthesis directly from RF performance constraints. Experiments on multi-layer RFIC structures show that simulator-guided generation improves agreement with target responses and can identify structurally distinct layouts that satisfy circuit-level design requirements. The proposed approach provides a practical path toward generative, verification-aware RF circuit design while retaining the flexibility to explore diverse layout topologies.

0.52