CS Paper Radar

Real-to-Sim Calibration of Bosch Etching Simulators with Few-Shot XSEM Data and Hybrid Search

Xinyu Jia, Jainil Shah, Rahul Tripathi, Vijay Gupta, Zhihong Chen

cs.CE cs.LG ·submitted 2026-10-22 20:59 UTC · v1

Abstract

The Bosch process is widely used in MEMS and TSV fabrication, but accurate prediction of etching outcomes remains difficult without calibration against real measurements, which are sparse and costly to obtain. This work presents a few-shot real-to-sim calibration framework that decouples simulator parameters from direct process variables to infer a recipe-specific simulator parameter vector from sparse measurements, enabling reliable prediction of etch depth and sidewall angle under held-out process conditions. We first formulate Bosch profile prediction as a few-shot real-to-sim calibration problem, where a small set of real XSEM measurements is used to identify a recipe-specific ViennaPS parameter vector $z_r^*$ that minimizes the discrepancy between simulated and measured etch depth and sidewall angle. To search this parameter space efficiently, the framework combines local exploration, LLM-guided candidate generation, and XGBoost-based surrogate screening, while retaining ViennaPS simulation as the final verification step for each selected candidate. Experiments on two Bosch etching recipes show that the proposed framework accurately predicts held-out etching results, achieving normalized global errors of 0.340 and 0.249 for the 2 recipes respectively.

Comment
38 pages, 12 figures, 8 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Task-driven sparse-view planar X-ray computed tomography for axial metrology

eess.IV cs.CV ·2026-11-01 ·Yibin Tian, Shuming Yang, Wolfgang Heidrich
similarity 0.53
Abstract

Computational imaging can reduce the acquisition burden when the system is designed around task-relevant information rather than complete image recovery. We investigate this framework for sparse-view planar X-ray tomography (XCT) of layered objects, using measurement of the axial termination gap (ATG) of back-drilled printed-circuit-board (PCB) vias as a representative task. Instead of using 3D reconstruction, the proposed method estimates ATG directly from polychromatic projection data through a physics-based sensitivity model. A gated hierarchical estimator first fits ATG together with radiometric perturbations and selectively introduces global geometry and specimen-warp models only when a reduced chi-squared adequacy test and Bayesian information criterion justify the added degrees of freedom. The same low-dimensional perturbation model is incorporated into marginalized Fisher-information analyses, yielding task-specific conditional and calibration-aware Cram'er-Rao bounds. Numerical experiments show that, under a fixed total photon budget, task-driven metrology changes little over 12-64 views, while reconstruction-driven metrology is strongly view-dependent with much larger errors. The direct estimator also follows the expected photon-limited scaling. These results demonstrate a computational sensing strategy in which XCT acquisition, physical modeling, and inference are evaluated according to the quantitative information required by the task rather than for general-purpose volumetric image fidelity.

0.25

Geo2Gcode: From 3D Geometry to CNC Programs through Structured Machining Primitives

cs.CV ·2026-11-15 ·Sangmin Hong, Dohee Cho, Mohsen Yavartanoo, Kyoung Mu Lee
similarity 0.52
Abstract

Turning a 3D shape into a Computer Numerical Control (CNC) program is still largely manual. For every part, a machinist chooses setups, tools, step-downs, and toolpath patterns. We present Geo2Gcode, which converts a target mesh directly into standard G-code through structured machining primitives. Each primitive couples an indexed machining direction, a closed per-view reconstruction of the target, and explicit tool-radius, layer-height, and clearing-pattern parameters, and compiles deterministically into layerwise toolpaths via signed-distance queries. Most of the fidelity comes from this compiler. A lightweight selector trained with a voxel stock simulator fills in primitive parameters without per-part manual settings, approaching the finest fixed setting at about a quarter of its toolpath length. In simulation on ABC parts, Geo2Gcode reaches roughing fidelity comparable to an expert-tuned commercial CAM setup with a moderately longer toolpath, and clearly improves on a default CAM configuration. Generated programs run in a commercial G-code simulator, and one part is machined on a physical CNC mill. These results demonstrate that roughing programs can be generated directly from geometry without per-part CAM tuning.

0.22

DCM-SAM: Defect-Conditioned Mixture of LoRA Experts for NPU-Deployed AM Defect Segmentation

cs.CV cs.LG ·2026-09-30 ·Md Mushfiqur Rahaman, Md Mahedi Hasan, Imtiaz Ahmed, Srinjoy Das
publishedcode/data similarity 0.51
Abstract · 12 pages, 1 figure, 8 tables. Accepted at the NeurIPS 2026 Workshop on On-Device Intelligence: Foundation Models under Real-World Constraint…

Metal additive manufacturing parts are inspected by X-ray computed tomography, where labelled data is scarce, the pores and inclusions that matter span a few pixels, and inspection must happen at the machine. We present DCM-SAM, a defect-conditioned adaptive mixture of LoRA experts: one frozen Segment Anything backbone carries a separate Conv-LoRA expert bank and mask decoder per defect class, each trained in its own pass, without prompts, on synthetic slices alone, updating only 4.4% of the parameters. On benchmarks that XCT-SAM reports, DCM-SAM improves on every baseline for both classes from a ViT-B backbone against their ViT-H, and reaches 64.2% pore IoU on real NIST scans having seen no real images during training. Deployment then exposes what adaptation work rarely measures: on a Qualcomm Hexagon NPU, ViT-H and ViT-L compile yet cannot allocate at 1024x1024 image resolution, since activations rather than weights exceed the device ceiling, and quantizing weights does not help. ViT-B alone runs, but the adapted encoder then fails to allocate where the stock one succeeds, until a numerically identical rewrite of the attention lets the complete DCM-SAM run in FP16 at 1024x1024, with no operator falling back to the CPU, masks within 0.01% of pixels of the FP32 reference. Code: https://github.com/MushfiqShovon/DCM-SAM.

0.52

Forward and Inverse Virtual Metrology for Phototransistor Gain: A Hierarchical, Uncertainty-Aware Approach for Small Production Datasets

cs.LG cs.CEeess.SY ·2026-08-12 ·Mahshid Amirabgir, Lorenza Ferrario, Paolo Conci, Mahdieh Amirabgir, Giancarlo Orengo
code/data similarity 0.51
Abstract · 43 pages, 15 figures

The customization, optimization and stabilization of the process flow of a silicon bipolar phototransistor commits months of cleanroom time before a finished device can be measured, so a model that predicts device gain from process parameters before a run has value out of proportion to its accuracy. We study this problem on a real fabrication history, thirteen to fourteen process runs of a single device: a small-sample, hierarchically structured setting unlike the large-corpus regime of conventional virtual metrology. Decomposing the variance of device gain, we find that roughly half of it lies between process runs rather than within them, so recipe-only prediction is bounded by construction. Building on these findings we provide a forward gain predictor with a relative, uncertainty-aware signal, an inverse search that returns recipes for a target gain, and, as the foundation for all of it, a multi-level data-quality assessment tailored to the nested physical entities of fabrication (batch, wafer, die) with an explicit cross-level linkage score. The normalized dataset and analysis code are released for full reproducibility.

0.26

RoboFin3D: A Sim-to-Real Platform for Robotic Surface Finishing

cs.RO ·2026-09-29 ·Haowei Wen, Shangtao Li, Vaibhav Sanjay, Philip Huang, Jiaoyang Li +1 more
published similarity 0.51
Abstract · Accepted for poster presentation at the IROS 2026 Workshop on Sim2Real and Classical Control: From Rigorous Theory to Data-Driven Robotics

Grinding and sanding are fundamental processes in industrial robotic surface finishing. However, physical trials are expensive and consume workpieces, making reproducible experiments difficult. We present RoboFin3D, a sim-to-real platform built on Isaac Sim and the Newton physics engine, that provides physics-based grinding and sanding simulation for cheap and repeatable robotic surface finishing experiments. RoboFin3D utilizes a signed distance field (SDF) to model the changing geometry of the workpiece, enabling contact computation, live updates and rendering without an intermediate mesh. It additionally uses a separate surface field to model progressive surface appearance change during sanding. We also introduce WeldGen, a weld sampling module, to generate weld beads on 8,918 real-world workpiece meshes for providing diverse simulation assets. The simulation parameters are calibrated on real experimental results and our evaluation demonstrates our simulation's fidelity against the real world. We also demonstrate that simulation-generated data can be used to improve the performance of perception models. Simulation-only fine-tuning of SAM2 improves IoU for segmentation of unsanded regions from 77.15% to 84.47%, while combined synthetic and real training reaches 97.41%.

0.27

Coarse-to-Fine Macro Placement via Evolutionary Search and Critical Macro Tuning

cs.AR ·2026-09-28 ·Biao Liu, Zhiping Jin, Kaixuan Sun, Zengrui Lu, Qingquan Zhang +1 more
benchmarkcode/data similarity 0.50
Abstract · 18 pages

Macro placement is a critical stage in chip physical design that substantially affects downstream implementation quality. Recent search-based methods improve existing layouts through partial reconstruction, but quality-biased or spatially restricted macro selection can limit the diversity of reconstruction proposals, potentially hindering escape from local optima. Moreover, coarse-grid representations restrict placement precision. To address these challenges, we propose C2FPlace, a \textbf{C}oarse-to-\textbf{F}ine macro \textbf{Place}ment framework that integrates population-based evolutionary search with fine-grained refinement. During coarse-grained optimization, tournament selection chooses promising parents from randomly sampled groups of layouts, and stochastic partial rip-up and re-place generates offspring by sampling macro subsets across the entire layout. A two-phase schedule samples reconstruction ratios from a higher range early in the search and a lower range later, supporting broad exploration followed by more conservative refinement. During fine-grained optimization, critical macro tuning enables positional adjustments beyond the coarse grid to obtain additional half-perimeter wirelength (HPWL) reduction. Experiments on the ISPD2005 benchmark show that C2FPlace reduces HPWL by 17.82\% over EGPlace and 17.86\% over RollPlace on average. On the ICCAD2025 benchmark, C2FPlace achieves the best average ranking among the compared methods under the evaluated power, performance, and area (PPA) metrics. Our codes are available in \href{https://github.com/lxxxxb/C2FPlace}{https://github.com/lxxxxb/C2FPlace}.

0.40

IndustrialCAD-1400: Benchmarking Detailed Industrial Assemblies from Text

cs.AI ·2026-10-17 ·Hebao Zhu, Kang An, Zhuoke Liao, Faqiang Qian, Ziliang Wang +2 more
benchmark similarity 0.50
Abstract

Industrial assemblies require more than a recognizable shape: functional parts, interfaces, dimensions and service features must satisfy a detailed request together. We introduce IndustrialCAD-1400, a text-to-CAD benchmark for this industrial setting. Its 1,400 requests combine 400 equipment categories across 40 domains with 250 four-case design families. Family requests specify a median of 17 named component or configuration roles and six explicit numeric targets; controlled variants test whether dimensions change while shared structure is retained. Task construction draws on documented manufacturer information, owner specifications and engineering guidance. Models generate geometry programs from requests, and a common Blender environment executes them to produce scenes, optional measurements, and standardized views for evaluation. A request assessment of front, isometric, and top views measures visible component, arrangement, and interface fulfillment without requiring a single reference geometry. Five stratified panels preserve complete families while covering the benchmark exactly once, enabling balanced comparisons and separating industrial breadth from controlled numerical responsiveness. In conclusion, IndustrialCAD-1400 extends text-to-CAD from recognizable part geometry to industrial assembly synthesis under joint component, interface, spatial, and numerical specifications.

0.25

Accurate Reconstruction of Gas Turbine Blade Geometry Using 3D/2D Rigid Registration and CT View Optimization

cs.CV ·2026-09-01 ·Hristo Valtchanov, Nicolas Piché, Vladimir Brailovski, Justin Byers, Catherine Désrosiers +1 more
publishedunusual similarity 0.50
Abstract · conference proceedings International Conference on Computed Tomography (iCT) 2025, 8 pages, 6 figures

Non-destructive X-ray and computed tomography (CT) testing are essential for ensuring the dimensional accuracy of manufactured components with complex internal structures, such as the cooling channels in gas turbine blades, which directly affect thermal performance and service life. This study presents a multipart 3D-2D rigid registration approach for aligning CAD models with X-ray projections as an alternative to CT reconstruction for part inspection and measurement. A greedy registration algorithm sequentially aligns the blade's exterior before registering its internal components by maximizing the mutual information between simulated and acquired X-ray images. This stepwise approach reduces problem complexity and improves alignment accuracy. View angles are optimized using a greedy method that iteratively selects angles to minimize dimensional measurement errors. The results indicate that a small number of oblique views provides the best accuracy, although a broad range of angles yields acceptable results. The method achieves subpixel registration accuracy, with errors below one-fifth of the magnified detector-pixel pitch. Image noise and defects reduce registration precision, but direct registration in projection space mitigates these effects compared with CT reconstruction. Appropriate view selection can therefore preserve acceptable subpixel accuracy in the presence of image noise and defects.

0.62