CS Paper Radar

Geometry-Aware Reinforcement Learning for Close-Fitting Wearable Insertion

Takuma Tsukakoshi, Elle Miller, Tamon Miyake, Namiko Saito, Yushi Wang, Shigeki Sugano, Tetsuya Ogata, Sethu Vijayakumar

cs.RO ·submitted 2026-10-23 04:17 UTC · v1

Abstract

Robot-assisted dressing is particularly challenging due to narrow openings and articulated body parts. Even small errors in the relative pose between the body part and garment opening can cause snagging, missed insertion, or incomplete dressing. To address these challenges, we formulate dressing as a geometry-aware insertion problem that represents task-relevant spatial relationships between the body part and object opening, rather than relying on the full deformable-object state. Based on this formulation, we propose a Reinforcement Learning (RL) framework combining a staged curriculum, which progressively guides the policy from coarse alignment to insertion and final placement, with a finger-wise insertion soft gate that provides continuous feedback on individual finger insertion progress and helps suppress premature insertion. We evaluate the framework on rigid and deformable bracelet dressing tasks through component ablations, systematic variations in the initial hand pose, and closed-loop execution of the learned policies on a real robotic system. On the post-training deformable evaluation, the full method reaches 84.7 +- 1.2% success. The insertion gate accounts for the largest gain, and adding the curriculum on top of that gate reaches the top score. On a mannequin hand the same full policy succeeds on 15/20 real-robot trials.

Closest papers

Nearest neighbours by meaning across the whole index.

InsertAnything: Generalizable Contact-Rich Precision Insertion from Simulation to Reality

cs.RO ·2026-09-21 ·Zhenghua Ma, Xinpan Meng, Zeyu Liu, Muyuan Ma, Hengdi Zhang +2 more
benchmarkcode/data similarity 0.70
Abstract

Contact-rich precision insertion is a key manipulation skill in robotic assembly. Tight clearances make insertion more sensitive to alignment errors and prone to collisions and jamming, while variations in geometry and clearance across parts further complicate policy reuse. We present a reinforcement learning framework that trains insertion policies entirely in simulation for direct deployment without real-world demonstrations or policy fine-tuning. By combining target poses with compact three-dimensional fingertip force feedback, the policy learns to search for alignment and correct its motion despite errors in the estimated hole position. A decoupled gated reward coordinates alignment and insertion. Force-signal smoothing and state-independent standard deviations stabilize the learning process. The resulting policies perform real-world insertion across multiple hole geometries with a minimum nominal clearance of 0.02 mm and improve success while reducing peak contact forces under hole-position errors. Cross-clearance and cross-geometry evaluations further confirm policy generalization. The system achieved the first perfect score of 20/20 on ManipulationNet's peg-in-hole benchmark under its Human-in-the-Loop protocol, with fully autonomous insertion motions. A single policy trained only on a simulated hexagonal insertion task achieved an overall success rate of 95.0% across eight unseen real-world insertion tasks. These results show that learning entirely in simulation can yield precision insertion skills that can be deployed directly and reused across real-world tasks. The project website (https://mzhsoul.github.io/InsertAnything/) provides open-source simulation and real-robot experiment scripts, assets, and trained checkpoints.

0.35

Dressing in Motion: A Human Motion-Aware Diffusion Policy for Robot-Assisted Dressing

cs.RO ·2026-09-04 ·Haoxiang Sun, Fangyuan Wang, Songhao Huang, Justina Y. W. Liu, Jihong Zhu +2 more
similarity 0.68
Abstract · 9 pages, 11 figures

Robotic dressing assistance is a promising solution for supporting older adults with physical impairments in daily living. However, dressing under human motion remains challenging, as complex garment--human contact and occlusions make it difficult to generate actions aligned with arm movements. In this letter, we propose a visuomotor policy that learns dressing skills from static expert demonstrations and generalizes to dynamic user-motion scenarios. A diffusion policy tailored to garment--human interaction geometry learns from partially observed point clouds with varied arm postures. We then introduce an object-centric representation based on PDE diffusion to capture the axial distribution of the arm. By sampling motion-relevant regions and registering them across consecutive observations, the proposed method approximates arm motion and reactively adapts the executed trajectory. We evaluate our method in simulation and a real-world human study involving nine participants, three garment types, and six arm-motion patterns. Results show that our method outperforms baselines in dressing progress, freedom of movement, and user comfort. The project website is https://anonymous.4open.science/w/dressing-in-motion.

0.47

PHASE: Compliance-Enabled Tactile Phase Retrieval for Few-Shot Insertion Learning

cs.RO ·2026-09-25 ·Jeremy Siburian, Cristian C. Beltran-Hernandez, Tatsuya Matsushima, Yusuke Iwasawa, Masashi Hamaya +1 more
publishedcode/datahot direction similarity 0.67
Abstract · Accepted ro IROS 2026. Project page: https://omron-sinicx.github.io/phase/

Contact-rich assembly tasks such as peg-in-hole insertion remain difficult to learn from limited demonstrations. While retrieval-augmented imitation learning, which augments target demonstrations with relevant prior data, offers a promising direction, its applicability to contact-rich manipulation remains largely unexplored. Contact-rich insertion unfolds over multiple phases from search to insert, and retrieving phase-specific experience from prior data in principled ways remains an open question. Our key insight is that a compliant wrist enables the robot to sustain contact throughout execution, producing rich tactile and force signals that naturally reveal the phase structure of insertion and inform what should be retrieved. Based on this insight, we present PHASE (PHase-Aware Segmentation and REtrieval), a framework for compliance-enabled tactile phase retrieval that integrates multimodal contact-aware representation learning, variable-length phase segmentation from tactile signals, and phase-consistent retrieval for policy learning. We evaluate PHASE on real-world peg-in-hole insertion across five peg geometries, comparing against retrieval strategies drawn from state-of-the-art methods under a shared policy architecture. PHASE improves the overall success rate by 13 percentage points over the strongest non-phase-aware baseline, and improves performance under unseen initial positions by 30 percentage points. These results demonstrate that aligning retrieval with interaction-defined contact phases substantially improves robustness in few-shot insertion learning.

0.50

DexWeave: Learning Dexterous Humanoid Loco-Manipulation from Human Demonstrations

cs.RO ·2026-09-28 ·Naichuan Sun, Haotian Shen, Yizhang Zhang, Luying Feng, Haoze Wang +3 more
code/data similarity 0.66
Abstract · 26 pages, 6 figures

Learning dexterous humanoid loco-manipulation from human demonstrations requires transferring not only human motion, but also the coordinated interaction structure underlying the demonstrated behavior. This is challenging because embodiment differences distort the coupling among body motion, wrist placement, finger articulation, and object interaction, while kinematically accurate references may still be difficult to realize under robot dynamics. We present DexWeave, a unified framework that connects interaction-consistent motion retargeting with anatomy-aware whole-body policy learning. DexWeave first employs a two-stage retargeting procedure that initializes body and hand motions with specialized solvers and subsequently performs coupled refinement over the upper-body interaction chain while preserving lower-body support. The resulting references are tracked by an anatomy-aware Transformer policy that represents anatomical regions as structured tokens and uses directed masked attention to model their dependencies, with object information selectively conditioning the upper-body pathway for dexterous interaction. The policy jointly outputs body and dexterous-hand actions and is trained directly with reinforcement learning, without pretrained tracking policies, teacher-student distillation, or subsequent residual refinement. DexWeave improves retargeting fidelity and interaction consistency while achieving higher manipulation performance and faster policy convergence than MLP baselines. We further deploy the learned policies on a physical Unitree G1 humanoid equipped with Inspire dexterous hands, demonstrating dexterous whole-body loco-manipulation in the real world. See our project page (https://dexweave.github.io) for videos.

0.50

In-Context Learning World Models for Robot Dual-Arm Manipulation of Soft Garment with Partial Observations

cs.RO ·2026-10-22 ·Hengyi Sim, Quentin Rouxel, Dennis Hong, Darwin Caldwell, Fei Chen
similarity 0.66
Abstract

Robust manipulation of soft objects, such as garments, is a critical skill for service and household robots to adopt, but remains challenging due to its high-dimensional state space, and material-dependent deformations. Humans address this challenge by using mental world models that "imagine" the shape and material properties from partial observations, which enables them to predict how actions affect future states. As such, embedding such world models in robots allows for better generalization in manipulating a wide variety of garments in the real world. However, learned world models typically require large amounts of real world data that is strenuous to collect, and a mechanism to infer latent properties that govern dynamics. We present a Soft-Object World Model that performs generative full-state estimation and action-conditioned dynamics prediction using a transformer backbone trained on large-scale simulated soft object interactions, with measures to mitigate the sim-to-real gap. By learning to infer latent shape and material cues through in-context learning over a variable-length partial point-cloud history, the model generalizes across robot embodiments, material parameters, garment types and shapes, and manipulation coordination modes without weight updates. The world model is then integrated with a Goal-Conditioned action planner for motion synthesis. We validate the approach in simulation and real world for bimanual garment folding, reporting improvements in reconstruction fidelity, prediction accuracy, and task success. Project Website: https://1am5hy.github.io/ICL soft object world model/

0.27

Weave: Learning Whole-Body Dexterous Loco-Manipulation from Human-Object Interactions

cs.RO cs.AIcs.LG ·2026-09-15 ·Liu Cao, Xingze Wu, Jingzhi Cui, Botian Xu, Mingzhi Pei +2 more
similarity 0.66
Abstract · 10 pages, 5 figures. Project website: https://xiaohu-art.github.io/Weave/

Learning humanoid-object interaction requires coordinating whole-body balance, locomotion, and dexterous hand contact to control both robot and object motion. Human demonstrations provide examples of coordinated interaction, but transferring these behaviors to humanoid robots requires learning how to establish and maintain effective contacts under different embodiments and dynamics. We present Weave, a unified framework for learning whole-body dexterous humanoid-object interaction from captured human demonstrations. Weave first converts captured human-object interactions into executable robot-object references through contact-aware retargeting and approach-motion completion. At its core is a contact- and geometry-aware policy that jointly commands 29 body joints and 12 actuated finger joints across multiple objects and interaction sequences. Evaluation across nine objects yields a 92.5% success rate on trained interactions and, without any additional training, 65.0% on sequences never seen during training. We additionally release ~9,000 physically executed rollouts spanning ~23 hours, providing robot-object trajectories with contact annotations for downstream interaction-policy learning and physically consistent HOI motion generation. Project website: https://xiaohu-art.github.io/Weave/

0.57

Grasp2Twist: Learning Bimanual Dexterous Jar Opening by Reinforcement Learning

cs.RO ·2026-09-25 ·Mo Xu, Yunfu Deng, Jianuo Wang, Josiah Hanna, Bilge Mutlu
similarity 0.65
Abstract · 9 pages, 6 figures. Under review

This paper presents Grasp2Twist, a bimanual dexterous manipulation system that learns to grasp and twist open jar lids using reinforcement learning. Learning this task raises three challenges: learning a unified policy for a multi-stage task, sustaining lid twisting, and sim-to-real transfer. To address the first challenge, we introduce a continuous enclosure measure to guide grasp formation and a binary enclosure indicator to guide the grasp-to-twist transition for unified policy learning. We derive both from the geometric relationship between the object center and the convex hull formed by the hand's palm and fingertips. Kinematic constraints limit how far the hand can rotate the lid with fixed contacts, so sustained twisting requires finger contact reconfiguration. We use a three-stage curriculum to facilitate exploration of these contact changes and also improve robustness for sim-to-real transfer. With our approach, the learned policy demonstrates finger gaiting, reconfiguring hand-object contacts to sustain lid rotation. It transfers zero-shot to the physical system and achieves an 88% task success rate across six household containers, including peanut-butter, vitamin, and instant-coffee jars. Ablations further validate the roles of the geometric enclosure in grasp formation and the curriculum in contact-reconfiguration exploration.

0.27

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.64
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39