CS Paper Radar

VisGeo-PipeTrack: A Visual Geometric Servo Control Framework with MPC-RCAPID Control for UAV-Based Dynamic Pipes Tracking

Zhenyang Gao, Jianlin Chen, Yang Yu, Honghao Shan, Jiale Gao, Ziyan Jia

cs.RO ·submitted 2026-10-26 12:34 UTC · v1
published

Abstract

While unmanned aerial vehicles (UAVs) are increasingly deployed for pipeline inspection, prevailing research predominantly assumes static pipes. In real-world industrial environments, pipes often exhibit dynamic movements, such as vibrations. This imposes more stringent requirements on UAVs' adaptive control and computational efficiency than in static scenarios. Therefore, this paper proposes a servo control framework named VisGeo-PipeTrack, which utilizes geometric constraints to enable UAV tracking of dynamic pipes. To achieve efficient UAV positioning, YOLOv5 is employed to detect labels on the pipe. The positions are derived from visual geometric constraints based on these detected labels to enable precise localization. To address tracking control challenges, a model predictive control based real-time corrected adaptive PID (MPC-RCAPID) controller is proposed. This controller employs the Recursive Least Squares method for real-time model estimation and integrates rolling horizon optimization to dynamically adjust PID parameters. Experiments conducted on both the AirSim simulator and the Tello UAV platform validate the effectiveness of the proposed framework. Simulation comparisons with standard PID, fractional-order PID, adaptive PID, and fuzzy PID demonstrate that MPC-RCAPID achieves the shortest settling time (3.26 s) and the lowest average tracking error (3.52%). In physical experiments on the Tello platform, compared with standard PID control, MPC-RCAPID reduces the average tracking error by 55.52%, 26.72%, and 26.52% across the three test dimensions. These results demonstrate that VisGeo-PipeTrack facilitates efficient autonomous tracking in dynamic pipe environments.

Comment
Submit to IEEE Transactions on Intelligent Transportation Systems IEEE TITS

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Variable-Horizon MPC for Landing a Multirotor UAV on a Moving Platform

eess.SY ·2026-09-28 ·Sander Doodeman, Niels Berkers, Paula Chanfreut, Elena Torta, Duarte Antunes
similarity 0.56
Abstract · Submitted to ICRA 2027

Landing a multirotor Unmanned Aerial Vehicle (UAV) on a moving platform is challenging because a UAV is underactuated and the desired landing state is generally a non-equilibrium state. Shrinking- and variable-horizon approaches are promising for reaching such non-equilibrium targets, but often lack robustness to disturbances. Robust Variable-Horizon Model Predictive Control (VH-MPC) addresses this limitation but is computationally complex for a high-dimensional system such as a multirotor UAV. This paper presents a computationally efficient robust Variable-Horizon MPC method for reaching non-equilibrium targets under bounded disturbances. The online horizon search is restricted to a neighborhood of the previously selected horizon, while maintaining recursive feasibility under bounded disturbances. A fixed robust positively invariant tube provides horizon-independent constraint tightening. By exploiting the differential flatness property of a UAV, this approach is applied to a decoupled linearized system, enabling real-time implementation on an onboard Raspberry Pi 5 at 20 Hz. Simulations show that restricting the horizon search substantially reduces computation with limited impact on the objective, while real-time Gazebo simulations demonstrate the robustness of the method. Physical experiments demonstrate successful landing of a multirotor UAV on a moving Stewart platform.

0.13

Quadrotor Guidance for Tasks along Elliptical Boundary

eess.SY ·2026-10-23 ·Ravi Khandelwal, Ashwini Ratnoo
similarity 0.55
Abstract

This paper presents a guidance method that enables a quadrotor uncrewed aerial vehicle to perform inspection tasks along an elliptical boundary enclosing a structure of interest. The proposed guidance approach leverages a bifurcation theory-based framework that supports multiple inspection tasks, including convergence to a desired viewpoint, switching between viewpoints along the boundary, constant-speed elliptical circumnavigation, and circumnavigation with sectorial dwell-time constraint. Stability analysis of the proposed guidance dynamics establishes convergence of the generated reference trajectories to the desired behavior. The control parameters in the proposed method further allow the settling time of the reference trajectory to be specified for each task. The resulting reference velocity expressions are closed-form and algebraically simple, facilitating practical implementation. A qualitative comparison with existing guidance methods highlights the flexibility of the proposed approach in achieving different inspection tasks through a unified framework, while relying on simpler guidance computations. The proposed guidance method is validated through numerical simulations using a six-degree-of-freedom quadrotor model with model uncertainties, and a cascaded sliding-mode controller that tracks the generated reference trajectories under bounded disturbances.

0.24

An Adaptive Control Architecture for Slope and Terrain Compensation in Autonomous Navigation in Mediterranean Greenhouses

cs.RO ·2026-09-02 ·Fernando Cañadas-Aránega, Dirk Wollherr, José L. Guzmán, José C. Moreno, José L. Blanco-Claraco
similarity 0.53
Abstract

The ability to move stably over terrain with varying slopes and textures is essential for mobile agricultural robots operating in complex and dynamic environments such as greenhouses, where small terrain irregularities can lead to significant navigation errors. This article presents a novel terrain-adaptation strategy based on the carried payload, ensuring accurate and robust trajectory tracking. The proposed approach is based on: (i) the experimental characterization of the most common types of greenhouse soil, concrete, compacted sand, and gravel, and (ii) the direct measurement of terrain slope using the IMU, in order to estimate the force with which this angle affects the motor input. Based on this information, a cascade trajectory-tracking scheme has been designed, consisting of a model-based predictive controller (MPC) in the outer loop and a PI controller in the inner loop. The system incorporates an adaptive feedforward control through gain scheduling approach, capable of adjusting to disturbances caused by variations in slope and terrain type. Simulation results demonstrate that the differential-drive robot achieves a significant improvement both in error indices and in control signal efficiency, highlighting the effectiveness and robustness of the proposed approach.

0.44

MOSAIC-SV: Real-Time Adaptive Identification of Vessel Dynamics for the Control and Deployment of Aquatic Robots

cs.RO ·2026-10-02 ·Wensen Liu, Jerry Peng, Shravani Vedagiri, Aaron M. Johnson
similarity 0.52
Abstract

Model-based control of an aquatic robotic platform depends on a hydrodynamic model that is costly to identify and specific to the hull, payload, and conditions it was measured in. Here, we present MOSAIC-SV, a deployable real-time adaptive dynamics identification and control system that identifies a control-sufficient dynamics model from a spec-sheet engineering prior, without dedicated identification trials, and re-estimates it at every control step of a closed-loop mission while the controller plans on it. A physically admissible unscented Kalman filter re-estimates hydrodynamic, disturbance, and actuator parameters at every control step of the closed-loop mission; while a command-dependent consider projection withholds corrections the current command cannot attribute between actuator effectiveness and external force; and a model predictive path integral controller plans on the current estimate. In simulation on a CyberShip II plant, MOSAIC-SV recovers the transit performance of the calibrated model under static mismatch and transient changes, and stays within 20% of its own transit time at the unscaled prior when its inertia or damping prior is wrong by an order of magnitude. In on-water field trials on the Blue Robotics BlueBoat, a twin-thruster catamaran, MOSAIC-SV transits at least 25% faster and predicts its own motion with at least 56% less error than its frozen engineering prior, including under an unmodeled payload. The same MOSAIC-SV system concept was also feasibly deployed on a 6.3-tonne dual outboard monohull.

0.23

Gaussian Process-Augmented Model Predictive Contouring Control for 6-DoF Trajectory Tracking with a Holonomic AUV

cs.RO ·2026-11-10 ·David Dörner, Giancarlo Troni, Ignacio Torroba, Ivan Stenius
similarity 0.52
Abstract · 8 pages, 8 figures

Small, holonomic Autonomous Underwater Vehicles (AUVs) enable close-range inspection of underwater structures from arbitrary viewpoints, requiring accurate position and attitude tracking under state and input constraints. Model Predictive Contouring Control (MPCC) naturally handles these requirements, but relies on an accurate dynamics model, which is difficult to obtain underwater. In this paper, we present a nonlinear MPCC in all six Degrees of Freedom (DoF) for a holonomic AUV and alleviate the inaccuracies in the dynamics by augmenting the nominal model employed with residual dynamics learned via Gaussian Process (GP) regression. The learned residual is embedded in the optimal control problem through a zero-order robust optimization scheme, which keeps the controller real-time capable at 25 Hz. A simulation ablation shows that residual selection is essential when designing the controller, and simulation and in-water experiments with the Multimodality, Observing, Low-cost, Agile (MOLA) AUV validate the resulting controllers against a nominal MPCC and a field proven Proportional-Integral-Derivative (PID) controller.

0.30

ART of PIV: Agentic Real-Time Particle Image Velocimetry for Active Flow Control

cs.AI physics.flu-dyncs.CV ·2026-10-30 ·Antonio Terpin, Francesco Banelli, Alan Bonomi, Raffaello D'Andrea
similarity 0.52
Abstract

Particle image velocimetry (PIV) measures fluid motion from images of tracer particles, but its accuracy depends on choices throughout the estimation pipeline, including image preprocessing, flow estimation, and postprocessing. These choices are typically left to expert tuning, and a fixed configuration can become less accurate as conditions change. This matters especially when PIV supplies feedback for real-time control, where measurements must be both accurate and fast, and flow conditions vary. We introduce ART of PIV -- short for Agentic Real-Time and also a nod to the art of tuning a PIV pipeline -- which automates pipeline choice for each image pair. A learned agent selects a configuration according to a chosen measurement objective from a library assembled for a specified speed budget. Across cross-correlation, classical optical-flow, and learning-based estimators, ART of PIV reduces average end-point error (AEPE) by 12.2-22.4 % relative to the best single estimator at matched speed, with gains extending to 1000-4000 image pair/s. In a simulated local velocity regulation task, it reduces mean normalized closed-loop cost by 13.24-13.59 percentage points relative to a tuned fixed estimator, with the same classical controller in both cases. In a tabletop water channel, we illustrate two ways to tune ART of PIV for a fluidic pinball of three rotating cylinders: selecting between complementary optical-flow tunings for accuracy, and selecting regions of interest with coherent rotation or shear using a common flow estimator. For the first variant, we train a DreamerV3 reinforcement learning controller directly in the physical world and demonstrate tracking of a prescribed flow field in the wake of a fluidic pinball.

0.34

A Novel Path-Tracking Algorithm for Automated Tractor-Trailer Forward and Backward Maneuvers

cs.RO eess.SY ·2026-09-18 ·Alexandre Lombard, Florent Perronnet, Théo Rigal, Nicolas Gaud, Abdeljalil Abbas-Turki
similarity 0.51
Abstract

Fully autonomous tractor-trailer systems are increasingly deployed in logistics, agriculture, and industrial environments, where precise and robust path-tracking capabilities are essential. However, the articulation between the tractor and the trailer introduces additional nonlinearities and significantly complicates lateral and longitudinal control, particularly during reversing maneuvers. This paper introduces a novel path-tracking algorithm specifically designed for articulated vehicles with a single trailer. The proposed method combines a lateral control law applied at the trailer level with a short-horizon predictive adjustment of the tractor steering angle, ensuring stable convergence toward the desired path in both forward and backward motion. The approach is geometry-based and requires no per-vehicle calibration or training. Simulation studies in a high-fidelity physics simulator show steady-state or final lateral errors of $0.02$--$0.05$~m on straight-line, circular, and reverse docking trajectories, which is of the same order of magnitude as, or lower than, the errors reported in the literature. Real-world experiments on a small-scale tractor--trailer robot, with the whole controller running on a low-cost microcontroller, further confirm the feasibility of the approach, with lateral errors below 13~mm during repeated reverse docking maneuvers despite a pose detection latency of about 200~ms.

0.10

Underwater Visual Target Tracking with Target-Specific Depth Estimation and Adaptive Model-Fusion Predictive Control

cs.RO ·2026-09-17 ·Yuheng Zhou, Haiyang Cheng, Yanqi Feng, Pangkit Fong, Mei Xuan Lee +3 more
similarity 0.51
Abstract · 9 pages,8 figures

Vision-based underwater target tracking is challenged by unreliable depth measurements and unknown target motion. This paper proposes a stereo visual-servoing framework for an autonomous underwater vehicle (AUV). For perception, the framework derives a stable 3D relative state from stereo images through target-specific depth extraction and Kalman filtering. It constructs a target-depth mask from color, disparity, and temporal cues to select reliable target pixels, and then filters the resulting depth measurement and detected image center separately. For control, the framework decouples yaw regulation from translational control, avoiding computationally expensive coupled multi-DOF optimization and enabling real-time translational MPC. The translational controller employs adaptive model-fusion predictive control, combining constant-velocity and zero-velocity target models to accommodate different target-motion patterns. It updates the model weights using historical prediction errors and computes translational commands subject to actuation, following-distance, and field-of-view constraints. Through simulations and real-world experiments, we validate the effectiveness of the proposed framework and show it has better performance than existing frameworks.

0.27