CS Paper Radar

Revisiting Direct Control: A Field Evaluation of Sensor Fusion Efficacy in Teleoperating Full-Scale Autonomous Vehicles via Bird's Eye View

Stanisław Kuczma, Sławomir K. Tadeja, Michał R. Nowicki

cs.RO cs.HC ·submitted 2026-10-26 15:41 UTC · v1
published

Abstract

In autonomous driving, robot teleoperation serves as a critical safety fallback mechanism, requiring operators to assume direct control in the event of system failure. While recent research has pivoted toward high-level supervisory control or simulation-based studies, these approaches often fail to capture the physical dynamics and sensory demands of driving a full-scale vehicle. To address this gap, we evaluated the impact of spatial data representation on operator performance using a real car-sized vehicle in a field experiment with $N = 18$ participants. We compared three visualization interfaces: (i) a standard camera feed baseline, with two bird's-eye views (BEV) from (ii) a raw LiDAR point cloud, and (iii) a sensor fusion of LiDAR and camera data streams. Contrary to prior passive observation studies suggesting that sensor-fusion BEV may hinder awareness, our active-control results demonstrate that such representation significantly outperforms the standard LiDAR BEV in perceived usability ($p \leq 0.0001$) and cognitive task load ($p = 0.01$, NASA-TLX score: 34.58/100) while also being significantly better than the Camera-only view ($p = 0.043$). The fused interface also led to statistically significant reductions in task completion time ($p = 0.0461$) and superior usability (SUS: 77.9/100) compared to those of the Camera-only and LiDAR-only views. By synthesizing objective performance data with comprehensive subjective assessments, we demonstrate that BEV fusion maximizes safety margins while minimizing the operator's mental demand. These findings challenge existing teleoperation conventions and provide an empirically validated approach for designing robust remote piloting systems.

Comment
Accepted at 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

Closest papers

Nearest neighbours by meaning across the whole index.

Case for Vehicle-Edge Collaborative Multi-Sensor Data Fusion for Autonomous Vehicle Teleoperation

cs.NI ·2026-09-21 ·Qixin Zhang, Ajay Kumar Gurumadaiah, Wei Ye, Eman Ramadan, Zhi-Li Zhang
published similarity 0.68
Abstract · Published in the 2026 IFIP Networking Conference (IFIP Networking 2026)

Teleoperation provides a critical safety fallback when autonomous vehicles (AVs) encounter scenarios that are outside their operational design domain. In practice, however, remote operators rely primarily on compressed camera streams over 5G, which often lack depth and spatial geometric cues for safe operation in complex dynamic environments. While multi-sensor fusion can enhance situational awareness, directly transmitting raw camera and LiDAR data is impractical due to 5G uplink bandwidth and latency constraints. In this paper, we propose SHARDED, a collaborative camera-LiDAR perception framework that deploys a feature-level fusion pipeline across the vehicle and edge to reduce uplink traffic while preserving 3D detection and depth estimation accuracy. We further design two complementary mechanisms for SHARDED: (i) A network-aware adaptive feature transmission mechanism that reduces data traffic by 50% on average (peaking at over 95%) compared to raw sensor data, and (ii) a latency-aware positional drift compensation mechanism to mitigate cross-modal misalignment induced by unstable network conditions. Evaluations on the nuScenes dataset and real-world 5G measurement traces show that SHARDED achieves competitive perception quality while reducing uplink bandwidth consumption and end-to-end latency.

0.43

MM-BEV: Enhancing Timeliness by Computing Where and When it Matters

cs.RO cs.CVcs.DCeess.SY ·2026-08-15 ·Liangkai Liu, Kang G. Shin
similarity 0.67
Abstract · 12 pages, 20 figures

Multimodal bird's-eye-view (BEV) perception combines LiDAR depth accuracy with dense camera semantics, but its high computational cost and imperfect sensing conditions make real-time deployment challenging. Existing methods largely compress individual detectors and overlook three opportunities: structured sparsity within camera and LiDAR inputs, timing misalignment between modalities, and the fact that many detected objects do not affect the planner's immediate action. We present MM-BEV, a real-time multimodal BEV system guided by a simple principle: compute where and when it matters. MM-BEV divides perception into mandatory work for safety-critical objects within braking distance of the ego vehicle and with short time-to-collision (TTC), and optional work for less urgent regions. It prioritizes mandatory work and reduces or sheds optional work under tight compute budgets. MM-BEV integrates four mechanisms: (1) a criticality-ranked temporal ROI selector based on motion-extrapolated detections from prior frames; (2) sparse, ROI-aware feature extraction using shared-shape camera crops at context-adaptive resolution and ROI-aware LiDAR voxelization; (3) a latency-aware coordinator that adapts LiDAR sweeps, image resolution, and keyframes according to scene dynamics and TTC; and (4) an asynchronous scheduler that decouples sensing from inference and skips stale frames. On nuScenes, MM-BEV reduces inference latency by 1.96x and end-to-end latency by 2.93x, with no loss in geometry-critical recall and only a 0.2 percentage-point drop in safety-critical recall. On a Clearpath Husky A300 equipped with an Ouster-128 LiDAR, BEV cameras, and a Jetson AGX Orin, MM-BEV further reduces mean latency by 2.11x, demonstrating its potential for real-world autonomous systems.

0.40

Variance-Guided Spatial Attention Fusion for Robust End-to-End Driving under Asymmetric Sensor Degradation

cs.CV cs.RO ·2026-08-25 ·Weizhi Tao, Zengwang Jin, Xiao Wang, Hailong Huang
benchmark similarity 0.65
Abstract · 17 pages, 9 figures, and 4 tables, including supplementary material. Submitted to IEEE Transactions on Vehicular Technology

End-to-end multimodal driving has progressed rapidly by fusing camera and LiDAR streams. Existing pipelines remain fragile under asymmetric sensor degradation, where either an entire modality or only a localized region is corrupted while other regions remain useful. The key difficulty is not simply to add an uncertainty head, but to obtain dense reliability supervision, calibrate this reliability against physical fault severity, and use it before unreliable features bias the planner. We propose Variance-Guided Spatial Attention Fusion (VG-SAF), in which dense heteroscedastic reliability estimates act as interpretable spatial gates. The framework couples three components. First, a physically grounded augmentor simulates representative camera and LiDAR failures and emits a continuous spatial mask, providing dense supervision without additional annotation. Second, modality-specific experts predict per-pixel reliability scales through cross-branch dense distillation in log space, enforcing a monotone severity-to-scale response. Third, calibrated reliability maps drive a hybrid attention mechanism that suppresses unreliable cells with a local spatial gate and arbitrates between modalities through a cross-modal trust softmax. A Laplace uncertainty head emits a systemic waypoint uncertainty scale that signals severe or combined sensor degradation, including severities outside the training ranges. On the CARLA Longest6 benchmark, VG-SAF consistently improves closed-loop robustness over the baselines across camera-only, LiDAR-only, and joint degradation regimes, as measured by driving score, route completion, and infraction score.

0.13

Lightweight and Resource-Efficient Perception for Robotic Guide Dogs

cs.DC cs.CV ·2026-10-02 ·Jinse Kwon, Yoojin Lim, Choonghan Lee, Yongseung Yu, Yongin Kwon +1 more
publishedbenchmark similarity 0.65
Abstract · accepted in ACCV 2026

Robotic guide dogs should understand their surroundings, objects, and potential risks. Prior research has focused on raw sensor data from cameras and 2D or 3D LiDAR, which precisely measure distance points rather than provide a semantic understanding of the scene. While these physical measurements are effective for robot-centric collision avoidance and robot safety, they are not suitable for human-centric guidance. The system should recognize the type and relevance of obstacles and explain them, clearly and actionably, in terms of their spatial relation to the user. We present complete on-device perception modules that fuse a 360 camera and a 2D LiDAR for reliable collision avoidance, with moving-object detection and tracking for human-centric guidance. Finally, in walking-impossible situations, a vision--language model delivers pathway explanations as a safety mechanism to reduce user anxiety. In experiments, verification of fused 360 camera--LiDAR depth shows reliable near-range perception but inherent mid-range bias, while the system as a whole sustained real-time performance under 55 W. On the real-world egocentric GuideDogQA benchmark, our system achieved 83.8\% accuracy, compared with 67.1\% for GPT-4o. These results demonstrate that practical human-centric guidance with real-time on-device inference is feasible even on quadrupeds.

0.21

BEVLight: Generalizable Traffic Signal Control from UAV Bird's-Eye Views

eess.SY cs.LG ·2026-10-29 ·Maonan Wang, Yuxin Cai, Junming Liu, Zhengyan Huang, Yi Yu +3 more
similarity 0.64
Abstract · 27 pages, 15 figures

Learning-based traffic signal control (TSC) has achieved promising performance, but most methods rely on structured traffic states that must be estimated from sensor observations in real deployments. Visual TSC learns signal decisions directly from images, yet existing methods depend on fixed roadside cameras and remain tied to specific intersection configurations and visual domains. UAVs offer on-demand bird's-eye-view (BEV) observations that jointly capture intersection topology and traffic dynamics, making them a promising sensing platform for visual TSC. We present BEVLight, a generalizable TSC framework that directly maps BEV observations to signal actions. BEVLight grounds visual features onto individual lanes and composes them along the junction topology into movement and phase representations, allowing a shared policy to score candidate phases across heterogeneous intersection layouts and signal plans. To train the policy, we develop a web-based virtual teleoperation platform and collect over 5K human control decisions together with their underlying traffic states. Simulator-provided traffic states first supervise lane- and movement-level representations, after which human phase selections and rankings supervise the phase scorer. Re-rendering the recorded trajectories under diverse appearances preserves both forms of supervision and encourages robustness to visual changes. Closed-loop experiments demonstrate zero-shot generalization across traffic demands, signal plans, and intersections: BEVLight reduces average waiting time by 7--9\% relative to perception-to-control visual baselines and matches or outperforms structured-state RL controllers that receive ground-truth traffic states, achieving the lowest waiting time in 12 of 16 scenarios. An offline study further shows that BEVLight transfers to real UAV observations without target-domain adaptation.

0.23

Closed-Loop Evaluation of Bird's-Eye-View Maps from Cross-View Transformers as Inputs to Behavior-Cloning Policies

cs.RO cs.AIcs.CV ·2026-09-05 ·Felipe Carlos dos Santos, Eric Antonelo, Gustavo Claudio Karl Couto
similarity 0.64
Abstract

In autonomous driving, Bird's-Eye View (BEV) representations provide a structured, top-down abstraction of the vehicle's surroundings and have become a key input modality for Behavioral Cloning (BC) policies. While ground-truth BEV maps are readily available in simulation, real-world deployment requires replacing them with camera-predicted counterparts - a substitution that introduces perceptual errors whose downstream impact on closed-loop driving performance is not well understood. In this work, we investigate the use of Cross-View Transformer (CVT)-predicted BEV maps as direct policy inputs for a BC agent in the CARLA simulator. We propose a six-channel BEV representation covering road surface, planned route, lane boundaries, vehicles, pedestrians, and traffic lights, and introduce a Kernel Density Estimation (KDE) weighting scheme that rebalances the segmentation loss towards underrepresented driving maneuvers such as curves and intersections. Closed-loop evaluation across two CARLA towns shows that the KDE-weighted model is the only predicted-BEV agent to complete a full episode without infractions, despite not achieving the highest aggregate IoU. This discrepancy reveals that global segmentation metrics are poor proxies for driving performance: what determines navigation success is prediction quality at geometrically critical locations, and the route channel emerges as the primary bottleneck for reliable agent navigation under predicted BEV inputs.

0.25

Investigating Behavior Cloning from Few Demonstrations for Autonomous Driving based on Bird's-Eye View in Simulated Cities

cs.RO cs.LG ·2026-10-14 ·Eric Aislan Antonelo, Gustavo Claudio Karl Couto, Christian Möller, Pedro Henrique Fernandes
publishedcode/datahighly cited similarity 0.63
Abstract · 14 pages, 6 figures, 2 tables. Accepted manuscript (author version) of the paper published in the proceedings of BRACIS 2024 (34th Brazilian…

This paper investigates the use of Behavior Cloning (BC) for autonomous driving from a bird's-eye view (BEV) perspective in simulated urban environments. BC uses supervised learning to mimic expert driving behaviors. Previous works have applied BC in the CARLA simulator but did not fully address the challenges of traffic light compliance. Our approach enhances BC by integrating a kernel density estimator to adjust training sample weights based on action density, thereby improving the learning of rare but critical actions such as stopping at red lights and accelerating at green lights, specially in scenarios of scarce number of expert demonstrations. Using BEV inputs, which provide an abstract top-down view of the driving environment, our method simplifies the policy learning process. The trained convolutional neural network (CNN) outputs steering and acceleration actions based on these BEV inputs and additional state variables. Experimental results in the CARLA simulator demonstrate that our weighted BC method significantly improves driving performance, achieving higher route completion compared to standard BC. This weighted approach proved to be crucial in learning correct driving behaviors, particularly in test environments not encountered during training, highlighting its potential for enhancing autonomous vehicle navigation.

0.61

HiPFuse: Real-Time LiDAR Semantic Segmentation for Robotic Perception on Edge Devices

cs.CV cs.RO ·2026-11-10 ·Haiyang Wu, George Vosselman, Ville Lehtola
code/data similarity 0.62
Abstract · 13 pages, 6 figures

Real-time robotic perception requires accurate LiDAR semantics under limited resources. Bird's-eye-view (BEV) aggregation is efficient but can mix differently labeled surfaces in columns. We present HiPFuse, a point-BEV fusion framework that exchanges point and height-partitioned BEV features across horizontal scales, combining point-wise detail with 2D spatial context from one LiDAR scan. Fixed height assignments preserve separate vertical aggregation groups, with auxiliary supervision of initial BEV features using targets from the same 3D cells. A dual-scale BEV context module adds broader context from a coarser grid. On SemanticKITTI and MCD, HiPFuse achieves 63.7% and 62.5% mIoU at 14.2 and 22.4 FPS on Jetson AGX Orin, respectively, exceeding the 10 Hz scan rate. Separate training and evaluation show indoor applicability. Replacing only the baseline semantic front end with HiPFuse in fixed robotic systems reduces odometry absolute trajectory error RMSE by 10.6% on average across two outdoor sequences and increases accepted-loop recall by 8.7 percentage points on SemanticKITTI. Qualitative semantic maps show more continuous road labeling. Our code is available at https://github.com/haiyang2022/HiPFuse.

0.35