CS Paper Radar

FedAvgIm: Federated Learning for Multi-Site Impedance Identification of Inverter-Based Resources

Quang Manh Hoang, Guilherme Vieira Hollweg, Akhtar Hussain, Wencong Su, Van-Hai Bui

eess.SY ·submitted 2026-10-26 15:50 UTC · v1
top venue

Abstract

With the increasing integration of inverter-based resources (IBRs) into power systems, assessing small-signal interaction stability has become essential. Impedance/admittance models enable frequency-domain characterization of IBR dynamics without requiring access to proprietary internal control details, but measurement-based identification is time-consuming and must be repeated across operating points. This paper proposes FedAvgIm, a privacy-aware federated-learning framework for multi-site dq-admittance identification under severe local data scarcity and raw-data-locality constraints. Each IBR site trains a local feed-forward neural network using a small set of operating-point-frequency samples, while only model parameters are shared with a cloud aggregator that performs sample-size-weighted FedAvg to update a global model and broadcast it back to all sites. To demonstrate effectiveness, EMT measurement-based admittance datasets are constructed for nine grid-following IBRs with different parameters, architectures, measurement-noise levels, and non-IID settings, where each client has only 40-390 training samples. Results show that FedAvgIm achieves performance close to centralized training and consistently outperforms local-only learning and raw-data-locality-preserving transfer-learning baselines. Additional studies show that FedAvgIm maintains stable learning behavior under measurement noise and remains beneficial under moderate non-IID conditions. The estimated dq-admittance models are further applied to generalized Nyquist stability analysis and validated against EMT time-domain simulations under multiple operating points and grid-strength conditions.

Comment
Author-accepted manuscript (not the IEEE version of record)
Journal ref
IEEE Transactions on Smart Grid, vol. 17, no. 6, pp. 5911-5924, Nov. 2026
DOI
10.1109/TSG.2026.3717637

Closest papers

Nearest neighbours by meaning across the whole index.

Machine Learning-Based State Estimation for an Actual Transmission System Using Field PMU Data

eess.SY ·2026-09-22 ·Shiva Moshtagh, Nihar Thakkar, Anamitra Pal, Evangelos Farantatos
published similarity 0.58
Abstract · Accepted for presentation at the 60th Hawaii International Conference on System Sciences (HICSS-60), 2027

Time-synchronized state estimation (SE) plays a critical role in ensuring real-time situational awareness in modern power systems. However, achieving full system observability using phasor measurement units (PMUs) is often impractical due to cost and deployment constraints. Moreover, SE operation at PMU timescales imposes stringent requirements on latency, robustness, and reliability that are difficult to satisfy using conventional iterative hybrid SE techniques under incomplete observability by PMUs. This paper evaluates the feasibility of deploying deep neural networks for PMU-timescale, time-synchronized SE in real-world PMU-unobservable transmission systems using actual data from a US power utility. Key contributions include a systematic assessment of estimation accuracy, scalability, and computational performance under realistic operating conditions.

0.34

Learning-Based Power Flow Estimation with Sparse PMU Deployment in Power Systems

eess.SY ·2026-10-09 ·Van-Hai Bui, Quang Manh Hoang, Akhtar Hussain, Wencong Su
similarity 0.56
Abstract · 14

Accurate monitoring of power flow is fundamental to the secure and reliable operation of modern power systems. Existing data-driven power flow estimation methods typically assume that synchronized measurements are available at every bus, requiring extensive deployment of phasor measurement units (PMUs). Such dense sensing infrastructures substantially increase installation, communication, and maintenance costs. This paper proposes a learning-based framework that minimizes the number of installed PMUs while maintaining high-accuracy systemwide power flow estimation. Instead of relying on measurements from all buses, the proposed method identifies an informative subset of buses whose synchronized measurements are sufficient to accurately reconstruct branch power flow across the network. To this end, a neural network is developed to learn the nonlinear relationship between PMU measurements and system-wide power flows, and multiple PMU deployment scenarios are evaluated to quantify the trade-off between measurement availability and estimation accuracy. The results enable utilities to identify cost-effective PMU placement strategies that balance deployment cost and prediction performance. Case studies on the IEEE 30-bus test system demonstrate that the proposed framework significantly reduces the number of required PMUs while maintaining accurate power flow estimation.

0.18

Initialization Is Critical: Advancing Federated Short-Term Load Forecasting under Load Heterogeneity via Model Initialization

cs.LG eess.SY ·2026-08-28 ·Jianing Chen, Vajiheh Farhadi, Yan Li, Thomas La Porta
code/data similarity 0.56
Abstract

Short-term load forecasting (STLF) provides essential information for numerous applications in modern power systems. However, accurate STLF often relies on fine-grained smart-meter data from distributed users, raising increasing concerns about data privacy. Federated learning (FL) has therefore emerged as a promising privacy-preserving paradigm for STLF. Nevertheless, this paper reveals structured heterogeneity in clients' load data. Specifically, clients exhibit different responses to exogenous factors and distinct temporal load profiles, which can degrade forecasting performance in FL. To mitigate these issues, this paper studies the role of model initialization in federated STLF, and proposes two initialization strategies from global and local perspectives. For global model initialization, when auxiliary public load data are available, a pretrained initialization strategy is developed to initialize the global model before federated training, thereby reducing client drift during the training process. For local model initialization, we propose SLIAvg, a sequential local initialization strategy that promotes a more consistent training process by allowing participating clients to start from progressively adapted models within each communication round. Since the proposed strategies only modify the initialization process, they are compatible with most existing FL frameworks and privacy-enhancing techniques. Experiments on real smart-meter data with two representative forecasting architectures demonstrate that the proposed strategies effectively improve forecasting performance, as evidenced by reduced client drift, improved convergence behavior, and lower forecasting errors.

0.16

SecFD-FL: Frequency-Decoupled Federated Learning with Secure Aggregation for Charging Load Forecasting in Internet of Electric Vehicles

eess.SY ·2026-10-09 ·Mamunur Rashid, Nan Chen, Syed Ali Asad Rizvi, Amiya Nayak
similarity 0.55
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Accurate charging load forecasting is essential for the reliability and efficiency of the Internet of Electric Vehicles (IoEV), yet it is challenging on two fronts: charging demand is highly stochastic, and the data collected by distributed sensors is privacy-sensitive. Although federated learning (FL) preserves data privacy, collaborative training still remains vulnerable to an honest-but-curious server that can invert shared model updates to reconstruct private data. To address both data volatility and privacy concerns, we propose SecFD-FL, a frequency-decoupled federated learning framework for IoEV comprising: 1) a dual-stream gated recurrent unit (GRU) network that separately models short-term and long-term charging load volatility, and 2) a lightweight secure aggregation layer for privacy preservation. Specifically, the secure aggregation layer employs a zero-sum additive masking protocol that perturbs each client's upload with high-variance noise, preventing the server from reconstructing private data while preserving the exact aggregate. Extensive experiments have been conducted on both EV-level and charging station-level using real datasets. The experiment results show that SecFD-FL reduces global RMSE by up to 60% over centralized baselines, achieving Jain's fairness up to 0.991 across clients, and reduces DLG-attack reconstruction correlation by 8 times to 15 times relative to FedAvg -- all with no additional per-round communication cost beyond a one-time key exchange.

0.18

FedGuard-DC: Privacy-Preserving Federated Load Forecasting and Cyber-Attack Detection for Data-Center Loads in Transmission Systems

cs.CR ·2026-08-19 ·Md Kibria Saroare, Md Rubel Ahmed
published similarity 0.55
Abstract · Accepted on North American Power Symposium (NAPS) 2026

The rapid growth of large data-center (DC) loads is creating new challenges for power-system visibility, privacy, and cyber-physical security. System operators need accurate short-term information about these fast-varying loads, while DC operators may avoid sharing raw megawatt measurements because they can reveal sensitive workload and utilization patterns. This paper presents FedGuard-DC, a federated learning (FL) framework for privacy-preserving DC load forecasting and local false-data-injection attack (FDIA) detection. Each DC trains a dual-head model on its own measurements, where a shared encoder supports both a forecasting head and a reconstruction head. A calibrated anomaly score combines forecast residual and reconstruction error to detect corrupted measurements locally. Raw measurements and absolute MW demand remain at each DC, while only model updates, normalized forecast outputs, and scalar attack flags are shared with the global controller. Optional differential privacy and robust trimmed-mean aggregation are included to evaluate privacy-utility behavior and poisoned-client resilience. The framework is validated using phasor-domain simulation data from four large DC loads rated between 150 and 350 MW integrated into the IEEE 39-bus New England system. Results show a 0.5 s-ahead normalized forecast RMSE of 0.023-0.038 pu, compared with 0.32-0.34 pu for persistence. FedGuard-DC detects FDIA with ROC-AUC of 0.979, F1 = 0.930, and precision of 0.988, while robust aggregation reduces the poisoned-client RMSE impact from 0.042 to 0.035 pu.

0.25

EvEMTBench: An Open Benchmark for Machine Learning in Power System Protection

eess.SY cs.LG ·2026-09-23 ·Julian Oelhaf, Georg Kordowich, Christian Bergler, Andreas Maier, Johann Jäger +1 more
benchmarkcode/data similarity 0.55
Abstract · 15 pages, 3 figures. Supplementary information included. Code: https://github.com/EvEMTBench/evemtbench-benchmark

Studies of machine-learning-based power system protection are difficult to compare because task definitions, measurement access, data partitions, metrics, and generalization conditions often differ. EvEMTBench addresses this gap with an open, executable, and versioned benchmark that fixes these evaluation choices while leaving model design open. Across four grids spanning 20-345 kV, it defines 12 protection and event-analysis functions instantiated as 24 scored tasks and supports structured evaluation across observability conditions, predefined distribution shifts, and zero-shot and fine-tuned cross-grid transfer. Committed partitions, leakage controls, and reproducible reporting provide a common basis for comparing future methods. A reference evaluation spanning trivial, conventional, feature-based, and deep-learning baselines shows that wider observability is not uniformly beneficial, shifted conditions can reveal failures not apparent in-distribution, and cross-grid transfer is substantially stronger for fault detection than for fault localization. Protection-relevant diagnostics identify failure modes not apparent from primary metrics alone. EvEMTBench therefore makes generalization in machine-learning-based protection an explicit and reproducible evaluation problem.

0.22

Hybrid Quantum-inspired Kolmogorov-Arnold Networks for Privacy-Aware Federated Biosignal Learning

cs.LG cs.AIcs.DCcs.ET+1 ·2026-08-14 ·Chun-Hua Lin, Samuel Yen-Chi Chen, Yu-Chao Hsu, Kuo-Chung Peng, Jiun-Cheng Jiang +5 more
similarity 0.55
Abstract · 7 pages, 4 figures

Electrocardiogram (ECG) recordings are sensitive biomedical data, limiting the ability of hospitals and wearable devices to share raw signals for centralized model training. Federated learning addresses this practical privacy constraint by enabling collaborative model training while keeping raw biosignal data at their respective sources. However, federated ECG classification remains challenging due to limited client-side samples, imbalanced arrhythmia labels, and non-independent and identically distributed (non-IID) data across clients. These constraints require classifiers that are both communication-efficient and robust to cross-client distribution shifts. In this work, we evaluate a hybrid quantum-inspired Kolmogorov-Arnold network (HQKAN) against a multilayer perceptron (MLP) for five-class arrhythmia classification on the MIT-BIH dataset and three-class classification on the INCART dataset under federated averaging (FedAvg). Across multiple client configurations, HQKAN improves most aggregate and minority-class metrics while using 37.35% fewer trainable parameters and reducing communication cost by 24.89% on MIT-BIH; on INCART, it achieves corresponding reductions of 44.81% and 36.41%. These results indicate that HQKAN offers a compact, communication-efficient and robust alternative to the MLP baseline for privacy-aware federated learning on biosignal data.

0.07

Multi-Appliance Non-Intrusive Load Monitoring via Label-Preserving Aggregate Recomposition and Prediction Consistency

cs.LG ·2026-09-16 ·Jiangfeng Liu, Yanfang Fan
similarity 0.55
Abstract

Non-intrusive load monitoring (NILM) estimates appliance power sequences from aggregate power, but models trained on source households commonly lose accuracy in unseen households. Aggregate power also contains loads from other appliances and measurement error, so predictions may depend on the residual background that co-occurs with source-household targets. Time-aligned submetered measurements and the additive decomposition of aggregate power expose a relation unused by window-wise supervision: an aggregate window can be recomposed by replacing only its residual background while preserving all modeled target-appliance power sequences pointwise. We combine label-preserving aggregate recomposition with prediction consistency. Both windows receive complete power and operating-state supervision. For each appliance, disagreement between the two power predictions is penalized only when both satisfy a fixed reliability criterion and only to the extent that it exceeds a fixed margin. The proposed method is implemented using a multi-appliance architecture with two-stage shared-to-specific mixture-of-experts routing. On REDD, UK-DALE, and REFIT, the proposed method lowers appliance-averaged mean absolute error relative to single-window training from 14.75 to 13.14 W, from 8.88 to 8.51 W, and from 15.83 to 14.55 W. Label-preserving aggregate recomposition and prediction consistency are used only during training, and add no inference-time module or parameter.

0.25