CS Paper Radar

Efficient Learning of Mechanism Designs and Compositionality

João Pedro Gandarela, Thiago Rios, Stefan Menzel, André Freitas

cs.AI cs.CE ·submitted 2026-10-29 13:23 UTC · v1

Abstract

Learning mechanism behaviour requires a representation of how connected parts jointly constrain motion. We study whether exposing reusable constraint subassemblies improves prediction from limited data. Assur-KB represents planar mechanisms through irreducible modules, boundary interfaces, and solve dependencies while retaining source geometry. Our theoretical results characterize transfer through module interfaces and establish physical limits arising from missing interface information and accumulated sensitivity. To test the representation claim directly, the experimental design compares matched mechanism-curve pairs across training budgets within the same multilayer-perceptron family. This controlled comparison establishes the utility of the complete representation in the evaluated learning setting. Assur-derived features provide a geometric-mean $1.8\times$ advantage in sample efficiency over flattened adjacency and position inputs across budgets of 50-10,000 mechanisms. Separate experiments establish invariance under tested joint relabelings, higher valid-generation rates under dyadic composition, and a coarser structural index over 10.02 million mechanisms. In summary, the theory and experiments identify how physical constraint structure supports limited-data prediction and which interface conditions govern compositional reuse.

Closest papers

Nearest neighbours by meaning across the whole index.

From Static Models to Editable CAD: A Design-Intent-Aware Framework for Reverse Parametrization

cs.CG ·2026-10-31 ·Yurim Lee, Sumin Lee, Namwoo Kang
similarity 0.63
Abstract

Neutral CAD formats such as STEP typically preserve geometry but not feature histories or parameter dependencies. Thus, they are inherently limited for iterative design that requires modifications, a critical limitation for design optimization that relies on iterative processes. This study presents a design-intent-aware reverse-parametrization framework that converts history-free STEP parts into editable Grasshopper definitions and represents their assembly relations. Without task-specific training, the framework combines kernel-measured features, geometric relations, a compressed attributed adjacency graph, and multiview renderings. An LLM assigns dimensions independent, fixed, or dependent roles, confirms candidate joints, and interprets verification reports. Kernel- and rule-based modules perform measurement, parameter binding, geometry construction, and verification. Evaluation distinguishes default-shape preservation, design-intent reflection, and edit validity, with the latter examined through assembly-level editing examples involving checks for geometry regeneration, joint alignment, interference, and mechanism closure. As an example, five components of a mechanical mechanism were used, and across 25 runs, the mean global and analytic-feature-region intersection over unions (IoUs) were 0.984 and 0.983, respectively; all runs passed the combined shape-preservation criterion. In a separate request experiment, the requested dimension was selected as an independent variable in 19 of 20 runs. Product-level examples show coordinated changes in part geometry and assembly design while preserving assembly relations and avoiding inter-part interference. These results demonstrate editable reconstruction of history-free CAD models under the evaluated geometric and assembly constraints, indicating potential for subsequent design optimization.

0.20

Synthetic Neurosymbolic Task Generation with Controlled Constraint Complexity

cs.LG cs.AIcs.LOcs.NE+1 ·2026-11-14 ·Mykhailo Buleshnyi, Zsolt Zombori, Michael Benedikt
similarity 0.60
Abstract

We introduce NeSySy, a synthetic generator for neurosymbolic learning tasks that jointly produces logical constraints and consistent datasets. Unlike existing benchmarks, NeSySy provides fine-grained control over key properties such as constraint structure, tightness, input dependence, and data generation and alignment strategies. In particular, it allows the use of rich constraints over infinite domains, and uses solvers to ensure that the constraints are meaningful and that generated samples satisfy the constraints. We design NeSySy to support both learning with declarative constraints and learning from distant supervision. Across a range of constraint families, we provide evidence that its parameters induce systematic and largely independent effects on task difficulty. Using NeSySy, we study constraint-aware learning methods, identifying regimes where explicit constraint enforcement is beneficial and where expressive unconstrained models can instead learn constraint structure directly from data. Our results establish NeSySy as a controlled testbed for analysing the interaction between learning and logical structure. NeSySy is built around a pipeline that incorporates solvers. Satisfiability checkers (CNFgen and Z3) generate and certify constraints. Constrained optimizers (RC2 for MaxSAT, Z3 for OMT) compute optimal repairs that guarantee every generated sample is consistent.

0.08

Learning Feasibility-Aware Latent Spaces for Preference-Based Exploration of Procedural Automotive Wheel Designs

cs.HC ·2026-09-01 ·Takashi Owaki, Yuki Koyama, Tomoyasu Nakano, Takahiro Yamaguchi, Masataka Goto +1 more
similarity 0.60
Abstract

Intelligent design interfaces that rely on preference-based optimization are most useful when their suggestions are both meaningful to users and feasible within the target domain. Procedural models offer compact and editable design spaces, but their native parameters can be entangled and can generate many invalid outputs, causing human-in-the-loop optimizers to waste comparisons. We propose an interaction-oriented representation-learning pipeline for procedural models and study it in automotive wheel design. The method first screens procedurally generated samples using geometric rules and finite-element analysis, then learns a reduced latent space from the screened subset. We further introduce supervised functional alignment, which reserves selected latent dimensions for stiffness, strength-related stress response, or weight so that search can be biased toward functionally meaningful regions. Simulation experiments show that screened reduction improves target-shape retrieval and the feasibility rate of suggestions, whereas unscreened reduction degrades both. Additional simulations show that constraining search along learned functional dimensions accelerates exploration toward target functional properties. A controlled study with 40 participants further shows that a 5D feasibility-aware space yields higher shape similarity and more feasible suggestions than the original 9D procedural parameterization. These results suggest that, for intelligent user interfaces in engineering design, the representation exposed to the user is a central part of the interaction design, not merely a preprocessing step for the optimizer.

0.27

AnchorGen: Anchored Optimization for Customizable Generative 3D Design

cs.CV ·2026-10-05 ·Hantao Zhang, Oliver Heinimann, Jieke Wu, Yingxuan You, Emilien Seiler +1 more
hot direction similarity 0.59
Abstract · 29 pages

Engineering design often starts from a 2D sketch that fixes style and proportions, yet the subsequent 3D shape optimization relies on learned generative priors to keep the geometry valid. However, these priors are agnostic to the sketch: while they admit a valid design by correcting a drifted proposal back to its training distribution, they often correct it towards the high-density region, ignoring the specified design. We introduce \emph{AnchorGen}, a rectified-flow framework trained unconditionally on the concatenated shape and sketch latents of paired data. The learned manifold represents the joint distribution of shape-sketch pairs, so constraining the sketch component restricts the iterate to the sub-manifold of shapes consistent with a target style. Since training employs no conditioning signal, the constraint is imposed at inference: gradient descent optimizes the shape latent to minimize a differentiable drag surrogate, while constraining the sketch latent to remain close to the target sketch via a token-wise cosine penalty. A single model thereby supports design-preserving optimization, dimensionally explicit design edits, and sketch-only synthesis.

0.33

ORACLE: Optimizer-Relative Alignment for Constrained LEarning

cs.LG ·2026-10-06 ·Utkarsh Grover, Wyatt Mackey, Kaixun Hua, J. Morris Chang, Xiaomin Lin
similarity 0.59
Abstract

Constraint handling methods typically intervene before the optimizer acts, by modifying the objective or the gradient. Yet momentum, adaptive scaling, and structured preconditioning can substantially reshape that signal before it becomes a parameter update. We formulate optimizer relative constrained learning, where constraint compatibility is assessed on the post optimizer update. Building on this view, we introduce ORACLE, which evaluates the native optimizer's realized step through a joint endpoint linearization of heterogeneous constraint families, constructs the resulting alignment in the optimizer's own geometry, bounds its authority, and commits it only after validation. We evaluate ORACLE across eight Partial Differential Equation benchmarks and four optimizers spanning Euclidean, diagonal adaptive, and structured preconditioned geometries, where it improves or matches native optimizer in 94% of configurations. Cross model analysis shows the same behavior in 92% of configurations, while matched comparisons show improvements over alternative constraint-handling methods acting at the objective, gradient, and post-optimizer levels.

0.15

D-JEPA: Design-Recoverable JEPA Representation with Swappable Physics Decoders

cs.LG cs.AI ·2026-09-27 ·Nitin Nagesh Kulkarni, Aashwin Anand Mishra, Yin Yu, Peter Lyu
similarity 0.58
Abstract

Joint-Embedding Predictive Architectures (JEPAs) provide a framework for learning compact representations without directly reconstructing high-dimensional observations. However, in parameterized physical systems, learned representations can entangle geometry with operating conditions and task-specific physical responses, limiting their reuse across prediction tasks. We introduce D-JEPA (Design-recoverable JEPA), a geometry-centric JEPA that computes a compact representation from geometry alone and reuses it across operating conditions and physical response spaces through lightweight physics-specific decoders. An explicit design-recoverability objective encourages the geometry latent to preserve information about the underlying design variables, enabling the representation to support design analysis and optimization. We further identify a case-level collapse failure mode in which target representations become nearly invariant across distinct geometries despite low reconstruction error, and mitigate it using case-level variation constraints and auxiliary target reconstruction. Across four 3D aerodynamic, hydrodynamic, and structural benchmarks, D-JEPA maintains or improves full-field prediction accuracy while achieving near-perfect linear recoverability of design parameters. The frozen geometry representation can be reused at held-out operating conditions and transferred to a structural response task with fewer trainable parameters. Finally, the representation supports differentiable design optimization, with designs validated using high-fidelity CFD, preserving the predicted ranking of candidate designs. These results demonstrate that separating a reusable geometry representation from physics-specific prediction provides a practical representation for scientific surrogate modeling and design.

0.18

Reconfiguring Procedural Knowledge for Compositional Robot Skill Adaptation

cs.AI ·2026-11-17 ·Daehee Lee, Dongsu Lee, Sanghyun Ahn, Minjong Yoo, Honguk Woo
top venuebenchmark similarity 0.58
Abstract · Accepted at NeurIPS 2026

General-purpose behavior models increasingly internalize broad procedural knowledge during training, making their adaptation to new goals and skill interfaces less a problem of learning entirely new behaviors than of reconfiguring existing competence. We study this capability as reconfigurability, the ability to realize new behaviors by cost-efficiently restructuring existing components and relations under sparse governing information, where task specifications provide high-level goals and procedure specifications expose a limited set of reusable factors, leaving the concrete bindings and compositions required for execution underdetermined. We propose RecPo, a framework that represents skills task-agnostically through multiple procedure views and materializes executable skill sequences by composing stored transitions to realize task-specific changes. RecPo maintains a procedure knowledge base of skill-induced transitions, with each view exposing a reusable factor and preserving local skill connectivity. At deployment, it interprets task specifications through the same views and resolves the resulting compositional queries over the stored relations to bind skills for execution. On long-horizon tasks in an extended Franka Kitchen benchmark, RecPo achieves 91.9% ordered completion with 1.0 ms of task inference per episode across varying procedure support and task-record sparsity. Real-robot studies further demonstrate adaptation through local memory edits without task-specific retraining.

0.37

Automatic assembly modeling through attention-based assembly feature mate prediction and assembly feature pattern recognition

cs.CV cs.CEcs.GR ·2026-10-10 ·Ziheng Dai, Wanbin Pan, Zhihong Tang, Shuming Gao
datasethot direction similarity 0.58
Abstract · 28 pages, 12 figures, 5 tables

Assembly modeling plays an important role in constructing product models, yet it is still mainly performed via interactive operations that are experience-dependent and labor-intensive. Data-driven strategies hold promise for automating this process; however, existing approaches either predict poses that cannot directly generate editable B-Rep assembly constraints or require prescribed part pairs or predefined assembly faces. To reduce the large candidate space of constraint prediction without predefined assembly faces, we propose a data-driven framework based on assembly feature mate prediction. The framework performs automatic assembly modeling from unassembled B-Rep parts, using assembly features to group the geometric entities of local mating interfaces and restrict candidate formation. Given the lack of suitable assembly feature annotations in existing datasets, we construct a large-scale dataset through an automatic annotation pipeline. Using the annotated dataset, we train an attention-based network to predict assembly feature mates, with Engineering Compatibility Fusion (ECF) incorporating explicit engineering compatibility into learned matching scores. To improve the accuracy of automatic assembly modeling, we use assembly feature patterns (AFPs) to guide the matching process. Finally, a post-processing search selects assembly feature mate and AFP mate candidates, whose associated constraints are generated and solved to complete assembly modeling. Experimental results show that the framework achieves assembly constraint accuracies of 74.79% on the six-assembly comparison set and 64.09% on the extended test set of 16 assemblies, which includes the comparison set. With ground-truth face labels supplied as additional input, the corresponding accuracies increase to 81.78% and 80.93%, respectively.

0.31