CS Paper Radar

From Static Models to Editable CAD: A Design-Intent-Aware Framework for Reverse Parametrization

Yurim Lee, Sumin Lee, Namwoo Kang

cs.CG ·submitted 2026-10-31 09:43 UTC · v1

Abstract

Neutral CAD formats such as STEP typically preserve geometry but not feature histories or parameter dependencies. Thus, they are inherently limited for iterative design that requires modifications, a critical limitation for design optimization that relies on iterative processes. This study presents a design-intent-aware reverse-parametrization framework that converts history-free STEP parts into editable Grasshopper definitions and represents their assembly relations. Without task-specific training, the framework combines kernel-measured features, geometric relations, a compressed attributed adjacency graph, and multiview renderings. An LLM assigns dimensions independent, fixed, or dependent roles, confirms candidate joints, and interprets verification reports. Kernel- and rule-based modules perform measurement, parameter binding, geometry construction, and verification. Evaluation distinguishes default-shape preservation, design-intent reflection, and edit validity, with the latter examined through assembly-level editing examples involving checks for geometry regeneration, joint alignment, interference, and mechanism closure. As an example, five components of a mechanical mechanism were used, and across 25 runs, the mean global and analytic-feature-region intersection over unions (IoUs) were 0.984 and 0.983, respectively; all runs passed the combined shape-preservation criterion. In a separate request experiment, the requested dimension was selected as an independent variable in 19 of 20 runs. Product-level examples show coordinated changes in part geometry and assembly design while preserving assembly relations and avoiding inter-part interference. These results demonstrate editable reconstruction of history-free CAD models under the evaluated geometric and assembly constraints, indicating potential for subsequent design optimization.

Closest papers

Nearest neighbours by meaning across the whole index.

ReliCAD: From Uncertain LLM Generation to Reliable Parametric CAD Modeling

cs.RO ·2026-09-16 ·Peng Zheng, Xintong Dong, Chuanyang Li, Jiaxin Jing, Chuqi Han +3 more
similarity 0.70
Abstract

Large language models have shown considerable potential for natural-language-driven parametric CAD modeling. However, a fundamental contradiction exists between their probabilistic generation and the deterministic requirements of CAD modeling, resulting in limitations in reliability, design-intent preservation, and geometric validity. Existing methods typically rely on large-scale annotated datasets, lack explicit modeling of design intent, and underutilize the deterministic capabilities of CAD kernels. To address these limitations, we propose ReliCAD, a unified framework that transforms uncertain LLM generation into reliable parametric CAD modeling. Through explicit design-intent modeling, ReliCAD converts user requirements into structured design specifications and explicitly models geometric relations, topological dependencies, and feature construction order. It then generates constraint-aware parametric instructions and invokes the CAD kernel through an Agent-ready API to perform geometric construction and constraint solving. ReliCAD further records runtime evidence and employs a verification-feedback mechanism to assess consistency between the generated model and the design specifications, enabling error localization and iterative repair. Experiments on the public HistCAD generation dataset and our multi-granularity CAD editing dataset demonstrate that ReliCAD significantly outperforms baseline methods, achieving 99.8\% validity rate and 0.8753 IoU. ReliCAD provides a verifiable, repairable, and generalizable approach to natural-language-interactive CAD modeling.

0.12

A Design-Intent-Preserving Agent Harness for Parametric CAD Modeling

cs.CV cs.AI ·2026-09-19 ·Xi Cheng, Chenxi Zhai, Jie Xu, Hang Cheng, Mingyu Fan +2 more
dataset similarity 0.70
Abstract

Parametric CAD modeling requires not only matching the target shape, but also preserving design intent under parameter edits. However, most existing methods focus on improving static shape generation accuracy, while the dependencies that govern later edits are often overlooked. To tackle this issue, we present DIP-CAD, a design-intent-preserving agent harness for generating parametric CAD models from images. DIP-CAD combines vision-language model reasoning with CAD kernel operations to establish dependencies that encode the design intent. In parametric CAD, these dependencies are mainly established through geometry references in modeling commands and constraints in parametric sketches. At the command level, ID-based explicit geometry reference binds modeling commands to selected faces, edges, or vertices. At the sketch level, a local-coordinate bridge ensures accurate sketch placement, providing the basis for correctly establishing sketch constraints. Constraints among sketch primitives and constraints to external projected geometry further preserve both internal sketch relationships and dependencies on existing geometry. To provide a more comprehensive data foundation for parametric CAD modeling tasks, we introduce the Geometry Explicit Reference Dataset (GERD), whose structured data format links stepwise modeling commands to intermediate CAD models through explicit geometry references. On GERD-EVL and a DeepCAD test subset, DIP-CAD improves mIoU for static model generation by 11.1% and 5.6%, respectively. In parameter-editing evaluations, the corresponding mIoU improvements are 7.0% and 4.2%. Case studies further demonstrate how parameter edits drive shape updates while preserving design intent.

0.40

Composable CAD: Sketch-to-CAD Program Synthesis in Parts

cs.GR ·2026-10-31 ·Yuanbo Li, Vivian Liu, Sean Liu, Justin Matejka
similarity 0.68
Abstract

Designers often build CAD models part by part, and may iterate on individual components throughout the design process. Recent vision-language models (VLMs) can synthesize CAD programs from sketches, but generating parts independently does not ensure that they are composable: components may lose the intended proportions and alignments or fail to join correctly where they meet. We present Composable CAD, a framework that uses off-the-shelf VLMs to synthesize a design space of independently sampled, interchangeable component programs, where any selection composes into a coherent CAD model. We recover design constraints from the sketch and use them to construct a coarse proxy that establishes how the components are sized, aligned, and attached. We then generate each component independently from its proxy and apply a deterministic rewrite to ensure that neighboring components meet at their prescribed interfaces. We evaluate Composable CAD across a range of objects and sketch styles and conduct two user studies. Compared to VLM-only baselines, our method produces more detailed, composable designs.

0.16

CADEngBench: It Looks Like CAD, but Does It Work? Evaluating Parametric Design, Assembly Reasoning, and Physics Simulation

cs.AI cs.CVcs.LGcs.RO ·2026-08-10 ·Harmanjot Singh, Abhra Dubey, Jorge Alejandro Amador Herrera
benchmarkhighly cited similarity 0.67
Abstract

A CAD model is not engineering-grade merely because it looks correct. It must satisfy design requirements, respond predictably to parameter changes, support controlled edits, match a reference structural response under a declared analysis, and connect to other parts through valid joints. We present CADEngBench, a two-track benchmark for these capabilities. CADEngBench-P evaluates 300 parametric parts, each used for one zero-to-CAD task and one functional-editing task (600 tasks in total), through boundary-representation (B-Rep) validity, engineering and DFM checks, parameter-family perturbations, functional editing, and matched linear-static FEA in CalculiX. CADEngBench-A evaluates 150 body pairs through ranked joint retrieval, exact face-and-edge grounding, joint-frame prediction, and kinematic verification. Across eight multimodal, code-capable models, editing supplied CAD is substantially easier than generating it, while complex edits and matched FEA remain difficult. Assembly predictions often locate the relevant region but fail to recover the recorded joint or mating entities. These results show that CAD evaluation must test engineering behavior rather than appearance alone.

0.42

CIT-CAD: Constraint Intent Tree-based CAD Code Generation and Verification

cs.AI cs.SE ·2026-09-07 ·Yali Du, Hui Sun, San-Zhuo Xi, Ming Li
similarity 0.66
Abstract

Natural-language Computer-Aided Design (CAD) code generation aims to turn design intent into executable and editable parametric programs. Large language models (LLMs) make this goal increasingly practical, but useful systems must preserve the construction process behind the rendered geometry. Existing benchmarks and methods mostly focus on how closely the generated CAD model matches the reference geometry, often using metrics such as Intersection over Union (IoU). Such metrics can miss errors in part decomposition, construction hierarchy, Boolean operations, sketch structure, and geometric relations. This gap calls for a representation that makes design intent explicit and lets a system check generated code against that intent. We propose CIT-CAD, a framework that infers a Constraint Intent Tree (CIT) from the input description to represent the intended entities, hierarchy, operations, and relations. The tree has two roles: it guides CAD code generation and defines expected constraints for verification. The framework extracts actual constraints from the generated program, compares them with the expected constraints, and uses mismatches to localize and repair design violations. Experiments show that the framework improves CAD generation performance, with larger gains on more complex multi-entity designs. By turning design intent into an explicit and checkable object, this work is the first attempt to move text-to-CAD generation beyond rendered-geometry matching toward construction-aware synthesis, verification, and repair.

0.23

LLM-Aided Design for Manufacturing: A Multi-Agent System for Intent-Preserving Redesign of CAD for Improved Manufacturability

cs.CE cs.CVcs.MA ·2026-09-03 ·Kojo Welbeck, Xiangyu Shi, Zahra Sadeghi, Qi Zhu, Ping Guo
benchmark similarity 0.66
Abstract · 21 pages, 8 figures

We introduce autonomous, intent-preserving Design for Manufacturing (DFM) redesign of CAD parts: given an engineer's CAD model, the method returns a variant that is easier to manufacture without losing its design intent. Generating such a redesign in a single shot is unreliable, since CAD fidelity degrades as parts grow complex; we instead produce it as a sequence of individually verified design transitions. Our DFM-Redesign pipeline realizes this with two coupled agent subsystems driven by a pretrained multimodal LLM: a DFM Reviewer that inspects the current design and proposes one intent-preserving manufacturability improvement at a time, and a CAD Modifier that executes each proposal as an edit to the part's CadQuery program. The CAD Modifier closes a verification loop, compiling every candidate edit and visually checking it against the intended change from multi-view renderings, then re-generating or re-instructing until the edit is accepted or abandoned. Iterating review and verified modification compounds edits into parts more complex than one-shot generators reliably produce, preserves the original intent at each step, and requires no fine-tuning. On a 46-part benchmark scored by chamfer distance to reference geometries, the CAD Modifier reproduces target parts more accurately on average than chain-of-thought single agents given the same tools, and ablations isolate the contributions of the visual review loop and of captioning the design state before each edit. A centrifugal pump casing built from 32 chained transitions illustrates the complexity reachable by compounding verified edits. This is a preliminary report: evaluation of the full review-and-redesign loop, including manufacturability gain and an operational measure of intent preservation, is ongoing.

0.18

IndustrialCAD-1400: Benchmarking Detailed Industrial Assemblies from Text

cs.AI ·2026-10-17 ·Hebao Zhu, Kang An, Zhuoke Liao, Faqiang Qian, Ziliang Wang +2 more
benchmark similarity 0.65
Abstract

Industrial assemblies require more than a recognizable shape: functional parts, interfaces, dimensions and service features must satisfy a detailed request together. We introduce IndustrialCAD-1400, a text-to-CAD benchmark for this industrial setting. Its 1,400 requests combine 400 equipment categories across 40 domains with 250 four-case design families. Family requests specify a median of 17 named component or configuration roles and six explicit numeric targets; controlled variants test whether dimensions change while shared structure is retained. Task construction draws on documented manufacturer information, owner specifications and engineering guidance. Models generate geometry programs from requests, and a common Blender environment executes them to produce scenes, optional measurements, and standardized views for evaluation. A request assessment of front, isometric, and top views measures visible component, arrangement, and interface fulfillment without requiring a single reference geometry. Five stratified panels preserve complete families while covering the benchmark exactly once, enabling balanced comparisons and separating industrial breadth from controlled numerical responsiveness. In conclusion, IndustrialCAD-1400 extends text-to-CAD from recognizable part geometry to industrial assembly synthesis under joint component, interface, spatial, and numerical specifications.

0.25

Can It Actually Work? Synthesizing Functional CAD Mechanisms

cs.CV cs.CLcs.GR ·2026-10-19 ·Wenqian Zhang, Yangyi Huang, Zigeng Xu, Weiyang Liu, Zhen Liu
benchmarkcode/data similarity 0.65
Abstract · 45 pages, 16 figures, project page: https://thegenlab.ai/funcad/

While LLM agents can generate visually plausible CAD assemblies, these designs often fail to fulfill their intended physical functions. We study functional CAD design, a setting where agents interpret underspecified requests to construct and iteratively revise mechanisms that satisfy functional requirements in physical simulation. Verifying these requirements is nontrivial: different candidate mechanisms may realize the same function through entirely different components, controls, and operating sequences. To bridge this gap, we propose FunCAD-Harness, a framework that translates abstract requirements into candidate-specific physical tests and uses simulation feedback to guide design revisions. To systematically evaluate this capability, we introduce FunCADBench, a benchmark spanning 46 mechanism families with interdependent and multi-step operations. Experiments across frontier LLM agents show that FunCAD-Harness exposes subtle mechanical failures invisible to visual inspection, substantially improving functional success rates over standard simulation-augmented baselines. Ultimately, our work marks a step toward CAD agents capable of translating human intent into working mechanisms.

0.39