CS Paper Radar

Nonlinear Dynamical Systems as Scalable and Efficient Physical Neural Networks

Tyler King, Magnus Saebo, Jeremie Laydevant, Haoting Zhen, Maxwell G. Anderson, Tatsuhiro Onodera, Peter L. McMahon

cs.LG cond-mat.dis-nncs.ETcs.NE ·submitted 2026-10-15 17:25 UTC · v1

Abstract

The rapid growth in the size of state-of-the-art machine-learning (ML) models has led to increasing compute demands, spurring the development of energy-efficient hardware accelerators. Physical systems trained to perform ML inference, known as physical neural networks, have been proposed as accelerators in part because of their potential to be highly energy efficient. However, the ML inference accuracies reported in most investigations of physical neural networks have been substantially below the state of the art for conventional digital neural networks. In this work, we show in simulation studies that by applying modern ML training practices, including model compression, various candidate physical neural networks based on nonlinear dynamical systems can achieve accuracies as high as 99.2% on MNIST handwritten-digit recognition. We also show for one dynamical system that using it as the core building block of a parameter-efficient ML architecture inspired by MLP-Mixers enables accuracies of up to 86.4% on CIFAR-10 image classification (92.2% with pretraining and knowledge distillation), compared with 64% for the same system without the mixer architecture. The mixer approach achieved its accuracy while using $>5\times$ fewer trainable parameters than the baseline. Finally, we present back-of-the-envelope estimates for inference energy efficiency and speed when using an example physical dynamical system, suggesting that orders of magnitude improvements may be possible over digital-electronic neural networks.

Comment
32 pages, 10 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Optimizing Physical Neural Networks through Device Variable Selection

cs.ET cs.ARcs.CVcs.LG ·2026-10-24 ·Sjoerd van den Belt, Manuel Escudero, Mohamadreza Zolfagharinejad, Wilfred G. van der Wiel, Nikolaos Alachiotis
similarity 0.67
Abstract

Physical neural networks (PNNs) leverage device physics in electronics, optics, and related domains to enable energy-efficient neural networks. Broken-isomorphism PNNs replace linear operations with multivariate physical transformations, modifying how input signals are mapped to device variables. We exploit network architectures emerging from these mappings by treating the routing between signals and input variables of physical devices as trainable parameters. This approach expands device-level tunability of the physical transformations while, at the system level, demonstrating improved expressivity of PNNs with negligible additional inference overhead. This discrete routing is optimized by training a categorical distribution using Gumbel-Softmax reparametrization. We evaluate this approach using experimentally calibrated differentiable models of multivariate electronic RNPUs for MNIST and CIFAR-10 classification. Using variable selection, we improve the MNIST classification accuracy for a small CNN model from 94.5% to 96.9% and the accuracy of CIFAR-10 from 62.8% to 68.0%. Our method uniquely leverages the induced biases of broken-isomorphism PNN architectures, paving the way towards more efficient physics-based neural network inference.

0.16

PotentialEP: Backprop-Free Training of CIFAR-Scale Generative Models via Equilibrium Propagation

cs.LG cs.ETcs.NE ·2026-10-10 ·Alex Gower
theorycode/data similarity 0.62
Abstract · Code: github.com/alexgower/PotentialEP

Generating an image with a diffusion or flow-matching model typically involves integrating a velocity field for hundreds of sequential steps. That computation suits a GPU poorly and an analog neuromorphic substrate well, where one fast, low-power physical relaxation could replace the whole sequence. Two things are needed: a generative algorithm whose computation is a relaxation, and a way to train it without backpropagation, whose global gradient transport is hard to realise in analog. Energy Matching supplies the first, sampling by gradient-descent relaxation on a time-independent potential - but obtaining the gradient that descent follows is itself a backward pass, once per integration step. We prove that a predictive coding network with a single linear injection term added to its energy relaxes to a state whose visible layer carries that gradient inherently, with an error that vanishes for small injection strengths. An Energy Matching model trained by backpropagation can therefore be loaded into this network unchanged and sampled by relaxation alone, matching the original model's FID to within 0.04 at CIFAR-10 and ImageNet-32 scale. The network can also be trained without backpropagation: Equilibrium Propagation reproduces backpropagation's parameter updates to a cosine similarity of 0.9998, and training end to end with those updates reaches an FID of 3.64 on unconditional CIFAR-10 against 3.54 for backpropagation. To our knowledge this is the first CIFAR-10 generative model trained with Equilibrium Propagation, and the first at competitive quality by any backpropagation-free rule. This quality does not require group normalisation or attention: an architecture of only convolutions and pointwise nonlinearities, both native to an analog crossbar, reaches an FID of 3.51 when trained by backpropagation.

0.43

BeFit: Shifting Complexity from Weights to Bernstein Activations for Resource-Constrained Sensing

cs.AI cs.AR ·2026-11-17 ·Malak Gamal El-Din, Yasser Shoukry, Salma Elmalaki
similarity 0.62
Abstract

Time-series sensing increasingly relies on neural networks, yet deployment on resource-constrained microcontrollers remains challenging. Aggressive model compression can reduce accuracy, while restricting weights to multiplication-free representations introduces further losses. We present BeFit, an end-to-end framework that shifts model capacity from weights to learnable Bernstein polynomial activations. BeFit (i) finds compact Bernstein-activated convolutional neural networks (BeCNNs) through hardware-aware neural architecture search and trains them via knowledge distillation; (ii) projects their weights to multiplication-free codes, freezes the codes, and recovers the resulting accuracy loss through the learnable activations; and (iii) generates model-specific kernels that exploit the projected weights for multiplication-free convolutions. On human activity recognition, BeCNNs are 2.75 percentage points (pp) more accurate on average than ReLU CNNs of identical architecture. On a TI CC3220SF (Cortex-M4), weight projection speeds BeCNNs up by 2.2x on average while losing 0.8 pp, compared with 2.4 pp for ReLU CNNs. Against the MLPerf Tiny DS-CNN reference model running on TensorFlow Lite Micro with CMSIS-NN, the unprojected BeCNN achieves 1.0 pp higher accuracy, 2.2x lower latency, and 6.4x lower flash, while the projected model remains within 1.0 pp of the reference accuracy and runs 5.9x faster. In emulation on a RISC-V core without a hardware multiplier, the instruction-count reduction relative to the DS-CNN increases from 5.2x on the Cortex-M4 to 147x. BeFit also extends to transformers and MLPs, and across all tasks the final models stay within 1.56 pp of their float32 teachers on average.

0.30

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.61
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

Benchmarking Model Compression Techniques Across Heterogeneous Edge Platforms: A Predictive Maintenance Use Case for Rotating Machinery

cs.LG cs.PF ·2026-10-21 ·Matheus Calheira Guimarães de Oliveira, Marco Aurélio da Silva Cruz, Regis Cardoso, Lucas Cambuim, Rafael Macieira +7 more
similarity 0.60
Abstract

To enable Industry 5.0, where autonomous systems are widely adopted and integrated with people to promote sustainable development in industries, it is imperative to adapt complex deep learning models to operate efficiently on resource-constrained hardware for edge inference. However, adapting these models remains challenging due to the hardware heterogeneity of edge computing in industrial settings, performance degradation caused by model compression, and the lack of clear guidance on which compression techniques are practical and effective for applications such as predictive maintenance. To address these challenges, this paper presents a comprehensive comparative analysis of four state-of-the-art model compression techniques applied to a high-performance convolutional neural network for predictive maintenance using a real-world dataset of rotating machinery, equipment typically used in industry. The compressed models were evaluated across a heterogeneous set of nine computing platforms, ranging from highly constrained edge computing devices to general purpose and high-performance processors, reflecting the diversity and fragmentation typical of industrial edge environments. By jointly prioritizing classification performance, inference speed, and compression ratio, we found that compression using knowledge distillation emerged as the most effective approach. The model had more than 90% speedup across all devices while maintaining a 91.22% balanced F-score, with a very small drop in predictive performance relative to the uncompressed model, along with a 98.9% size reduction. Through successful deployment across multiple edge platforms and a systematic comparison of compression strategies, we demonstrated a clear path to achieving Industry 5.0 targets, drastically cutting computational costs and, consequently, energy consumption without sacrificing predictive performance.

0.13

Cross-platform frequency-domain physical neural networks with identical models and parameters

eess.SP physics.opticsphysics.app-ph ·2026-10-01 ·Zichen Xi, Jun Ji, Liyang Jin, Hsuan-Hao Lu, Wenjie Xiong +1 more
similarity 0.60
Abstract

Frequency-domain physical neural networks (PNNs) have emerged as a promising analog computing paradigm, achieving a reduced number of devices, enhanced robustness, and high inference accuracy. However, existing demonstrations across various physical domains, such as optics, acoustics, and electronics, are mostly specific to the target devices or platforms, usually requiring hardware-dependent models and post-fabrication parameter tuning. Here, we demonstrate cross-platform implementations of frequency-domain PNN across different wave-based computing platforms using identical, pre-trained parameters. By exploiting shared second-order nonlinear processes, the PNN model is implemented on optical, microwave, and acoustic-wave platforms without the need of fine tuning the parameters. Evaluated on a unified four-class classification task, the frequency-domain PNN achieves high inference accuracies of 97.6% in optics, 98.4% in electronics, and 98.2% in mechanics. Further, we systematically compare related performance metrics across these three distinct physical domains, paving the way to a universal neural network across different physical platforms.

0.24

Elastoformer: Enabling Dynamic Adaptivity via Elastic Model Transformation

cs.CV cs.AIcs.PFeess.SY ·2026-09-09 ·Sudaksh Kalra, Dolly Sapra
publishedcode/data similarity 0.60
Abstract · Published at SEC'25

EdgeAI systems are increasingly employing computer vision applications to enable intelligent, on-device decision-making in real-time. However, these deployments face highly dynamic operational conditions, with fluctuating constraints on latency, power availability, and memory resources. Deep Neural Networks (DNN), which follow fixed computational execution flows, lack the flexibility to adapt to such variability, resulting in inefficient and suboptimal performance in edge scenarios. This underscores the need for architectures that are not only efficient but also dynamically scalable at runtime. In this paper, we propose Elastoformer: A framework that transforms conventional neural networks (NN) into Elastic NN capable of real-time elastic inference. Unlike the conventional bag-of-models approach, which requires maintaining multiple independent models for different operating conditions, Elastoformer offers a single, modular solution that dynamically switches between multiple modes of operation at runtime, adapting efficiently to the changing computational budgets of edge devices without the overhead of managing separate models. Experiments reveal that our framework achieves up to 85% reduction in computation FLOPs, 50% reduction in latency and 76% reduction in memory overhead, while showcasing the architecture agnostic nature of the framework across both Vision Transformers and CNNs. Our code is available at https://github.com/sudaksh14/Elastoformer.

0.71

Beyond Noise: Understanding and Overcoming Temperature Effects in Analog DNN Inference

cs.LG ·2026-09-14 ·Niklas Summ, Xiao Wang, Hendrik Borras, Bernhard Klein, Holger Fröning
published similarity 0.60
Abstract · Published at the ECML PKDD Conference 2026, at the 7th Workshop on IoT, Edge, and Mobile for Embedded Machine Learning

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

0.42