CS Paper Radar

Channel Estimation for Stacked Intelligent Metasurfaces with Mutual Coupling

Chandan Kumar Sheemar, Giovanni Iacovelli, Symeon Chatzinotas

eess.SP ·submitted 2026-10-31 17:00 UTC · v1

Abstract

Channel estimation for stacked intelligent metasurfaces (SIMs) has relied on the cascade model, which ignores mutual coupling and inter-layer reflection. Under a coupling-consistent multiport model, we show that the pilots are linear in the unknown channel segments and derive least-squares and linear minimum-mean-square-error estimators, an identifiability condition and an exact error decomposition for the reactance training schedule, and a gradient-based schedule design. Cascade-based estimation floors above $0$~dB normalized error at practical layer spacings and collapses the sum rate below that of the bare feed, whereas the proposed estimators retain about $80\%$ of the perfect-channel-knowledge sum rate.

Closest papers

Nearest neighbours by meaning across the whole index.

Multiuser Channel Estimation in FIM Systems: A Structured Block Term Decomposition Approach

eess.SP ·2026-10-21 ·Xi Han, Junqiao Chen, André L. F. de Almeida, George C. Alexandropoulos
similarity 0.63
Abstract

Flexible intelligent metasurfaces (FIMs) create geometry-dependent array responses that provide spatial diversity but complicate multiuser channel estimation. This paper studies uplink estimation using pilot observations collected under multiple prescribed and calibrated morphing configurations. Each user contributes a matrix--vector block that couples its diagonal reference-array response with its morphing-dependent phases, while its third-mode vector is the known pilot scaled by the complex channel gain. We develop a pilot-constrained structured block term decomposition (BTD) estimator whose alternating least-squares updates exploit both the known pilot directions and the diagonal spatial factors. The undeformed configuration sets the columnwise scaling convention, and a unit first-entry normalization assigns the remaining block scale to the channel gain. Matching the recovered factors to the calibrated spatial--morphing manifold then yields the physical angles and configuration-dependent channels. We characterize the rank conditions for unique conditional least-squares updates, distinguish these conditions from global factor and physical-angle identifiability, and summarize the training, coherence-time, and computational requirements. Simulations show accurate two-dimensional angle and channel recovery in the tested settings, equal total pilot-symbol overhead in rigid-panel comparisons, improved steering-vector estimates as morphing diversity increases, and degradation as user loading or pilot correlation increases.

0.22

An Efficient SIM Beamforming Scheme Based on Physical-Empowered Projected Gradient

eess.SP ·2026-10-29 ·Yuzhi Yang, Hao Liu, Tianhao Guo, Jiancheng An, Lu Gan +2 more
similarity 0.62
Abstract · under review by ieee trans

Stacked Intelligent Metasurfaces (SIMs) have emerged as a promising technology for next-generation wireless systems. Especially in multi-input multi-output (MIMO) systems, it has the potential to realize complicated wave-domain transformations with low hardware costs and energy consumption. However, SIM-assisted MIMO systems face two major challenges in channel estimation and beamforming. As the SIM elements do not have the signal processing capability, channel estimation can only be conducted in an indirect manner, which makes it challenging. Moreover, the precoding optimization after channel estimation is non-convex and also difficult. Targeting these issues, we exploit the time-division duplex (TDD) channel reciprocity to calculate the gradient backpropagation in an over-the-air manner. Based on this structure, we propose a gradient-based optimization framework that optimizes beamforming without explicitly estimating the SIM--UE channel. The proposed method, namely the physical projected gradient descent (P2GD) method, optimizes the achievable sum rate while incorporating zero-forcing (ZF) constraints. Based on the method of incorporating the ZF restriction, we propose two variations of P2GD, namely user equipment (UE)-P2GD and base station (BS)-P2GD. We also provide a theoretical convergence analysis and projected gradient techniques to ensure physical feasibility. Simulation results show that the proposed approach can achieve suboptimal beamforming in the multi-user system within a small number of over-the-air iterations, using a per-direction signaling budget below the pilot cost of explicit SIM--UE channel estimation. The proposed method provides a low-overhead beamforming scheme for SIM systems without explicit SIM--UE channel estimation.

0.48

Structured PARAFAC Channel Estimation for Flexible Intelligent Metasurface Receivers

eess.SP ·2026-10-20 ·Xi Han, Junqiao Chen, Yuansheng Zhang, André L. F. de Almeida, George C. Alexandropoulos
similarity 0.57
Abstract

Flexible intelligent metasurfaces (FIMs) create geometric diversity through aperture morphing, but their configuration-dependent responses complicate uplink channel estimation. This letter considers multiple users sharing a common angular response and develops a structured PARAFAC model across calibrated FIM configurations. Its known identity factor and rank-one pilot-weighted channel factor enable deterministic, noniterative algebraic factor recovery through per-element rank-one approximations, reference-state normalization, global rank-one projection, and a least-squares morphing-factor update. The recovered spatial and morphing factors are then jointly matched to the calibrated manifold to estimate the common angles, user gains, and configuration-dependent channels. Simulations demonstrate accurate recovery and show that out-of-plane morphing resolves the azimuth-sign ambiguity of an undeformed planar aperture; an angular-spread experiment quantifies the mismatch when the common-response assumption is relaxed.

0.32

Stacked Intelligent Metasurface-Based MultiModal Feature Fusion for Collaborative Inference in Edge Networks

cs.DC ·2026-10-09 ·Yushi Wang, Zhengxin Yu, Guhan Zheng, Haris Pervaiz, Zheyi Chen +1 more
similarity 0.57
Abstract

In navigating the challenges of computational and communication overhead within the 6G-era Collaborative Inference (CI), this paper explores the feasibility of employing Stacked Intelligent Metasurface (SIM) to perform CI, termed SIM-CI. The SIM functions as a physical computing unit, receiving multi-user Over-The-Air (OTA) aggregated features within the same spectrum. It thus executes the necessary spatial-frequency combining and inference in a single physical wave propagation.SIM-CI also incorporates a tri-heterogeneity robustness adapter to address the network heterogeneity, such as multi-modal data and user inference models, as well as a quality-aware contrastive approach that align features from different modalities and extraction levels into a unified feature space. Considering the heterogeneous and dynamic channels, we further integrate Channel State Information (CSI) as an additional input into the adapter design, enabling users' early perception of potential channel states. Moreover, to maximally mitigate the impact of channel variations, we design a new hybrid beamforming network that combines the robustness of model-driven pre-equalization with the adaptability of data-driven learning. Experimental results demonstrate the effectiveness of our SIM-CI compared to digital-domain inference, achieving 98.6\% accuracy to conversional digital-domain CI approaches under various heterogeneous conditions, while reducing computational energy by 25\% and requiring 75\% fewer transmission time slots.

0.19

To Stack or Not to Stack? Jacobian Conditioning and the Benefits of Depth in Metasurface-Based Linear Transformation Synthesis

eess.SP ·2026-10-14 ·Andrea Abrardo, Andrea Garulli
similarity 0.57
Abstract · 12 pages, 8 figures, journal paper

This paper investigates when and why stacking programmable metasurfaces into Stacked Intelligent Metasurfaces (SIMs) improves linear transformation synthesis at a fixed phase-control budget. The analysis shows that algebraic Jacobian rank alone is insufficient to characterize practical synthesis, which also depends on the strength and balance of the sensitivity directions generated by the available controls. A layer-resolved analysis of the cascade model explains how inter-layer propagation can generate complementary sensitivity directions. The relevance of this mechanism is then assessed using an S-parameter multiport model that includes electromagnetic coupling and multiple scattering. Numerical results in near- and far-field sensing scenarios show that distributing the same control resources across multiple layers can strengthen weak transformation directions, improve Jacobian conditioning, and substantially enhance synthesis accuracy. These findings explain why increasing depth can offer benefits that are not obtained by simply enlarging a single programmable surface, and identify layer complementarity and Jacobian conditioning as useful criteria for SIM architecture design.

0.19

Goal-Oriented Wave Computing for Direction-of-Arrival Estimation

eess.SP physics.app-ph ·2026-10-05 ·Mert Kalfa
benchmark similarity 0.56
Abstract · 9 pages, 2 figures, 4 tables

Programmable metasurfaces---arrays of elements whose electromagnetic response can be tuned electronically---can process signals as a wave propagates through or reflects off them, a paradigm known as wave-domain analog computing. The design strategy is typically indirect: the surface is fitted to a prescribed linear operator, such as a discrete Fourier transform, and the result is read from output power measurements. Using direction-of-arrival (DoA) estimation as a canonical benchmark, we study what this indirection costs across analog computing topologies, namely reflective reconfigurable intelligent surfaces (RIS), beyond-diagonal RIS (BD-RIS), and stacked intelligent metasurfaces (SIM). We first derive Cramér--Rao bounds for the complete physical estimation chain, including one that accounts for output detectors measuring only intensity. We then formulate a goal-oriented alternative where the surfaces are trained directly through the deployed readout, with no operator target. We observe that goal-oriented training lets sparsely connected or shallower surfaces reach the task performance of their more complex operator-fitted counterparts---despite nearly identical Fisher information---and that the advantage persists under coarsely quantized (1--3 bit) control. From 16 to 64 elements, the depth saving persists, while the connectivity a beyond-diagonal RIS needs grows with the aperture. Under tuner and per-layer loss, the goal-oriented designs keep their advantage.

0.25

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.55
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Training-Efficient Channel Estimation for the Multiuser Uplink Relying on Generalized Flexible Intelligent Metasurfaces

eess.SP ·2026-10-21 ·Daniel C. Araújo, André L. F. de Almeida, Lajos Hanzo
similarity 0.55
Abstract

We consider uplink multiuser channel estimation for a generalized flexible intelligent metasurface at the base station, under narrowband far-field propagation and a twin-time-scale mechanical protocol: on the slow time-scale the panel translates rigidly over a planar grid, while on the fast time-scale the surface morphs along its normal direction. From orthogonal multiuser pilots, we show that each user's channel admits a fourth-order canonical polyadic tensor structure. We develop two complementary estimators: alternating least squares factorization followed by paired rotational-invariance wavevector extraction, and a tensor spatial-smoothing multiple signal classification estimator that preserves the multilinear array manifold. Both share a minimum description length front-end for automatic tensor-rank detection. We derive Kruskal identifiability conditions that relate the numbers of elements, morphing states and grid positions to the maximum number of recoverable multipath components, and show that the tensor model reconstructs the channel at panel configurations beyond the training grid. This prediction capability drives a configuration-selective multiuser transmit precoder that searches the entire motion grid without additional pilot overhead. Numerical results confirm the identifiability limits and show that, once the model order is resolved, the configuration search makes the same choice from estimated as from perfect channel state information. The reconfiguration gain over a fixed panel of identical aperture and training budget grows with the user load, and fast morphing proves valuable for conditioning the tensor factorization rather than as a source of beamforming gain.

0.27