CS Paper Radar

Structured PARAFAC Channel Estimation for Flexible Intelligent Metasurface Receivers

Xi Han, Junqiao Chen, Yuansheng Zhang, André L. F. de Almeida, George C. Alexandropoulos

eess.SP ·submitted 2026-10-20 00:48 UTC · v1

Abstract

Flexible intelligent metasurfaces (FIMs) create geometric diversity through aperture morphing, but their configuration-dependent responses complicate uplink channel estimation. This letter considers multiple users sharing a common angular response and develops a structured PARAFAC model across calibrated FIM configurations. Its known identity factor and rank-one pilot-weighted channel factor enable deterministic, noniterative algebraic factor recovery through per-element rank-one approximations, reference-state normalization, global rank-one projection, and a least-squares morphing-factor update. The recovered spatial and morphing factors are then jointly matched to the calibrated manifold to estimate the common angles, user gains, and configuration-dependent channels. Simulations demonstrate accurate recovery and show that out-of-plane morphing resolves the azimuth-sign ambiguity of an undeformed planar aperture; an angular-spread experiment quantifies the mismatch when the common-response assumption is relaxed.

Closest papers

Nearest neighbours by meaning across the whole index.

Multiuser Channel Estimation in FIM Systems: A Structured Block Term Decomposition Approach

eess.SP ·2026-10-21 ·Xi Han, Junqiao Chen, André L. F. de Almeida, George C. Alexandropoulos
similarity 0.74
Abstract

Flexible intelligent metasurfaces (FIMs) create geometry-dependent array responses that provide spatial diversity but complicate multiuser channel estimation. This paper studies uplink estimation using pilot observations collected under multiple prescribed and calibrated morphing configurations. Each user contributes a matrix--vector block that couples its diagonal reference-array response with its morphing-dependent phases, while its third-mode vector is the known pilot scaled by the complex channel gain. We develop a pilot-constrained structured block term decomposition (BTD) estimator whose alternating least-squares updates exploit both the known pilot directions and the diagonal spatial factors. The undeformed configuration sets the columnwise scaling convention, and a unit first-entry normalization assigns the remaining block scale to the channel gain. Matching the recovered factors to the calibrated spatial--morphing manifold then yields the physical angles and configuration-dependent channels. We characterize the rank conditions for unique conditional least-squares updates, distinguish these conditions from global factor and physical-angle identifiability, and summarize the training, coherence-time, and computational requirements. Simulations show accurate two-dimensional angle and channel recovery in the tested settings, equal total pilot-symbol overhead in rigid-panel comparisons, improved steering-vector estimates as morphing diversity increases, and degradation as user loading or pilot correlation increases.

0.22

Training-Efficient Channel Estimation for the Multiuser Uplink Relying on Generalized Flexible Intelligent Metasurfaces

eess.SP ·2026-10-21 ·Daniel C. Araújo, André L. F. de Almeida, Lajos Hanzo
similarity 0.62
Abstract

We consider uplink multiuser channel estimation for a generalized flexible intelligent metasurface at the base station, under narrowband far-field propagation and a twin-time-scale mechanical protocol: on the slow time-scale the panel translates rigidly over a planar grid, while on the fast time-scale the surface morphs along its normal direction. From orthogonal multiuser pilots, we show that each user's channel admits a fourth-order canonical polyadic tensor structure. We develop two complementary estimators: alternating least squares factorization followed by paired rotational-invariance wavevector extraction, and a tensor spatial-smoothing multiple signal classification estimator that preserves the multilinear array manifold. Both share a minimum description length front-end for automatic tensor-rank detection. We derive Kruskal identifiability conditions that relate the numbers of elements, morphing states and grid positions to the maximum number of recoverable multipath components, and show that the tensor model reconstructs the channel at panel configurations beyond the training grid. This prediction capability drives a configuration-selective multiuser transmit precoder that searches the entire motion grid without additional pilot overhead. Numerical results confirm the identifiability limits and show that, once the model order is resolved, the configuration search makes the same choice from estimated as from perfect channel state information. The reconfiguration gain over a fixed panel of identical aperture and training budget grows with the user load, and fast morphing proves valuable for conditioning the tensor factorization rather than as a source of beamforming gain.

0.27

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.61
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Structured Channel Parameter Estimation for RIS-Assisted MIMO Systems via Kronecker and Tensor Factorizations

eess.SP ·2026-09-17 ·Melryllin G. O. Sousa, Jean C. S. Ferreira, Fazal-E Asim
publishedbenchmark similarity 0.59
Abstract

This paper proposes structured channel-parameter estimators for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) systems employing uniform rectangular arrays under line-of-sight propagation. By exploiting the Kronecker and multilinear structures of the cascaded channel, we introduce the Successive Kronecker Factorization (SKF) alongside two Third-Order Tensor Parameter Estimation (TOPE) methods: TOPE-ALS and TOPE-HOSVD. These estimators recover spatial signatures from the pilot-filtered signal matrix, and then decouple the corresponding horizontal and vertical spatial frequencies. This structured formulation achieves benchmark estimation accuracy while reducing computational complexity, offering a efficient solution for RIS-aided systems.

0.25

Simultaneous Direct and Indirect Channel Estimation for RIS-Assisted MIMO Communications

eess.SP ·2026-10-08 ·Daniel V. C. de Oliveira, Daniel C. Alcantara, Fazal. E Asim, Andre L. F. de Almeida, Gabor Fodor
publishedtheory similarity 0.59
Abstract

This paper introduces an enhanced channel estimation method for reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output (MIMO) communications. Considering the presence of both the direct link from the base station (BS) to the user equipment (UE) and the indirect link \textit{via} the RIS, we formulate a tensor-based receiver for joint direct and indirect channel estimation called the TenDICE algorithm. The proposed receiver relies on an extended parallel factor analysis (PARAFAC) tensor model for the received pilot signals, from which the involved (direct and indirect link) channels are estimated using a simple alternating least squares scheme. The proposed TenDICE method is compared with the state-of-the-art least squares (LS) method, Khatri-Rao factorization (KRF) method, enhanced trilinear alternating least squares (E-TALS), and the theoretical Cramér-Rao lower bound (CRLB) based on normalized mean square error (NMSE) and spectral efficiency (SE). The proposed TenDICE outperforms the LS and E-TALS methods and performs similarly to the KRF methods while estimating the direct channel.

0.38

Channel Estimation for Stacked Intelligent Metasurfaces with Mutual Coupling

eess.SP ·2026-10-31 ·Chandan Kumar Sheemar, Giovanni Iacovelli, Symeon Chatzinotas
similarity 0.57
Abstract

Channel estimation for stacked intelligent metasurfaces (SIMs) has relied on the cascade model, which ignores mutual coupling and inter-layer reflection. Under a coupling-consistent multiport model, we show that the pilots are linear in the unknown channel segments and derive least-squares and linear minimum-mean-square-error estimators, an identifiability condition and an exact error decomposition for the reactance training schedule, and a gradient-based schedule design. Cascade-based estimation floors above $0$~dB normalized error at practical layer spacings and collapses the sum rate below that of the bare feed, whereas the proposed estimators retain about $80\%$ of the perfect-channel-knowledge sum rate.

0.28

Intelligent Reflecting Surface for ISAC: From Beamforming to Joint Design With Surface Orientation

eess.SP ·2026-11-07 ·Qiaoyan Peng, Qingqing Wu, Guangji Chen, Yong Zeng, Sai Huang +3 more
similarity 0.57
Abstract

Rotatable semi-passive intelligent reflecting surfaces (SIRSs) provide an additional spatial degree of freedom (DoF) by proactively adjusting the orientation, while dedicated sensors directly receive target echoes. To exploit this DoF for integrated sensing and communication (ISAC), we investigate the joint optimization of SIRS rotation, base station (BS) transmit beamforming, and SIRS phase-shifts to minimize the Cramér-Rao bound (CRB) for target's spatial-frequency estimation subject to per-user communication signal-to-interference-plus-noise ratio (SINR) constraints. We first establish an orientation-dependent system model that characterizes the effective aperture gains, based on which the CRB is derived. To gain useful insights, closed-form expressions of the beamforming and rotation designs are derived in the sensing-only and communication-only cases. For the co-located user and target case, we further characterize the condition under which the sensing-oriented rotation design also satisfies the communication requirement. In the single-user single-target case with ideal unit aperture gains, we analyze the channel correlation and its impact on ISAC performance. For the general multi-user case, an effective method based on the genetic algorithm is developed. Numerical results demonstrate the superiorities of the rotatable SIRS over the fixed-orientation SIRS and show that jointly optimizing the SIRS orientation and beamforming can improve the effective aperture gains and the correlation between communication and sensing channels.

0.24

Low-Complexity Channel Parameter Estimation for Coprime HRIS-Assisted MIMO Systems

eess.SP ·2026-08-13 ·Jean C. S. Ferreira, Melryllin G. O. Sousa, Fazal-E Asim
published similarity 0.56
Abstract

This paper proposes a parameter estimation scheme for uplink MIMO systems assisted by a Hybrid Reconfigurable Intelligent Surface (HRIS). To reduce hardware complexity, the HRIS employs a small number of active elements arranged in a sparse coprime geometry for local sensing, while the remaining elements passively reflect signals. This simultaneous sensing and reflection significantly improves accuracy over fully passive architectures. The method leverages Khatri-Rao and Kronecker factorizations to efficiently decouple the cascaded channel at the base station. Furthermore, spatial smoothing resolves the coprime array rank deficiency, enabling robust angular extraction via Root-MUSIC. Simulations demonstrate highly resilient estimation performance across scenarios.

0.22