CS Paper Radar

Programmable Droplets as Active Matter in a Reconfigurable Environment

Ivan Shmarov, Abhishek Sharma, Michael Jirasek, Kristine Laws, Leroy Cronin

cs.RO cond-mat.mtrl-sci ·submitted 2026-10-31 21:23 UTC · v1

Abstract

Exploring systems that bridge the gap between non living and living matter requires a reconfigurable environment coupled to synthetic systems capable of autonomous motion, adaptive behaviour and persistent dynamics. Self propelled droplets provide a minimal platform for such life like behaviour, but quantitative measures capturing both persistence and adaptability to enable closed loop reconfiguration remain lacking. Here we introduce an autonomous closed loop robotic platform to characterise and dynamically program the autonomous behaviour of multicomponent oil in water droplets. We explored two chemical composition spaces, with and without external pH perturbations, analysing droplet behaviour in real time and iteratively selecting formulations. To quantify this behaviour, we introduce two descriptors, persistence and diversity. Persistence is quantified by mapping temporal dynamics in a speed shape complexity space, where we identify a persistence domain that distinguishes active from inactive droplets. Diversity captures spontaneous or environmentally induced variation in motion and the propensity of droplets to reorient or adapt under perturbation. We show that persistence and diversity are constrained by a behavioural trade off: high persistence limits diversity, whereas high diversity reduces persistent activity. Our results provide a quantitative framework for navigating and programming life like behaviours in active droplets and show how closed-loop experimentation can uncover organising principles in complex active matter.

Comment
28 pages, 8 figures, 26 references

Closest papers

Nearest neighbours by meaning across the whole index.

Autonomous Droplet Navigation via Model-Based Reinforcement Learning: Zero-Shot Transfer and Emergent Dynamics

cs.RO cs.LGeess.SY ·2026-10-03 ·Rajneesh Anand, Mayuresh V. Kothare
published similarity 0.63
Abstract · Accepted for presentation at the Robotics & Automation in Self-Driving Laboratories 2026 Workshop, IROS 2026. https://sites.tufts.edu/selfdr…

Self-driving laboratories (SDLs) are transforming chemical and materials discovery through closed-loop automation, yet automated infrastructure for physical manipulation of soft, deformable matter remains beyond current robotic platforms. A critical instance is autonomous droplet transport on an open surface, where contact-angle hysteresis, capillary pinning, and surface heterogeneity produce partially observable dynamics that pose significant challenges for classical model-based controllers. We introduce the first robotic platform for closed-loop autonomous liquid droplet navigation on an open, unconfined surface using model-based reinforcement learning. A two-axis tilting board coated with a thin silicone oil film drives the droplet, while an overhead camera provides real-time feedback. A learned policy was trained on just 50 to 150 physical episodes depending on geometric complexity, without simulation or analytical models. Beyond performance alone, the platform demonstrates three capabilities of interest to the SDL community: it robustly transfers zero-shot to unseen geometries; it autonomously discovers an oscillatory depinning strategy to free the droplet when it sticks; and it completes its full training pipeline in under 90 minutes. These results extend reinforcement-learning manipulation from rigid microrobots to deformable soft-matter systems for next-generation SDLs.

0.21

Autonomous Droplet Navigation via Model-Based Reinforcement Learning

cs.LG cs.ROeess.SYphysics.flu-dyn ·2026-09-14 ·Rajneesh Anand, Mayuresh V. Kothare
code/datahot direction similarity 0.61
Abstract · 43 pages, 15 figures, 3 tables including supplementary material. The source code is available via GitHub at https://github.com/rajneeshanand…

Precise manipulation of liquid droplets underpins lab-on-a-chip platforms for diagnostics, chemical synthesis, and biological assays. Yet autonomous droplet transport through confined geometries of varying complexity remains an open challenge. Droplets exhibit contact-angle hysteresis, deformability, and capillary pinning, which make their response to actuation nonlinear and history dependent, that classical controllers and pre-programmed trajectories cannot cope in multi-turn environments. Here we demonstrate autonomous navigation of a liquid droplet through geometries of increasing complexity on a gravity driven (Labyrinth) platform using model-based reinforcement learning. A thin silicone oil film reduces contact-line pinning while two-axis tilt supplies the gravitational driving force, and an overhead camera tracks the droplet in real time. An offline-trained policy discovers effective tilt strategies from limited physical interaction data, without simulation or analytical droplet models. The system operates under partial observability, as oil-film thickness, instantaneous contact angle, and droplet deformation state remain hidden from the controller. Despite these challenges, the learned policy achieves reliable navigation across straight, right-angle, and curved-arc paths, including outside-corner geometries. We further demonstrate that a policy trained on a simpler geometry transfers to complex ones, succeeding zero-shot on right-angle and staircase paths and reaching full success on a curved arc with a fifth of the training data. The findings suggest promising avenues for enabling droplet based microfluidic systems to serve as intelligent chemical laboratories.

0.72

Robotic Multiphase Interaction: Manipulating Coupled Liquid and Solid Dynamics with a World Model

cs.RO ·2026-09-18 ·Yixuan Feng, Peng Wang
similarity 0.57
Abstract · 11 pages, 6 figures, 6 tables

This work presents \textit{Robotic Multiphase Interaction (RMI)}, a setting in which liquid enters a porous material and interacts mechanically with its deforming solid skeleton. Manipulation can therefore change pore volume, expel or redistribute retained liquid, and alter grasp stability at the same time. Spilled liquid can also create safety risks in domestic and manufacturing settings. This differs from most manipulation of solid objects and from tasks that involve both liquid and solid while keeping the phases spatially separate. We study a sponge filled with water as the first RMI example. We use implicit incompressible porous flow with smoothed particle hydrodynamics as the dynamics engine and enable robotic manipulation by adding Coulomb contact memory, hybrid velocity and force regulation, and a stability gate for lifting. The resulting environment connects robot commands to changes in the coupled liquid and solid state. A world model conditioned on actions predicts how this state evolves under candidate commands, while a temporal UNet generates actions using either Diffusion Policy or rectified flow matching. Our world model reduces retained water prediction error by more than $60\%$ compared with the baseline. The best action sequence selected by the world model from policy proposals further reduces the predicted terminal water error by about half. These improvements show that modelling the coupled liquid and solid state helps the robot predict how its actions affect both the porous object and the liquid held inside.

0.31

FASTFUNNELS: Agile Multi Robot Navigation in Narrow Spaces via Adaptive Dynamic Funnels

cs.RO ·2026-11-06 ·Vignesh Rajagopal, Rohan Chandra
similarity 0.53
Abstract · 8 pages, 4 figures, 1 table

We focus on the problem of high-speed multi-robot navigation in cluttered spaces with tight spatial constraints. A key challenge is balancing safety with agility, as existing methods often trade one for the other (slowing down near a bottleneck to avoid collisions versus failing to swerve in time at high speeds), especially for car-like systems. Our approach belongs to the family of formation control methods, in which Ackermann-steering agents coordinate while navigating tight spaces. However, current formation control techniques rely on rigid, pre-defined shapes and transitions that depend on initial conditions, the environment, and vehicle dynamics, and are impractical to maintain at high speeds. For example, agents passing through a small gap must first form a square, transform into a line using analytical equations, and then return to a square. In contrast, our approach is inspired by a droplet of water that continuously adapts its shape to the space it flows through without slowing down. We propose a hierarchical algorithm in which, at the high level, a reinforcement learning policy produces a dynamic, blob-like elliptical patch that morphs its shape in real time, squeezing, stretching, and orienting itself around obstacles and through tight spaces. At the low level, the robots are controlled via distributed model predictive control (DMPC) to stay inside the patch, which acts as a soft forcing function, while avoiding collisions with each other. We evaluate our approach, FastFunnels, on simulated F1TENTH racing cars across 14 scenarios with N=1 to N=6 robots, averaged over 20 trials each. FastFunnels achieves an 89% completion rate at 7.73 m/s, while all baselines either fail to complete the track or succeed only at very low speeds (0.07-1.79 m/s, about 40% completion rate).

0.21

Autonomous thermodynamic cycles via robotic mobility and sensing

cs.CE cond-mat.softcs.ROeess.SY+1 ·2026-10-08 ·Sofia Kuperman, Ezra Ben-Abu, Yaron Veksler, Anna Zigelman, Sefi Givli +1 more
similarity 0.52
Abstract

Thermodynamic cycles are the foundation of energy conversion across natural and engineered systems, transforming heat into useful work. However, these cycles traditionally operate between fixed thermal reservoirs, restricting them to specific locations and temperature differences. Here, we introduce autonomous thermodynamic cycles enabled by robotic mobility and sensing, allowing robots to perform thermodynamic cycles by accessing spatially varying temperature fields. We experimentally realize this concept using multistable gas-filled capsules that circulate within the system across a thermal gradient. Our model reveals that rapid transitions in the capsules' energy states allow the system to operate as a mobile heat engine that harvests and stores energy. By linking the capsule-scale internal energy dynamics to the robot's large-scale navigation strategy, we optimize locomotion paths that balance motion cost and energy harvesting. These findings demonstrate that thermodynamic cycles can emerge when autonomous systems navigate their environments, offering an artificial analog of organisms that forage for energy across spatial resources.

0.28

Recompositional Robotics: Cross-Domain, Open-set, and Lifelong Modularity Beyond Morphology

cs.RO ·2026-09-29 ·Steven Swanbeck, Jonathan Salfity, Corrie Van Sice, Robert Blake Anderson, Mitch Pryor
published similarity 0.52
Abstract · 2026 IEEE/RSJ IROS Workshop on Reconfigurable Modular Robots

Research in modular robotics has produced capable approaches allowing a robot's morphology to change online, with recent efforts also developing approaches to decide which morphology to assume and automatically propagate that decision into the robot's motion planning and control. These approaches are powerful and increase adaptability in the field. However, an alternative objective is not to build robots whose structures can change, but robots whose fundamental capabilities can change, where capability is a joint function across several domains, including kino-dynamics, perception, compute, and high-level coordinating behaviors. A robot designed to be reconfigured across these domains has a greater capacity to alter its capability than one that can be reconfigured in a single domain. We refer to this cross-domain reconfigurability as integration span, and recognize a complementary measure of the resistance to reconfiguration, which we refer to as integration inertia. Current modular robots have reduced integration inertia in the structural domain while it remains high in the other domains that contribute to integration span. We assert that the systems that can provide the most utility through reconfiguration in practice are those maximizing span and minimizing inertia and call this general problem recompositional robotics: adaptation over a heterogeneous set of modules including hardware, software, compute, and behavior that abstracts each component by the interfaces it requires and provides such that they can be reasoned over holistically. We define the problem, ground it in two deployed systems and active research efforts, and pose open questions about the future of recompositional robotics.

0.28

Fetch My Beer: Synthetic-to-real Hierarchical Policy for Smooth Pick-and-place

cs.RO ·2026-09-16 ·Yingyue Li, Chenyangguang Zhang, Ruida Zhang, Bowen Fu, Guangyao Zhai +1 more
top venuecode/data similarity 0.52
Abstract · 8 pages, 4 figures. Accepted by IEEE Robotics and Automation Letters (RA-L)

Many real-world robotic applications require dynamically sensitive manipulation, where success depends not only on reaching a target state but on maintaining stable object dynamics throughout execution. We study the stable transport of liquid-filled containers, where a robot must move objects to target locations while suppressing sloshing and preventing spillage. Unlike conventional pick-and-place, this task imposes stringent requirements on motion smoothness and trajectory-level stability, exposing clear limitations in existing systems. Specifically, fluid simulation remains too costly for online reinforcement learning; human teleoperation introduces unintended accelerations that induce sloshing during imitation learning; and current policy pipelines optimize for task completion rather than dynamic stability. We propose a synthetic-to-real framework coupling physically validated data generation with a hierarchical, diffusion-based controller. The scalable data pipeline synthesizes grasps, filters unstable poses via a vision-language model, and validates transport trajectories through fluid simulation. The policy is organized with a high-level module that translates language and visual observations into SE(3) control targets, and a latent diffusion controller that first plans efficiently in a compact latent space and then decodes dense action chunks, enabling the high control frequency needed for smooth and stable motion. Extensive experiments show our system outperforms state-of-the-art manipulation policies in transport smoothness and dynamic stability. Our project page: https://fetch-my-beer.github.io/

0.55

Autonomous Structural Discovery Of Bioprocess Dynamics And Kinetics Via LLM-Driven Agents

cs.AI math.OC ·2026-10-26 ·Erdal Aydin, Yaman Arkun
similarity 0.52
Abstract

High-fidelity digital twins in continuous biomanufacturing are often bottlenecked by incomplete kinetic models, while standard data-driven algorithms (e.g., SINDy, PINNs) lack interpretability or impose rigid physical assumptions. This paper introduces a hybrid closed-loop architecture for autonomous kinetic state-space discovery driven by a Large Language Model (LLM) agent. The framework employs a sequential "isolation-peeling" methodology across orthogonal operational regimes. This algorithmic peeling mathematically decouples entangled multiplicative (inhibitory) and additive (catalytic) biological rate law. Grounded in a Two-Level Retrieval-Augmented Generation (RAG) library, the framework utilizes Moving Horizon Estimation (MHE) and logarithmic decomposition to decouple complex cell growth kinetics into orthogonal multiplicative (inhibitory) and additive (regulatory) residual channels. When statistical degeneracy occurs an Active Design of Experiments (DoE) controller dynamically triggers targeted perturbations to decorrelate competing model hypotheses. Evaluated on a continuous stirred-tank reactor exhibiting unmodeled Haldane inhibition, Luong product toxicity, and secondary metabolite autocatalysis, the framework autonomously expanded the state space and recovered ground-truth parameters with under 6% error without a priori kinetic knowledge.

0.26