CS Paper Radar

A Beam-Switched Sparse Circular Array for Passive Wi-Fi Sensing

Yang Chen, Riccardo Bersan, Daniele Piazza, Stefano Savazzi, Michele D'Amico

eess.SP cs.IT ·submitted 2026-11-02 01:46 UTC · v1

Abstract

Wi-Fi sensing applications require unambiguous angle-of-arrival (AoA) estimation over the full azimuth plane. Uniform circular arrays (UCAs) are shown to remove this ambiguity, but deploying the four RF chains typically available on commercial Wi-Fi chipsets into a sparse layout suffers from spatial undersampling. Such undersampling produces strong grating lobes. To overcome this hardware bottleneck, we first establish a generalized array manifold incorporating element radiation patterns, revealing the suitability and degradation mechanisms of directional UCAs. Then we propose an angularly staggered beam-switched UCA architecture that leverages the spatial complementarity. Numerical evaluations demonstrate that the proposed scheme effectively mitigates grating-lobe ambiguities without increasing the number of RF chains, significantly reducing AoA estimation outliers and improving omnidirectional tracking performance.

Comment
5 pages, 8 figures. Submitted to EuCAP 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Sparse Rotatable Arrays (SRA): Unifying Array Aperture and Antenna Directivity for Wireless Communications

cs.IT ·2026-08-12 ·Ailing Zheng, Qingqing Wu, Xiyuan Liu, Wen Chen
similarity 0.62
Abstract

Sparse rotatable array (SRA) is a novel reconfigurable antenna architecture that jointly exploits sparse aperture configuration and antenna directivity to enhance spatial resolution for future wireless communications. Specifically, SRA activates a subset of rotatable antennas over a large candidate aperture and adjusts their boresight directions, thereby creating a directionally selective sparse aperture with reduced hardware requirements and enhanced spatial flexibility. In this paper, we investigate an SRA-aided multi-group communication system, where users are organized into spatial groups with different service requirements. We develop a group-aware SRA design framework by jointly optimizing the sparse-aperture allocation, RA orientations, and transmit beamforming to maximize the weighted max-min signal-to-interference-plus-noise ratio (SINR). Then, we characterize the operating principles of SRA and reveal that sparse aperture improves spatial resolution by enlarging the effective array aperture, while antenna directivity suppresses inter-group coupling through directional control, thereby enabling simplified group-wise beamforming structures. Guided by these insights, we develop a structured low-complexity alternating optimization algorithm that embeds a closed-form projected group-center RA orientation rule into the sparse-aperture allocation and beamforming design. The proposed algorithm combines analysis-guided initialization, sampled multi-start antenna-allocation search, and bisection-based second-order cone programming for beamforming. Numerical results show that the proposed SRA design closely approaches fully-shared SRA benchmarks and significantly outperforms compact subarray and omni sparse-array schemes.

0.04

One ISAC Array, Two Worst Cases: Hardware Impairments in Beamforming and AoA Estimation

eess.SP ·2026-11-04 ·Xuan Chen, Luc Le Magoarou
similarity 0.62
Abstract

In integrated sensing and communication (ISAC), the same base-station array beamforms toward users and estimates their angle of arrival (AoA). In this paper, we study how element-level gain, phase, and position errors affect both functions of a beam-scanning uniform linear array. Any array produces a correlation peak at the true angle, of finite height and width, surrounded by sidelobes. Impairments shift this peak, make it lower and wider, and raise the sidelobes relative to it. A single decomposition explains these three effects: the gain-weighted least-squares fit of the per-antenna phase errors splits them into a tilt, which shifts the peak, and a residual, whose power is taken from the peak and redistributed over the sidelobes according to its spatial spectrum. A beam steered toward the strongest direction suffers from the lower peak only, whereas the AoA estimate suffers from its shift even without noise, and also from the lowering and sidelobes with noise. The worst cases for the two ISAC functions are thus nearly disjoint, and we characterize both: the worst case for beamforming leaves the AoA estimate unbiased, and the worst case for localization loses little beamforming gain. The worst case for localization is a single defect at the junction between two subarrays, and its error, relative to the main-lobe width, does not decrease with the number of antennas. We also characterize random impairments and the effect of noise. In practical terms, our analysis shows that the calibration of a dual-function array must be assessed with respect to both functions.

0.23

RF Chain Count to Mitigate Beam Split in Wideband Hybrid Arrays: From Far-Field to Near-Field

eess.SP ·2026-10-05 ·Ahmed Hussain, Asmaa Abdallah, Abdulkadir Celik, Ahmed M. Eltawil
similarity 0.62
Abstract

Deploying large antenna arrays transitions wireless communication into the radiative near-field (NF), where spherical wavefronts enable beamfocusing in the joint angle-distance domain. However, wideband beamforming with large antenna arrays suffers from beam split across both spatial dimensions. Although fully digital arrays can eliminate this impairment, their prohibitive hardware cost and power consumption motivate the adoption of hybrid array architectures equipped with a limited number of radio-frequency (RF) chains. This paper investigates the minimum number of RF chains required to mitigate the beam split. We derive closed-form expressions for the required number of RF chains in fully-connected (FC) architectures and propose an algorithm for sub-connected (SC) architectures, considering both uniform linear arrays (ULAs) and uniform circular arrays (UCAs). Our analysis reveals that beyond a focal distance of 10L, where L denotes the aperture length, the NF RF chain count converges to its far-field counterpart and becomes a function of the angle alone. Moreover, the FC hybrid architecture mitigates the beam split by using fewer RF chains than the SC architecture, albeit at the cost of increased complexity in the phase shifter network.

0.14

Array Rotation in Near-Field ISAC: Communication, Detection, and Estimation Under Low-Complexity Transmit Architectures

eess.SP cs.IT ·2026-10-22 ·Marziyeh Soltani, Mark F. Flanagan
similarity 0.61
Abstract

This paper studies near-field integrated sensing and communication (ISAC) with a rotatable base-station array under an exact spherical-wave propagation model. For a general transmit covariance, we derive a Cramér--Rao bound (CRB) decomposition that separates target-side geometry from transmit-covariance-dependent terms. We then specialize the framework to two representative low-complexity architectures: a single-stream superposition architecture, and a dual-waveform split architecture design. We characterize the communication-, detection-, and estimation-optimal rotations for each architecture using the exact finite-array model. In addition, we show how a second-order approximation yields compact approximate expressions for the optimal rotation angles. We also study uncertainty in the target state used for beamforming design through a correlated Gaussian perturbation model, and derive approximations of the optimal robust rotation angles for target sensing and detection. The analysis shows that the two architectures behave differently under rotation: the single-stream design can align communication and detection tasks, whereas the dual-waveform design exhibits a direct communication--detection tradeoff and can incur a larger communication loss when sensing is prioritized. Numerical results show clear gains over a fixed array orientation, especially for range estimation, and close agreement between the approximate and exact rotation choices. Detection is less affected by target-state errors than estimation in the considered cases.

0.11

Spherical Tessellation of Circular Arrays for Massive MIMO: Favourable Propagation Conditions and Spectral Design

cs.IT ·2026-11-19 ·Geili T A El Sanousi, Tuan Anh Le, Raed A A Abd-Alhameed, Xin-She Yang, Huan X Nguyen
theory similarity 0.59
Abstract

Upper-mid-band XL-MIMO can exploit line-of-sight propagation, but periodic uniform cylindrical arrays may produce grating ridges. We analyse a spherically tessellated concentric circular antenna array with non-separable facet orientations. Under fixed normalised chord spacing and ideal facet visibility, we prove that user channels become asymptotically orthogonal and matched-filter SINR approaches the single-user SNR. Simulations confirm interference decay and SINR convergence. A spectral comparison shows that facet-normal diversity prevents the full-amplitude grating ridges of the cylindrical baseline, with the inter-facet residual decaying with array size.

0.37

Enabling Versatile Human Sensing through Wi-Fi Beamforming Feedback

eess.SP ·2026-11-12 ·Jingzhe Zhang, Peiliang Wang, Yitong Shen, Ning Wang, Mingzhe Chen +1 more
similarity 0.59
Abstract

Wi-Fi sensing enables contactless human sensing, while most existing systems rely on Channel State Information, which is accessible only on a limited range of Wi-Fi chipsets. In contrast, Beamforming Feedback Information (BFI) is standardized in modern Wi-Fi and readily accessible on a wide range of commodity devices, offering new opportunities for human sensing. In this paper, we present BeamLens, a Wi-Fi sensing system that extracts fine-grained spatial information from BFI to enable versatile human sensing. Specifically, we jointly estimate the angle of departure and relative time of flight from BFI to extract fine-grained spatial information and leverage two AP-STA links to capture complementary azimuth and elevation views. We further design a sparse physical antenna array and construct a uniform virtual antenna array to enhance spatial resolution. Moreover, we fuse complementary views through self-supervised learning, combining temporally aware cross-view contrastive learning and temporal masked reconstruction to learn a versatile backbone for diverse human sensing tasks. Extensive evaluations demonstrate that BeamLens achieves 90.16\% accuracy in human activity recognition, a mean per-joint position error of 8.64\,cm in 3D human pose estimation, and 70.64\% intersection over union in human silhouette estimation, while exhibiting strong generalization to unseen environments and subjects.

0.11

Wideband Large-Array Processing and Sparse Design for Angle Imaging

eess.SP ·2026-08-13 ·Ziyu Zhou, Wei Dai
similarity 0.59
Abstract · Submitted to IEEE Transactions on Signal Processing. 13 pages, 9 figures

This paper shows that wideband large-array processing can recover a large number of angle pixels with far fewer antenna elements. The key advantage of wideband signaling is that different frequencies induce different virtual arrays, whose union forms a virtual array with a substantially increased number of effective virtual elements. Thus, a sparse physical array can support far more spatial samples than physical antennas. Motivated by this capability, we study the recovery of angular responses across the full field of view $[-90^\circ, 90^\circ)$, discretized according to the improved angular resolution, and refer to this sensing regime as angle imaging. However, the resulting virtual array is inherently irregular, clustered, and does not automatically guarantee stable recovery. To address this challenge, we introduce a coverage criterion that estimates the number of stably recoverable angle pixels, without computationally intensive singular-value-based conditioning tests over candidate image dimensions. For systems satisfying this criterion, we theoretically establish deterministic condition-number bounds that characterize stable angle imaging. Building on this criterion, we derive non-uniform sparse array designs that minimize the number of physical antennas while maintaining recovery over the full field of view. Simulation results show that the proposed criterion provides practical guidance for stable system design, and that the resulting sparse arrays can recover substantially more angle pixels than the number of physical antennas, with representative designs supporting over ten times as many angle pixels as physical antennas.

0.12

Hybrid Continuous DoA Estimation with Shared-Radius Co-Prime Circular Arrays

cs.IT cs.NI ·2026-09-08 ·Keyvan Aghababaiyan
theory similarity 0.58
Abstract

This paper proposes a shared-radius co-prime circular array for high-resolution, continuous 2D Direction-of-Arrival (DoA) estimation in 3D space, jointly estimating azimuth and elevation angles. The proposed architecture consists of two uniform circular sub-arrays with co-prime antenna counts sharing a common radius RR, a design that intrinsically suppresses mutual coupling leakage compared to dense uniform arrays. Unlike existing works that rely on complex phase-mode transformations to map circular structures to virtual linear arrays, we introduce a hybrid continuous-recovery framework operating directly in the physical spatial domain. By integrating a fast, discrete coarse-grid search with a swarm-intelligence continuous refinement stage, the proposed method completely bypasses discrete grid-mismatch limitations and computationally expensive eigenvalue decompositions. A rigorous theoretical analysis using Nivens Theorem establishes the spatial uniqueness of the true source direction, effectively resolving phase ambiguities. Simulation results demonstrate that this hybrid scheme achieves superior resolution and lower Root Mean Square Error (RMSE) at low Signal-to-Noise Ratios (SNR) compared to uniform configurations, while asymptotically converging to the theoretical Cramer-Rao Bound (CRB) at high SNRs.

0.20