CS Paper Radar

Adjustment control usability and dynamic accommodation in office chairs: A comparative study of two contemporary designs

Yejin Kang, Dusan Baek, Dongwoo Park, Kitae Hwang, Woojin Park

cs.HC ·submitted 2026-11-02 03:15 UTC · v1

Abstract

Adjustability is a core determinant of ergonomic fit in office chairs, but its benefits depend on users being able to operate the controls and, on the chair, continuing to support the body as posture changes during work. We compared two high-end office chairs, the T90 (Sidiz; Chair A) and the Aeron (Herman Miller; Chair B), in two experiments to explore which design features may explain differences between them. In Experiment 1, 20 participants adjusted ten controls common to both chairs and rated perceived adjustment difficulty on four items. Chair A had significantly lower overall difficulty (Wilcoxon signed-rank test, p = 0.008), with control-level advantages for headrest angle, armrest height, armrest rotation angle and lumbar support position; Chair B was easier for seat height, possibly because its side-mounted lever is more visible than Chair A's underside button. The headrest comparisons involved a third-party headrest fitted to Chair B, and control- and item-level tests were not corrected for multiple comparisons. In Experiment 2, the same participants completed a 15-minute multi-device task requiring repeated posture changes, reach and reorientation, then rated body-part discomfort, general comfort and satisfaction with five components. Discomfort and comfort did not differ; Chair A had higher satisfaction for the seat-pan and lumbar support (exploratory, uncorrected). Interviews suggested links to mechanism properties: Chair B's rear lumbar dial was often described as producing little perceptible change, and for controls without significant differences each chair appeared to leave a different aspect of the same need unmet. These findings suggest mechanical and interface properties that designers of adjustable office chairs may consider for dynamic, multi-device work.

Comment
21 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

A dynamic backrest may help accommodate trunk movement, and multi-device work elicits more of it: An exploratory comparison of high-end office chairs under single- and multi-device tasks

cs.HC ·2026-11-02 ·Yejin Kang, Dusan Baek, Dongwoo Park, Kitae Hwang, Woojin Park
similarity 0.79
Abstract · 22 pages, 4 figures

Dynamic-sitting office chairs are usually compared with static sitting rather than with each other, and the contribution of backrest deformability (lateral backrest movement) is unknown. Office work also increasingly spans multiple devices. Twenty healthy adults (10 men, 10 women) completed a 15-minute single-device and a 15-minute multi-device proofreading task on each of three chairs: two commercial dynamic-sitting chairs (T90, Aeron) and a T90 whose backrest lateral movement was mechanically fixed (T90-fixed). We recorded subjective ratings, head and trunk posture (inertial measurement units), upper trapezius and lateral gastrocnemius activity (electromyography), and task performance. Chair effects were largely null: T90 and Aeron did not differ in ratings or performance, posture and muscle activity showed only isolated, direction-inconsistent differences, and preferences were polarized. The standard T90 showed greater trunk movement (mean absolute angular velocity in yaw) than T90-fixed during the multi-device task (p = 0.042), which may indicate that its movable backrest helps accommodate trunk movement under demanding work; no other whole-sample posture, muscle, rating or performance measure differed between these two configurations, and replication is needed. Task effects were large and consistent: the multi-device task elicited greater and faster head, trunk and shoulder movement and higher upper trapezius activity than the single-device task, with lower reading throughput. Multi-device work thus imposes substantially greater movement demands than single-device work, which supports designing chairs that accommodate movement in modern work environments.

0.42

Biomechanics do not predict perceptual and cognitive consequences of force augmentation

cs.RO ·2026-10-30 ·Maria Molina-Sanchez, Francesco Missiroli, Viktorija Pavalkyte, Mabel Ziman, Julien Russ +5 more
code/data similarity 0.56
Abstract · 43 pages, 3 main figures, 3 supplementary figures, 3 supplementary tables, 3 supplementary movies. Supplementary movies available at https:/…

Wearable force-augmentation technologies, including exoskeletons and soft exosuits, are being developed for occupational and rehabilitation settings to enhance performance by reducing the muscular demands of movements. Yet enhanced performance also requires users to perceive the environment accurately, adapt to changing conditions, and decide whether actions are worth their physical cost. We used an elbow-assisting exosuit to investigate the physiological, perceptual and cognitive consequences of force augmentation during lifting. We assessed weight perception, adaptation in a volatile environment, and effort-based decision-making with and without assistance. While assistance reduced muscle activity, its behavioural outcomes did not simply reflect this biomechanical change. Assistance reduced perceived weight, but this effect was strongly shaped by participants' initial experience. Assistance also selectively reduced adaptation to changing environmental contingencies. Finally, reducing the muscular demands of lifting did not translate straightforwardly into how demanding the action felt or whether participants chose to perform it: differences in effort-based decisions were shaped by initial experience rather than simply tracking reductions in muscle activity or perceived fatigue. Together, we show that the perceptual and cognitive consequences of force augmentation cannot be inferred from its biomechanical benefits alone. Effective augmentation therefore requires perceptual and cognitive outcomes to be evaluated alongside physical performance.

0.49

Passthrough Rigidity: The Behavioral and Visuomotor Costs of Mediated Perception

cs.HC ·2026-09-21 ·Markus D. Solbach, Mohit Goyal, Sakar Khattar, Jayant Varma, Bjorn Vlaskamp +2 more
publishedcode/data similarity 0.55
Abstract · 10 pages, 16 Figures, ISMAR

Broad public adoption of head-mounted displays using video passthrough remains elusive despite significant market investment. A precise understanding of why users experience persistent discomfort even as hardware factors such as resolution and latency have dramatically improved remains an open issue. This paper investigates the impact of viewing the world through video passthrough systems on human behavioral and physiological patterns through a large-scale multimodal study. We developed a novel protocol to capture synchronized oculomotor, kinematic, and physiological data during a block assembly task requiring complex hand-eye coordination. Using a within-subject design (N=110), we evaluated both natural and passthrough viewing conditions. Our results reveal a four-fold suppression of rotational head velocity and a pronounced decoupling of head-gaze coordination. This suggests motor caution being employed as an adaptive strategy - which we term "Passthrough Rigidity". This phenomenon appears to shift the information-gathering burden to the oculomotor system, resulting in significantly longer fixation durations and restricted visual search patterns. These kinematic shifts directly correlate with poorer task performance and measurable physiological cost, evidenced by a significant reduction in blink duration and increased reports of ocular strain and cognitive load. We conclude that current passthrough implementations induce a measurable shift from flexible exploration to motor caution, where task performance is preserved at the cost of user comfort and biomechanical efficiency. These findings provide a novel quantitative framework for evaluating and improving future XR devices, establishing that resolving "comfort" for passthrough requires addressing the deep-seated biomechanical compensations caused by mediated perception. Data available at https://data.nvision.eecs.yorku.ca/Passthrough

0.29

Locomotion Variability and User Experience in Smart Wheelchair Human-Robot Interaction

cs.RO cs.HCeess.SY ·2026-08-11 ·Sean Kille, Adina M. Panchea, Balint Varga, Sören Hohmann
similarity 0.54
Abstract · 15 pages, 7 figures

Human movement is inherently variable, with variability structured according to task relevance: movements are typically more consistent at task-critical points and more flexible elsewhere. In human-robot interaction (HRI), however, model-based assistance strategies commonly assume deterministic human behavior and suppress such variability, potentially altering how interactions are experienced and lowering sense of agency. While movement variability is increasingly recognized as functionally meaningful, its deliberate preservation in assisted interaction, and its consequences for user experience, remain underexplored. In this paper, we empirically investigate how different assistance strategies shape human movement variability, task performance, and subjective interaction experience in a shared control setting. We introduce an autonomy-supportive shared control strategy that preserves users' natural movement structure. This approach is evaluated in a user study in which participants push an intelligent powered wheelchair under three conditions: no assistance, conventional variability-reducing assistance, and variability-preserving assistance. While task-relevant performance remained comparable across assisted modes, preserving natural movement variability led to more favorable interaction experiences. In particular, participants reported significantly higher perceived agency compared to conventional assistance and highest perceived usefulness. These findings suggest that variability-aware assistance can support both performance and user autonomy in physical human-robot collaboration. More broadly, the results highlight the importance of designing assistive robotic systems that respect the embodied structure of human movement rather than treating variability as noise to be neglected or eliminated.

0.10

ErgoAssist: Cognition-Aware Posture Feedback in Wearable Ergonomic Systems

cs.HC ·2026-08-31 ·Sarmistha Sarna Gomasta, Bhawana Chhaglani, VP Nguyen, Prashant Shenoy
similarity 0.52
Abstract

Prolonged digital device use has made poor posture and musculoskeletal discomfort pervasive among knowl- edge workers. Existing ergonomic wearables rely solely on posture thresholds, frequently interrupting users during high-focus moments and leading to alert fatigue and abandonment. Yet posture and cognitive load are closely coupled, and most systems remain cognitively unaware. We present ErgoAssist, a head-worn ergonomic assistant that detects poor posture using IMU-based head tracking and estimates task-induced cognitive load using a consumer-grade EEG headband for continuous everyday use. In a controlled lab study, ErgoAssist achieves 81% posture classification and 90.2% task induced cognitive load estimation accuracy under leave-one-subject-out evaluation. In a preliminary real-time deployment, cognition-aware alerting reduces alert frequency by 81%, improves perceived usability by 43%, task performance by 25%, and improves posture correction rate by 38%, delivering fewer but better-timed interventions rather than merely suppressing alerts.

0.37

AdapTest: Supporting Designers in Authoring and Evaluating Environmentally Responsive User Interfaces for Extended Reality

cs.HC ·2026-10-15 ·Jungwoo Rhee, Guhn Lee, Yumin Jung, Mustafa Doga Dogan, Kongpyung +2 more
published similarity 0.52
Abstract · Accepted to PACM HCI ISS 2026

Extended Reality (XR) headsets increasingly host familiar 2D user interfaces as windows floating in physical environments. However, their usability depends on environmental conditions that designers cannot fully control. Current design workflows often separate how a variant is designed from how it actually looks in the target environment. We present AdapTest, an in-situ authoring and testing tool that lets designers select interface elements, define when and how they change, compare the resulting variations, and test their activation without coding. Based on prior research and a formative study with 12 interface designers, the system targets three key environmental variables: distance, lighting, and occlusion. We evaluated AdapTest against a desktop design and in-headset preview workflow in a within-subjects study with 12 designers. Compared with the baseline, designers accounted for a wider range of environmental factors, addressed more overlapping conditions, and repeatedly tested and revised their designs in place; there were no significant differences in workload or usability despite longer sessions. Our work contributes an integrated, designer-centered approach to adapting, comparing, and validating environmentally responsive XR user interfaces.

0.30

User Preferences for UI Anchoring in MR: Effects of Task Mobility and Interface Properties

cs.HC ·2026-08-28 ·João Belo, Sina Elahimanesh, Anna Maria Feit
top venue similarity 0.51
Abstract · Accepted to IEEE International Symposium on Mixed and Augmented Reality 2026

Anchoring - the choice of frame of reference for mixed reality (MR) interface elements - is a critical design decision involving trade-offs between accessibility, interaction comfort, and visual interference. Despite its importance, user preferences for anchoring across different mobility contexts and interface properties remain poorly understood, as prior work has largely focused on specific tasks or fixed interface configurations. We address this through a mixed-methods user study in which participants configure anchoring strategies across different mobility conditions and interface types. Combining behavioral analysis with structured qualitative inquiry, we analyze how participants select and reason about anchoring modes. Our results show a clear transition from world-anchored interfaces in stationary contexts to body-anchored interfaces during locomotion. However, no single body anchor consistently dominates, highlighting the personal nature of anchoring strategies. Our qualitative analysis reveals the factors users consider in their anchoring decision, including interface accessibility, stability during interaction, visual clutter, and individual mental models. These findings inform the design of adaptive and controllable MR interfaces and highlight the importance of supporting user customization.

0.53

The Role of Variability in Human-Machine Interaction Experience

cs.HC eess.SY ·2026-08-11 ·Sean Kille, Jan Lars Hagemann, Anne Voormann, Balint Varga, Andrea Kiesel +1 more
similarity 0.50
Abstract · 19 pages, 7 figures

Human-machine interaction (HMI) requires control strategies that account for the nature of human motor behavior. Conventional shared-control and haptic-assistance methods typically ignore the stochastic nature of human behavior, potentially limiting both performance and human interaction experience. In this study, we designed an experimental setting and evaluated a novel human-variability-aware optimal controller. Participants performed a physically coupled haptic interaction task in three conditions: a controller mode that aims at conventionally reducing overall variability, a variability-aware controller mode designed to maintain human natural variability patterns, and a human-only control condition serving as a baseline. We analyzed behavioral variability, task performance, and human interaction experience. The results show that considering natural movement variability significantly increased perceived interaction quality in terms of usability while maintaining task performance. These findings highlight the importance of incorporating stochastic human movement characteristics into shared-control designs and demonstrate the feasibility and benefits of the proposed control strategy for human-centered control design of HMI.

0.10