CS Paper Radar

Delay-Certified Readiness Barriers for Overactuated Multirotor Allocation Without Lipschitz Constants

Giuseppe Silano

cs.RO eess.SYmath.OC ·submitted 2026-11-02 17:33 UTC · v2

Abstract

Overactuated multirotors can produce the same wrench with many rotor-speed combinations, some of which leave the vehicle unable to change its wrench quickly, e.g., to reject a gust. Readiness barriers keep this ability, the readiness, above a floor, but only in continuous time; with sampled commands and varying speed-controller delays, the available robustness bound covers less than one millisecond. We remove this limit by exploiting the structure of the problem: each rotor responds monotonically and in closed form to its own torque, so the speeds reachable under uncertain switching times lie in a cheaply computed box, and the lowest readiness over that box sits at a corner known in advance. This yields a Lipschitz-free test that a command keeps the readiness above its floor until the next sample, plus a fallback torque that keeps the vehicle on a certified plan. In hexarotor simulations with 2--40~ms delays and $\pm2$~ms jitter, the filter never violated the floor. At $10\pm2$~ms, it matched a delay-compensating predictor within the design envelope and cost 2--30\% more tracking error beyond it, where the predictor alone violated the floor in 2 to 16 of 16 missions. A tuned robust predictor was also safe with synchronous switching, but not with per-rotor jitter.

Comment
This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Readiness Barrier Functions: Forward-Invariant Control Authority for Overactuated Multirotor Allocation

cs.RO eess.SYmath.OC ·2026-08-17 ·Giuseppe Silano
similarity 0.70
Abstract · This work has been submitted to the IEEE for possible publication

Allocation schemes that greedily maximize a readiness metric over the actuator fiber bundle of an overactuated multirotor produce commands that jump between disconnected optimal strata, demanding actuator rates no motor can deliver; effort-minimizing schemes are continuous but cannot guarantee that wrench-rate authority stays above any certified level. We reconcile the two by treating authority as a forward-invariant quantity: a control barrier function on the log-determinant of the drag-aware actuator-authority co-metric, enforced at torque level by a quadratic program in the allocation null space. A single design inequality renders the certified set compact and strictly interior to the actuator box, with the readiness cost of any rotor deactivation given in closed form as $\ln(n/(n{-}m))$ for symmetric designs. An explicit alignment ratio states when tracking can stay exact, otherwise the wrench error is bounded by $\mathcal{O}(ρ^{-1/2})$, and a robust variant handles motor-parameter uncertainty with a closed-form floor shift independent of the airframe matrix. On a hexarotor and a fully-actuated octorotor the closed-form gap matches simulation to machine precision. Over $300$ randomized missions, greedy maximization violates the certified floor in up to $51\%$ of authority-scarce missions, while the proposed filter never leaves the certified set and, in the hardest moment reversal, commits a $79\times$ smaller wrench error. The robust variant holds the floor on all $150$ perturbed plants. A high-fidelity simulation with measured propeller and motor data shows that the floor holds under unmodeled aerodynamics, electrical limits, and delay, and where it stops applying.

0.55

Tilt as a Certified Resource: Preserving Motor Wrench-Rate Authority on Articulated Multirotors

cs.RO eess.SYmath.OC ·2026-09-18 ·Giuseppe Silano, Martin Saska
similarity 0.64
Abstract · This work has been submitted to the IEEE for possible publication

Fully-actuated multirotor aerial vehicles must not only track nominal wrenches but retain the "readiness" to modulate them rapidly under disturbances. Classical effort-minimizing allocators ignore this dynamic limit, whereas maximizing readiness leads to topologically disconnected optimal sheets demanding physically impossible actuator rates. Enforcing a readiness safety floor on fixed-geometry symmetric platforms further encounters a zero-sum degeneracy: motor-speed redistribution cannot improve authority without conceding wrench tracking. This paper uses active morphology to break the degeneracy, treating servo tilt as a geometric resource supplying authority-recovery directions unavailable to static rotors. We construct a configuration-dependent, motor-only readiness certificate - the log-volume of the reachable wrench-rate set - that explicitly excludes servo capacity, preventing a "ghost capacity fallacy" in which the certificate would falsely credit slow mechanical kinematic limits instead of collapsing accurately at motor saturation. The certificate is enforced as a Control Barrier Function (CBF) within a Unified Physical-Command Quadratic Program acting on motor torques and servo setpoints. Closed-loop simulations of an articulated octorotor under severe gust disturbances show classical allocators diverging and uncertified articulated allocators violating the safety floor, while the proposed CBF filter bounds the system state and preserves vehicle authority.

0.34

Escape-Aware Control Barrier Functions for Quadrotor Safety under Body-Rate Limits

cs.RO ·2026-09-15 ·Lei Shi, Haosong Wen, Qichao Liu
similarity 0.60
Abstract

Control barrier functions for input-constrained systems place the admissible input set inside the definition of the safe set, yet the resulting barrier is almost always a function of the state alone; On a quadrotor this is not cosmetic: because the thrust vector must be reoriented before it can decelerate an approach, and reorientation is limited by the attainable body rate, a state-only barrier certifies states from which no escape is reachable in time; We characterize the certification gap in closed form and show its width is proportional to closing speed and inversely proportional to the body-rate limit; We then define an escape barrier on the augmented pair of state and previously applied input, with escape authority measured over the one-step reachable thrust cap; It admits a closed form and an analytic inverse for the maximum certifiable closing speed, and embeds in a predictive controller at no additional state cost; Across 550 paired closed-loop episodes on a 13-state quadrotor, the proposed controller completes every tested scenario, whereas the stopping-distance barrier enforced over the same horizon fails 15% and 25% of episodes in exactly the two scenarios that enter the predicted gap; Against an online backup-CBF baseline enforcing the same escape condition at the reached state, it holds a 29-74 degree larger directional margin and 3-18 times the clearance, and an independent conservative rollout referee finds no certified state from which escape fails.

0.34

Residual Wrench Certification and Margin-Aware Control Synthesis for Aerial Physical Interaction

cs.RO eess.SY ·2026-09-30 ·Abhimanyu Khadga, Abhinav Sinha, Shashi Ranjan Kumar
similarity 0.52
Abstract

We develop a task-relative framework for certifying residual wrench authority after hover and contact loading in multirotors with bounded actuators. Using convex geometry, we derive signed margins for prescribed convex reserves, including Euclidean balls and weighted ellipsoids. We obtain computable reserve certificates from actuator-interiority bounds to support slack-maximizing allocation. To preserve the required reserve, we propose command projection onto a tightened feasible set. We then connect the available reserve to structured gain synthesis and certify a local tracking region that respects actuator limits. Within this region, we establish nominal exponential convergence and robust ultimate boundedness. For the prescribed task and morphology family, we show that the optimized octarotor attains a larger margin than the optimized hexarotor at equal total thrust. We evaluate the proposed framework in closed-loop simulations of sustained rigid-wall contact using a fixed-geometry octarotor and a variable-tilt quadrotor with matched installed thrust. The quadrotor's local certificate admits a higher normalized push limit for the prescribed task family. In tests beyond the realizability boundaries, we observe the predicted loss of authority through rotor-thrust limits for the octarotor and tilt-servo limits for the quadrotor.

0.17

From Asymptotic to Designer-Assigned-Time Control: A Review of Stability Notions, Design Mechanisms, and Controller Architectures

eess.SY ·2026-10-08 ·Özhan Bingöl
surveybenchmark similarity 0.52
Abstract

Many control tasks require a target to be reached not only eventually but on time. Finite-, fixed-, predefined-, and prescribed-time control address this need, yet the labels are used loosely: a settling time that grows with the initial condition, a bound that holds for all initial conditions, a deadline chosen by the designer, and a limit attained only at the terminal instant often share one name. This review aims to make such claims comparable. It separates three questions that are often conflated: what temporal property is promised, which feature of the Lyapunov analysis produces it, and which controller architecture carries it into the closed loop. A recurring question is whether a guarantee proven for an idealized loop survives once observers, adaptation, disturbances, actuator limits, and digital implementation are included. The examined studies are therefore audited one by one, recording what each claims, which variable is actually certified, and how the result is validated. The audit shows that estimation and approximation errors often reduce an exact guarantee to a practical one, and that experimental evidence comes mostly from fast electromechanical systems. A scalar benchmark with two complementary tunings shows how much of the apparent difference between methods stems from conservative bounds, initial-condition dependence, and numerical tolerance, and how saturation and sampling can delay or remove a deadline. The review closes with open problems, among them deciding which deadlines a given plant can meet, combining certificates across interconnected subsystems, and preserving a guarantee through implementation.

0.18

Minimal Experiments for Robust Stabilization: Information, Spectral Geometry, and Duration

eess.SY math.OC ·2026-10-01 ·Alexey Peregudin, Ngoc Tuan Dinh
similarity 0.51
Abstract · 12 pages, 1 table. Submitted to IEEE Transactions on Automatic Control

On broad classes of linear systems, the shortest experiments are almost as good as the best possible ones. For $n$ states and $m$ inputs, the shortest input sequences that support robust data-driven stabilization of every controllable plant have $mn+1$ steps with exact states and $m(n+1)$ with noisy states. We show that, when the spectral radius is bounded and the spectrum is well separated near the unit circle, these sequences tolerate a fixed fraction of the error level achievable by any experiment, even one designed with full plant knowledge and allowed to use any finite duration. This constant-factor comparison can fail for slowly actuated systems. For $A=I+hG$ with controllability depth $ν\ge2$, short experiments lose a factor of order $h^{ν-1}$, and duration of order $1/h$ is both necessary and sufficient to recover a fixed fraction of the optimal tolerance.

0.56

Timely Activation of Safety Filters via One-Step Reachability Expansion

cs.RO ·2026-09-15 ·Javier Borquez
published similarity 0.51
Abstract

Least-restrictive safety filters based on Hamilton-Jacobi reachability provide strong safety guarantees by overriding a nominal controller only when the system reaches the boundary of the set of unsafe states defined as a Backward Reachable Tube (BRT). These guarantees, however, rely on the continuous-time nature of the underlying formulation. In practice, robotic systems apply control at discrete sampling intervals, which creates a mismatch where the system may jump into the unsafe BRT between updates, allowing failures that are theoretically avoidable. This work introduces a principled solution based on a one-step expanded BRT that predicts all states capable of reaching the true BRT within a single timestep. By using this expanded boundary as the activation condition for the safety filter, safety interventions occur early enough to ensure correctness under discrete-time execution. We formulate this expanded set as a modified reachability problem and compute it using standard continuous-time solvers.

0.40

LBA-CBF: Rapidly Adaptive Safety Filters via Parallel Dynamics Inference

cs.RO eess.SY ·2026-10-06 ·Maitham F. AL-Sunni, Timeea-Andreea Radu, Hassan Almubarak, Henry Z. Liao, Michael Görner +2 more
theorycode/data similarity 0.50
Abstract · 8 pages

Control barrier functions (CBFs) certify commands through an assumed dynamics model, so an abrupt, unmeasured regime change can undermine the certificate exactly when safety matters most. We present Look-Back Adaptive Control Barrier Functions (LBA-CBF), which rank a finite bank of candidate dynamics by recent prediction error over a short look-back window and enforce the high-order CBF condition against every model within a tolerance of the best, spanning best-fit adaptation to full-bank robust filtering. The dynamics may depend nonlinearly on the unknown parameters, and no switching model or continuously parameterized estimator is required. We prove that any feasible filtered input satisfies the true CBF condition whenever a safety-representative candidate is retained. In quadrotor simulation with abrupt wind reversals and an unknown payload, LBA-CBF is safe and reaches the goal from all random initial conditions, matching an oracle, while adaptive and robust baselines achieve 0-88% success. Banks of up to 250,000 models run inside the control loop, and Crazyflie 2.1 and F1TENTH experiments demonstrate adaptation to wind, payload release, and varying tire-road friction. Code, videos, and project details are available at: https://lla-control.github.io

0.59