CS Paper Radar

Readiness Barrier Functions: Forward-Invariant Control Authority for Overactuated Multirotor Allocation

Giuseppe Silano

cs.RO eess.SYmath.OC ·submitted 2026-08-17 09:43 UTC · v2

Abstract

Allocation schemes that greedily maximize a readiness metric over the actuator fiber bundle of an overactuated multirotor produce commands that jump between disconnected optimal strata, demanding actuator rates no motor can deliver; effort-minimizing schemes are continuous but cannot guarantee that wrench-rate authority stays above any certified level. We reconcile the two by treating authority as a forward-invariant quantity: a control barrier function on the log-determinant of the drag-aware actuator-authority co-metric, enforced at torque level by a quadratic program in the allocation null space. A single design inequality renders the certified set compact and strictly interior to the actuator box, with the readiness cost of any rotor deactivation given in closed form as $\ln(n/(n{-}m))$ for symmetric designs. An explicit alignment ratio states when tracking can stay exact, otherwise the wrench error is bounded by $\mathcal{O}(ρ^{-1/2})$, and a robust variant handles motor-parameter uncertainty with a closed-form floor shift independent of the airframe matrix. On a hexarotor and a fully-actuated octorotor the closed-form gap matches simulation to machine precision. Over $300$ randomized missions, greedy maximization violates the certified floor in up to $51\%$ of authority-scarce missions, while the proposed filter never leaves the certified set and, in the hardest moment reversal, commits a $79\times$ smaller wrench error. The robust variant holds the floor on all $150$ perturbed plants. A high-fidelity simulation with measured propeller and motor data shows that the floor holds under unmodeled aerodynamics, electrical limits, and delay, and where it stops applying.

Comment
This work has been submitted to the IEEE for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

Tilt as a Certified Resource: Preserving Motor Wrench-Rate Authority on Articulated Multirotors

cs.RO eess.SYmath.OC ·2026-09-18 ·Giuseppe Silano, Martin Saska
similarity 0.78
Abstract · This work has been submitted to the IEEE for possible publication

Fully-actuated multirotor aerial vehicles must not only track nominal wrenches but retain the "readiness" to modulate them rapidly under disturbances. Classical effort-minimizing allocators ignore this dynamic limit, whereas maximizing readiness leads to topologically disconnected optimal sheets demanding physically impossible actuator rates. Enforcing a readiness safety floor on fixed-geometry symmetric platforms further encounters a zero-sum degeneracy: motor-speed redistribution cannot improve authority without conceding wrench tracking. This paper uses active morphology to break the degeneracy, treating servo tilt as a geometric resource supplying authority-recovery directions unavailable to static rotors. We construct a configuration-dependent, motor-only readiness certificate - the log-volume of the reachable wrench-rate set - that explicitly excludes servo capacity, preventing a "ghost capacity fallacy" in which the certificate would falsely credit slow mechanical kinematic limits instead of collapsing accurately at motor saturation. The certificate is enforced as a Control Barrier Function (CBF) within a Unified Physical-Command Quadratic Program acting on motor torques and servo setpoints. Closed-loop simulations of an articulated octorotor under severe gust disturbances show classical allocators diverging and uncertified articulated allocators violating the safety floor, while the proposed CBF filter bounds the system state and preserves vehicle authority.

0.34

Delay-Certified Readiness Barriers for Overactuated Multirotor Allocation Without Lipschitz Constants

cs.RO eess.SYmath.OC ·2026-11-02 ·Giuseppe Silano
similarity 0.70
Abstract · This work has been submitted to the IEEE for possible publication

Overactuated multirotors can produce the same wrench with many rotor-speed combinations, some of which leave the vehicle unable to change its wrench quickly, e.g., to reject a gust. Readiness barriers keep this ability, the readiness, above a floor, but only in continuous time; with sampled commands and varying speed-controller delays, the available robustness bound covers less than one millisecond. We remove this limit by exploiting the structure of the problem: each rotor responds monotonically and in closed form to its own torque, so the speeds reachable under uncertain switching times lie in a cheaply computed box, and the lowest readiness over that box sits at a corner known in advance. This yields a Lipschitz-free test that a command keeps the readiness above its floor until the next sample, plus a fallback torque that keeps the vehicle on a certified plan. In hexarotor simulations with 2--40~ms delays and $\pm2$~ms jitter, the filter never violated the floor. At $10\pm2$~ms, it matched a delay-compensating predictor within the design envelope and cost 2--30\% more tracking error beyond it, where the predictor alone violated the floor in 2 to 16 of 16 missions. A tuned robust predictor was also safe with synchronous switching, but not with per-rotor jitter.

0.19

Residual Wrench Certification and Margin-Aware Control Synthesis for Aerial Physical Interaction

cs.RO eess.SY ·2026-09-30 ·Abhimanyu Khadga, Abhinav Sinha, Shashi Ranjan Kumar
similarity 0.68
Abstract

We develop a task-relative framework for certifying residual wrench authority after hover and contact loading in multirotors with bounded actuators. Using convex geometry, we derive signed margins for prescribed convex reserves, including Euclidean balls and weighted ellipsoids. We obtain computable reserve certificates from actuator-interiority bounds to support slack-maximizing allocation. To preserve the required reserve, we propose command projection onto a tightened feasible set. We then connect the available reserve to structured gain synthesis and certify a local tracking region that respects actuator limits. Within this region, we establish nominal exponential convergence and robust ultimate boundedness. For the prescribed task and morphology family, we show that the optimized octarotor attains a larger margin than the optimized hexarotor at equal total thrust. We evaluate the proposed framework in closed-loop simulations of sustained rigid-wall contact using a fixed-geometry octarotor and a variable-tilt quadrotor with matched installed thrust. The quadrotor's local certificate admits a higher normalized push limit for the prescribed task family. In tests beyond the realizability boundaries, we observe the predicted loss of authority through rotor-thrust limits for the octarotor and tilt-servo limits for the quadrotor.

0.17

Emergent Underactuation in Fully Actuated Multirotors by Minimizing a Homogeneous Allocation Cost

cs.RO eess.SYmath.OC ·2026-10-03 ·Antonio Franchi, Barbara Bazzana
similarity 0.65
Abstract

Full actuation is commonly valued for independent position and attitude tracking. This work establishes a complementary principle: when only a position trajectory is prescribed, minimizing a positively homogeneous allocation cost selects underactuated-like behavior on a fully actuated multirotor. This cost class includes norms and power laws, including standard minimum-norm pseudoinverse allocation. We use fiberwise infimization to transport the actuator-output cost to wrench space, yielding a homogeneous infimal allocation cost. Restriction to unit zero-moment forces defines a directional landscape whose minimizing directions are independent of force magnitude. We show that aligning any fixed minimizing direction with the required world-frame force minimizes instantaneous and integrated zero-moment allocation costs. The resulting body force remains in a fixed one-dimensional subspace without transverse components. We derive an exact optimality-gap decomposition quantifying the additional cost of every other attitude trajectory and characterizing the minimum-cost class. When a disturbance or prescribed-motion change modifies the required-force direction, a fully actuated platform can immediately generate the modified force using transverse authority and reorient toward the new minimum-cost family. A structurally underactuated platform must reorient before generating that force. Thus, homogeneous allocation-cost minimization explains why optimal nominal motion can be underactuated-like, while full actuation remains valuable for disturbance rejection and transient force generation.

0.26

Escape-Aware Control Barrier Functions for Quadrotor Safety under Body-Rate Limits

cs.RO ·2026-09-15 ·Lei Shi, Haosong Wen, Qichao Liu
similarity 0.60
Abstract

Control barrier functions for input-constrained systems place the admissible input set inside the definition of the safe set, yet the resulting barrier is almost always a function of the state alone; On a quadrotor this is not cosmetic: because the thrust vector must be reoriented before it can decelerate an approach, and reorientation is limited by the attainable body rate, a state-only barrier certifies states from which no escape is reachable in time; We characterize the certification gap in closed form and show its width is proportional to closing speed and inversely proportional to the body-rate limit; We then define an escape barrier on the augmented pair of state and previously applied input, with escape authority measured over the one-step reachable thrust cap; It admits a closed form and an analytic inverse for the maximum certifiable closing speed, and embeds in a predictive controller at no additional state cost; Across 550 paired closed-loop episodes on a 13-state quadrotor, the proposed controller completes every tested scenario, whereas the stopping-distance barrier enforced over the same horizon fails 15% and 25% of episodes in exactly the two scenarios that enter the predicted gap; Against an online backup-CBF baseline enforcing the same escape condition at the reached state, it holds a 29-74 degree larger directional margin and 3-18 times the clearance, and an independent conservative rollout referee finds no certified state from which escape fails.

0.34

CBF-Based Control Allocation for Omnidirectional Tiltrotor Aerial Robots

cs.RO ·2026-10-15 ·Seobeom Lee, Hyondong Oh
similarity 0.60
Abstract · 11 pages

Actively tilting aerial robots can generate six-dimensional wrenches, but slow servo response can make a desired wrench infeasible during reconfiguration. This paper develops a control barrier function (CBF) allocator that preserves wrench feasibility under bounded servo-configuration mismatch. An exact equivalent-wrench identity connects the thrust required at nominal and actual configurations. For a nonsingular six-channel allocation map, inverse allocation reduces robust wrench containment to twelve thrust margins tightened by an ellipsoidal reserve. Their complete derivatives yield a six-variable servo-rate quadratic program, followed by differential thrust allocation for tracking. A conditional forward-invariance result establishes actual-configuration feasibility under reserve coverage, feasible initialization, and admissible CBF inputs. A complementary MuJoCo study evaluates a measured-angle implementation against geometric, augmented differential, and normalized differential allocation in circular and cartwheel maneuvers, with and without disturbances. The proposed implementation achieves lower position error in all four recorded scenarios, with an attitude tradeoff in circular tracking. During the disturbed cartwheel, the desired wrench is feasible at all 1751 stored samples of continuous rotation; baseline violation rates range from 60.8% to 100%. These comparisons evaluate sampled feasibility; validation of the nominal-trajectory certificate requires nominal-state and reserve-coverage records.

0.36

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.60
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.51

Differential Realizability of Static Control Allocation in Multirotors: An Impossibility under Nonredundant Full Actuation and a Pseudoinverse Obstruction under Redundant Actuation

cs.RO eess.SYmath.DGmath.OC ·2026-09-11 ·Antonio Franchi, Mirko Mizzoni
similarity 0.60
Abstract

Control allocation for multirotors with bidirectional propellers is commonly formulated in signed-thrust variables, where the wrench map is linear. The signed-quadratic map from physical rotor speed to thrust, however, is not a local diffeomorphism at zero speed. This work derives two distinct consequences. Under nonredundant full actuation, a single-propeller reversal removes one instantaneous task direction; hence, no global continuously differentiable exact static allocator exists over the complete task space. Under redundant actuation, the physical task map may remain regular, yet a transverse pseudoinverse zero crossing requires an unbounded rotor-speed derivative. We define differential realizability as regularity of the physical lift of an actuator-output section, derive exact and first-order validity conditions, and distinguish structural rank loss from an allocator- induced rate singularity. A local nullspace deformation repairs isolated pseudoinverse reversals, while a global fixed-orthant construction establishes existence of regular sections at the cost of persistent task-preserving internal actuation.

0.21