CS Paper Radar

Efficient Spintronic Stochastic In-Sensor Computing Modules

Abdolah Amirany, HamidReza Imani, Samuel Farid, Tarek El-Ghazawi

cs.ET ·submitted 2026-11-05 21:12 UTC · v2

Abstract

In-sensor processing (ISP) is used in various fields, including autonomous driving automotive systems, wearable healthcare devices, environmental monitoring, wireless sensor networks, smart cities, and industrial control systems. One of the main features of most of these applications is energy and hardware restriction. This restriction amplifies the importance of using high-performance and low-energy consumption computing systems and methods. This paper proposes efficient spintronic stochastic computing modules for in-sensor computing systems to address this challenge. The proposed design utilized the stochastic behavior of the magnetic tunnel junction in the subcritical switching regime to generate a probability-adjustable random stream. Probability-adjustable random stream generation is the most important step in any stochastic system because it determines the quality of the final output. The simulation results indicate that the proposed design offers almost the same peak signal-to-noise ratio and structural similarity while occupying at least 62\% lower area and consuming 60\% lower energy. These advantages made the proposed design a good choice for ISP applications with limited energy.

Closest papers

Nearest neighbours by meaning across the whole index.

FALCON: Fault-Tolerant Magnetic Tunnel Junction-Based In-Memory Stochastic Architecture for Reliability-Critical Edge AI Applications

cs.ET cs.AReess.IV ·2026-09-01 ·Farzad Razi, Mehran Moghadam, Sercan Aygun, M. Hassan Najafi, Marc Riedel
similarity 0.59
Abstract

As modern data-centric applications such as neural inference and sensor-edge analytics expand, they increasingly encounter the von Neumann memory wall, suffering from excessive data movement overhead and stringent energy constraints. In-Memory Computing (IMC) utilizing emerging non-volatile technologies, such as Magnetic Tunnel Junctions (MTJs), promises to mitigate these bottlenecks. However, conventional binary radix-based IMC architectures suffer from excessive vulnerability to process-induced variations, restricted operating margins, and thermal noise. To bridge the gap between energy efficiency and computational reliability, this work proposes FALCON, a fault-tolerant, MTJ-based in-memory arithmetic architecture integrated with Stochastic Computing (SC). By encoding numerical values into uniform bit-streams, SC naturally absorbs localized soft errors and enables the execution of an essential suite of arithmetic operations using highly compact logic primitives directly within the memory arrays. FALCON integrates a deterministic bit mapping mechanism with reconfigurable logic-in-memory (LIM) structures, eliminating the need to transfer data to external processors or area- and power-hungry random number generators. Experimental results using 14 nm FinFET technology validate the correct functionality of FALCON even under aggressive voltage scaling, severe process variation, and noise injection levels up to 30%, making it a robust framework for reliability-critical edge AI applications. We investigate the proper functionality of FALCON on morphological closing as a realistic noise-tolerant image processing case study.

0.36

multi-Stochastic Core Architecture for Scaling Probabilistic Ising Machines

cs.ET cs.AR ·2026-09-06 ·Chirag Garg, Pratik Brahma, Saavan Patel, Sayeef Salahuddin
similarity 0.57
Abstract · 19 pages, 6 figures

Ising Machines offer vast potential to solve NP-hard optimization problems efficiently that are intractable to solve using conventional computing architecture. A lot of these optimization problems fall into statistical learnability and involve finding an optimal solution among many possible, near-analogous configurations, by searching in a non-convex energy landscape. In this context, the probabilistic Boltzmann machine architecture especially PASS (Parallel Asynchronous Stochastic Sampler), explores and models the complex probability landscape pertaining to all possible configurations and excels in finding the ground-state energy solution of these intractable problems. Additionally, the noise-based neuron architecture addresses the limitation of conventional annealing methods, which may get stuck around local minima. Here, we demonstrate a stochastic sampling approach based on Block Gibbs Sampling to integrate multiple asynchronous PASS chips (four in this work), enabling improved scalability. Further, we demonstrate the scaling by mapping 784 nodes Max-Cut problem integrating 256 nodes PASS accelerator manufactured in 14 nm CMOS FinFET technology. PASS-enabled system with Block Gibbs Sampling protocol shows approximately 1000 times speedup for Max-Cut optimization compared to state-of-the-art methods implemented on CPUs and GPUs. The general applicability of this approach is further illustrated by solving a quantum spin chain Transverse Ising system and accurately representing complex probability landscapes. Moreover, our results demonstrate the change in the scaling law to constant in the scaled-PASS accelerator as compared to exponential on GPUs enabling at least 4 orders of magnitude improvement in time-to-solution. Hence, the presented methodology enables the pathway for scaling of asynchronous brain-like dynamics systems that do not follow any clock for its operation.

0.26

Spin Vector Control for Heisenberg-Inspired Probabilistic Computing

cs.ET cond-mat.mes-hall ·2026-08-12 ·Yuanqiu Tan, Rahul Tripathi, Saleh Bunaiyan, Ryan Wagner, Neil Dilley +3 more
published similarity 0.56
Abstract · 37 pages, 11 figures, 1 table

Probabilistic bits (p-bits) have emerged as a cornerstone of probabilistic computing, enabling energy-efficient hardware implementation for probabilistic inference and combinatorial optimization. A critical challenge in advancing this field beyond binary p-bits lies in realizing and manipulating vector spin information, essential for mapping complex energy-based models such as the Heisenberg Hamiltonian.Here, we demonstrate a spintronic platform capable of real-space vector summation by using dual ferromagnetic spin injections into a monolayer graphene channel. By electrically tuning the spin polarization through independently controlled injection currents, we achieve continuous control over the magnitude and direction of the resulting spin accumulation vector. Experimental observations, supported by theoretical vector summation models and spin-circuit simulations, reveal coherent vector interactions and angular tunability of the spin state. This approach enables direct implementation of vector-based spin logic and lays the groundwork for mapping classical Heisenberg models using stochastic low-barrier magnets. Our results establish a scalable pathway for realizing probabilistic spin circuits based on two-dimensional materials, offering new opportunities for low-power, non-Boolean computing architectures.

0.25

Differential Stochastic Simulated Annealing Processor for Fully Connected 2048-Spin Optimization

cs.AR ·2026-09-09 ·Naoya Onizawa, Md Mohaimenul Alam, Sean Smithson, Duckgyu Shin, Takahiro Hanyu
published similarity 0.53
Abstract

A 2,048-spin fully connected annealing processor based on differential stochastic simulated annealing (DSSA) is presented as an architectural design in TSMC 28 nm CMOS with a 3 mm x 4 mm post-layout area. The processor closes timing at 500 MHz, integrates a 16 Mb SRAM weight memory, and amortizes stochastic noise across 16 spins with area-efficient random number generators. DSSA keeps a serialized datapath for density but recomputes interactions only for spins that flip, shrinking the effective workload to the active frontier during each annealing run. Spin-select scheduling, priority-based weight reads, and a temperature controller that skips idle steps accelerate sparse updates without sacrificing full connectivity. Post-layout simulation results show 2.7 ms time-to-solution (TTS) and 0.86 mJ energy-to- solution on 2,000-spin problems at 316 mW (0.15 mW/spin), achieving 1.5x lower power and 3.5x lower TTS energy than projected prior fully connected annealers. These results demonstrate the potential of the proposed DSSA architecture for large-scale combinatorial optimization hardware under post-layout evaluation.

0.32

First hardware demonstration of a continuous-state probabilistic computer with programmable energy-defined sampling

cs.NE cs.ET ·2026-10-22 ·Chao Fang, Hsuan Yao Tu, Yihan He, Xiao Gong, Chin-Fu Nien +1 more
similarity 0.52
Abstract · 22 pages,5 figures

Probabilistic computing has proved useful for combinatorial optimization, but conventional implementations rely on binary stochastic units and sigmoid-based updates. Extending these systems to continuous variables requires binary encoding. Here we introduce a continuous probabilistic computer (CPC) whose continuous probabilistic bits sample bounded states from conditional distributions defined by local energies. Separating random-source generation from conditional sampling provides a route to using physical random sources with different native distributions. A field-programmable gate array (FPGA) prototype updates finite-precision states using digital randomness. The same framework supports product constraints, memory recovery and solution-space exploration. For the tested 7-bit factorization case, fixed-temperature FPGA CPC reduces mean core solving time approximately 33,000-fold relative to the evaluated quadratic unconstrained binary optimization software implementation. The FPGA recovers stored MNIST patterns without pretrained networks, achieving final success rates of 100%. Software CPC reaches 90% reference coverage of the feasible area in approximately 18% of the time required by restarted Adam.

0.31

SEU Hardened Multi-Context Spintronic FPGA

cs.ET ·2026-11-05 ·Abdolah Amirany, HamidReza Imani, Samuel Farid, Tarek El-Ghazawi
benchmark similarity 0.50
Abstract

Due to susceptibility to radiation-induced soft errors and resource constraints implementing large and complex designs on field programmable gate arrays (FPGAs) in harsh environments is challenging. Therefore, to mitigate these issues, this paper proposes an innovative approach through the introduction of a single event upset (SEU)-hardened spintronic FPGA architecture that incorporates multi-context capabilities. Leveraging the non-volatile properties of magnetic tunnel junction (MTJ), the proposed design can store two/four distinct configurations internally, eliminating the dependence on external non-volatile memory which significantly boosts the system performance. Additionally, through post-layout simulation, we demonstrate our design immunity to SEU, which enhances its reliability and operational stability in environments susceptible to radiation-induced soft errors. The efficiency of the proposed design was also evaluated using the ROSSETA benchmark, which serves as a representative model for real-world FPGA applications.

0.24

Stateless Stochastic Computing for Generative AI on Superconducting Logic: A Model-Hardware Co-Design

cs.AR cs.ET ·2026-10-11 ·Mehdi Kamal, Massoud Pedram
similarity 0.50
Abstract

Thermodynamic computing lets stochastic physical dynamics carry out a computation and reads out the result as a time average. Recently, thermodynamic computing has been demonstrated on several hardware platforms, including digital CMOS circuits based on stochastic computing. Superconducting single-flux-quantum (SFQ) logic offers very high clock rates and very low switching energy, but it heavily penalizes state, memory, fan-out, and feedback, i.e., exactly the per-neuron accumulators on which such designs rely. We therefore realize thermodynamic computing in SFQ logic through a co-design of a generative model and its circuit in which the datapath holds no state at all. The model is a class-conditional flow-matching image generator, which transforms Gaussian noise into an image of the requested class along a short, deterministic path of four Euler steps; in hardware, these steps are unrolled into a feed-forward pipeline of stochastic bitstream operators, whose output is read out as a time average, as in thermodynamic computing, without any relaxation phase. Each layer of the model is a butterfly-factorized linear map built exclusively from multiplexers that operate on split-unipolar bitstreams. The ReLU activation, which in stochastic computing requires a per-neuron up/down counter (accounting for 60-70% of the JJs in a counter-based design), is replaced by a stateless AND-NOT gate whose one-clock input skew is provided at no cost by SFQ gate-level pipelining. The models are trained directly on the stream representation of the hardware, with a regularizer that bounds the stream gains. Synthesis with an SFQ design flow shows that stochastic streams tolerate relaxed path balancing, which reduces the Josephson-junction (JJ) count of a hard-wired stage by 40-47%.

0.21

Integrated Hardware Annealing based on Langevin Dynamics for Ising Machines

cs.AR ·2026-08-26 ·Yongchao Liu, Lianlong Sun, Michael Huang, Hui Wu
top venueunusualhighly cited similarity 0.49
Abstract

Ising machines are non-von Neumann machines designed to solve combinatorial optimization problems (COP) by searching for the ground state, or the lowest energy configuration, within the Ising model. However, Ising machines often face the challenges of getting trapped in local minima due to the complex energy landscapes. Hardware annealing algorithms help mitigate this issue by using a probabilistic approach to steer the system toward the ground state. In this paper, we present a hardware annealing algorithm for Ising machines based on Langevin dynamics, a stochastic perturbation by random noise. Theoretical analysis, system-level design, and detailed circuit design are carried out. We evaluate the performance of the algorithm through chip-level simulation using a standard 65-nm CMOS technology to demonstrate the algorithm's efficacy. The results show that the proposed hardware annealing algorithm effectively guides the system to reach the ground state with a probability of 86.5%, significantly improving the solution quality by 97.5%. Further, we compare the algorithm with state-of-the-art hardware annealing methods through behavioral-level simulations, highlighting its improved solution quality alongside a 50% reduction in time-to-solution.

0.69