CS Paper Radar

InstantHMR : Real-Time Human Mesh Recovery on Your Phone

Mohamed Adjel, Kahina Chalabi, Vincent Bonnet

cs.CV ·submitted 2026-11-06 09:17 UTC · v2
code/datahot directionpopular code

Abstract

Real-time 3D human mesh recovery from a single image on mobile devices is a challenging problem with many applications, including robotics, biomechanics, AR/VR, and exergames. Current state-of-the-art models are either too slow to run efficiently on mobile devices or sacrifice accuracy for speed. We present InstantHMR, a family of open-source single-image regressors suited for mobile inference, based on the Momentum Human Rig (MHR) parametric model and trained exclusively on publicly available annotations from the SAM 3D Body dataset. Our approach achieves remarkable performance on a Samsung Galaxy S23 NPU, recovering a 6,890-vertex body mesh in 5.5 ms per person, and 0.98 ms on an NVIDIA RTX 4070 GPU. This speed surpasses all existing methods we evaluated. On mobile, it is 12x faster than the single mobile-compatible method that slightly outperforms ours in accuracy, while achieving competitive accuracy with 40.0 mm PA-MPJPE on 3DPW, 48.8 mm on EMDB and 41.7 mm on RICH. To ensure fair comparisons, we re-evaluate 11 state-of-the-art methods under a unified protocol aligned with the closest MHR-based competitors, including Meta's official MHR-to-SMPL conversion, and report their reproduction results. Additionally, we measure latency across eight different targets, ranging from desktop TensorRT to two phone NPUs. Code and models are available at https://github.com/Naturalpad-studio/InstantHMR.

Closest papers

Nearest neighbours by meaning across the whole index.

Fast and Accurate Body Estimation in Pixels, World Space and Scenes

cs.CV cs.RO ·2026-11-19 ·Jinkun Cao
code/data similarity 0.70
Abstract · 28 pages, 9 pages of main text. 16 figures

We present FAB (Fast and Accurate Body estimation), a human body estimator that jointly improves inference efficiency and body-recovery fidelity. Rather than predicting only parametric mesh-model parameters, FAB directly predicts human skeleton joints and dense surface points. In images, it predicts dense 2D and 3D body points alongside a parametric Momentum Human Rig (MHR) head, then fits SMPL in one learned pass followed by two Gauss-Newton steps. Its ViT-L student, FAB-L, distilled from a fine-tuned SAM 3D Body, runs in real time for one person on an RTX 4070 Ti SUPER, from detection to a fitted body, at 4.6x the speed of SAM 3D Body's eager-PyTorch body-only path, while improving accuracy on most camera-space benchmarks. The same network predicts heel, toe, hand, and knee contacts, which connect the body to the scene. FAB also estimates world-space motion, fuses static-scene depth around the visible person, and aligns body and scene using predicted contacts. For human-to-humanoid real-to-sim transfer, an in-model G1 head and FAB-Retarget, a motion-level retargeter that reads dense points or the fitted mesh, map motion to a Unitree G1. FAB-Retarget produces references that follow the person more closely than specialized retargeters including SOMA, GMR, UMR, and OmniRetarget, and substantially more closely than Fast SAM 3D Body retargeted with our sequence IK. Project page: https://www.jinkuncao.com/FAB.

0.22

PressureMesh: 3D Human Mesh Estimation from Multi-Device Pressure Images

cs.CV ·2026-08-10 ·Changhai Ma, Ziyu Wu, Yunkang Zhang, Fangting Xie, Mengting Niu +6 more
similarity 0.66
Abstract

Human pose monitoring is crucial in fields such as rehabilitation assessment and human-computer interaction. Due to its privacy-preserving nature, pressure-based human pose monitoring has become a primary approach for unobtrusive sensing. However, existing methods are generally limited to a single device, which restricts the effective monitoring range. To address this limitation, we propose MDP-Net, an end-to-end network capable of directly estimating human meshes from temporal pressure data across multiple devices. We introduce a multimodal fusion mechanism inspired by the Mixture of Experts (MoE) framework to achieve effective complementarity and enhancement of cross-device pressure information. To support the training and evaluation of MDP-Net, we constructed MDP, a high-quality multi-device temporal pressure dataset that includes various pose labels such as 2D/3D joints and human meshes. Experimental results demonstrate that MDP-Net achieves a joint position error of 12.6 cm on the MDP dataset. These results prove that fusing multi-device pressure information is an effective and promising new solution for daily human pose monitoring.

0.04

Fast and Accurate Hand Estimation in Pixels, Interaction and World Space

cs.CV cs.RO ·2026-11-05 ·Jinkun Cao
code/data similarity 0.64
Abstract · 10 pages of main text plus 15 pages of supplementary material; 5 figures; 12 tables; code available at https://github.com/noahcao/FAH

Monocular hand mesh estimators commonly predict rig parameters and project the mesh to obtain 2D keypoints. We find that directly predicted 3D joints agree better with 2D predictions, and fitting a mesh to predicted points reduces mesh error. We present FAH (Fast and Accurate Hand Estimation), a family of models built on SAM 3D Body's hand branch through fine-tuning and feature distillation. The models predict corresponding 2D and 3D joints and surface points, fit MANO or MHR-Hand, and optionally estimate anatomical parts and contact without object geometry at inference. Causal refinement reduces acceleration error, and camera estimation places the hands in world space. Experiments show improvements in image-space alignment, hand geometry, contact estimation and world-space tracking over the evaluated baselines. The default ViT-L model runs at 65 fps with mesh fitting on an RTX 4070 Ti SUPER, or 49 fps with parts and contact enabled. The smallest ViT-S model reaches 125 fps without mesh fitting, parts or contact. Code: https://github.com/noahcao/FAH.

0.58

OmniPoser: Flexible Human Motion Recovery in the Wild with Masked Flow Matching

cs.CV ·2026-10-14 ·Minghao Liu, Tutian Tang
top venuecode/data similarity 0.63
Abstract · Accepted as a poster at the European Conference on Computer Vision (ECCV) 2026

Recovering 3D human motion from sparse wearable sensors is challenging due to the inherent noise, occlusion, and instability of real-world tracking signals. Existing approaches are restricted to fixed sensor configurations and, when built on diffusion models, are computationally prohibitive for real-time deployment. We propose OmniPoser, a universal framework that recovers full-body SMPL motion from a flexible combination of heterogeneous inputs, such as 3D keypoints, sparse IMU rotations, head-mounted 6-DoF poses, or any subset thereof, within a single model. OmniPoser introduces a cross-modal masking mechanism paired with a Masked Conditioning Encoder, enabling one architecture to incorporate diverse sensor configurations through a masked design. A decoupled dual-stream generative backbone generates complete motion via Conditional Flow Matching, requiring only a single ODE integration step at inference. Across three settings and seven benchmarks, including in-the-wild Nymeria and Ego-Exo4D datasets, OmniPoser performs on par with state-of-the-art methods while running at over 700 FPS. The project page is available at https://jamesbridgewater51.github.io/omniposer-eccv/.

0.57

One Sensor, Whole Body - 3D Body Pose from a Single Consumer Earbud IMU

cs.CV cs.HC ·2026-09-28 ·Zhilin Guo, Boqiao Zhang, Oszkár Urbán, Josef Bengtson, Hakan Aktas +6 more
benchmarkcode/data similarity 0.63
Abstract · 5 pages, 2 figures, 2 tables. Accepted at the 6th International Workshop on Human-centric Multimedia Analysis (HUMA '26), ACM Multimedia 202…

Consumer earbuds already stream inertial motion data from the head, one of the most widely worn sensor locations on the body. We ask how much of the 3D body pose a single such head IMU can recover, and whether adding more consumer sensors actually helps. We build a multimodal capture pipeline that records four-view RGB-D video together with an AirPods head IMU and two Striv insole IMUs, synchronize the streams post-hoc, and generate pseudo-ground-truth with SAM 3D Body, yielding a 35-take single-subject benchmark spanning gait, turning, vertical, everyday, and clinically inspired motions. Adapting two recurrent model families (IMUPoser and MobilePoser), we show that one head IMU recovers lower-body pose at 79.0 mm rigid-MPJPE and per-foot ground contact at 0.809 macro-F1, and that a causal variant retains most of this accuracy at streaming latency. In paired per-take significance tests across both families, adding the consumer foot IMUs never significantly improves pose and significantly degrades it in two of four model-split combinations; a mounting-bias probe and feet-only ablation identify insole orientation quality, not foot placement, as the mechanism. Extending the output to a 20-joint full-body skeleton maps the boundary: gross distal-arm motion is partially recoverable from the head alone, proximal upper-body pose is not, and staged fine-tuning recovers the leg accuracy that naive joint training sacrifices to multi-task dilution. For learned pose from consumer wearables, sensor reliability, not sensor count, is the binding constraint here. For the devices tested, the earbud is its sweet spot. Code is available at https://github.com/ZhilinGuo/one-sensor-whole-body.

0.62

DreamHMR: From Video Generation to Human Motion Modeling via Structural Focusing

cs.CV cs.AI ·2026-10-14 ·Zhengjie Xu, Ruihao Gong, Xianglong Liu
code/data similarity 0.62
Abstract · 25 pages, 7 figures

Human mesh recovery (HMR) provides a geometric foundation for understanding human motion, but accurately reconstructing both body motion and fine hand articulation from videos remains challenging, especially in real-world scenes where occlusion and partial visibility are common. Video generation pretraining offers rich spatial and temporal priors for this task, but its focus on visual synthesis leaves a gap between these representations and explicit human geometry. We present DreamHMR, a general framework that adapts video generation priors for complete body-and-hand reconstruction. It follows a global-to-local strategy, first grounding video representations in human geometry and then refining body and hand detail with reliable local evidence. Global Body Representation Transfer trains the video backbone to predict complete human renderings, turning its native prediction task into a means of learning surface correspondence and posed geometry. Local Joint Feature Enhancement combines contextual estimates with reliable local evidence to recover fine body and hand detail, while limiting interference from occluders and background. Experiments on five datasets with four video backbones demonstrate strong reconstruction performance across backbone families. Under a unified evaluation protocol, our best model outperforms the best existing methods on all reported metrics of 3DPW, EMDB-1, and RICH, reducing body MPJPE by 4.2%, 4.7%, and 6.1%, respectively. In more challenging occlusion settings on held-out BEDLAM and EgoBody sequences, DreamHMR reduces overall body and hand MPJPE by 7.0% and 10.0%, respectively. Our code will be made publicly available.

0.25

Biomechanical 3D Body: Self-Supervised Distillation of Biomechanical Pose from a 3D Body Foundation Model

cs.CV ·2026-08-30 ·R. James Cotton, J. D. Peiffer, Lucinda Williamson, John Leske, Georgios Pavlakos
publishedcode/data similarity 0.62
Abstract · Accepted to the ECCV 2026 Workshop MoCha

State-of-the-art monocular body recovery methods predict mesh vertices and angles on the corresponding kinematic tree, but their outputs lack biomechanically defined joint angles that downstream applications like clinical and biomechanical analyses require. We extend an existing foundation model, SAM-3D-Body, with an additional biomechanical prediction head that, from a single RGB image, regresses the joint angles and scales of a biomechanical model. Training this model presents a challenge, as there are limited datasets of paired images and biomechanical fits. To overcome this, we supervise biomechanical outputs with in-loop optimized targets from a Levenberg-Marquardt solver performing inverse kinematics fits against markers from the mesh predictions. This allows distilling the biomechanical head from the mesh head, even from unlabeled images. To make this work with GPU-optimized biomechanical models in MuJoCo, the entire model was implemented in JAX using Equinox. We trained this distilled output head on the publicly released SAM-3D-Body dataset. We then validated this model on biomechanical fits to two publicly available marker-based datasets, MoVi and BioCV, as well as movements from a clinical cohort captured with multiview markerless motion capture. The resulting model outperforms existing models for direct regression of biomechanics from images while only slightly underperforming the state-of-the-art monocular biomechanics method that performs more costly inference-time optimization of entire trajectories.

0.51

Smartphone-Aided VR Exergames for HIIT: Gamifying Fitness with Real-Time Pose Estimation

cs.HC cs.AI ·2026-11-04 ·Abhiram Kothagundu, Pheelip Pritipal Raipure, Abhijit Chandrakant Patil, Himangshu Sarma, Christian Eichhorn +2 more
hot direction similarity 0.61
Abstract

This paper introduces an innovative virtual reality (VR) exergame system designed to gamify High-Intensity Interval Training (HIIT) workouts through 11 predefined combo moves, including squat-punch combinations, bilateral arm strikes, and diagonal stretch combos. Unlike conventional tracking methods that often rely on wearable motion capture suits or limited headset-based sensors, our system uses a standard smartphone camera placed on a tripod to capture full-body movement. This approach offers a cost-effective and scalable alternative, particularly well-suited to the fast, dynamic motions typical of HIIT routines. The smartphone footage is processed in real time using a pose estimation algorithm, with extracted biomechanical data analyzed by a backend server built on the Model Context Protocol (MCP), Anthropic's open standard for connecting AI models to structured data sources and tools, and a GPT-4o large language model. The system generates personalized assessments of form accuracy, movement efficiency, exercise intensity, and potential injury risks, tailored specifically to high-impact, time-sensitive exercises. A within-subject study involving 20 participants (ages 18-25) compared experiences in VR and Non-VR HIIT sessions. Results indicated significantly higher enjoyment (Mean = 3.5 vs 2.8, p = 0.02), improved immersion/focus (Mean = 3.2 vs 2.8, p = 0.03), and increased likelihood to recommend (Mean = 3.2 vs 2.7, p = 0.04) under the VR condition. Confidence to continue did not differ significantly between conditions (p = 0.15), while perceived intensity remained comparable. The MCP system showed strong agreement with expert evaluation (87.5%, N = 10 sessions, one certified trainer), supporting its reliability as a feedback tool.

0.29