CS Paper Radar

Smartphone-Aided VR Exergames for HIIT: Gamifying Fitness with Real-Time Pose Estimation

Abhiram Kothagundu, Pheelip Pritipal Raipure, Abhijit Chandrakant Patil, Himangshu Sarma, Christian Eichhorn, David A. Plecher, Johanna Pirker

cs.HC cs.AI ·submitted 2026-11-04 16:18 UTC · v1
hot direction

Abstract

This paper introduces an innovative virtual reality (VR) exergame system designed to gamify High-Intensity Interval Training (HIIT) workouts through 11 predefined combo moves, including squat-punch combinations, bilateral arm strikes, and diagonal stretch combos. Unlike conventional tracking methods that often rely on wearable motion capture suits or limited headset-based sensors, our system uses a standard smartphone camera placed on a tripod to capture full-body movement. This approach offers a cost-effective and scalable alternative, particularly well-suited to the fast, dynamic motions typical of HIIT routines. The smartphone footage is processed in real time using a pose estimation algorithm, with extracted biomechanical data analyzed by a backend server built on the Model Context Protocol (MCP), Anthropic's open standard for connecting AI models to structured data sources and tools, and a GPT-4o large language model. The system generates personalized assessments of form accuracy, movement efficiency, exercise intensity, and potential injury risks, tailored specifically to high-impact, time-sensitive exercises. A within-subject study involving 20 participants (ages 18-25) compared experiences in VR and Non-VR HIIT sessions. Results indicated significantly higher enjoyment (Mean = 3.5 vs 2.8, p = 0.02), improved immersion/focus (Mean = 3.2 vs 2.8, p = 0.03), and increased likelihood to recommend (Mean = 3.2 vs 2.7, p = 0.04) under the VR condition. Confidence to continue did not differ significantly between conditions (p = 0.15), while perceived intensity remained comparable. The MCP system showed strong agreement with expert evaluation (87.5%, N = 10 sessions, one certified trainer), supporting its reliability as a feedback tool.

Closest papers

Nearest neighbours by meaning across the whole index.

Rhythmic Fitness Beat 'Em All using Real-Time Monocular Human Pose Estimation

cs.HC ·2026-11-06 ·Yanis Zaoui, Valentin Bégel, Mohamed Adjel
publishedhot direction similarity 0.74
Abstract

Short and frequent physical activity exercices mitigate the health risks of sedentary behavior. Yet, the lack of motivation remains a critical barrier to adoption. Exergames gamify physical activity, but most rely on dedicated hardware, and outside dance and rhythm games they rarely use the musical beat. We present a work-in-progress beat 'em up exergame played with the whole body in front of a single smartphone, which runs the entire pipeline: an off-the-shelf real-time 3D human mesh recovery model on the phone's neural processing unit, gesture recognition, and the game, shown on any TV through a USB-C to HDMI cable. Our contributions are (1) a 3D recognition of five shadow-boxing moves (guard, punch, slip, squat, jump), each defined by one metric measure in a body frame aligned with gravity and one threshold with hysteresis, personalised during a tutorial; (2) a rhythm stage whose discrete cues are placed on the song's kick drum and judged on the movement's capture time, with a delay learned for each player; and (3) a phone-only architecture, running at 30 frames per second, that turns a phone and an HDMI cable into an exergame console.

0.58

Prosthesis-Aware 3D Human Pose Estimation: A Dataset and Benchmark for RSP Users

cs.CV ·2026-09-16 ·Yilin Wen, Kechuan Dong, Fumiya Suginaka, Ken Endo, Yusuke Sugano
top venuebenchmarkdatasetcode/data similarity 0.65
Abstract · ECCV 2026. Project page: https://ut-vision.github.io/RSP3D/

Recovering 3D human body motion from video is important for applications such as rehabilitation assessment and sports performance evaluation. For prosthesis users, this requires capturing both natural body joints and the geometry of the prosthetic device, a challenge that existing methods are not designed to address. Model-based estimators rely on body models trained on non-amputee individuals and cannot represent prosthesis geometry, while model-free methods lack body kinematic priors and are unreliable under occlusion. This challenge is particularly prominent for users of running-specific prostheses (RSPs), where the RSP has a complex curved geometry and moves dynamically during exercise. To fill this gap, we collect RSP3D, the first 3D dataset of RSP users, covering essential daily-life and exercise actions from participants with varied amputation conditions, using a multi-camera marker-based motion capture setup. We formally define the task of prosthesis-aware 3D pose estimation, evaluate representative methods in a zero-shot setting, and confirm their individual limitations. We further propose a hybrid baseline combining model-based body joint estimation with model-free RSP shape recovery, establishing a starting point for future research.

0.50

SynthGait-19K: A Physically Grounded Synthetic Video Dataset for Gait Parameter Estimation

cs.CV ·2026-09-08 ·Soroush Mehraban, Xin Lei Lin, Vida Adeli, Majid Mirmehdi, Amirhossein Dadashzadeh +3 more
benchmarkcode/data similarity 0.65
Abstract · Project Page: https://soroushmehraban.github.io/SynthGait-19k/

Accurate estimation of clinically meaningful gait parameters from monocular video is important for scalable mobility assessment, yet progress is limited by the small scale, restricted viewpoints, and limited visual diversity of existing datasets. We introduce SynthGait-19k, a physically grounded synthetic video dataset containing 19,272 walking videos derived from 6,427 MoCap sequences across 437 subjects, with paired SMPL motion and annotations for six gait parameters. To construct the dataset, we develop Gait2Vid, which unifies heterogeneous MoCap recordings through SMPL and synthesizes diverse RGB walking videos under controllable viewpoints and scene appearances. We assess the generated videos for consistency with their conditioning gait kinematics and validate extracted gait events against force-platform measurements. Using SynthGait-19K, we benchmark direct RGB, pose-based, biomechanical, and human-mesh-recovery approaches and analyze viewpoint, training-data scale, and synthetic-to-real domain shift. We also introduce GaitXFormer as a direct RGB reference model for estimating gait parameters. Synthetic supervision transfers effectively to real videos across both GaitXFormer and a pose-based architecture, demonstrating utility across different representations. We further find that spatial gait parameters are more sensitive to visual domain shift and that improved HMR reconstruction alone does not necessarily translate to improved downstream gait estimation.

0.34

VideoRun2D Demo: Markerless Body Tracking for Biomechanical Analysis of Running

cs.CV ·2026-08-19 ·Luis F. Gomez, Julian Fierrez, Roberto Daza, Ruben Tolosana, Aythami Morales +3 more
similarity 0.62
Abstract · 5 pages, 4 figures, 2 tables. IEEE/CVF Conf. on Computer Vision and Pattern Recognition Workshops (CVPRW), 2026 (1st PhysHuman Workshop: Phy…

Human pose estimation has advanced significantly due to the development of deep learning models, increased data availability, and improved computing resources. These developments have led to highly accurate body tracking systems with direct applications in sports analysis and performance evaluation. The VideoRun2D Demo performs a biomechanical analysis during sprints using different human pose estimators. The proposed framework was evaluated using human pose trackers and expert manual annotations. The tested framework uses 314 sprints from 44 professional runners, focusing on two key joint angles in sprint biomechanics: 1) hip flexion/extension and 2) knee flexion/extension. The framework also includes a post-processing module for outlier detection. The tested results demonstrate that the average root-mean-square errors range from 11.46° to 5.83° for the best trackers. When integrated with the post-processing modules, these errors can be reduced to 9.87° and 5.30°, respectively. The VideoRun2D Demo findings suggest that human pose-tracking approaches can be valuable resources for the biomechanical analysis of running.

0.19

TapID: Rapid touch interaction in virtual reality using wearable sensing

cs.HC eess.SP ·2026-10-19 ·Manuel Meier, Paul Streli, Andreas Fender, Christian Holz
top venuepositionhighly cited similarity 0.62
Abstract · accepted to IEEE VR 2021

Current Virtual Reality systems typically use cameras to capture user input from controllers or free-hand mid-air interaction. In this paper, we argue that this is a key impediment to productivity scenarios in VR, which require continued interaction over prolonged periods of time---a requirement that controller or free-hand input in mid-air does not satisfy. To address this challenge, we bring rapid touch interaction on surfaces to Virtual Reality---the input modality that users have grown used to on phones and tablets for continued use. We present TapID, a wrist-based inertial sensing system that complements headset-tracked hand poses to trigger input in VR. TapID embeds a pair of inertial sensors in a flexible strap, one at either side of the wrist; from the combination of registered signals, TapID reliably detects surface touch events and, more importantly, identifies the finger used for touch. We evaluated TapID in a series of userstudies on event-detection accuracy (F1 = 0.997) and hand-agnostic finger-identification accuracy (within-user: F1 = 0.93; across users: F1 = 0.91 after 10 refinement taps and F1 = 0.87 without refinement) in a seated table scenario. We conclude with a series of applications that complement hand tracking with touch input and that are uniquely enabled by TapID, including UI control, rapid keyboard typing and piano playing, as well as surface gestures.

0.63

MuyBridge: Mobile Human Center-of-Mass Estimation from Monocular Video via Sparse Fusion

cs.CV ·2026-09-02 ·Aidan Bradshaw, Marco Giordano, David Rode, Andreas Habersack, Elif Basokur +6 more
code/data similarity 0.62
Abstract

The 3D center of mass (CoM) is a primary quantity in the biomechanical analysis of sport, rehabilitation, and clinical movement, yet existing 3D pose tracking, mesh recovery, and multi-view triangulation methods either optimize 3D keypoint accuracy without anatomical constraints or carry compute and capture infrastructure too heavy to deploy where CoM tracking is most useful. As a result, the metric CoM remains difficult for coaches and movement analysts to measure from a single camera where athletes train and compete. In this work, we introduce MuyBridge, an on-device system that estimates the athlete's segmental center of mass trajectory from a single phone camera video stream. MuyBridge couples a compact 2D pose network and a distilled single-step monocular depth network through an analytic metric fusion that uses anatomical and physical priors to anchor the metric CoM, requiring no 3D or task-specific supervision. Evaluated on the athletic movements of AthletePose3D (running, track and field, and figure skating), MuyBridge achieves 33-41 mm vertical CoM error and 2.3-6.6% absolute-relative range error (AbsRel) under a one-time calibration, and produces CoM estimates at the 63 FPS pose-estimation rate using asynchronous 2.86 Hz depth updates on iPhone 15. Code is available at: https://github.com/Abradshaw1/Muybridge

0.34

Impact of Patient Orientation in Single- and Multi-View Camera Environments for AI-based Rehabilitation Monitoring

cs.CV ·2026-09-28 ·Miriama Jánošová, Andreas Lang, Petra Budikova, Jan Sedmidubsky
dataset similarity 0.62
Abstract

Automated quality assessment of rehabilitation exercises relies heavily on accurate human pose estimation from video data. Although numerous RGB-based pose estimation methods have been proposed, the impact of camera placement on detecting clinically relevant movement errors remains insufficiently explored. To address this gap, we introduce REHAB26-ViewAngles, a dataset comprising correct and incorrect rehabilitation exercise executions captured from a wide range of camera angles. Furthermore, we propose a novel separability metric to quantify an algorithm's ability to distinguish between valid and faulty exercise repetitions. Using these tools, we analyze how various RGB-based pose-estimation strategies are suitable for exercise quality assessment under varying camera placements. In particular, we analyze single-camera 2D and 3D pose estimation and four multi-camera strategies: a combination of two orthogonal 2D views, 3D triangulation, weighted 3D fusion, and an AI-based pose-estimation transformer model specifically trained from two synchronized cameras. Our findings reveal that an optimally placed 2D camera can improve the separability by 16.9% over the commonly used 0° frontal view and frequently outperforms single-camera 3D estimation, while combining two views can further improve accuracy by up to 13.1%. These results offer practical guidance for deploying rehabilitation monitoring in both home and clinical settings.

0.09

MuCHMDPoser: Multiview RGB-Camera Full-Body Pose Tracking for Virtual Reality

cs.CV ·2026-11-02 ·Antoine Maiorca, George Fletcher, Thierry Ravet, Thierry Dutoit
code/data similarity 0.62
Abstract

Accurate full-body tracking in Virtual Reality (VR) is heavily underconstrained when relying solely on consumer-grade sparse sensors, such as Head-Mounted Displays (HMDs) and handheld controllers. Indeed, the self-avatar full-body pose must be inferred based on the 3 available upper-body joints tracked by these devices. This leads to significant tracking error, especially in lower-body pose. To overcome this issue, we propose to extend the tracking setup with external multiview RGB cameras. We show that integrating RGB-based pose estimation this framework is able to significantly decrease lower-body tracking errors, even under common artifacts in RGB-based estimates. Additionally, we evaluate a only-once HMD-camera calibration procedure that does not require any physical markers. We finally propose an implementation of the overall framework, achieving an end-to-end animation at 60 FPS on a Nvidia RTX3080 GPU. Codes are available at https://github.com/antmaio/MuCHMDPoser.

0.38