CS Paper Radar

Jointly Optimizing Memory, Computing and Offloading for Energy-Efficient DNN Inference

Yunchu Han, Zhaojun Nan, Sheng Zhou, Zhisheng Niu

cs.LG cs.AI ·submitted 2026-11-08 03:39 UTC · v1
top venue

Abstract

In edge intelligence systems, computation offloading and dynamic voltage and frequency scaling (DVFS) are widely used to improve energy efficiency. However, as applications like deep neural network (DNN) inference evolve in complexity, their demands for memory resources have progressively increased, establishing memory as a critical bottleneck that impacts both latency and energy consumption. In this paper, we propose a joint optimization scheme integrating memory, computing and offloading for energy-efficient DNN inference. We formulate the energy minimization problem under deadline constraints as a mixed-integer nonlinear programming (MINLP) problem, where the main challenge arises from the coupling between offloading and resource optimization. To address this issue, we decompose the original problem into two subproblems under a fixed offloading policy. The local subproblem is transformed into an equivalent geometric programming (GP) problem to derive the optimal memory frequency and computing frequency, while the edge subproblem is solved via convex optimization. An efficient coordinate descent (CD) algorithm is further developed to jointly optimize all variables. Simulation results demonstrate that our proposed algorithm achieves near-optimal performance with the gap from the optimal policy being at most 9.3%, and reduces the energy consumption of devices by up to 16.1% compared with benchmarks without memory frequency optimization.

Closest papers

Nearest neighbours by meaning across the whole index.

Joint Optimization of Memory and Computing Frequency for Energy-Efficient DNN Inference

cs.AI ·2026-08-14 ·Yunchu Han, Zhaojun Nan, Sheng Zhou, Zhisheng Niu
published similarity 0.85
Abstract

Deep neural network (DNN) inference on mobile devices often incurs high latency and energy consumption due to limited computing and memory resources. To enable energy-efficient DNN inference, most existing studies focus on dynamic voltage and frequency scaling (DVFS) for adjusting the computing frequency, while the impact of memory frequency on the inference performance has been greatly overlooked. In this paper, we consider the impact of memory frequency and computing frequency on DNN inference time, and jointly optimize these two frequencies together with communication resources for energy-efficient DNN inference. Based on a realistic inference time model, we formulate an optimization problem to minimize the energy consumption of all mobile devices under the deadline constraint. For local inference, we derive a near-optimal closed-form solution via convex optimization, while an optimal closed-form solution for transmission power is obtained for edge inference with the given bandwidth. Furthermore, we propose a low-complexity heuristic algorithm to effectively solve the overall problem with polynomial time complexity. Simulation results based on measured data show that the proposed near-optimal solution for local inference can achieve optimal performance under strict deadline constraints, with a performance gap of up to 2.5% compared with the optimal solution. Meanwhile, our proposed algorithm significantly reduces the energy consumption of devices by up to 10.4% compared to other methods.

0.17

TADA: Technology Aware DNN Accelerator Performance and Energy Estimator

cs.AR cs.AI ·2026-10-30 ·Tanvi Sharma, Surya Selvam, Anand Raghunathan, Kaushik Roy
published similarity 0.66
Abstract · 7 pages, 7 figures. Accepted at the 32nd Asia and South Pacific Design Automation Conference (ASPDAC '27), Tokyo, Japan, 2027

Deep neural network (DNN) accelerators for edge inference must meet tight energy, latency, and area (EDP) constraints, and their optimal hardware architecture and dataflow configuration is typically identified through design space exploration (DSE). However, on-chip memory technology including cell type, bank organization, and process node, is rarely treated as a first-class citizen in DSE. For example, increasing memory capacity can reduce memory accesses through greater data reuse, but at the cost of higher area and access energy, thereby limiting the compute units budget. Consequently, memory technology can fundamentally shift the optimal accelerator architecture for a given area and EDP budget. Existing machine learning (ML)-based DSE methods require repeating simulation, data generation, and model training for each new memory technology. We present TADA, a memory technology-aware DNN accelerator performance and energy estimator that predicts system latency and energy for a given workload, hardware configuration, and memory technology. TADA is trained on a synthetic dataset that generalizes across memory technologies. The dataset spans current and future technology trends while enforcing physics-based guardrails to preserve realistic area-energy trade-offs. Each memory technology is represented by a technology signature, a vector of read energy, write energy, and storage capacity across a range of areas, provided as input alongside the workload and hardware configuration. Across 21 unseen technology curves spanning SRAM, STTRAM, ReRAM, PCM, FeFET, eDRAM, and CTT, TADA predicts system energy and latency with 1.5-4.4% and 0.7-1.2% mean absolute percentage error, respectively. In three pairwise case studies, it matches the simulator-selected memory technology at 98.7-100% of area budgets, with a mean EDP loss of at most 0.21%, while achieving over 10^4x higher evaluation throughput.

0.38

IA-MoE: An Intensity-Aware Mixture of Experts for DNN Inference

cs.DC ·2026-11-14 ·Meiyan Zeng, Sasu Tarkoma, Xiaoli Liu
published similarity 0.66
Abstract · Extended version of the IEEE ICNSC 2025 paper, with a revised training objective, additional baselines, expanded experimental evaluation, ab…

In edge-cloud collaborative inference, the layers of a deep neural network (DNN) are placed on edge and cloud virtual machines (VMs) for every request, while the edge load and the cross-cloud bandwidth change over time. We propose IA-MoE, an intensity-aware Mixture of Experts (MoE) framework that scores each layer-VM pair by end-to-end delay and energy and places the layers one at a time on the best-scoring VM. Such greedy placement is myopic when trained on per-layer labels: offloading to the cloud slows the first offloaded layer while the gain appears only in later layers, so the policy keeps too many requests at the edge. Training on the remaining request time after each decision removes this myopia and reduces the mean delay by 12-56% on congested workloads. In CloudSimSDN simulations with three DNNs and two public request traces, IA-MoE has the lowest mean delay of all compared methods on congested VGG16 workloads, across cross-cloud bandwidths of 150-600 Mbps, fluctuating bandwidth and saturated edge servers. A random forest trained on the same label is 5-27% slower, and only a heuristic that sends whole requests to the cloud uses less energy, at up to 20 times the delay. When the edge is lightly loaded, offloading does not pay and simple heuristics perform as well. IA-MoE also beats a Double Deep Q-Network (DQN) agent with the same features in all 19 tested settings, with a mean delay lower by a factor of 1.3 to 10.5, and trains in minutes instead of hours.

0.49

Throughput Maximization for MapReduce-Based Collaborative Computing over Energy-Harvesting Wireless Devices

eess.SY cs.DC ·2026-08-26 ·Yuhang Li, Siqi Sun, Hongen Zheng, Xiaojing Chen, Shunqing Zhang +1 more
published similarity 0.65
Abstract

This paper studies resource allocation for MapReduce-based collaborative computing over heterogeneous wireless devices powered by renewable energy harvesting. We formulate a long-run average throughput maximization problem that jointly optimizes computing load, phase time allocations, transmit power, and per-device energy consumption, subject to battery evolution, CPU frequency, and latency constraints. To solve this problem online without prior knowledge of channel states or energy arrivals, we propose a DDPG-CVX algorithm that couples Deep Deterministic Policy Gradient (DDPG) with convex programming. DDPG determines the per-slot energy budget for each device from observed battery and channel states; the remaining resource allocation variables are then resolved to global optimality by an embedded convex solver. This two-phase decomposition reduces the action-space dimensionality of DDPG while preserving per-slot solution quality. Simulations show that DDPG-CVX achieves 1.25$\times$$\sim$32.36$\times$ the throughput of representative benchmarks.

0.24

Adapting DNNs to Embrace Voltage Scaling Induced Errors via Accumulation-Aware Quantization

cs.AR cs.AI ·2026-10-24 ·Alexis Maras, Panagiotis Chaidos, Georgios Alexandris, Dimitrios Soudris, Sotirios Xydis
published similarity 0.63
Abstract · Accepted for publication at the 45rd International Conference on Computer-Aided Design (ICCAD '26), November 08-12, 2026, San Jose, CA, USA

The pervasive deployment of Deep Neural Networks (DNNs) across the computing spectrum has brought growing attention to energy efficiency, alongside raw performance. While voltage scaling is a potent knob for power reduction, its application in next-generation nodes is hampered by severe throughput degradation and susceptibility to process variation. This work aims to address these energy-reliability trade-offs by introducing a hardware-software co-design methodology, based on the observation that timing-robust bit ranges within the accumulator of a systolic array vary significantly across different voltage-frequency operating points. At the software level, we propose an Accumulation-Aware Training approach that incorporates this information as a first-order optimization constraint during training. By integrating mixed-precision quantization with unstructured pruning, we effectively constrain the model's weight distribution to avoid activating the hardware's sensitized high-rank carry chains. At the architectural level, we complement this with selective MSB-masking and fine-grained clock-gating to minimize unnecessary dynamic switching activity. Furthermore, we employ a layer-wise Dynamic Frequency Scaling strategy to further adapt to the accumulator's reduced dynamic range, based on the numerical sensitivity of each layer. We experimentally evaluate the proposed solution on a deep scaled 2nm technology node and demonstrate that, when operating at a low-voltage frontier, our co-optimized post-layout architecture delivers substantial energy and energy-delay product gains of 39% and 23% respectively, relative to the nominal voltage implementation, while maintaining accuracy degradation within 1%.

0.33

B$^3$-PWL: GPU-Batched Branch-and-Bound for Piecewise-Linear Optimization with SOS2 Constraints

cs.DC math.OC ·2026-08-29 ·Yilin Guan, Shuqing Luo, Pingzhi Li, Tianlong Chen, Kaidi Xu
benchmarkcode/datahot direction similarity 0.63
Abstract · 23 pages, 3 figures

Piecewise-linear (PWL) optimization problems arise in many mixed-integer programming (MIP) optimization applications, including portfolio optimization, workforce scheduling, and resource allocation. But solving them to global optimality remains computationally expensive because branch-and-bound repeatedly solves LP relaxation subproblems. Existing solvers are largely CPU-centric, leaving the scalability of modern GPUs underutilized. Few prior GPU-accelerated branch-and-bound either targets neural network which is not suitable for general PWL optimization, or accelerates only auxiliary subroutines such as strong branching heuristics within CPU-centric MIP solvers. To bridge this gap, we propose B$^3$-PWL, a GPU-centric batched branch-and-bound framework for piecewise-linear optimization with Special Ordered Set of type 2 (SOS2) constraints. Our method solves batches of LP relaxation subproblems concurrently on the GPU using a first-order primal-dual solver, enabled by a specialized batched block-tiled sparse matrix kernel. To complement bound computation, we further introduce a unified feasibility search module that combines an SOS2 repair primal heuristic with a batched feasibility pump to rapidly obtain feasible incumbents and improve pruning efficiency. On a benchmark of 43 PWL-MIP instances, B$^3$-PWL achieves a 9.25x geometric-mean speedup over NVIDIA cuOpt while reaching high-quality feasible incumbents on every tested instance. On a public valve-point unit-commitment benchmark, it further outperforms NVIDIA cuOpt and the open-source CPU solvers SCIP and HiGHS, demonstrating the potential of first-order LP methods as the central engine of GPU-accelerated branch-and-bound.

0.42

EcoVLA: Energy-Efficient Device-Edge Co-Inference for Vision-Language-Action Models under Real-Time Constraints

cs.AI cs.RO ·2026-08-16 ·Ao Zhou, Bo Dai, Le Yu, Xingyu Liu, Zeyu Hao +3 more
published similarity 0.63
Abstract · Accepted by APPT 2026

Vision-Language-Action (VLA) models have emerged as a promising foundation for Embodied AI, but their high inference cost poses significant challenges for deployment in robotic systems. In practice, on-device inference is constrained by limited compute capacity and energy budgets, struggling to simultaneously satisfy real-time control and energy efficiency requirements. Alternatively, offloading the inference workload to an edge server is susceptible to fluctuations in system conditions, introducing unpredictable latency risks. Device-edge co-inference offers a promising solution, but systematic research tailored to VLA models remains scarce, particularly a unified co-inference framework that jointly addresses real-time constraints and system-level energy efficiency. Thus, we propose EcoVLA, an adaptive device-edge co-inference framework for VLA models that maximizes system energy efficiency under real-time constraints. EcoVLA first introduces a unified stage-level abstraction over different VLA paradigms, establishing an architecture-agnostic co-inference design space. It then formulates a joint device-edge-network latency and energy prediction model to enable rapid runtime evaluation of candidate co-inference schemes. Building on this, EcoVLA continuously selects the energy-optimal scheme satisfying real-time constraints with millisecond-level overhead, adapting to runtime variations in network and system states. Furthermore, EcoVLA incorporates a lightweight transmission mechanism for inter-stage intermediate tensors to reduce the communication overhead incurred by cross-device collaboration. Experimental results across VLA models show that EcoVLA improves system energy efficiency by up to 236% over existing co-inference approaches under a 20 Hz action output frequency constraint, while consistently maintaining SLO satisfaction under dynamic network and edge workload conditions.

0.56

DS-Net: A Dynamic Split Network for Edge-Cloud Collaborative Inference

cs.LG cs.CV ·2026-10-09 ·Xinyun Zhang, Li Wang, Lei Jin, Lianming Xu, Zhu Han
similarity 0.63
Abstract · 18 pages. Submitted to IEEE Transactions on Mobile Computing

Collaborative inference serves as a critical methodology in edge intelligence. Existing collaborative inference methods operate by splitting the deep neural network (DNN) model between edge devices and cloud servers. However, these methods need to load different models for multiple split points when the communication or device changes, thus resulting in long switching times and substantial storage overhead on the edge side. To address this issue, we propose a Dynamic Split Network (DS-Net), which not only enables efficient split point switching but also enhances the collaborative speed and accuracy across various scenarios. Specifically, we design a dynamic switching framework that enables flexible selection among multiple split points within a single model, thereby reducing storage, memory, and switching overhead. To mitigate the feature distribution shifts and task-relevant information loss caused by dynamic splitting and high-ratio compression, we further propose a hierarchical compensation mechanism. Local alignment calibrates the decoded feature distribution at each split point, while task-specific global compensation restores task-relevant information at the global level. In addition, we incorporate sample-adaptive global compensation selection into split-point selection based on sample complexity and runtime resource conditions. Experimental results demonstrate that DS-Net reduces memory overhead by 74.6% and achieves millisecond-level switching latency. Moreover, under a 10 Mbps bandwidth constraint on the Nano platform, DS-Net outperforms state-of-the-art collaborative methods by achieving 1.2% higher accuracy on the COCO dataset, reducing latency by 42.5%, and improving throughput by a factor of 1.8$\times$.

0.29