CS Paper Radar

Nonlinear Interference Estimation in Coherent Optical Systems: Principles and Applications

Dario Pilori

eess.SP ·submitted 2026-11-08 08:33 UTC · v1

Abstract

Accurate estimation of nonlinear interference (NLI) is important for monitoring and optimizing coherent optical networks. This invited paper reviews the main techniques proposed for receiver-side NLI estimation, with particular focus on longitudinal power monitoring (LPM). We discuss the principles, advantages and limitations of LPM-based NLI estimation, including recent experimental demonstrations. We then experimentally investigate the impact of the spatial step size and the number of averaged constellation blocks on estimation accuracy. The results show that accurate NLI estimation does not necessarily require a highly accurate power profile, with limited improvements obtained by increasing the number of averaged blocks. Finally, we discuss the main practical limitations and applications of NLI estimation, with particular attention to end-to-end and span-wise optical power optimization.

Comment
10 pages, 7 figures. Extended version of an invited talk at ECOC 2026. Submitted to the Journal of Lightwave Technology

Closest papers

Nearest neighbours by meaning across the whole index.

Capacity Bounds for Optical Interference Channels Subject to Average Power Constraints

cs.IT ·2026-10-14 ·Viswanathan Ramachandran
similarity 0.59
Abstract

Accurate information-theoretic analysis of multiuser wavelength-division multiplexed (WDM) optical links is complicated by Kerr nonlinearity and chromatic dispersion. Existing capacity bounds for first-order regular perturbative (RP) channel models have relied on per-symbol peak power constraints to simplify the underlying extremal analysis. In this paper, we replace these peak constraints with the more practically relevant average input power constraints and study the resulting RP WDM interference channel. Unlike the peak-constrained formulation, an exact finite signal-to-noise ratio (SNR) analysis under average power leads in general to a nonconvex, high-dimensional optimization problem with no closed-form solution. We show that the problem admits a tractable characterization in the high-SNR regime. Using a genie-aided argument, we derive closed-form single-user high-SNR capacity bounds for the RP interference channel and identify constant-amplitude interferer signaling as extremal. Furthermore, under an empirically validated non-negativity condition on the dominant RP kernels and within a truncated first-order RP model, we establish a finite-SNR extremality result, yielding a single-user capacity characterization within the RP model under average power constraints. Building on these single-user corner points, we construct an all-helpsone achievable region via time sharing, which strictly improves upon treating nonlinear interference as noise. Numerical results and split-step Fourier simulations of the nonlinear Schrodinger equation channel confirm that the qualitative conclusions persist over practical launch powers. The results provide new insight into extremal signaling and multiuser trade-offs for nonlinear WDM systems within the RP approximation.

0.26

An Efficient Correlation-based Evaluation of the GN-Model for General Multi-Span Optical Systems

eess.SP ·2026-10-08 ·Y. Jiang, Y. Gao, P. Poggiolini
similarity 0.58
Abstract · The paper is identical to a manuscript submitted to JLT in October 2026

Accurate and computationally efficient evaluation of non-linear interference (NLI) remains challenging in multi-band WDM systems comprising heterogeneous spans and nonidentical channels. In such systems, channels may have distinct spatial power profiles and multi-subcarrier structures. Spans may use different fiber types with span-dependent dispersion and loss profiles. These systems may further employ general amplification schemes, including forward and backward Raman amplification. Inter-channel stimulated Raman scattering and multiple lumped gain or loss elements may also be present. In this encompassing framework, we provide an efficient decomposition of the GN-model NLI contributions. We show that the NLI power spectral density at any frequency across the WDM comb is fundamentally driven by the spatial auto- and cross-correlations of the channels' spatial power profiles or, equivalently, by the corresponding energy spectra. For this reason we call this formalism the `correlation GN-model', or cGN. Once these correlations or spectra have been computed, the remaining calculations reduces to a fast, well-behaved one-dimensional numerical integral. Moreover, cGN fully accounts for coherent interference of NLI in every pair of spans. Such coherence is often neglected or approximated in existing analytical and semi-analytical GN-model formulations, although it can increase the NLI by several dB. In short, the cGN framework applies to any general systems over any band and any bandwidth, with very high computational efficiency. It is capable of providing the frequency spectrum of NLI at multiple frequencies across each channel or subcarrier. Its accuracy is very high because virtually no approximations are invoked. The cGN framework is available as freely downloadable software from the European Union Zenodo website.

0.25

Distributed Fiber Monitoring on a Coherent DSP ASIC: Implementation of Longitudinal Power Monitoring

eess.SP physics.optics ·2026-11-19 ·Takeo Sasai, Yukinobu Nakajima, Minami Takahashi, Runa Kaneko, Masanori Nakamura +3 more
similarity 0.57
Abstract · 11 pages, 19 figures

Coherent DSP ASICs and transceivers to date report a rich set of optical link metrics, yet these remain cumulative over the link and provide no spatial localization. This paper presents the implementation design of fiber-longitudinal power monitoring (LPM), which recovers spatially resolved power profiles from received traffic, on a coherent DSP ASIC chip. We first identify the challenges specific to DSP implementation, and describe the enabling algorithm and architecture. We then present the key design considerations for retaining the estimation fidelity of the on-chip LPM during in-service operation. On this basis, we implement LPM on a coherent DSP, a 3-nm 800G low-power DSP ASIC housed in an OSFP pluggable module, which constitutes, to our knowledge, the first coherent DSP ASIC and transceiver to perform distributed fiber monitoring and data communication simultaneously. The on-chip LPM is experimentally validated over links of up to 1005 km using 400ZR+ and 800ZR+ traffic, with no measurable impact on Q factor or module power consumption. Multi-vendor interoperability is also demonstrated, where the on-chip LPM operates on signals transmitted by third-party transceivers. These results extend coherent DSPs from cumulative to spatially resolved monitoring, allowing pluggable transceivers, deployable from DCI to long-haul, to act not only as cost-efficient transmission elements but also as distributed monitoring points across diverse optical network infrastructure.

0.31

Integrated Optical Receiver for Communication and Fine Tracking in Inter-Satellite Links

eess.SP ·2026-09-22 ·Meysam Ghanbari, Mohammad Taghi Dabiri, Akram Alomainy, Qammer H. Abbasi, Mazen O. Hasna +1 more
benchmark similarity 0.55
Abstract

Inter-satellite optical links demand high-precision fine tracking while preserving sufficient received power for data communication, yet these functions are often treated separately at the receiver. This paper proposes a dual-function optical receiver that integrates data reception and fine tracking on a shared, intentionally defocused receiver plane. The architecture combines a central data lens with an annular four-segment tracking detector, creating a fundamental tradeoff between datapower collection and angular-estimation capability. A scalar Fresnel wave-optical model is developed together with nonlinear two-dimensional calibration and a noise-aware worstcase angular-accuracy framework. The receiver geometry is then jointly optimized to maximize the guaranteed fine-tracking range subject to a minimum data-power constraint. Results demonstrate that appropriate co-design of the central aperture and defocus substantially enlarges the usable fine-tracking region while maintaining the required communication-path power. The proposed framework provides a receiver-level benchmark for analyzing and designing integrated communication-and-tracking architectures in future optical inter-satellite terminals.

0.23

Blind Interference Suppression in IRS-Aided Wireless Systems: A Statistical Channel Ratio Estimation Approach

eess.SP ·2026-09-30 ·Tao Wang, Xiaohui Zhang, Hehe Ban, Pengfei Lv, Yiwei Guo +1 more
theory similarity 0.51
Abstract · 13 pages, 6 figures, submitted to IEEE Internet of Things Journal

This paper addresses the problem of suppressing non-cooperative interference in intelligent reflecting surface (IRS)-aided wireless links without any channel state information (CSI) or cooperation from the interferer. We propose a fully blind framework that relies solely on received signal power measurements. A key insight is that nulling the aggregate interference channel requires only the complex ratios between the IRS-reflected paths and the direct interference link, rather than absolute CSI. We develop a novel estimation algorithm that obtains unbiased estimates of these channel ratios using only power samples collected under random IRS configurations. Theoretically, we prove that unbiased estimation is feasible when the number of discrete phase levels $K\geq 3$, and establish the Cramer-Rao lower bounds (CRLBs) for both the phase offset and amplitude ratio estimates, thus providing design guidance. Based on the estimated ratios, we propose two low-complexity IRS phase optimization algorithms: a one-shot greedy method and an iterative variant that mitigates error propagation from weakly reflecting elements. Simulations demonstrate that the proposed schemes can suppress strong interference to within a few dB of the interference-free upper bound, offering a practical, CSI-free solution for robust wireless communications in contested spectral environments.

0.30

Impact of PA Nonlinearities on AFDM Sensing: A Matched Filtering Perspective

eess.SP ·2026-09-12 ·Eya Gourar, Yahia Medjahdi, Laurent Clavier, Abdul Karim Gizzini, Patrick Sondi
published similarity 0.51
Abstract · The manuscript was previously deposited in HAL (hal-05573928). Accepted for presentation at the 2026 IEEE International Conference on Integr…

Affine Frequency Division Multiplexing (AFDM) is a promising waveform for integrated sensing and communications (ISAC) due to its Doppler resilience. However, such waveforms exhibit a high peak-to-average power ratio (PAPR), and they require highly linear Power Amplifiers (PAs), which conflicts with ISAC requirements, where high transmit power for sensing is always beneficial. This paper investigates the impact of PA nonlinearities on the sensing performance of AFDM. Using the Bussgang decomposition of the nonlinearly amplified AFDM signal, we analyze the delay-Doppler ambiguity function for the sensing matched filtering and show that AFDM's sidelobes remain nearly unaffected. Simulation results confirm that AFDM outperforms OFDM in target detection under high Doppler and nonlinear amplification, highlighting its suitability for the sensing task.

0.41

Over-the-Air Computation with Power Amplifier Nonlinearity

eess.SP ·2026-10-21 ·David Nordlund, Ayça Özçelikkale, Zheng Chen
similarity 0.49
Abstract · 6 pages, 3 figures

Over-the-air computation (AirComp) enables efficient wireless data aggregation by exploiting the superposition of signals transmitted by multiple source nodes, but its performance is sensitive to hardware impairments such as power amplifier (PA) nonlinearity. In this paper, we develop an analytical framework for coherent AirComp with PA nonlinearities and derive a closed-form expression for the receiver mean-squared error (MSE) under a memoryless polynomial PA model. Our numerical results show that power control optimized under the conventional linear-PA assumption can exhibit rapidly increasing MSE as the transmit power budget increases, whereas incorporating PA nonlinearity into the power control design prevents this degradation and maintains low MSE over the considered power range.

0.33

LMMSE-Based Phase Estimator for Fiber-Optic Coherent Spread-Spectrum FBG-Based Sensing Systems

eess.SP ·2026-09-19 ·Yiyang Bai, Élie Awwad, Michèle Wigger
publishedtheory similarity 0.48
Abstract

Fiber Bragg grating (FBG)-based sensing enables localized strain and temperature monitoring by tracking the phase changes of the light reflected from FBGs inserted along a fiber. A major source of disturbance in such systems is laser phase noise, and its influence is typically mitigated by means of additional hardware. In this article, we propose to mitigate the influence of laser phase noise by means of digital signal processing. We propose a practical estimator for coherent single-polarization spread-spectrum FBG-based sensing systems, which is motivated by linearizing the complex received signal and approximating the loss function to formulate a minimum mean square error (MMSE) estimation problem. Moreover, a Cramer-Rao lower bound for this FBG-based estimation problem is presented. Our simulation results demonstrate that the performance of our proposed estimator lies close to the Cramer-Rao lower bound, thus indicating that our estimator effectively compensates for phase noise in FBG-based sensing systems.

0.36