CS Paper Radar

LMMSE-Based Phase Estimator for Fiber-Optic Coherent Spread-Spectrum FBG-Based Sensing Systems

Yiyang Bai, Élie Awwad, Michèle Wigger

eess.SP ·submitted 2026-09-19 19:52 UTC · v1
publishedtheory

Abstract

Fiber Bragg grating (FBG)-based sensing enables localized strain and temperature monitoring by tracking the phase changes of the light reflected from FBGs inserted along a fiber. A major source of disturbance in such systems is laser phase noise, and its influence is typically mitigated by means of additional hardware. In this article, we propose to mitigate the influence of laser phase noise by means of digital signal processing. We propose a practical estimator for coherent single-polarization spread-spectrum FBG-based sensing systems, which is motivated by linearizing the complex received signal and approximating the loss function to formulate a minimum mean square error (MMSE) estimation problem. Moreover, a Cramer-Rao lower bound for this FBG-based estimation problem is presented. Our simulation results demonstrate that the performance of our proposed estimator lies close to the Cramer-Rao lower bound, thus indicating that our estimator effectively compensates for phase noise in FBG-based sensing systems.

DOI
10.1109/JPHOT.2026.3734836

Closest papers

Nearest neighbours by meaning across the whole index.

Covariance-Weighted Spectral Delay Fusion With a One-Dimensional Affine Model for High-Precision Distributed Optical-Fiber Sensing

eess.SP ·2026-09-15 ·Zhiyang Xue, Huan Huang, Ziang Chen, Zhongxing Tian, Zeyu Feng +5 more
unusual similarity 0.55
Abstract · The manuscript has been submitted for possible publication

Periodic disturbances can produce ambiguous delay estimates, limiting reliable high-precision localization in distributed optical-fiber sensing. We develop spectral delay fusion for a sensing system using a dual-wavelength bidirectional Mach-Zehnder interferometer, with four phase traces recovered by heterodyne detection and digital demodulation. With calibrated propagation parameters and timing offsets fixed, the six pairwise delay predictions form a one-dimensional affine line segment parameterized by the position of a single dominant disturbance, with sensitivities determined by propagation direction and chromatic dispersion. A generalized least-squares estimator combines unwrapped delays from robust cross-spectral phase slopes with wrapped delays from polarity-invariant phase alignment to jointly estimate position and integer ambiguities under the proposed model, using an effective joint covariance to account for shared-channel and cross-representation dependence. Experiments use a 131.335-km sensing fiber at 1530 and 1550 nm, with periodic phase perturbations applied at five nominal positions from 25 to 125 km. Across the reported groups of 20 records, the proposed method yields sample standard deviations of 1.007-1.685 m at a drive voltage of 500 mV and 0.449-1.324 m at 1 V. The ratio of the smallest single-pair sample standard deviation to that of the proposed method ranges from 2.57 to 19.56 at 500 mV and from 2.12 to 2900 at 1 V. The upper ratio reflects unstable single-pair phase-slope delay estimates for periodic disturbances in the 1-V, nominal 50-km group, where the proposed covariance-weighted fusion maintains meter-scale localization repeatability.

0.27

Quantum Communication and Phase Sensing over a Dephasing Channel with Thermal Noise

cs.IT ·2026-11-05 ·Nikos A. Mitsiou, Ioannis Krikidis
similarity 0.51
Abstract

Dephasing is a prominent source of decoherence in quantum communication, degrading phase coherence and transmission reliability. Therefore, knowledge of the physical channel parameters for reliable transmission is imperative, motivating the integration of quantum communication and sensing at the physical layer. Consequently, we study the transmission of coherent states over a von Mises dephasing channel affected by thermal noise. We consider a heterodyne receiver, for which, we first derive the symbol-error probability (SEP) and an accurate closed-form approximation, through which an irreducible asymptotic error floor due to the dephasing channel is identified. We note that the derived SEP is affected by the mismatch between the receiver's mean phase estimation and the true mean phase, thereby formalizing the interplay between sensing accuracy and communication reliability. In addition, we derive the Fisher information (FI) for the mean phase acquisition of the channel and provide closed-form lower and upper FI bounds. Moreover, the quantum FI (QFI) of the channel is studied, and lower and upper bounds on the QFI are given, which become asymptotically tight as the photon number increases. Despite the initial complexity of the FI and the QFI, the bounds given are relatively simple and effective. In addition, by comparing the FI with the QFI, we show that heterodyne detection approaches the quantum sensing limit as the number of photons increase, while an unavoidable sensing floor exists due to dephasing. Then, using the SEP and the FI analysis, we discuss the conditions under which communication and phase estimation requirements are jointly feasible. Finally, numerical results validate the derived SEP, estimation bounds, and the sensing-communication feasibility tradeoff.

0.31

Sensing-Assisted OFDM with Index Modulation: A Waveform for Optical Wireless Integrated Communication and Localisation

eess.SP ·2026-10-15 ·Ali Waqar Azim, Mohamed Sufyan Islim, Muhammad Ali Imran, Harald Hass, Hanaa Abumarshoud
similarity 0.49
Abstract

This paper proposes sensing-assisted OFDM with index modulation (SA-OFDM-IM) for joint communication and localisation over optical wireless systems. In SA-OFDM-IM, a multilayer frequency-domain architecture partitions each layer's admissible subcarriers into disjoint communication and distributed sensing-pilot subsets, applying group-wise index modulation (IM) within the communication subset. A constrained sensing-to-communication energy allocation jointly minimises average bit-error rate (BER) and delay-based localisation root mean square error (RMSE) under a minimum power-domain margin, enabling low-complexity, ordered-energy detection of both sensing and communication subcarriers without exhaustive maximum-likelihood search. Sensing tones are aggregated across the frame to reconstruct the channel frequency response, yielding the line-of-sight (LoS) delay tap and phase-compensated LoS gain for multilateration and, via the proposed delay-aided received signal strength (RSS) refinement. Simulation results indicate that SA-OFDM-IM can achieve up to 5 dB lower SNR requirement in BER and up to three orders of magnitude lower channel-estimation error than DC-biased optical OFDM, while the RSS estimator removes the SNR-independent error floors of delay-only and hybrid-RSS benchmarks to attain sub-delay-bin range and position accuracy, remaining robust under random known and unknown receiver orientations.

0.22

Nonlinear Interference Estimation in Coherent Optical Systems: Principles and Applications

eess.SP ·2026-11-08 ·Dario Pilori
similarity 0.48
Abstract · 10 pages, 7 figures. Extended version of an invited talk at ECOC 2026. Submitted to the Journal of Lightwave Technology

Accurate estimation of nonlinear interference (NLI) is important for monitoring and optimizing coherent optical networks. This invited paper reviews the main techniques proposed for receiver-side NLI estimation, with particular focus on longitudinal power monitoring (LPM). We discuss the principles, advantages and limitations of LPM-based NLI estimation, including recent experimental demonstrations. We then experimentally investigate the impact of the spatial step size and the number of averaged constellation blocks on estimation accuracy. The results show that accurate NLI estimation does not necessarily require a highly accurate power profile, with limited improvements obtained by increasing the number of averaged blocks. Finally, we discuss the main practical limitations and applications of NLI estimation, with particular attention to end-to-end and span-wise optical power optimization.

0.31

Statistical Inference-Based Channel Estimation for LD-Driven Visible Light O-OFDM Systems in the Presence of Relative Intensity and Input-Signal-Dependent Shot Noise

eess.SP ·2026-09-14 ·Shubham Saxena, Karra Sreeman Reddy, Suraj Srivastava, Subrahmanya Swamy Peruru, Aditya K. Jagannatham +1 more
benchmarktheory similarity 0.47
Abstract

Laser diode (LD)-based luminaires are gaining increasing attention in automotive applications and are expected to extend to residential and commercial environments, creating opportunities for high-bandwidth visible light communication (VLC) systems. However, practical LD-based VLC links are impaired by input-signal-dependent shot noise (ISDSN), relative intensity noise (RIN), and thermal noise, which affect reliable channel estimation (CE). This work investigates their joint impact on receiver-side CE in a single-input single-output (SISO) optical orthogonal frequency division multiplexing (OOFDM) VLC system under a statistically random channel model. A statistical inference framework is developed in which the receiver exploits observed signal variations to estimate the channel under optical impairments. Closed-form expressions are derived for least squares (LS), maximum likelihood (ML), maximum a posteriori probability (MAP), minimum mean square error (MMSE), and linear MMSE (LMMSE) estimators. In addition, the Bayesian Cramer-Rao lower bound (BCRLB) is derived to benchmark mean square error (MSE) performance. Monte Carlo simulations for direct current-biased O-OFDM (DCO-OFDM) and asymmetrically clipped O-OFDM (ACO-OFDM) validate the analysis. Results show substantial CE degradation under the joint presence of ISDSN and RIN, while the MMSE estimator consistently achieves the lowest MSE, demonstrating strong potential for robust and adaptive receiver operation in practical VLC systems.

0.37

Integrated Optical Receiver for Communication and Fine Tracking in Inter-Satellite Links

eess.SP ·2026-09-22 ·Meysam Ghanbari, Mohammad Taghi Dabiri, Akram Alomainy, Qammer H. Abbasi, Mazen O. Hasna +1 more
benchmark similarity 0.45
Abstract

Inter-satellite optical links demand high-precision fine tracking while preserving sufficient received power for data communication, yet these functions are often treated separately at the receiver. This paper proposes a dual-function optical receiver that integrates data reception and fine tracking on a shared, intentionally defocused receiver plane. The architecture combines a central data lens with an annular four-segment tracking detector, creating a fundamental tradeoff between datapower collection and angular-estimation capability. A scalar Fresnel wave-optical model is developed together with nonlinear two-dimensional calibration and a noise-aware worstcase angular-accuracy framework. The receiver geometry is then jointly optimized to maximize the guaranteed fine-tracking range subject to a minimum data-power constraint. Results demonstrate that appropriate co-design of the central aperture and defocus substantially enlarges the usable fine-tracking region while maintaining the required communication-path power. The proposed framework provides a receiver-level benchmark for analyzing and designing integrated communication-and-tracking architectures in future optical inter-satellite terminals.

0.23

Optical ISAC with Single-Photon Avalanche Diode (SPAD) Arrays

eess.SP ·2026-10-19 ·Vasilis K. Papanikolaou, Dimitris Bozanis, Ferdaous Tarhouni, George K. Karagiannidis, Christos Masouros +1 more
similarity 0.45
Abstract · 5 pages, 4 figures, conference

Single-photon avalanche diode (SPAD) arrays offer photon-level sensitivity for sensing in optical integrated sensing and communication (O-ISAC). However, after each detection, a SPAD is blind for a dead time, which saturates the array at high received power. Existing O-ISAC analyses assume linear receivers and do not capture this effect. In this paper, we study ranging with a SPAD array in a monostatic O-ISAC system based on direct-current-biased optical orthogonal frequency-division multiplexing (DCO-OFDM). Sampling the array once per dead time, we model the number of pixels that detect a photon in each sampling interval as a binomial random variable whose success probability accounts for the intensity variation of the echo within a dead time. Based on this model, we derive the Cramér-Rao bound (CRB) for range estimation. We show that the SPAD count model of optical wireless communication, which assumes a constant photon rate over a dead time, causes a range bias that depends on the received power. Moreover, unlike for a linear photodiode, saturation degrades the ranging accuracy beyond a sensing-optimal transmit power. The rate-constrained operating point is then the larger of this power and the power needed for the target data rate. Numerical results validate the analysis against a continuous-time photon-counting simulation and show that the proposed model is needed for ranging.

0.24

Joint Transceiver and Group Index Modulation Design for Wideband Integrated Sensing and Communications Under Beam Squint

eess.SP ·2026-09-27 ·Kaiwen Zheng, Shijian Gao
benchmark similarity 0.45
Abstract

The combination of ultra-wide bandwidth and large-scale multiple-input multiple-output arrays with frequency-independent phase shifters induces beam squint, causing frequency and distance dependent array gain variations across subcarriers and degrading integrated sensing and communications performance. Transceiver beamforming and group index modulation (GIM) can alleviate the impact of beam squint on communication and sensing performance. However, their designs are coupled in the frequency domain, as beamforming shapes the subcarrier responses on which GIM grouping and activation depend. To address this coupling, we propose a joint transceiver beamforming and GIM design that maximizes a weighted combination of normalized worst-case communication and sensing distances. An alternating optimization algorithm jointly refines the transceiver beamformers and GIM configuration. Simulation results show that the proposed joint design reduces bit error rate in the high signal-to-noise ratio region and achieves a more favorable communication-sensing trade-off, while maintaining an average sensing AUC comparable to that of the considered GIM based benchmark schemes.

0.24