CS Paper Radar

Covariance-Weighted Spectral Delay Fusion With a One-Dimensional Affine Model for High-Precision Distributed Optical-Fiber Sensing

Zhiyang Xue, Huan Huang, Ziang Chen, Zhongxing Tian, Zeyu Feng, Yuhan Jiang, Dongdong Zou, Jun Li, Gangxiang Shen, Yi Cai

eess.SP ·submitted 2026-09-15 08:00 UTC · v1
unusual

Abstract

Periodic disturbances can produce ambiguous delay estimates, limiting reliable high-precision localization in distributed optical-fiber sensing. We develop spectral delay fusion for a sensing system using a dual-wavelength bidirectional Mach-Zehnder interferometer, with four phase traces recovered by heterodyne detection and digital demodulation. With calibrated propagation parameters and timing offsets fixed, the six pairwise delay predictions form a one-dimensional affine line segment parameterized by the position of a single dominant disturbance, with sensitivities determined by propagation direction and chromatic dispersion. A generalized least-squares estimator combines unwrapped delays from robust cross-spectral phase slopes with wrapped delays from polarity-invariant phase alignment to jointly estimate position and integer ambiguities under the proposed model, using an effective joint covariance to account for shared-channel and cross-representation dependence. Experiments use a 131.335-km sensing fiber at 1530 and 1550 nm, with periodic phase perturbations applied at five nominal positions from 25 to 125 km. Across the reported groups of 20 records, the proposed method yields sample standard deviations of 1.007-1.685 m at a drive voltage of 500 mV and 0.449-1.324 m at 1 V. The ratio of the smallest single-pair sample standard deviation to that of the proposed method ranges from 2.57 to 19.56 at 500 mV and from 2.12 to 2900 at 1 V. The upper ratio reflects unstable single-pair phase-slope delay estimates for periodic disturbances in the 1-V, nominal 50-km group, where the proposed covariance-weighted fusion maintains meter-scale localization repeatability.

Comment
The manuscript has been submitted for possible publication

Closest papers

Nearest neighbours by meaning across the whole index.

LMMSE-Based Phase Estimator for Fiber-Optic Coherent Spread-Spectrum FBG-Based Sensing Systems

eess.SP ·2026-09-19 ·Yiyang Bai, Élie Awwad, Michèle Wigger
publishedtheory similarity 0.55
Abstract

Fiber Bragg grating (FBG)-based sensing enables localized strain and temperature monitoring by tracking the phase changes of the light reflected from FBGs inserted along a fiber. A major source of disturbance in such systems is laser phase noise, and its influence is typically mitigated by means of additional hardware. In this article, we propose to mitigate the influence of laser phase noise by means of digital signal processing. We propose a practical estimator for coherent single-polarization spread-spectrum FBG-based sensing systems, which is motivated by linearizing the complex received signal and approximating the loss function to formulate a minimum mean square error (MMSE) estimation problem. Moreover, a Cramer-Rao lower bound for this FBG-based estimation problem is presented. Our simulation results demonstrate that the performance of our proposed estimator lies close to the Cramer-Rao lower bound, thus indicating that our estimator effectively compensates for phase noise in FBG-based sensing systems.

0.36

A Parallel Two-Stage Prony Framework for Robust Delay-Doppler Estimation

eess.SP ·2026-10-28 ·Liangchen Sun, Yutaka Jitsumatsu
similarity 0.52
Abstract

This paper addresses off-grid physical delay-Doppler parameter estimation based on an orthogonal time frequency space (OTFS) pilot waveform over doubly selective channels. Based on a known single-pilot waveform with a frequency-shifted sinc pulse structure, we propose a parallel dual-order estimation framework, in which Prony-based Doppler-first and delay-first procedures are executed concurrently and their candidate paths are jointly fused. The two estimation orders provide complementary resolution characteristics, thereby mitigating ambiguities caused by closely spaced multipath components and fractional delay--Doppler mismatch. Numerical results show that the proposed framework improves detection reliability and estimation stability compared with a single-order Prony estimator, especially in off-grid scenarios and low-to-moderate signal-to-noise ratio regimes.

0.26

A Unified Interpretable Semantic Framework for Multi-Modal Fiber Sensing Under Data Scarcity

cs.LG eess.SY ·2026-11-11 ·Khouloud Abdelli
similarity 0.50
Abstract

We propose a unified interpretable semantic framework for multi-modal fiber sensing under data scarcity. The framework maps heterogeneous measurements from state of-polarization (SOP) monitoring, distributed acoustic sensing (DAS), and optical time-domain reflectometry (OTDR) into a shared set of physics-grounded semantic descriptors capturing impulsiveness, persistence, structural characteristics, and energy concentration. Inference is performed through reasoning over semantic class profiles, optionally assisted by retrieval of semantically similar examples to resolve ambiguity and support adaptation without model retraining. Experimental validation on real SOP, DAS, and OTDR datasets demonstrates robust performance across sensing modalities, achieving accuracies of 95.0%, 91.1%, and 94.6%, respectively, while providing transparent and physically interpretable decisions. The proposed framework establishes a unified and data efficient approach for optical fiber sensing in evolving and data scarce deployment environments.

0.24

Sensor-Informed Per-Point Covariance for Structured-Light 3D Imaging

cs.CV ·2026-08-11 ·Sehoon Tak, Jae-Sang Hyun
similarity 0.49
Abstract

Per-point uncertainty models are important in structured-light 3D reconstruction for probabilistic registration, fusion, and quality assessment. In practice, however, point-cloud covariances are often modeled as isotropic constants or inferred from local surface geometry and therefore do not explicitly reflect the measurement process. This is a limitation in fringe projection profilometry (FPP), where phase noise propagates through calibrated reconstruction and produces strongly anisotropic 3D uncertainty. This paper presents a sensor-informed first-order method for constructing a per-point 3 x 3 covariance field from experimentally measured phase precision and calibrated phase-to-depth and phase-to-3D mappings. The formulation separates a rank-1 phase-induced covariance from an effective full-rank completion obtained by incorporating fitted lateral image-space perturbation scales. Repeated-plane experiments under fixed imaging conditions show close alignment of the dominant covariance direction with the viewing ray, and consistency between the dominant phase-induced uncertainty scale and scalar depth uncertainty. In G-ICP registration, the proposed covariance substantially improves over a constant isotropic model while providing a sensor-derived uncertainty representation complementary to conventional geometry-based covariances.

0.04

Bistatic Delay-Doppler Sensing for 3D Target Localization in Distributed Wi-Fi Systems

eess.SP cs.IT ·2026-10-11 ·Kyungmin Hong, Moein Ahmadi, Thomas Stifter, Mounim A. El Yacoubi, Bhavani Shankar Mysore R
published similarity 0.48
Abstract · 6 pages, 6 figures, 2 tables. Accepted for presentation at the 1st IEEE Conference on Integrated Sensing and Communications (ISAC), Lisbon, …

This paper investigates how bistatic delay information improves the observability and localization performance of 3D moving targets in distributed Wi-Fi sensing. Motivated by emerging IEEE 802.11bf WLAN sensing, we consider one transmitter, multiple distributed receivers, and a single target with unknown position and velocity. We compare Doppler-only sensing with delay-Doppler sensing, in which delay-capable receivers provide additional bistatic path-length information for target localization. We derive the Fisher information matrix (FIM) and the position equivalent FIM (EFIM) for both sensing formulations. The resulting observability analysis shows that Doppler-only localization generically requires six receivers, whereas delay-Doppler localization can become locally identifiable with three receivers under non-degenerate geometry. We further study mixed receiver architectures in which only a subset of receivers provides delay estimates. Simulations with Wi-Fi-like bandwidths confirm the transition and quantify the roles of bandwidth, Doppler noise, receiver geometry, and delay-capable receiver availability.

0.32

Sensing-Assisted OFDM with Index Modulation: A Waveform for Optical Wireless Integrated Communication and Localisation

eess.SP ·2026-10-15 ·Ali Waqar Azim, Mohamed Sufyan Islim, Muhammad Ali Imran, Harald Hass, Hanaa Abumarshoud
similarity 0.47
Abstract

This paper proposes sensing-assisted OFDM with index modulation (SA-OFDM-IM) for joint communication and localisation over optical wireless systems. In SA-OFDM-IM, a multilayer frequency-domain architecture partitions each layer's admissible subcarriers into disjoint communication and distributed sensing-pilot subsets, applying group-wise index modulation (IM) within the communication subset. A constrained sensing-to-communication energy allocation jointly minimises average bit-error rate (BER) and delay-based localisation root mean square error (RMSE) under a minimum power-domain margin, enabling low-complexity, ordered-energy detection of both sensing and communication subcarriers without exhaustive maximum-likelihood search. Sensing tones are aggregated across the frame to reconstruct the channel frequency response, yielding the line-of-sight (LoS) delay tap and phase-compensated LoS gain for multilateration and, via the proposed delay-aided received signal strength (RSS) refinement. Simulation results indicate that SA-OFDM-IM can achieve up to 5 dB lower SNR requirement in BER and up to three orders of magnitude lower channel-estimation error than DC-biased optical OFDM, while the RSS estimator removes the SNR-independent error floors of delay-only and hybrid-RSS benchmarks to attain sub-delay-bin range and position accuracy, remaining robust under random known and unknown receiver orientations.

0.22

Impact of Synchronization Offsets and CSI Feedback Delays on Coherent Joint Transmission in Distributed MIMO-OFDM

eess.SP ·2026-10-23 ·Kumar Sai Bondada, Daniel J. Jakubisin, R. Michael Buehrer
similarity 0.47
Abstract

This paper studies the impact of synchronization offsets and CSI feedback delay on coherent joint transmission (CJT) in distributed MIMO-OFDM systems. Unlike conventional co-located MIMO, distributed CJT is highly sensitive to transmitter-dependent synchronization impairments because coherent combining requires phase, frequency, and timing alignment across geographically separated transmitters. Received signal models are derived for residual timing offsets, carrier frequency offsets (CFOs), sampling clock offsets (SCOs), phase noise, and channel variations accumulated during channel state information (CSI) feedback delay. The corresponding spectral efficiency (SE) expressions quantify the degradation in capacity due to loss in coherent-combining gain caused by residual phase rotations, inter-carrier interference (ICI), and precoder misalignment. The SE expressions are numerically evaluated to determine synchronization requirements for maintaining negligible SE degradation, yielding the following findings: a Gaussian-distributed start-time jitter with a standard deviation below 10\% of the sampling period results in negligible SE degradation, with the SE loss decreasing from 0.68\% at an SNR of 0 dB to 0.17\% at 40 dB. A normalized CFO standard deviation of 0.001 also results in negligible ICI-induced degradation, with the SE loss increasing from 0.05\% at an SNR of 0 dB to 2\% at 40 dB. At an SNR of 26 dB, limiting the SE loss to 5\% yields feasible operating points with clock-error standard deviations up to 50 ppb, Doppler-delay products up to 0.1, and phase-tracking error standard deviations up to $40^{\circ}$ at carrier frequency of 3.5 GHz with 30 kHz sub-carrier spacing with 15.36 MHz sampling rate.

0.23

Packet-Level Complex CIR Tracking for Communication-Native mmWave Sensing: An 802.11ad Testbed

eess.SP ·2026-09-14 ·Raquel Marina Noguera Oishi, Haoqiu Xiong, Hany Assasa, Sofie Pollin
similarity 0.47
Abstract

Commercial millimetre-wave (mmWave) Wi-Fi platforms based on IEEE 802.11ad/ay have demonstrated sensing capabilities, but they provide limited visibility into the packet-level measurements and synchronisation mechanisms that determine temporal coherence. We present a programmable 60~GHz IEEE 802.11ad testbed that exposes the complete complex 128-tap channel impulse response (CIR) for every detected packet. This access exposes packet-to-packet delay shifts and common phase drift that commercial-transceiver studies generally do not characterise. We develop a delay-profile alignment method and define a static-reference relative CIR phase that cancels common drift while preserving target-induced variation. We use 30~s respiration sensing to evaluate long-term phase stability for sub-wavelength motion tracking. Across 39 recordings, median absolute waveform correlation increases from 0.41 (timestamp regularised) to 0.52 (delay aligned) and 0.61 (relative-phase calibrated); breathing-rate mean absolute error decreases from 5.1 to 4.1 and 3.6~breaths/min. The results demonstrate controlled characterisation and stabilisation of communication-native WiGig CIR measurements on a fully programmable physical layer.

0.26