CS Paper Radar

Sensor-Informed Per-Point Covariance for Structured-Light 3D Imaging

Sehoon Tak, Jae-Sang Hyun

cs.CV ·submitted 2026-08-11 13:05 UTC · v1

Abstract

Per-point uncertainty models are important in structured-light 3D reconstruction for probabilistic registration, fusion, and quality assessment. In practice, however, point-cloud covariances are often modeled as isotropic constants or inferred from local surface geometry and therefore do not explicitly reflect the measurement process. This is a limitation in fringe projection profilometry (FPP), where phase noise propagates through calibrated reconstruction and produces strongly anisotropic 3D uncertainty. This paper presents a sensor-informed first-order method for constructing a per-point 3 x 3 covariance field from experimentally measured phase precision and calibrated phase-to-depth and phase-to-3D mappings. The formulation separates a rank-1 phase-induced covariance from an effective full-rank completion obtained by incorporating fitted lateral image-space perturbation scales. Repeated-plane experiments under fixed imaging conditions show close alignment of the dominant covariance direction with the viewing ray, and consistency between the dominant phase-induced uncertainty scale and scalar depth uncertainty. In G-ICP registration, the proposed covariance substantially improves over a constant isotropic model while providing a sensor-derived uncertainty representation complementary to conventional geometry-based covariances.

Closest papers

Nearest neighbours by meaning across the whole index.

Certified Abstention for Provably-Unidentifiable Index-Phase Recovery in Image Registration

cs.CV ·2026-10-21 ·Dinh Tuan Nguyen, Trong Nhan Nguyen, Vu Nguyen Minh Hung, Tien Minh Khoi Nguyen, Jaeyeop Choi +3 more
unusual similarity 0.58
Abstract · 13 pages, 5 figures; supplementary material in ancillary files. Code and data: https://doi.org/10.5281/zenodo.21502909

Image registration underpins measurement across scanning, camera, and microscopy imaging, yet a fundamental question is rarely posed: when is the sample-to-position map recoverable at all, and when does any estimator that reports a position necessarily fabricate one? We show that in reference-perturbed sampled imaging, where samples are localized through a perturbed reference, position fidelity (where samples land) and phase fidelity (which reference index becomes each block's origin) are logically independent: no policy acting on position information alone can guarantee phase fidelity. We derive a tight resolution threshold separating recoverable from provably-unidentifiable registration, and a recovery framework that certifies identifiable regions--recovering them exactly--while abstaining on provably-unidentifiable regions rather than hallucinating structure. On a deployed scanning system we measure a direction-bimodal registration offset consistent with the theory. Against classical and learned restoration baselines, certificate-free offset estimators fabricate structure on the unidentifiable regime, whereas the certified method abstains rather than fabricating. Finally, the certified-abstention mechanism carries across scanning, rolling-shutter, and cryo-electron-microscopy imaging--declining rather than fabricating on the regime it flags--though how completely it abstains and how tightly it bounds kept-region risk stay modality-specific (at extreme SNR the cryo-EM certificate abstains only partially): a structural-versus-statistical boundary in registration reliability.

0.33

P$^2$Calib: Utilizing Pattern Priors for LiDAR-Camera Extrinsic Calibration

cs.RO ·2026-09-07 ·Xiangcheng Hu
similarity 0.57
Abstract · 12 pages, 10 figures

Target-based LiDAR-camera extrinsic calibration is a prerequisite for multi-sensor fusion in robotics. However, in the widely adopted four-hole pipeline, \rt{calibration accuracy is limited by hole-center extraction in the LiDAR side, where sparse angular coverage and mixed-pixel returns displace the estimated centers}. This paper presents P$^2$Calib, which exploits \textit{pattern priors}, geometric constraints specified by the CAD model of the target board, to improve calibration accuracy. First, we incorporate the known hole radius as a fitting constraint to prevent center estimates from degrading under sparse angular coverage. Building on the improved hole estimates, we further enforce the rigid rectangular layout of the four holes as a global consistency constraint to correct residual errors across holes. Both priors are integrated into an \rt{interactive tool that runs the pipeline from target detection to the final extrinsic}. Experiments on simulated and real datasets show that P$^2$Calib reduces the joint registration residual by 90\% and 82\% and the held-out reprojection error by 96\% and 77\% over the baseline. \rt{We will release the code and data\codelink{} to facilitate future research.

0.51

ReFineR: Single image to dense point cloud registration at pixel level with point splatting

cs.CV ·2026-11-12 ·Ugo Insalaco, Jean-Emmanuel Deschaud, Pierre Dellenbach
top venuecode/data similarity 0.56
Abstract

Cameras and LiDARs (Light Detection and Ranging) provide complementary observations of the same scene: cameras capture rich appearance cues while LiDAR sensors provide accurate geometric measurements. In this work, we address the problem of fine image-to-point cloud registration from a single image and a roughly estimated camera pose. On robotic platforms, residual reprojection errors of several pixels are commonly observed even after calibration due to temporal desynchronization, mechanical vibrations, or inaccuracies in point cloud reconstruction. Such errors can lead to decimeter-level geometric discrepancies at moderate distances and significantly affect multiple downstream tasks, such as dense cross-modal supervision, texture mapping, and semantic label transfer. To address this challenge, we introduce ReFineR: an offline framework to finely register individual images to pre-reconstructed point clouds. ReFineR builds upon differentiable point splatting rasterization and a smooth Gradient Orientation Measure (GOM) to iteratively refine the camera pose through analysis-by-synthesis optimization. We evaluated the method on a curated dataset of manually calibrated images collected from heterogeneous data sources. Furthermore, we show that an automatic point cloud rescale factor can be estimated prior to optimization, enabling robust refinement across a wide range of scenarios using a single scale-invariant formulation. The project page can be found at https://refiner-project.github.io/

0.38

Closed-form Bayesian homography estimation from noisy point correspondences

cs.CV stat.ME ·2026-09-14 ·Hanne Beuter, Sebastian Dorn
similarity 0.55
Abstract

While homographies are fundamental to many computer vision tasks, the majority of conventional estimation techniques provide only point estimates without directly quantifying uncertainty introduced by noisy observations. Uncertainty, though, propagates to subsequent processing steps such as camera calibration and 3D reconstruction and is particularly relevant in safety-critical and socially relevant fields including medical imaging, autonomous driving, and defense. We present a fast Bayesian formulation for homography estimation from point correspondences that explicitly incorporates measurement uncertainty and prior knowledge while providing a posterior distribution over the homography parameters. A closed-form solution of the posterior mean of the homography is derived in homogeneous coordinates and supplemented by an iterative Bayesian approach to handle non-linearities. Synthetic experiments demonstrate the applicability to projective transformations and show improved estimation accuracy over DLT under varying noise conditions. Image stitching experiments further demonstrate applicability to real image correspondences while additionally providing uncertainty information.

0.32

Adaptive Depth-Map-Guided Bundle Adjustment for Correspondence-Free Multi-View Point Cloud Registration

cs.RO ·2026-09-01 ·Yiran Zhou, Yingyu Wang, Shoudong Huang, Liang Zhao
code/datahot direction similarity 0.55
Abstract · 10 pages, 5 figures

Robotic processing of irregular steel scrap requires dense 3-D measurement to replace manual visual assessment in hazardous cutting workcells. The reconstructed map is used to estimate piece dimensions, boundary geometry, feasible preheating and cutting regions, and collision-aware torch paths. The reconstruction errors therefore propagate directly to downstream measurement and planning. Existing multi-view registration methods commonly rely on feature extraction and data association to establish correspondences between views. In workcells with smooth metallic surfaces, repeated structures, occlusions, and partial overlaps, however, wrong correspondences may be established, leading to inaccurate pose estimation and distorted reconstruction. This paper presents an adaptive layered depth-map-guided bundle adjustment framework for correspondence-free multi-view point cloud registration. The scene is represented by a global 2.5-D grid, where each cell can adaptively maintain multiple depth hypotheses. Raw depth observations are directly projected into the global map to form depth constraints without explicit feature correspondences. At grid cells where multiple surfaces produce conflicting depths, a softmax-based layer assignment links each observation to compatible depth hypotheses. The resulting nonlinear least-squares formulation jointly refines sensor poses and the layered depth map, with correspondences implicitly induced by the depth-map representation and projection model. Experiments on self-collected industrial datasets show that the proposed method achieves consistently competitive reconstruction accuracy while maintaining robustness and low computational cost in challenging industrial scenarios. We release the open-source code implementation at: https://github.com/YiranZhou-Robotics/ADM-BA.git

0.42

VeriCalib: Verifiable Target-Based LiDAR-Camera Calibration

cs.RO ·2026-10-20 ·Xiangcheng Hu, Xieyuanli Chen, Feiyi Chen, Shengli Ren, Shiyang Chen +6 more
similarity 0.55
Abstract · 35 pages, 20 figures, 13 tables

Target-based extrinsic calibration estimates the rigid transform between sensors from a few observations of a known target, and its result is commonly assessed by the root-mean-square error of the fitted residuals. However, this scalar error is computed on the same observations and therefore cannot indicate whether to accept the result, re-extract, recollect or add observations. This paper presents VeriCalib, which formulates extrinsic calibration as a verifiable estimation problem and reports a calibration state. The key insight is a two-level extrinsic compensation mechanism, in which the extrinsic compensates the rigid part of each observation error at the residual level, and rotation and translation compensate each other at the parameter level. Consequently, the fitted residual can reveal neither an inconsistency between the observations and the model nor whether the estimated extrinsic is reliable in every direction. Accordingly, we assess the calibration through a structured covariance that jointly propagates the uncertainty of the camera and LiDAR board features with a known-geometry prior, and estimate its scale as a variance component from the residuals. On this covariance, we decouple rotation and translation to resolve the precision along each direction and guide data collection toward the weakest one. Since this precision presumes consistent observations, we further develop within-view and cross-view checks that examine the internal residual and the rigid discrepancy between observations, respectively, with thresholds that hold their significance level under an unknown noise level. We also extend the minimal detectable bias to the extrinsic to bound the smallest detectable fault along each direction. These criteria form a calibration state that indicates whether to accept the result or how to collect the data...

0.22

Trust the Ray, Not the Depth: Ray-Lateral Agreement for Multi-View 3D Human Pose Fusion

cs.CV ·2026-11-17 ·Farnoosh Koleini, Ahmed Helmy, Pu Wang, Xiwu Cao
benchmarkhot direction similarity 0.55
Abstract · 10 pages, 5 figures, 1 table

Put a monocular mesh estimator behind every camera of a calibrated rig, and the reconstructed bodies land a meter or more apart. The cause is geometric: each estimate sits at the depth implied by a focal length the network assumed, not the one the camera has. Its error therefore points almost entirely along its own viewing ray, and the calibration tells us that direction exactly. To address this, we introduce the Ray-Lateral Agreement (RLA), which follows one rule: trust the ray, not the depth. RLA first slides every estimate along its own rays, which removes the depth bias and leaves the shape untouched. It then fuses the views one point at a time, under a Gaussian error whose precision follows each viewing ray. The maximum-likelihood solution is closed-form, interpolates between averaging and midpoint triangulation, and stays well conditioned where triangulation is singular. Robustness is the harder half, because correct views also disagree along their rays. Any weight built on the full residual therefore punishes good views together with bad ones. Ray-lateral agreement instead scores every view, at every point, by its residual across that view's own ray alone. We evaluated RLA on multi-camera public benchmark datasets. Across two, three, and four cameras and three per-view pose estimators, RLA consistently achieves lower worst-case error than all triangulation baselines.

0.37

3D Pose Estimation in Projection Space via Pixel-level Visible Light Communication

cs.RO ·2026-11-04 ·Michikuni Eguchi, Takefumi Hiraki
similarity 0.55
Abstract · submitted to IEEE Access

Projector-based augmented reality enables natural interaction between users and devices by overlaying digital information onto the physical world through projected imagery. A key technical requirement of such systems is accurate positional alignment between the projector and the devices. Pixel-level Visible Light Communication (PVLC) achieves this alignment without external sensing infrastructure by embedding invisible spatial codes into each projected pixel through high-speed brightness modulation that preserves image quality. However, the information that PVLC transmits is inherently planar. PVLC has therefore been limited to devices moving on a flat surface and cannot estimate the 3D pose of devices in three-dimensional space, such as aerial robots. To extend PVLC-based pose estimation to three dimensions, we formulate it as a Perspective-n-Point (PnP) problem. The 2D pixel positions that four coplanar photosensors on the device receive via PVLC serve as the image points, and their known 3D layout provides the object points. Experiments show that the proposed system estimates 3D pose with a latency of approximately 8~ms and a 3D position RMSE of 19.2~mm after Kalman filtering. These results confirm the first realization of real-time 3D pose estimation coordinated with high-quality projected image content without external sensing infrastructure.

0.18