CS Paper Radar

Calibrated Alarm Thresholds for Compact Fire and Smoke Detectors

Vikas Sandireddy

cs.CV cs.AI ·submitted 2026-11-09 01:56 UTC · v1

Abstract

Compact object detectors such as YOLOv8n are a common choice for camera-based fire and smoke detection on low-power devices. These detectors are usually evaluated with box-level metrics such as mean average precision, and their outputs are turned into decisions with a fixed confidence threshold such as 0.25 or 0.5. A fire monitoring system, however, makes one decision per image: raise an alarm or not. In this paper we evaluate two publicly available compact detectors on the D-Fire test set at the image level. We compare three simple rules for turning box detections into one alarm score per image, and we use a split conformal procedure to choose the alarm threshold from held-out images so that the expected fraction of missed fire and smoke images stays below a chosen target. We find that the same fixed threshold leads to very different miss rates for the two detectors, 17.3 and 8.4 percent at a threshold of 0.5, while the calibrated threshold meets miss-rate targets of 10, 5 and 1 percent for both detectors and all three rules. At a 5 percent target, the false alarm rate on images without fire or smoke stays between 1.2 and 3.0 percent. We also find that smoke-only images stay below the target even when the overall target is met, and we describe the main failure cases.

Closest papers

Nearest neighbours by meaning across the whole index.

Weather Adaptive Autonomous Driving

cs.CV ·2026-11-03 ·Nicholas Taylor, Alexander Picon, Sudip Dhakal
similarity 0.64
Abstract

Camera object detectors lose recall in rain, fog, snow and sand, and the confidence threshold at which a detector is deployed decides how many objects it misses and how many false alarms it raises. We study how a frozen detector should make this decision in adverse weather. We first reproduce SeqCRC, a conformal object detector whose first step calibrates the confidence threshold by conformal risk control (CRC), and use that step, calibrated separately in each weather condition, as our baseline. With YOLOv8x it keeps the held-out miss fraction within a 20% budget in every DAWN weather bin, where a single global threshold fails in fog, but the false alarms it needs are an output rather than a choice: from 1.6 to 117 per image across DAWN and BDD100K conditions. We then propose a calibrated trade-off dial. One setting, $λ$, the number of false alarms accepted to avoid one missed object, selects the expected-cost-optimal decision rule: either one score threshold, or a per-detection rule that keeps a box when its calibrated probability of being a real object, estimated by gradient-boosted trees from the detector's own per-box outputs, is at least $1/(1+λ)$. F-score preferences map onto the same dial, and CRC applied to $λ$ itself is planned to restore a per-condition miss guarantee. The dial is fitted once on BDD100K train and graded only on BDD100K val and DAWN.

0.16

Aerial Person Detection under Edge Constraints: Held-Out Evaluation and Edge-Ground Verification

cs.CV cs.RO ·2026-11-15 ·Raghu Venkat, Tricha Anjali
code/datahot direction similarity 0.60
Abstract · 14 pages, 1 figure, 8 tables. Code, truth registers and result files: https://github.com/numberz-ai/aerial-person-detector

A search drone sees a missing person as a few pixels, carries a small computer, and shares a narrow radio link. We study person detection under those limits; the primary evaluations were declared before they ran, and later analyses are marked exploratory. In an exploratory comparison, holding out recording blocks inferred from thermal frame identifiers cut recall at a fixed false-alarm target from 32.7% to 12.3%. With nothing tuned on test blocks, a 46,000-parameter detector gated by a contrast cue finds 10.4% of people against 5.7% for the same network applied everywhere. A standard detector, YOLO11n, trained under the same folds finds 54.5% at a similar false-alarm rate for about eleven times the arithmetic, and on our 4K field footage at 117 m has a walking person among its top 16 detections in up to 92% of frames against 74% for our board. Run alone, YOLO11n's thresholds set at one location overshot their false-alarm target 1.7 to 3.4 times at new locations, and its best configuration at altitude cost 4 to 24 standard passes per frame. Re-scoring its 16 best crops (154 KB per frame) with an 842,000-parameter ground model, thresholds frozen on a validation location, raised recall from 44.9% to 53.7% against the same 16 crops with YOLO's own scores; in a post hoc paired analysis over 15 test locations the gain was +8.8 points [+2.4, +12.5]. Pooled false detections fell from 0.86 to 0.64 per frame, but that paired change was not distinguishable from zero. Coverage of a still person in earth tones was very low for both detectors in the clips we flew.

0.36

A Sentinel-2 benchmark dataset for deep-learning active-fire segmentation across 25 California wildfires, July 2020-August 2026

eess.IV cs.CVcs.LGeess.SP+1 ·2026-09-14 ·Shreyan Mitra, Mohammadreza Narimani, Parastoo Farajpoor
publishedbenchmarkcode/datahot direction similarity 0.60
Abstract · 13 pages, 9 figures, 5 tables. Published in Data in Brief (Elsevier), Volume 69, Article 113357 (2026). Data: https://doi.org/10.5281/zenodo…

This article describes an open image dataset for developing and evaluating active-fire segmentation methods in satellite imagery. The dataset contains 2,148 image-mask pairs from 25 California wildfires, with acquisitions spanning July 2020 to August 2026. Each image is a 512x512-pixel, three-channel composite derived from Sentinel-2 Level-2A bands B12, B11 and B8A at 20 m spatial sampling. A fixed linear rendering is applied throughout the dataset. Corresponding masks distinguish background, SWIR-rule active fire and invalid observations. The masks were generated from shortwave-infrared brightness and near-infrared contrast, followed by constrained neighborhood growth. The release includes chip-level metadata and an incident-disjoint partition containing 18 training, three validation and four test fires. Among the image pairs, 841 contain active-fire labels; these labels occupy 0.0766% of all grid cells. A mask-blind analyst review covers 233 test chips and provides a separate assessment of the rule-generated labels at chip and connected-component levels. Reference training and evaluation code accompanies the data, including a ResNet-34 U-Net implementation with validation-based checkpoint and threshold selection. The archived images, masks, metadata and review annotations support research on rare-class segmentation, learning from algorithmic labels and transfer across fire incidents. The versioned dataset is deposited on Zenodo, with preparation and reuse software maintained in a public GitHub repository.

0.73

Vision Language Models for Primary Structure Threat Identification in Wildland Urban Interface Fires

cs.CV ·2026-11-07 ·Zhangding Liu, Neda Mohammadi, John E. Taylor
published similarity 0.60
Abstract · 6 pages, 3 figures, 1 table. Accepted at the 2026 IEEE International Smart Cities Conference (ISC2), Porto, Portugal

Wildland urban interface (WUI) fires increasingly threaten communities and infrastructure, motivating the need for rapid visual assessment. Recent research has focused primarily on detecting fire and assessing post-event damage. However, structure-level fire threat identification during active WUI fire events remains underexplored. This study evaluates Qwen3-VL-8B-Instruct for this active-fire decision using two separately scored tracks: 1,824 synthetic images from 491 designed WUI scenarios and 45 frames from a controlled-burn experiment conducted in collaboration with Columbus Fire & EMS Department. Under zero-shot prompting, the model returned valid target fields for 1,808 synthetic images and 39 controlled-burn frames. Accuracy among valid outputs was 94.0% for the synthetic track and 69.2% for the controlled-burn track, compared with a 16.0% random-selection baseline for the latter. On the synthetic track, the model generally identified the intended target across varied designed WUI scenarios when the relevant fire-spread cues were visually distinct. Controlled-burn performance was well above random selection, but errors showed difficulty interpreting spatial relations in complex scenes. The dual-track protocol provides scalable stress testing in designed scenarios and a controlled-burn reference for assessing model behavior under physical fire conditions. Future work can use the synthetic data for VLM post-training and then evaluate the adapted models on larger and more diverse real WUI fire datasets.

0.28

Construction and Evaluation of Machine Learning Models for Near-Real-Time Fire Detection from MTG FCI Imagery

cs.CV ·2026-10-04 ·Asaf Vanunu, Boaz Nadler, Arnon Karnieli
code/data similarity 0.58
Abstract

Geostationary satellite observations are important for wildfire detection and monitoring. The current study evaluates machine learning models for MTG FCI near-real-time fire detection in 1- and 2-km spatial configurations and compares them with threshold-based algorithms. The models were trained and evaluated using VIIRS fire reference data across diverse ecological regions in Europe, Africa, and the Middle East. The key results are that 1-km models significantly outperform both their 2-km variants and operational threshold products. The constructed 1-km models achieved F1 scores higher by up to 0.36 compared to baseline products. Importantly, the 1-km models detected small fires with higher probability compared to competing models. Finally, the models robustly detected fires up to 260 min earlier than baseline products. To support opensource applications, our trained models are publicly available.

0.22

Comparing a gradient boosting algorithm to the GOES FDC for wildfire detection

cs.CV cs.LG ·2026-10-01 ·Asaf Vanunu, Boaz Nadler, Arnon Karnieli
similarity 0.57
Abstract

Wildfires pose severe risks to human life, ecosystems, and property. This study presents a machine learning approach for wildfire detection from GOES ABI imagery. A CatBoost model was trained on a large dataset with thousands of ABI images and over 300,000 matching VIIRS fire detections. An evaluation on a separate dataset across five regions showed that the learned CatBoost model outperformed the operational GOES Fire Detection and Characterization (FDC) product. It achieved higher precision, recall, and F1 scores both within and outside the training area. The CatBoost model achieved F1 scores that were 0.16 to 0.38 higher than the GOES FDC in all regions. In addition, out of 51 historical fire events, the CatBoost detected 26 fires before both VIIRS and GOES FDC, compared to only six earlier detections by the GOES FDC. Importantly, the CatBoost model achieved accurate wildfire detection also during nighttime, whereas the GOES FDC obtained very low recall values, around 0.03. This study demonstrates that machine learning models may offer significant improvements over existing geostationary fire products, including higher accuracy, fewer false alarms, and earlier detection.

0.25

Input-Adaptive Gating of a Dehazing Front-End for On-Device Perception in Smoke-Obscured Environments

cs.CV ·2026-08-30 ·Seongjun Kang, Ishaan Garg, Vishnu Bharadwaj
unusual similarity 0.57
Abstract · Submitted to NeurIPS

Two-stage vision pipelines often place an enhancement network before a task network, on the assumption that a cleaner input produces a better output. We evaluate this in a firefighter assistance pipeline, where a dehazer precedes an edge detector that renders smoke-filled rooms as structural outlines. Both were designed for a Raspberry Pi 4, at 355K and 23K parameters, and quantized to UINT8 via TensorFlow Lite. The float dehazer reaches 18.60 dB peak signal-to-noise ratio (PSNR) on held-out real smoke against 13.60 dB unprocessed and 17.08 dB for an AOD-Net trained on the same data, and the edge detector reaches an F-measure at optimal dataset scale (ODS) of 0.738, outperforming an optimized Canny's result of 0.692. Dehazing improves edge extraction under dense smoke but degrades it on clear and lightly hazed frames, where the dehazer discards more detail than the haze obscures. We therefore run the dehazer only when a dark channel haze estimate exceeds a threshold, a 10.1 ms test that lets the pipeline save 469.6 ms on the dehazing stage. Averaged over four haze levels, gating is more accurate than either fixed decision, at 0.675 mean ODS against 0.664 for always dehazing and 0.630 for never dehazing. It reduces the mean per-frame time on the Raspberry Pi from 569 ms to 321 ms, and on clear frames increases the frame rate fivefold, from 1.8 to 9 frames per second.

0.25

Distilling Vision-Language Models for On-Device Fire Understanding

cs.AI ·2026-09-05 ·Mohammad Kazzazi, Zixuan Liu, Siavash Khajavi
similarity 0.56
Abstract

Vision-language models (VLMs) offer a promising alternative to conventional fire detection systems by reasoning about the semantic context of a scene and thus reducing false alarms, yet their large model size makes deployment on embedded fire sensors impractical. In this paper, we study how domain-specialized VLMs can be compressed for fully on-device deployment without losing the safety-critical behavior required for fire detection. We develop a teacher-student knowledge distillation framework in which large VLMs fine-tuned for fire understanding can be distilled into lightweight students. Experiments across multiple VLM families and model scales show that compact students preserve most of their teachers' fire-understanding capability. We further deploy the distilled models on our commercial Detectium fire detection sensor and jointly evaluate reasoning accuracy, latency, and memory usage. The results show that compression and deployment affect not only accuracy but also model failure modes, with Qwen2.5-0.5B providing the strongest overall deployment trade-off. Our findings provide broader guidance for deploying domain-specialized VLMs in resource-constrained, safety-critical settings.

0.25