CS Paper Radar

Input-Adaptive Gating of a Dehazing Front-End for On-Device Perception in Smoke-Obscured Environments

Seongjun Kang, Ishaan Garg, Vishnu Bharadwaj

cs.CV ·submitted 2026-08-30 20:44 UTC · v1
unusual

Abstract

Two-stage vision pipelines often place an enhancement network before a task network, on the assumption that a cleaner input produces a better output. We evaluate this in a firefighter assistance pipeline, where a dehazer precedes an edge detector that renders smoke-filled rooms as structural outlines. Both were designed for a Raspberry Pi 4, at 355K and 23K parameters, and quantized to UINT8 via TensorFlow Lite. The float dehazer reaches 18.60 dB peak signal-to-noise ratio (PSNR) on held-out real smoke against 13.60 dB unprocessed and 17.08 dB for an AOD-Net trained on the same data, and the edge detector reaches an F-measure at optimal dataset scale (ODS) of 0.738, outperforming an optimized Canny's result of 0.692. Dehazing improves edge extraction under dense smoke but degrades it on clear and lightly hazed frames, where the dehazer discards more detail than the haze obscures. We therefore run the dehazer only when a dark channel haze estimate exceeds a threshold, a 10.1 ms test that lets the pipeline save 469.6 ms on the dehazing stage. Averaged over four haze levels, gating is more accurate than either fixed decision, at 0.675 mean ODS against 0.664 for always dehazing and 0.630 for never dehazing. It reduces the mean per-frame time on the Raspberry Pi from 569 ms to 321 ms, and on clear frames increases the frame rate fivefold, from 1.8 to 9 frames per second.

Comment
Submitted to NeurIPS

Closest papers

Nearest neighbours by meaning across the whole index.

PhysDNet: Physics-Driven Gradient Amplification for Real-Time Image Dehazing

cs.CV cs.LG ·2026-11-07 ·Rayen Dhahri, Lei Sun, Victor Javier Kartsch Morinigo, Alice Pagnoux, Luca Benini +2 more
top venuebenchmarkcode/data similarity 0.65
Abstract · Accepted to NeurIPS 2026. Code, deployment scripts and pre-trained checkpoints: https://github.com/Heatdh/PhysDnet

Modern dehazing networks are often computationally expensive and overfit to synthetic haze, limiting real-time deployment. This underscores an urgent demand for efficient, high-fidelity restoration methods that can operate on resource-constrained edge devices in practical, dynamic environments. We introduce PhysDNet, a lightweight multimodal architecture that fuses NIR imagery with sparse LiDAR depth and is trained with a physics-constrained dual-head objective. Differentiating through a fixed Koschmieder inversion induces density-adaptive gradient amplification, acting as an implicit resource allocation mechanism that concentrates learning on heavily degraded regions without increasing inference cost. PhysDNet delivers superior restoration with minimal capacity and enhanced training efficiency, facilitating real-time deployment on edge devices without increasing inference overhead. On the Seeing Through Fog benchmark, PhysDNet outperforms competitors by 1.67 dB at 5.2 times lower compute while recovering 54.9% of fog-induced detection loss. Ablations and cross-domain evaluations show that physics-guided training improves generalization, including under non-homogeneous haze that violates the Koschmieder assumption. PhysDNet further demonstrates compatibility with fixed-function NPUs, running at 29/45/99 FPS at <4 W across L/M/S variants. Code, deployment scripts and pre-trained checkpoints are available at https://github.com/Heatdh/PhysDnet.

0.50

YOLOF-MLD: A Multi-Level Distillation Framework for Efficient Object Detection

cs.CV ·2026-10-29 ·Xiaolong Wu, Liming Zheng, Zitong Liu, Yue Zheng
code/datahot direction similarity 0.63
Abstract · 4 pages

Efficient object detection on resource-constrained edge devices is essential for safety-critical applications such as fire-smoke monitoring. However, current lightweight frameworks, such as YOLO26, still rely on the parameter-dense multi-branch Feature Pyramid Network (FPN), preventing full exploitation of their lightweight advantage. Replacing FPN with YOLOF's single-input-single-output (SiSo) neck is a promising solution but causes substantial accuracy loss. To alleviate this, we propose YOLOF-MLD, a CPU-efficient multi-level distillation (MLD) framework that combines a YOLO26n backbone, a SiSo neck, and MLD. It aligns features at the backbone via sliced-semantics matching, neck with receptive-field matching, and response levels. On D-Fire and Annotated Fire-Smoke (AFS) datasets, YOLOF-MLD reduces the parameter count of YOLO26n by 35.7\% and achieves a 62.3\% speedup on Raspberry Pi 5, attaining 71.6% and 59.9% mAP@50, respectively, compared with 75.5% and 60.0% for YOLO26n. These results demonstrate a competitive accuracy--latency trade-off for edge deployment. Our code is available at https://github.com/XiaolongWU111/YOLOF---MLD/blob/main/README.md.

0.45

GRADE: Single-Frame Generative Radar Depth Estimation Under Visual Degradation

cs.CV cs.RO ·2026-09-09 ·Bin Zhao, Patrick Chiou, Nakul Garg
top venuecode/data similarity 0.62
Abstract · To appear in ACM MobiCom 2026

Dense 3D depth perception fails under smoke, fog, and darkness because optical sensors cannot penetrate airborne particulates. mmWave radar remains usable and measures range accurately under these conditions, but its small aperture limits angular resolution. We present GRADE, which grounds a pretrained generative prior in single-frame radar geometry to estimate high-fidelity metric depth. GRADE first maps raw 4D radar spectra to coarse metric depth. A latent diffusion backbone then recovers structural detail while conditioning every denoising step on this estimate. A pixel-space adapter uses residual camera cues when available and is trained across clear, smoke-degraded, and occluded inputs so the full output approaches the radar-conditioned path as visibility degrades. Trained and evaluated on ~95K frames across 12 buildings with real smoke, GRADE achieves an MAE of 0.303 m in clear scenes and 0.313 m under smoke, outperforming existing baselines. Code and datasets are available at https://phi-lab-rice.github.io/GRADE.

0.72

Calibrated Alarm Thresholds for Compact Fire and Smoke Detectors

cs.CV cs.AI ·2026-11-09 ·Vikas Sandireddy
similarity 0.57
Abstract

Compact object detectors such as YOLOv8n are a common choice for camera-based fire and smoke detection on low-power devices. These detectors are usually evaluated with box-level metrics such as mean average precision, and their outputs are turned into decisions with a fixed confidence threshold such as 0.25 or 0.5. A fire monitoring system, however, makes one decision per image: raise an alarm or not. In this paper we evaluate two publicly available compact detectors on the D-Fire test set at the image level. We compare three simple rules for turning box detections into one alarm score per image, and we use a split conformal procedure to choose the alarm threshold from held-out images so that the expected fraction of missed fire and smoke images stays below a chosen target. We find that the same fixed threshold leads to very different miss rates for the two detectors, 17.3 and 8.4 percent at a threshold of 0.5, while the calibrated threshold meets miss-rate targets of 10, 5 and 1 percent for both detectors and all three rules. At a 5 percent target, the false alarm rate on images without fire or smoke stays between 1.2 and 3.0 percent. We also find that smoke-only images stay below the target even when the overall target is met, and we describe the main failure cases.

0.28

EM-SNN: Efficiently Modulated Spiking Neural Network for Remote Sensing Image Dehazing

cs.CV ·2026-10-07 ·Jie Shao, Jiaqi Ma, Wenwen Min, Beihang Song, Ning Chen +2 more
similarity 0.56
Abstract

Although spiking neural networks (SNNs) provide an energy-efficient alternative to artificial neural networks (ANNs), their application to remote sensing image dehazing remains limited. A key challenge arises from the coupling between haze-induced high-frequency attenuation and discrete spike thresholding. This interaction suppresses weak responses and fundamentally limits the recovery of edges, textures, and fine details in spiking dehazing models. To address this challenge, we propose the Efficiently Modulated Spiking Neural Network (EM-SNN), a dedicated spiking framework tailored to remote sensing image dehazing. EM-SNN integrates a statistics-driven Threshold-Modulated Leaky Integrate-and-Fire (TM-LIF) neuron to adaptively compensate for haze-induced contrast compression, together with a Spike Sobel Modulation (SSM) module that enhances structural cues and reduces depth-wise attenuation during spiking feature propagation. By jointly modulating activation scales and structural representations, EM-SNN improves dehazing performance while preserving the inherent event-driven sparsity of SNNs. Experiments on HRSD, RICE, RRSHID, and SateHaze1K demonstrate that EM-SNN achieves competitive dehazing performance while consuming only one quarter of the energy of the strong ANN baseline SFRDP-Net.

0.20

Obscured Wildfire Flame Detection by Spatio-temporal Analysis of Smoke Patterns Using Frame-wise Transformers

cs.CV cs.AI ·2026-11-10 ·Uma Meleti, Abolfazl Razi, Fatemeh Afghah
top venuehot direction similarity 0.55
Abstract · 8 pages, 8 figures. Published in the 2024 20th International Conference on Distributed Computing in Smart Systems and the Internet of Things…

In this paper, we propose a new paradigm in wildfire management for detecting both visible and obscured fire using Deep Learning (DL). The essence of our method is the joint spatial and temporal analysis of RGB videos, embracing the fact that temporal patterns of smoke motions in consecutive video frames can indicate obscured fire flames. This perspective contrasts the traditional approach of independently analyzing images and individual video frames. To this end, we propose a frame-wise transformer architecture that applies an attention mechanism between the consecutive frames while preserving spatial information within frames as opposed to regular attention mechanisms like the non-local block, which combines spatial and temporal information into a single vector. We also optimize the temporal pattern lengths under different spatial resolutions to achieve the highest performance while reducing the computational cost. To investigate the applicability of our method in aerial image processing, we applied it to a curated version of the FLAME2 dataset that includes dual-mode RGB/IR videos. The IR video feed is used to extract ground truth, while the model is trained only on RGB videos to maintain applicability to lowcost commercial drones (which are equipped only with regular cameras) and facilitate processing existing RGB-only datasets. Our proposed method achieves a Segmentation Foreground Dice score of 92.61%, an Object Detection Precision and Recall rate of 93.21% and 91.73%, and clip-level classification accuracy of 98.02%, respectively. We also investigated the efficacy and generalizability of our method through ablation study

0.53

Efficient Image Denoising on Smartphone GPUs: Mobile AI 2026 Challenge Report

cs.CV cs.AI ·2026-10-31 ·Andrey Ignatov, Georgy Perevozchikov, Radu Timofte, HaoDong Wu, Desheng Cai +15 more
highly cited similarity 0.55
Abstract

Image denoising is a fundamental problem in mobile photography. Despite a large number of solutions proposed for this task, the majority of them are trained on synthetically produced noisy images, and are additionally too computationally heavy for processing full-resolution images on mobile devices. This creates a need for efficient deep learning-based models that are not only performant but can also be deployed on constrained mobile hardware. In this Mobile AI challenge, we address this problem and propose the participants to design fast solutions that can denoise Full HD resolution photos while running on popular smartphone GPUs from Qualcomm and Arm. For this, the participants were provided with a large-scale dataset consisting of noisy-clean image pairs captured in the wild. The runtime of all models was evaluated on the Snapdragon 8 Elite Gen 5 and Dimensity 9500 chipsets with the Adreno and Mali GPUs, respectively. Top solutions proposed in this challenge are able to perform high-quality image denoising under 100 milliseconds on both platforms while reaching a PSNR score of over 37 dB. A comprehensive description of the models developed in the challenge is provided in this paper.

0.43

Raw Imagery Impacting Your AI: Should You Care?

eess.IV cs.AIcs.CV ·2026-09-29 ·Adrien Dorise, Marjorie Bellizzi, Stéphane May
published similarity 0.54
Abstract · Accepted at OBPDC 2026

Onboard AI is gaining interest for space applications such as vessel, wildfire, and cloud detection, where real-time processing can improve mission reactivity and reduce downlink needs. However, onboard models may operate on raw or minimally processed imagery rather than on restored ground products. This study evaluates how image degradation affects object detection by varying Signal-to-Noise Ratio (SNR), Modulation Transfer Function (MTF) at Nyquist, and Ground Sampling Distance (GSD). Controlled degradations are applied to Very High Resolution Maxar imagery, and three lightweight detectors, YOLOv5s, YOLOX-S, and NanoDet, are evaluated on the resulting operating points. The results show that the impact of image quality depends on the degradation mechanism, and that increasing degradation does not necessarily lead to a proportional decrease in vessel detection performance. GSD produces the most consistent performance shift, while MTF and SNR effects depend more on the model and resolution. Severe combinations of blur and noise produce the largest losses. These results provide task-level information that can support sensor, processing, and AI trade-offs for future onboard systems.

0.34