CS Paper Radar

Wave-Domain Semantic ISAC: Holographic Surfaces as Analog Semantic Encoders for Integrated TN-NTN

Shadi Danesh, Pooria Salami, Hesaam Zaravashan, Abdulkadir Köse, Ayhan Akbas, Chuan Heng Foh, Mohsen Khalily

cs.LO ·submitted 2026-11-10 13:53 UTC · v1
published

Abstract

Semantic communication, near-field operation, and integrated sensing and communication (ISAC) are often considered separately in terrestrial and non-terrestrial networks (TN--NTN). We show how a large electromagnetic aperture can connect them. \textcolor{black}{Nonlocal metasurfaces and holographic apertures act on the spatial spectrum of an incident field and can execute linear projections, which form an early stage of semantic feature extraction, directly in the wave domain before digitisation, thereby reducing the corresponding digital processing burden.} Near-field focusing also provides position-dependent sensing features, allowing the aperture to serve as an analog semantic-ISAC front end on resource-constrained aerial and satellite platforms. We describe the underlying physics, the co-design of constrained analog projections with lightweight digital decoders, and a case study in which a data-adaptive projection outperforms a fully digital baseline in the simulated energy-limited regime while transmitting four times fewer coefficients and using 11.4 times fewer decoder MACs. Finally, we identify relevant 3GPP, ITU-R, and ETSI activities and the remaining standardisation gaps.

Comment
8 pages, 3 figures, accepted for publication in IEEE Communications Standards Magazine

Closest papers

Nearest neighbours by meaning across the whole index.

Learning or Modeling? Virtual XL-RIS Observation Reconstruction for Near-Field Sensing

eess.SP ·2026-10-13 ·Tuo Wu, Jie Tang, Jiacheng Wang, Kangda Zhi, Maged Elkashlan +3 more
similarity 0.60
Abstract · 13 pages, 6 figures

A passive extremely large-scale reconfigurable intelligent surface (XL-RIS) offers a position-sensitive aperture for near-field sensing, but its element-wise signals are not directly observed. Recovering this virtual RIS observation (VOR) from fewer base-station measurements requires prior information. This paper investigates when calibrated propagation geometry or paired training data provides the more effective reconstruction prior. For a common sensing operator and target signal, we develop off-grid near-field sparse parametric reconstruction (OG-NF-SPR) and compare it with compact and DenseNet-based deep reconstructors. OG-NF-SPR uses reflected-path projection for position initialization, followed by Bayesian estimation of all path gains and continuous position refinement. A causal extension incorporates temporal correlation without trajectory labels. Controlled simulations use near-field UAV tracking as an illustration and separately examine noise, position-distribution shift, calibration error, and propagation mismatch. Under matched propagation at 20 dB, OG-NF-SPR achieves approximately 67% lower reconstruction NMSE than the two nominal deep networks. At low SNR, statistical averaging is more effective than selecting a single geometric explanation. Under sufficiently strong repeatable mismatch, a same-size network trained on the mismatch family outperforms the nominal physical estimator, whereas nominal training does not provide this benefit. Temporal regularization also reduces position RMSE from 0.653 m to 0.225 m on a shared trajectory. The results relate reconstruction performance to measurement quality, calibration accuracy, and training coverage, providing guidance on when geometry can replace supervised labels and when additional data are useful.

0.25

Holographic Beamforming for Range-Doppler Sidelobe Suppression in OFDM-ISAC

eess.SP ·2026-08-19 ·Amirhossein Azarbahram, Onel L. A. López
similarity 0.60
Abstract

This paper investigates range--Doppler (RD) sidelobe suppression in an integrated sensing and communications system with a reconfigurable holographic surface (RHS). We jointly design the digital feed precoders and RHS amplitudes to minimize the expected integrated RD sidelobe level over random communication symbols, subject to target-illumination and communication constraints. We then develop an alternating successive convex approximation method that updates the feed and RHS variables through convex quadratic subproblems. Numerical results show that the proposed design consistently reduces normalized RD sidelobe levels across different apertures and configurations, and improves sensing weak-target detectability.

0.18

Wavenumber-Domain Virtual Arrays for Holographic Near-Field Localization

eess.SP ·2026-08-10 ·Giovanni Iacovelli, Chandan Kumar Sheemar, Symeon Chatzinotas
similarity 0.59
Abstract

Monostatic localization of multiple point targets is studied for a holographic aperture operated through wavenumber-domain modes. A specular-point condition delimits the validity of the spectral model as a near-field approximation. A single snapshot observes a projection of dimension at most the target count times the polarization components, while invertible coding recovers the full channel and places the decoded data on the difference lattice of transmit and receive wavenumbers. Rank conditions settle identifiability, and the Fisher matrix reduces to a covariance over the lattice, dictating a nested mode selection that attains full-aperture resolution with only tens of RF chains.

0.38

Goal-Oriented Wave Computing for Direction-of-Arrival Estimation

eess.SP physics.app-ph ·2026-10-05 ·Mert Kalfa
benchmark similarity 0.58
Abstract · 9 pages, 2 figures, 4 tables

Programmable metasurfaces---arrays of elements whose electromagnetic response can be tuned electronically---can process signals as a wave propagates through or reflects off them, a paradigm known as wave-domain analog computing. The design strategy is typically indirect: the surface is fitted to a prescribed linear operator, such as a discrete Fourier transform, and the result is read from output power measurements. Using direction-of-arrival (DoA) estimation as a canonical benchmark, we study what this indirection costs across analog computing topologies, namely reflective reconfigurable intelligent surfaces (RIS), beyond-diagonal RIS (BD-RIS), and stacked intelligent metasurfaces (SIM). We first derive Cramér--Rao bounds for the complete physical estimation chain, including one that accounts for output detectors measuring only intensity. We then formulate a goal-oriented alternative where the surfaces are trained directly through the deployed readout, with no operator target. We observe that goal-oriented training lets sparsely connected or shallower surfaces reach the task performance of their more complex operator-fitted counterparts---despite nearly identical Fisher information---and that the advantage persists under coarsely quantized (1--3 bit) control. From 16 to 64 elements, the depth saving persists, while the connectivity a beyond-diagonal RIS needs grows with the aperture. Under tuner and per-layer loss, the goal-oriented designs keep their advantage.

0.25

Stacked Intelligent Metasurface-Diffractive Deep Neural Networks for Onboard Terrain Classification from SAR Level-0 Raw Data

eess.SP ·2026-09-28 ·Mengbing Liu, Xin Li, Jiancheng An, Chau Yuen
top venue similarity 0.56
Abstract · Accepted by IEEE Transactions on Signal Processing

Real-time terrain classification directly from Level-0 raw Synthetic Aperture Radar (SAR) data remains restricted by traditional digital-centric paradigms, where the processing of noisy, high-dimensional patches is hindered by computationally intensive processors and significant downlink latency. To address these fundamental limitations, this work establishes a new research paradigm for autonomous on-board sensing by proposing a Stacked Intelligent Metasurface-Diffractive Deep Neural Network (SIM-D$^2$NN). This architecture leverages the physical wave-propagation medium to offload inference tasks from digital processors to a physical device. By executing in-wave feature mapping, the SIM-D$^2$NN facilitates a move toward an integrated `compute-while-transmitting' framework, providing an alternative to the traditional `digitize-then-process' sequence. The multi-layer metasurface is positioned at the forefront of the satellite communication module. The initial layer modulates the raw SAR data through both amplitude and phase adjustments, where a 90$^\circ$ phase rotation is introduced as a lightweight but effective augmentation strategy to enhance robustness against noise and Doppler distortions. Subsequent layers learn variable phase shifts, enabling advanced feature mapping for the classification task. The classification results at the terrestrial station can be directly obtained based on the signal amplitude received at each antenna. This design reduces reliance on downlink bandwidth and high-power terrestrial computing, achieving performance around 90% in the binary task directly from real raw SAR data in terms of accuracy, precision, recall, and F1 Score. Therefore, our method helps bridge the gap between next-generation remote sensing tasks and in-orbit processing needs, paving the way for computationally efficient remote sensing applications.

0.40

Single-RF-Chain Multiuser Semantic Communications via Metasurface Modulation

eess.SP ·2026-09-23 ·Mingxiao Li, Wenhai Lai, Hei Victor Cheng, Kaiming Shen
similarity 0.56
Abstract

Multiuser transmission with multiple radio-frequency (RF) chains enables flexible spatial multiplexing but incurs increased hardware complexity and power consumption. A programmable metasurface (MTS) provides an alternative means of introducing spatial degrees of freedom with a single-RF-chain access point (AP). This paper proposes \emph{Semantic Prism}, an MTS-enabled framework for concurrently transmitting independent semantic messages to multiple users. Semantic Prism jointly maps multiuser semantic representations to a common AP-symbol sequence and a corresponding sequence of discrete MTS configurations, enabling each user to recover its intended message from the received signal sequence. This mapping is realized by a learning-based modulator that takes both the multiuser semantic representations and channel state information (CSI) as inputs, while accounting for the discrete phase-control constraint of the MTS. To facilitate practical deployment, we further develop a field-channel fine-tuning method that enhances robustness to CSI uncertainty. We successfully implement Semantic Prism on a 400-element MTS prototype with 2-bit phase control operating at 3.5-GHz. Field tests show that Semantic Prism substantially improves multiuser semantic reconstruction over the considered baselines and enables a single-RF-chain AP to concurrently serve up to seven users.

0.16

SPIRIT: Sparse Physics-Informed Inverse Rendering for SAR Imaging

cs.CV cs.AI ·2026-10-01 ·Yimeng Liu, Maolin Gan, Jingkai Lin, Jialuo Du, Mi Zhang +1 more
similarity 0.56
Abstract

Radio-frequency (RF) and wave-based imaging systems play a critical role in sensing under adverse conditions, but are fundamentally constrained by a trade-off between collection speed and spatial resolution. Reducing measurements to enable rapid collection of fragment geometric information across sensing dimensions, leading to highly non-injective inverse problems that destabilize conventional image-domain reconstruction and super-resolution methods. Synthetic aperture radar (SAR) exemplifies this challenge in sparse-aperture sampling. We introduce SPIRIT, a physics-informed inverse rendering framework for sparse-aperture SAR. Rather than enhancing formed images, SPIRIT reconstructs an explicit three-dimensional surface. By adopting an optimization strategy and explicitly modeling visibility, phase coherence, and wave propagation, SPIRIT aggregates distributed geometric features across sparse aperture views into a coherent reconstruction. Extensive experiments on synthetic and real-world data demonstrate that SPIRIT recovers accurate geometry and signal under extreme sparsity, reducing data collection by over 90% while achieving low geometric and signal error and consistently outperforming baselines.

0.17

Enabling Emergency Communication via Semantic Radar-Centric ISAC

cs.NI ·2026-09-06 ·Mohaimin Al Barat, Chaoyu Zhang, Hexuan Yu, Kai Zeng, Y. Thomas Hou +1 more
published similarity 0.56
Abstract · 6 pages, 1 figure, 5 tables. Accepted by IEEE MILCOM 2026

Combat aircraft and other modern military platforms field two co-located RF assets: a radar for sensing and a dedicated radio for communication. In contested battlefield environments, however, the dedicated communication path is highly likely to be targeted and disrupted by jamming, blockage, or physical damage, while the radar remains fully operational. A natural fallback is to repurpose the surviving radar aperture as an emergency communication channel. The difficulty is that radar is purposely engineered for sensing rather than communication, so loading any information onto its waveform perturbs the beampattern and inevitably erodes sensing performance: the more bits we push, the more sensing we lose. We identify the core problem as enabling emergency communication via a radar-centric integrated sensing and communication (ISAC) link while preserving the radar's primary sensing function. Therefore, we propose a semantic radar-centric ISAC framework that pairs a learned vector-quantized semantic encoder, which compresses task-relevant content into a few tens to a few hundred bits, with a wideband phased-MIMO radar restricted to a conservative spatial-spectral configuration subset that respects a bounded sensing-degradation budget. Experiments on SAR target classification and text classification show that our framework supports reliable emergency communication for downstream tasks while keeping the radar beampattern almost unchanged.

0.38