CS Paper Radar

Multi-Label Classification with Constrained Search for Inverse Design of a 16x16 Reconfigurable Pixel Antenna

Nadeem Rather, Holger Claussen, Lester Ho

eess.SP ·submitted 2026-11-11 10:24 UTC · v1

Abstract

In this paper, an inverse design method is presented for a 16x16 reconfigurable pixel antenna with 480 binary switches, giving 2480 possible patterns, far beyond what full-wave simulation can explore. Given a target frequency between 1 and 6 GHz, the method searches for a switch configuration whose simulated resonance lies close to the target. A forward surrogate model is trained on 22,152 full- wave simulated patterns to predict where a given switch pattern resonates. The forward task is formulated as multi-label classification over 100 frequency bins rather than reflection-coefficient regression, because a curve-fitting objective is dominated by the flat baseline around the narrow resonances of this structure. The inverse design is a simulated annealing search over the switch state, with a connectivity constraint maintained at every step so that every pattern generated is a valid antenna. The proposed methodology combines resonance-focused surrogate modelling with connectivity-constrained discrete optimization, enabling candidate generation without full-wave solver calls during the search. The pipeline is verified in CST Microwave Studio by simulating 220 predicted candidates, ten for each of 22 target frequencies. For each request, the best of the ten candidates reached a median frequency error of 23 MHz across the 22 targets, compared with 35 MHz for a solver-guided search using 200 simulations for each target. The proposed methodology therefore enables automatic switch configuration to achieve a requested resonant frequency, eliminating solver calls during the search and manual redesign of the antenna geometry.

Closest papers

Nearest neighbours by meaning across the whole index.

Machine Learning Assisted Inverse Design of Pixelated mmWave Patch Antennas

eess.SP cs.AI ·2026-08-24 ·Nadeem Rather, Holger Claussen, Lester Ho
published similarity 0.66
Abstract

A machine learning-assisted framework for the inverse design of pixelated millimetre-wave patch antennas targeting the 22--30 GHz band is presented. The antenna surface is represented as a 19x23 binary pixel grid on a Rogers RT/duroid 5880 substrate, where each pixel is either metal or empty, with a continuous electrical path from the feed enforced by design. An initial dataset of approximately 6,000 full-wave CST simulations was collected from structured random pixel patterns, of which only around 40% achieved a resonance with |S11| <= -10 dB anywhere in the band, resulting in an imbalanced dataset. To improve simulation efficiency, an XGBoost binary classifier was trained on this data to distinguish resonant from non-resonant patterns before simulation. Using the classifier as a pre-simulation filter, an additional 4,000 patterns were selected and simulated, raising the overall proportion of resonant designs in the combined 10,000-sample dataset from approximately 40% to 52%. A hybrid CNN-BiLSTM forward surrogate was then trained on this augmented dataset to predict the full complex S11 response across 801 frequency points, using a physics-guided composite loss that explicitly emphasises resonance dip accuracy. Finally, an inverse design model was developed that optimises in a compact 64-dimensional latent space using gradient descent to generate pixel patterns matching a desired S11 specification. The results show good agreement between the surrogate-predicted and CST-simulated |S11| responses for the generated designs and demonstrate the feasibility of automatically designing and reconfiguring antenna structures.

0.45

Multi-Solution Inverse Design of Pixelated Patch Antennas Using an Autoregressive Transformer

cs.LG ·2026-10-29 ·Young-Mok Yun, Seung-Won Shin, Jaeyong Chung, Kyung-Sik Choi
similarity 0.66
Abstract · 16 pages, 28 figures, 7 tables

Deep-learning-based inverse design has emerged as a promising framework for pixelated patch antenna synthesis by enabling broader exploration of discrete geometry spaces and reducing design time compared with conventional template-based methods. Existing methods, including surrogate-assisted metaheuristic optimization, tandem inverse networks, and diffusion models, have advanced the field but still face practical limitations. Metaheuristic methods such as binary particle swarm optimization (BPSO) are sensitive to initialization and search hyperparameters and are often time-consuming, tandem networks have difficulty capturing the one-to-many nature of inverse antenna design, and diffusion models may require excessive complexity and data for moderate-scale binary layout synthesis. In this paper, an autoregressive (AR) transformer is presented for the inverse design of 10 x 10 pixelated patch antennas. Its sequential discrete generation process enables the synthesis of multiple feasible structures for a given target response. The pretrained model is further fine-tuned for dual-band design using step-shaped target responses with sharp spectral transitions, allowing intuitive band specification without manually constructing detailed S11 curves. Compared with BPSO, our proposed method generates valid and diverse antenna candidates more efficiently. Fabricated and measured examples confirm that distinct pixelated layouts can realize the desired antenna responses, thereby demonstrating the multi-solution capability of the proposed framework.

0.25

End-to-End Neural Modeling of EM Response and Design Performance for Free-Form RFIC Passives

eess.SP cs.LG ·2026-10-25 ·Yuhao Mao, Chenhao Chu, Martin Vechev, Hua Wang
publisheddatasetcode/data similarity 0.56
Abstract · NeurIPS'26

Passive matching networks are critical components in radio-frequency integrated circuits (RFICs), but their design is bottlenecked by expensive finite-difference-based electromagnetic (EM) simulation. We propose an end-to-end neural framework for free-form RFIC passives that predicts both EM response and downstream design performance under varying frequency and circuit contexts, combining a frequency-conditioned neural simulator with a circuit-conditioned neural solver. To improve design performance prediction, the simulator outputs a neural EM response consisting of both the explicit EM response and a complementary response, together with a dependence regularizer that encourages the two responses to capture orthogonal information. To evaluate the proposed framework, we construct a large-scale dataset of free-form passive layouts, synthesized from both expert-designed contours and random paths. Our 21M-parameter model achieves high accuracy across a broad frequency range, circuit contexts and passive matching settings, with $R^2>0.98$ for almost all targets, while providing orders-of-magnitude faster evaluation than traditional EM simulation. Code available at https://github.com/ETH-IDEAS/RFIC-NeuralSim.

0.37

K-TRAIL: Simulator-Guided Generative Design of EM/RF Circuits

cs.LG ·2026-09-19 ·Piyush Saha, Evan Newell, Hanna O'Leary, Arun Natarajan, Alireza Aghasi
similarity 0.53
Abstract

Inverse design of RF and electromagnetic (EM) circuits is challenging because the relationship between circuit layout and electrical response is non-unique, and full-wave simulation is computationally expensive. This paper presents K-TRAIL, a simulator-guided generative framework for automated EM/RF circuit synthesis. K-TRAIL combines diffusion-based layout generation with derivative-free ensemble Kalman guidance, allowing feedback from a black-box EM simulator to refine candidate layouts during generation without requiring adjoint sensitivities or differentiable solver models. The framework supports both synthesis from prescribed S-parameter responses and synthesis directly from RF performance constraints. Experiments on multi-layer RFIC structures show that simulator-guided generation improves agreement with target responses and can identify structurally distinct layouts that satisfy circuit-level design requirements. The proposed approach provides a practical path toward generative, verification-aware RF circuit design while retaining the flexibility to explore diverse layout topologies.

0.52

Joint EM-BB Beamforming Design for ISAC Systems With Reconfigurable Antenna Arrays

eess.SP ·2026-10-06 ·Jvxiang Hu, Mengzhen Liu, Rang Liu, Qian Liu, Ming Li
benchmark similarity 0.53
Abstract · 6 pages, 4 figures, conference

This paper investigates the joint electromagnetic (EM)-domain and baseband (BB)-domain beamforming for integrated sensing and communication (ISAC) systems enabled by pattern- and polarization-reconfigurable pixel-antenna arrays. A multiport-network-based antenna model is developed to map each binary switch configuration to its radiation response using the impedance and open-circuit radiation data extracted from Computer Simulation Technology (CST) Studio Suite simulations. Based on this model, polarization-aware virtual channels are constructed for downlink communication and statistical target sensing, leading to a mixed-integer nonconvex problem that maximizes the average sensing signal-to-noise ratio (SNR) subject to user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. To handle the coupled binary and continuous variables, we propose an alternating optimization algorithm, in which the EM-domain switch-state matrices are updated using successive exhaustive Boolean optimization (SEBO), the BB-domain precoder is optimized via a minorization-maximization (MM) and second-order cone programming (SOCP) procedure, and the sensing combiner is obtained from a Rayleigh-quotient update. Simulation results show that the proposed design achieves higher sensing SNR and stronger target-angle robustness than the fixed-patch benchmark.

0.30

Band-Selective Microwave Cavity Optimization Using Differentiable FDTD: Gradient-Guided Search Versus Structured Random Search

eess.SP ·2026-08-20 ·Hasan Yiğit, Kutlu Karayahşi
benchmarkunusual similarity 0.52
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

We compare gradient-based inverse design with structured random search for dielectric-loaded microwave cavities using an in-house JAX-based differentiable FDTD solver. The benchmark fixes material fraction, filtered density representation, initialization, band-energy objective, and measured selection wall time. Each selected design is evaluated in a separate 8000-step FDTD simulation. Across four target bands, three prescribed material fractions, and six seeds, gradient optimization achieves a higher in-band spectral-energy fraction in all 72 paired comparisons. The mean paired improvement is 0.356, with a 95 percent paired bootstrap interval of 0.339-0.374 and an exact two-sided sign-flip p value of 0.03125. Gradient, cavity-mode, CFL, material-fraction, and raw-output integrity checks pass before inference. Under matched material and computational budgets, the results support an advantage for gradient-based optimization in this cavity-design benchmark.

0.28

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.52
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

Diffusion-Based Inverse Design of Dielectric Resonator Metasurfaces for Shaping Smart Electromagnetic Environments

cs.LG physics.app-phphysics.comp-ph ·2026-08-30 ·M. Tsukerman, K. Grotov, D. Vovchuk, P. Ginzburg
similarity 0.52
Abstract

Future wireless systems are expected to transform the surrounding space from a passive propagation medium into a smart electromagnetic environment, where engineered surfaces control wave propagation, support wireless sensing, and create programmable electromagnetic fingerprints. A key challenge in realizing this vision is the inverse design of metasurfaces for tailored electromagnetic propagation. While forward analysis evaluates the response of a known geometry, the inverse task starts from a prescribed scattering signature and seeks a physically realizable structure that produces it. This inverse task is inherently nonlinear and often high-dimensional, while candidate solutions may be non-unique and provide no direct indication of practical realizability. Here, we introduce a conditional diffusion framework for inverse design of dielectric resonator metasurfaces from target angular scattering patterns. Trained on T-matrix simulated geometry-response pairs, the model learns a conditional distribution of geometries instead of a deterministic mapping, enabling multiple candidate designs for the ill-posed inverse problem. The best generated metasurface achieves a mean percentage error of 1.39%, outperforming CMA-ES optimization (4.1% after 10 h) while requiring only about one minute for after-training inference. The model also produces lower error distributions than deterministic neural baselines for out-of-distribution spectra, highlighting the potential of diffusion models for efficient metasurface design.

0.28