CS Paper Radar

VISTA: View-Independent micro-Doppler Reconstruction with Multistatic ISAC

Jacopo Pegoraro, Marco Canil, Aurora Peloso, Jesus O. Lacruz, Xitao Gong, Richard A. Stirling-Gallacher, Michele Rossi, Joerg Widmer

cs.AR ·submitted 2026-11-11 23:13 UTC · v1
published

Abstract

The micro-Doppler (uD) spectrum provides detailed characteristics of target movement, making it highly valuable for applications such as target classification and human activity recognition. However, traditional Integrated Sensing And Communication (ISAC) systems are highly view-dependent and limited by blind spots and angle dependencies. Existing approaches rely on either configuration-specific solutions or data-driven models. The former results in poor generalization when device deployments or target orientations change, while the latter requires acquiring extensive multi-view datasets, which is time-consuming and not always feasible. To address these limitations, in this work we propose VISTA, a novel method for reconstructing the uD spectrogram in an absolute coordinate frame, yielding view-independent Doppler features that are invariant to the spatial distribution of ISAC nodes. We formulate the uD estimation as a sparse reconstruction problem that jointly leverages measurements from all ISAC receivers. This is solved using a modified Orthogonal Matching Pursuit (OMP) algorithm, which iteratively alternates between jointly selecting candidate velocity vectors across all receivers (RXs) and independently estimating the complex channel gain amplitudes for each RX. Our results show that, provided sufficient spatial diversity, VISTA successfully reconstructs the targets' absolute uD spectrograms with a median error \leq 0.69 m/s for speeds \leq 15 m/s.

Comment
Accepted to be presented in the IEEE ISAC 2026 conference

Closest papers

Nearest neighbours by meaning across the whole index.

Micro-Doppler Sensing for UAV Flight-State Estimation in ISAC Networks

eess.SP ·2026-10-15 ·Henglin Pu, Lu Su, Zhu Han, Athina P. Petropulu, Husheng Li
similarity 0.66
Abstract

Integrated sensing and communication (ISAC) provides a promising foundation for low-altitude unmanned aerial vehicle (UAV) monitoring. However, most existing studies focus primarily on position and bulk velocity, thus providing limited information about UAV rotor dynamics and orientation. To address this limitation, this paper develops an orthogonal frequency-division multiplexing (OFDM)-ISAC framework that exploits UAV micro-Doppler signatures to estimate operational states, including rotor rate and rotor-axis orientation, thereby providing richer UAV state information beyond conventional ISAC localization and velocity sensing. The framework progresses from single-station micro-Doppler sensing to multi-station rotor-axis estimation. At each base station, micro-Doppler signatures are first extracted and used to estimate the rotor rate. The framework is then extended to a distributed ISAC network, where view-dependent micro-Doppler signatures from multiple sensing directions are fused to estimate the common rotor-axis direction. Since the fusion relies on Doppler-bandwidth features rather than complex channel phases, inter-station carrier-phase synchronization is not required. We show that three geometrically diverse views can locally identify both the rotor-axis direction and the unknown rotor-tip-speed scale. In addition, a feature-aware radar equation bridges blade radar cross section (RCS), sensing range, transmit power, and observation duration to micro-Doppler detection and rotor-rate estimation accuracy. The effects of residual motion and range migration on the coherent processing interval (CPI) are also analyzed. Simulations and experimental measurements validate the proposed framework and demonstrate the feasibility of rotor-rate estimation and multi-station rotor-axis sensing.

0.22

Reliable Doppler Estimation in Asynchronous Moving ISAC Devices via IMU Integration

eess.SP ·2026-09-30 ·Zaman Bhalli, Jacopo Pegoraro, Gianmaria Ventura, Paolo Casari, Michele Rossi
similarity 0.62
Abstract · 6 pages, 5 figures. Submitted to IEEE VTC2027-Spring

We present an Integrated Sensing And Communication (ISAC) framework for the joint estimation of the Doppler frequency of a passive mobile target in a bistatic scenario with clock-asynchronous nodes and where the Receiver (RX) is static but the Transmitter (TX) is mobile. In such a setup, previous geometric solutions are integrated with an Inertial Measurement Unit (IMU) device at the TX, coming up with a truly joint data fusion and estimation algorithm based on extended Kalman filtering. The approach jointly estimates the target Doppler frequency, along with the speed and direction of motion of the TX and it is robust to the unavailability of static paths between the TX and RX pair, a condition that makes previous solutions ineffective. The developed extended Kalman filter strikes a balance between the accuracy of ISAC and the IMU reliability. The proposed solution is validated via numerical simulations, obtaining a median Doppler error of 1.2% with a smartphone-grade IMU under realistic operating conditions.

0.36

Practical Hardware-Efficient ISAC: Enabling Multi-Target Sensing With Few RF Chains

eess.SP ·2026-10-12 ·Zhenkun Zhang, Cunhua Pan, Hong Ren, Jun Tang, Dongming Wang +1 more
theory similarity 0.62
Abstract

Hybrid analog--digital arrays reduce hardware cost in integrated sensing and communications (ISAC), but spatial compression and beam-dependent scan responses complicate multi-target estimation with few radio-frequency (RF) chains. To address these challenges, this paper proposes a burst beam-scanning multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) framework that reuses downlink reference signals for joint range, radial-velocity, elevation, and azimuth estimation. Specifically, a structured global--local dual-tensor estimator separates targets by using scanning observations and refines their parameters from selected-beam RF-chain responses, with delay--Doppler signatures maintaining cross-stage target correspondence. The recovered subarray responses yield closed-form elevation and azimuth estimates through exact sum--difference relations, avoiding small-angle approximations and fine angular grid searches. To further improve Doppler accuracy, spatial-mask-aided weighted least squares exploits the longer inter-burst temporal aperture while resolving phase ambiguity using intra-burst estimates. The joint multi-target Cramér--Rao lower bound (CRLB) and corresponding three-dimensional (3D) positioning bound are also derived to characterize estimation performance. Simulation results show that the proposed scheme achieves near-CRLB estimation accuracy at high transmit powers and centimeter- to millimeter-level 3D positioning with only four RF chains, while maintaining low computational cost.

0.12

RadPose: ISAC-based RF 3D Human Pose Estimation

cs.CV cs.NI ·2026-11-01 ·Geo Jie Zhou, Kunzhe Song, Ruxin Lin, Huacheng Zeng
publishedcode/data similarity 0.61
Abstract · Accepted to WACV 2027

Human pose estimation under adverse lighting and occlusion conditions remains challenging for camera- and LiDAR-based systems. Although mmWave radars provide robustness to illumination and occlusion, they rely on dedicated hardware and licensed spectrum, limiting scalability. In this paper, we present RadPose, a learning-based monostatic integrated sensing and communication (ISAC) framework that enables mmWave communication devices to perform 3D human pose estimation. Unlike specialized radars, RadPose leverages monostatic full-duplex operation to extract channel impulse responses (CIRs) directly from standard OFDM communication signals, generating 3D radio point clouds without additional sensing hardware. To address the sparsity and noise of RF observations, RadPose employs a cross-frame transformer-based pose inference network with semantic-guided spatial attention and target-driven temporal attention for robust spatio-temporal aggregation. It further adopts a joint-aware inverse kinematics refinement module based on graph convolution to enforce skeletal topology, bone-length consistency, and anatomical plausibility. Extensive experiments demonstrate RadPose achieves competitive accuracy compared to state-of-the-art radar-based approaches while maintaining robust performance in unseen and occluded scenarios. The dataset and source code are available at https://github.com/Geo-Chou/RadPose.

0.46

Ghost Target Elimination in 5G Reference Signals ISAC via Multi-static Multilateration

eess.SP ·2026-11-04 ·Ali Al Khansa, Sami Mekki
benchmark similarity 0.61
Abstract

Integrated Sensing and Communication (ISAC) systems can reuse 5G New Radio (NR) reference signals to enable joint communication and environmental sensing. Among these signals, the Positioning Reference Signal (PRS) is particularly suitable for range and Doppler estimation. However, its comb structure introduces periodic ambiguities that generate ghost targets. Existing solutions resolve these ambiguities by combining PRS with additional signals such as the DeModulation Reference Signal (DMRS), which increases sensing overhead. This paper proposes a PRS-only sensing framework that resolves ambiguities using multi-static observations. Instead of removing ghosts locally at each receiver, the proposed method exploits spatial diversity and performs ambiguity resolution at a fusion anchor. The anchor jointly estimates target locations and ambiguity indices via multilateration across multiple sensing nodes. This approach eliminates the need for additional reference signals while maintaining low receiver complexity. Simulation results show that the proposed method reliably resolves ghost targets and achieves superior detection performance compared to benchmark methods across various scenarios, while significantly enhancing resource efficiency by enabling sensing using PRS-only transmissions.

0.34

Learning Nonlinear Waveform Fusion Across Scales for Integrated Sensing and Communication

cs.AI ·2026-10-23 ·Jiayu Liu, Kai Wan, Shuo Shao, Giuseppe Caire
similarity 0.60
Abstract

Fixed source superposition and frequency partitioning constrain how communication content interacts with a probing reference in integrated sensing and communication (ISAC). We learn nonlinear waveform fusion across scales for image transmission and localization of multiple targets in range and angle. Reception uses the information available at each end. Adaptive temporal feature weighting and spectral updates combine image features and a deterministic linearly frequency-modulated reference in a shared complex state, generating a waveform with fixed total energy over the array frame. At the user equipment (UE), the reference and channel state information condition a neural demixer for image reconstruction. At the base station, the realized transmit pulse defines a coherent dictionary for sequential localization with learned local correction, physical refinement, and residual updates. We compare the proposed waveforms with superposition in the time domain and learned spectral linear fusion on 512 independent test images, using a shared fixed UE receiver and a baseline sensing receiver using coherent peak search. Averaged across eleven task weights, the proposed waveforms reduce normalized localization error by 29.0\% and 27.0\%, respectively, while increasing mean peak signal-to-noise ratio by 1.40 and 0.82~dB. With the proposed waveforms fixed, learned local correction reduces mean normalized localization error by 12.2\% relative to the same sequential receiver without learned correction.

0.20

Performance Evaluation of Mobile Target Sensing and Tracking Across Multiple Sensing Modes

eess.SP ·2026-10-10 ·Necati Kagan Erkek, Marco Di Renzo, Arman Shojaeifard, Kunjan Shah, Mohammad Heggo +1 more
similarity 0.60
Abstract

Moving extended-target sensing and tracking are studied in a beamformed PRS/OFDM ISAC framework. The target is modeled as a rigid cluster of scatterers whose Tx--target--Rx echoes coherently combine in a MIMO scattering channel. Delay, azimuth/elevation, and Doppler are estimated using PRS matched filtering with delay centroiding, single-cluster 2D-MUSIC, and FFT-based Doppler estimation, then used for independent localization and EKF-based tracking. The framework is evaluated in monostatic and bistatic modes under target-directed, receiver-directed, and omnidirectional beamforming. Simulation results show that EKF tracking reduces the aggregate 3D RMSE from 1.61 m to 1.38 m relative to independent localization. Target-directed beamforming substantially improves tracking accuracy, achieving 1.38 m RMSE compared with 5.91 m and 8.38 m for omnidirectional and receiver-directed beamforming, respectively. The results highlight the importance of target-aware beam management, delay-angle-Doppler fusion, and sensing geometry for mobile-target tracking in ISAC networks.

0.35

Low-Complexity Neural Pursuit for Line Spectral Estimation

eess.SP ·2026-09-19 ·Chenchen Liu, Wenjun Jiang, Xiaojun Yuan
top venuetheory similarity 0.58
Abstract

In this paper, we propose a high-precision yet low-complexity framework, termed Neural Pursuit for Line Spectral Estimation (NeuPLSE), for off-grid line spectral estimation from a single snapshot. The proposed framework systematically integrates model-driven signal structures with data-driven adaptability, enabling continuous-domain spectral representation together with adaptive parameter learning. Within this framework, model order detection and spectral parameter estimation are jointly achieved through residual analysis, with coordinated use of global and generalized component-wise residual information to ensure robust and accurate estimation performance. Moreover, NeuPLSE supports a unified extension from one-dimensional (1D) to multi-dimensional (MD) scenarios while maintaining low computational complexity. Extensive simulations in representative integrated sensing and communication (ISAC) scenarios demonstrate that NeuPLSE achieves accurate model order detection and high-precision spectral estimation. In sparse-path settings, it approaches the Cramér-Rao lower bound, while in dense-path settings, it attains competitive reconstruction performance with significantly lower computational complexity than state-of-the-art methods.

0.36