CS Paper Radar

Clock Distribution Network with Backside Clock Mesh in BSPDN Architecture

Seohyun Kim, Youngjin Chae, Shilong Zhang, Youngsoo Shin

cs.AR ·submitted 2026-11-16 02:21 UTC · v1
top venue

Abstract

We propose a clock distribution network (CDN) in which the clock mesh is located on backside metal (BM) layers, while the rest of the network remains on the frontside. Since the backside power distribution network (BSPDN) also uses the BM layers, the clock mesh and power network must share them. We identify an important problem of placing mesh receivers while accounting for keep-out zones (KOZs) between clock- and power-nTSVs. We show that this problem can be solved using a potential-field method (PFM). Machine learning models are developed to place the mesh receivers: a U-Net predicts their initial positions, and an MLP predicts force weights for PFM-guided position refinement. Both models are trained through self-supervised learning by optimizing a differentiable objective that accounts for clock latency, IR-drop, and KOZ violations. Experimental results show that, on average, the proposed CDN reduces maximum local clock latency by 26%, global clock skew by 40%, and mesh switching power by 29% compared with a frontside CDN. On the same backside CDN, ML-guided PFM satisfies KOZ constraints while lowering IR-drop by 33% and requiring 85% fewer iterations than standard PFM.

Comment
Accepted to ASP-DAC 2027
DOI
10.1145/3840404.3848262

Closest papers

Nearest neighbours by meaning across the whole index.

A Surrogate Model for Variation-Aware Clock-Mesh Analysis and Design-Space Exploration using Graph Neural Networks

cs.AR cs.LG ·2026-11-01 ·Muhammad Hadir Khan, Wajid Ali, Arya Thottiparambil Manikandan, Matthew Guthaus
similarity 0.61
Abstract

Clock meshes are widely used in high-performance VLSI systems to minimize skew and tolerate On-Chip Variation (OCV) in nanometer technologies. However, analyzing meshes is difficult because reconvergent paths and multi-source drivers prevent static timing analysis (STA) tools from handling mesh loops, making SPICE the industrial standard. SPICE simulations are accurate but slow, so clock-mesh synthesis relies on approximate models that overlook critical effects such as non-linear buffer driving caused by input slew and input skew. We propose a Graph Neural Network (GNN) based surrogate model of the clock mesh with a new graph representation and a new architecture that predicts power while also improving the delay and slew predictions at the sinks and capturing the skew histogram under OCV. Trained on SPICE data and tested on unseen real designs, our model achieves average errors of $3.40$~ps in delay, $4.14$~ps in slew and $4.46$~ps in skew, compared with $6.28$~ps, $12.35$~ps, and $11.62$~ps for our prior model, and $74.37$~ps delay and $27.51$~ps skew for the approximate method used in current state-of-the-art works. Our model predicts power within $3.4\%$ of SPICE on average, while delivering $18\times$-$1706\times$ speed-ups over the approximate method under OCV modeling, enabling faster and more accurate clock-mesh design-space exploration. A case study on a real design further shows that our surrogate model finds buffering candidates that, at a balanced tradeoff, improves $99^{\text{th}}$-percentile skew by $49.1\%$, reduces power by $25.7\%$, and reduces area by $37.3\%$ at the cost of a $6.8\%$ increase in $99^{\text{th}}$-percentile maximum slew as compared to the state-of-the-art work.

0.21

Design Space Exploration of Backside Clock Meshes for 2 nm GAAFET BSPDN Technology

cs.AR ·2026-10-01 ·Wajid Ali, Muhammad Hadir Khan, Dalton Gaddy, Matthew Guthaus
similarity 0.58
Abstract

Clock meshes are used in high-performance VLSI designs to minimize skew and tolerate on-chip variation, but they spend scarce routing resources on premium metal layers. Backside power delivery creates a new option: it adds thick, low-resistance metal layers on the back of the wafer, and the power grid does not consume all of them. Flip-flops remain on the frontside; a backside mesh therefore cannot drive them directly, and every connection passes through a through-silicon via. We present the first design-space exploration of backside clock meshes, implemented in OpenROAD on GT2N, a 2 nm nanosheet technology. Four benchmarks (1,938 to 15,311 flip-flops) are explored with multi-objective Bayesian optimization, and every design point is verified by transistor-level SPICE simulation, since the cyclic mesh cannot be evaluated by static timing analysis. Across all four designs, the backside mesh consistently outperforms an identical frontside mesh, with on average 45% lower skew, 25% lower sink slew, 4.5% lower power, and 28% less frontside clock wiring, and its skew spread under 10,000-sample Monte Carlo is a third of the frontside mesh's.

0.28

Energy and Latency First: How Deployment Constraints Reverse Time-Series Model Selection

cs.LG ·2026-10-22 ·Shruti Bothe, Illyyne Saffar, Ayush K. Varshney
publishedbenchmark similarity 0.54
Abstract · 13 pages, 1 figure

AI models, and time-series models in particular are typically ranked by accuracy and deployed under constraints absent from that ranking. In this paper, we study a real setting where these constraints are explicit and measurable: handover pre- diction in cellular networks, where inference runs on the User Equipment once per 40 ms measurement period and must complete before the network acts. The timing bound is hard: a late prediction is superseded by the measurement it was predicting, while energy is a cumulative budget spent for the life of the device. Neither appears in the objective these models are selected on. We evaluate eight architectures under a protocol that screens for deadline feasibility at the tail rather than the mean, then ranks the feasible models on measured inference energy, count- ing the feature computation that precedes the forward pass and is usually omitted. Gradient-boosted trees on handcrafted temporal features are the most accurate model (F1=0.974) and among the cheapest to run, while the neural architecture an accuracy-only benchmark would rank first (CNN-1D, F1=0.914) costs over 3 times more energy per inference under a realistic duty-cycled deployment pattern. We give three conditions under which this outcome should be expected, so the finding applies beyond telecommunications. Accuracy-only benchmarking does not merely under-report deployment cost. It can rank first a model that cannot be deployed.

0.31

Towards Easier-to-Tune Training Algorithms: New Results from AlgoPerf

cs.LG ·2026-10-09 ·Priya Kasimbeg, Ahmed Khaled, Aahlad Chandrabhatta, Yifan Wang, Andy Liu +7 more
benchmark similarity 0.51
Abstract

Evaluating deep learning optimizer is challenging because confounding factors such as hyperparameter tuning and optimizer-model co-design often obscure true algorithmic performance. We present results of the updated AlgoPerf V1 benchmark, in which we evaluate a new set of training algorithms on wall-clock time-to-target across nine workloads on fixed hardware. This report focuses on the results of the benchmark's self-tuning ruleset, which requires submissions to use a single configuration across all workloads. Out of the 13 submissions in PyTorch and JAX, Schedule-Free AdamW ranked first. In addition to the wall-clock scores, we also analyze the trade-offs between step efficiency and wall-clock execution, revealing that matrix-preconditioned and two-loop methods achieve good sample efficiency but require more aggressive computational optimizations to be competitive in runtime. Finally, our hyperparameter saliency and retention analyses show that the learning rate and momentum are highly sensitive across domains and algorithms, highlighting the need for methods that are more robust against hyperparameter tuning and can generalize well to new tasks.

0.11

From Least Squares to Deep Learning: Benchmarking Indoor Positioning on the HYMN Multi-Technology Dataset

eess.SP ·2026-09-22 ·Paul Schwarzbach, Muhammad Ammad
publishedcode/data similarity 0.50
Abstract

Indoor positioning benchmarks rarely co-locate multiple technologies with high-accuracy ground truth, limiting cross-method and cross-technology comparison. We evaluate four range-based positioning methods on fused Ultra-wideband, Bluetooth Low Energy, and WiFi ranges recorded at 48 reference points in an industrial facility with available ground truth. The evaluated methods range from least-squares positioning, with and without robust weighting, through a Bayesian grid filter to a ResNet regressor that we report under two protocols, interpolation and spatial generalisation. Per-technology ranging quality spans roughly two orders of magnitude, which caps any geometry-based solver that weighs anchors equivalently. On fused input the grid filter is competitive with deep learning on median error, while the ResNet's advantage concentrates on the upper tail. Holding reference points out of training increases the learned regressor's median error several-fold, exposing a spatial-generalisation penalty invisible under random splits. The dataset and evaluation code are publicly available.

0.28

Dynamic Slack-Aware Clocking for Near-Threshold Tensor Processing Units (TPUs)

cs.AR ·2026-09-22 ·Muhammad Usman Nadeem, Sanghamitra Roy, Koushik Chakraborty
top venue similarity 0.49
Abstract · 31 pages, 13 figures. Accepted manuscript of ACM Transactions on Design Automation of Electronic Systems (TODAES); DOI: 10.1145/3837085

Operating Tensor Processing Units (TPUs) in the near-threshold computing (NTC) region significantly reduces energy consumption but introduces high delay sensitivity to process variation and data activity. Conventional designs typically rely on a conservative, fixed global clock to ensure safety, which leaves large portions of timing margin unexploited as most operations finish well before the clock edge. We propose Dynamic Slack-Aware Clocking (DSAC), a proactive framework that replaces worst-case timing with operation-specific adjustments. DSAC employs lightweight Hamming-Distance, Most-Significant-Bit, and Hybrid predictors to estimate the delay sensitivity of individual multiply-accumulate (MAC) operations and classify them into three timing tiers. These tiers are enforced locally via dummy-hold cycles under a fixed global reference clock, enabling fine-grained timing adaptation without global clock retuning or frequency scaling. A closed-loop feedback controller monitors timing violations and updates tier thresholds at runtime to maintain resilience. Experiments on quantized DNN benchmarks demonstrate that the MSB predictor maintains high inference accuracy, with an average loss of only 1% even at aggressive performance points. Furthermore, DSAC achieves up to 1.55X better energy efficiency at 2.15X frequency scaling compared to a baseline TPU, while incurring an area overhead as low as 13%.

0.40

Performance of Neural Operator Baselines on 'The Well' Dataset

cs.LG ·2026-10-25 ·Yash Pincha, Andy Dimnaku, Andrew Chiang, Adarsh Ganeshram, Valentin Duruisseaux +1 more
benchmark similarity 0.49
Abstract

The Well, a 15-terabyte dataset spanning 16 physical simulation domains, provides an extensive benchmark for developing and evaluating machine learning surrogate models for complex physical systems. The baselines released with the benchmark were presented by their authors as illustrative examples obtained at small computational cost, trained with zero to very limited hyperparameter tuning and under a highly constraining 12-hour per-run wall-clock limit. These results have subsequently been treated as fully tuned benchmarks, and in some cases effectively interpreted as unconstrained performance baselines. We perform a short non-exhaustive hyperparameter search for the Tucker-factorized Fourier Neural Operator (TFNO) under the same 12-hour per-run wall-clock limit, while using only a single input timestep rather than the history of up to four used by the published baselines. Despite this more restrictive setup, tuning alone reduces VRMSE below both published FNO and TFNO baselines on 15 of 17 tasks, sometimes by several orders of magnitude. This sensitivity to a modest tuning effort underscores that the released neural operator baselines should not be treated as architectural benchmarks.

0.12

X-OPM: Explainable Automatic Digital On-Chip Power Modeling for Enhanced Robustness

cs.AR cs.AIcs.LG ·2026-10-06 ·Jingbo Jiang, Xizi Chen, Jian Peng, Wei Zhang
similarity 0.48
Abstract

Proactive power management systems reduce processor dynamic power through runtime power prediction and power-aware scheduling. Accurate, stable and low-overhead digital on-chip power meters (OPMs) are crucial for improving the prediction quality. Recent studies have explored various modeling methods, including using linear models, decision trees, and multi-layer perceptrons (MLPs) to construct OPMs. However, most current approaches train models end-to-end without analyzing the physical interpretability of features, affecting their ability to generalize to unseen workloads. Grounded in the design principles of synchronous digital VLSI circuits, X-OPM introduces a robust feature engineering framework that uses tree-based models to capture feature interactions and linear models for prediction. It also incorporates a human-in-the-loop workflow to balance model accuracy against modeling effort. Evaluated on a commercial C906 vector processor, X-OPM consistently achieves $R^2 > 0.93$ across all workloads with sampling window size set below $8$ cycles. In contrast, state-of-the-art methods including APOLLO, COBIT, and standard MLPs fail to generalize across all test cases. Layout with commercial EDA tools shows that X-OPM incurs an area overhead below $0.1\%$, which is on par with lightweight tree-based and linear models, and significantly smaller than MLP-based models.

0.20