CS Paper Radar

Design Space Exploration of Backside Clock Meshes for 2 nm GAAFET BSPDN Technology

Wajid Ali, Muhammad Hadir Khan, Dalton Gaddy, Matthew Guthaus

cs.AR ·submitted 2026-10-01 19:28 UTC · v1

Abstract

Clock meshes are used in high-performance VLSI designs to minimize skew and tolerate on-chip variation, but they spend scarce routing resources on premium metal layers. Backside power delivery creates a new option: it adds thick, low-resistance metal layers on the back of the wafer, and the power grid does not consume all of them. Flip-flops remain on the frontside; a backside mesh therefore cannot drive them directly, and every connection passes through a through-silicon via. We present the first design-space exploration of backside clock meshes, implemented in OpenROAD on GT2N, a 2 nm nanosheet technology. Four benchmarks (1,938 to 15,311 flip-flops) are explored with multi-objective Bayesian optimization, and every design point is verified by transistor-level SPICE simulation, since the cyclic mesh cannot be evaluated by static timing analysis. Across all four designs, the backside mesh consistently outperforms an identical frontside mesh, with on average 45% lower skew, 25% lower sink slew, 4.5% lower power, and 28% less frontside clock wiring, and its skew spread under 10,000-sample Monte Carlo is a third of the frontside mesh's.

Closest papers

Nearest neighbours by meaning across the whole index.

A Surrogate Model for Variation-Aware Clock-Mesh Analysis and Design-Space Exploration using Graph Neural Networks

cs.AR cs.LG ·2026-11-01 ·Muhammad Hadir Khan, Wajid Ali, Arya Thottiparambil Manikandan, Matthew Guthaus
similarity 0.64
Abstract

Clock meshes are widely used in high-performance VLSI systems to minimize skew and tolerate On-Chip Variation (OCV) in nanometer technologies. However, analyzing meshes is difficult because reconvergent paths and multi-source drivers prevent static timing analysis (STA) tools from handling mesh loops, making SPICE the industrial standard. SPICE simulations are accurate but slow, so clock-mesh synthesis relies on approximate models that overlook critical effects such as non-linear buffer driving caused by input slew and input skew. We propose a Graph Neural Network (GNN) based surrogate model of the clock mesh with a new graph representation and a new architecture that predicts power while also improving the delay and slew predictions at the sinks and capturing the skew histogram under OCV. Trained on SPICE data and tested on unseen real designs, our model achieves average errors of $3.40$~ps in delay, $4.14$~ps in slew and $4.46$~ps in skew, compared with $6.28$~ps, $12.35$~ps, and $11.62$~ps for our prior model, and $74.37$~ps delay and $27.51$~ps skew for the approximate method used in current state-of-the-art works. Our model predicts power within $3.4\%$ of SPICE on average, while delivering $18\times$-$1706\times$ speed-ups over the approximate method under OCV modeling, enabling faster and more accurate clock-mesh design-space exploration. A case study on a real design further shows that our surrogate model finds buffering candidates that, at a balanced tradeoff, improves $99^{\text{th}}$-percentile skew by $49.1\%$, reduces power by $25.7\%$, and reduces area by $37.3\%$ at the cost of a $6.8\%$ increase in $99^{\text{th}}$-percentile maximum slew as compared to the state-of-the-art work.

0.21

Topology as a Design Variable: Joint Architecture-Sizing Optimization for SRAM

cs.LG ·2026-11-06 ·Can Wang, Junhao Ma, Yikai Wang, Shan Shen, Wei W. Xing
publishedcode/data similarity 0.63
Abstract · Accepted by ASPDAC2027

SRAM's power-performance-area-stability trade-off depends on bitcell topology, a discrete architectural choice that interacts non-separably with continuous transistor sizing. However, no open-source SRAM tool treats topology as an optimizable variable. OpenRAM generates SRAM layouts but performs no optimization, while OpenYield supports high-fidelity evaluation but restricts optimization to scalar sizing of a fixed 6T cell. OpenYieldV2 closes this gap through three integrated contributions. First, a fully parameterized compiler generates complete 6T and 10T SRAM macros with peripheral circuits and replica-bitline self-timing, enabling topology comparison under identical simulation conditions. Second, a few-shot TabPFN surrogate learns topology-dependent PPA responses with limited full-macro SPICE samples. Third, a coarse-to-refined multi-objective optimizer combines global exploration of discrete architectural choices with local refinement of continuous transistor sizes. Experiments across varying design conditions reveal a topology decision boundary that shifts with operating constraints rather than following a fixed design rule. Jointly optimizing across this boundary improves hypervolume by up to 17.3\% over the strongest single-topology baseline. OpenYieldV2 is open-source to support reproducible SRAM design research.

0.39

Reversing the Clock: Layout-Aware Recovery of Design Intent from Clock Distribution Networks

cs.CR ·2026-10-02 ·Sascha Tommasone, Zehra Karadağ, Christopher Pawlowicz, Michael Green, Bruno Machado Trindade +4 more
publishedcode/data similarity 0.62
Abstract · Accepted at the IEEE International Conference on Physical Assurance and Inspection of Electronics (PAINE) 2026

Hardware reverse engineering supports competitive analysis and hardware assurance by recovering information about an integrated circuit (IC) from its physical implementation. While existing techniques primarily recover the gate-level netlist, which represents logical functionality, they often overlook physical design decisions such as placement, routing, delay insertion, and interconnect optimization. The clock distribution network encapsulates many of these decisions; however, no prior published work has recovered this network from a fabricated IC to infer design intent. We present a layout-aware methodology that recovers and analyzes the clock distribution network by integrating a recovered gate-level netlist with layout information extracted from scanning electron microscope imagery. Our four-phase pipeline recovers clock-tree topology, buffering, gating and switching, interconnect delay, and crosstalk-mitigation measures. We demonstrate our methodology on a commercial 450 nm IC, recovering a global H-tree backbone with local X-tree-like branching, identifying an independent clock tree and global clock gating, quantifying latency, skew, and routing lengths, and confirming the absence of dedicated crosstalk mitigation. Together, these findings let us reason about the designer's intent. To encourage further research and support reproducibility, we release our clock tree recovery algorithm as open source.

0.45

Breaking the Myth of Four-Tier Stacked Transistors for Logic: an Investigation from Process to Device and Block-Level PPA

cs.ET cond-mat.mes-hall ·2026-11-18 ·Jianxiang Jin, Haoran Lu, Yihan Luo, Yanbang Chu, Yibo Zhang +11 more
similarity 0.60
Abstract · 4 pages,17 figures,conference

For the first time, this work evaluated whether 4-tier stacked transistors can translate the straightforward density gains into realistic chip-level scaling benefits. A practical dual-sided 4-tier transistor-stacking CFFET (Flipped CFET-to-CFET) process was proposed, on which a DTCO framework spanning standard-cell design, local interconnects, RO analysis, and physical implementation was built under 2A node design rules. The CFFET was also benchmarked with its 2-tier transistor-stacking counterparts FFET. Among CFFET configurations, the best-performing Symmetric Power still lags FFET by 11.2% in RO frequency due to the complex MOL parasitics. At the block level, CFFET reduces the Ibex RISC-V core area by only 12.8% (far below the 40% nominal cell-height reduction), while running 10.9% slower at iso-power. We further introduced a novel Tetris-like cell stitching to minimize the area overhead, which allows non-rectangular cell design and recovers 7.4% area in a 1-bit ALU design. An optimized NanoStack CFFET was finally proposed, inspired by previous work. This work indicates that straightforward vertical 4-tier stacking proves insufficient to guarantee enough PPA benefits, though the resulting design insights may guide future advanced architectures.

0.27

Clock Distribution Network with Backside Clock Mesh in BSPDN Architecture

cs.AR ·2026-11-16 ·Seohyun Kim, Youngjin Chae, Shilong Zhang, Youngsoo Shin
top venue similarity 0.58
Abstract · Accepted to ASP-DAC 2027

We propose a clock distribution network (CDN) in which the clock mesh is located on backside metal (BM) layers, while the rest of the network remains on the frontside. Since the backside power distribution network (BSPDN) also uses the BM layers, the clock mesh and power network must share them. We identify an important problem of placing mesh receivers while accounting for keep-out zones (KOZs) between clock- and power-nTSVs. We show that this problem can be solved using a potential-field method (PFM). Machine learning models are developed to place the mesh receivers: a U-Net predicts their initial positions, and an MLP predicts force weights for PFM-guided position refinement. Both models are trained through self-supervised learning by optimizing a differentiable objective that accounts for clock latency, IR-drop, and KOZ violations. Experimental results show that, on average, the proposed CDN reduces maximum local clock latency by 26%, global clock skew by 40%, and mesh switching power by 29% compared with a frontside CDN. On the same backside CDN, ML-guided PFM satisfies KOZ constraints while lowering IR-drop by 33% and requiring 85% fewer iterations than standard PFM.

0.41

High-Performance Low-Power Adiabatic Systolic Array Design in Advanced FinFET Nodes

cs.AR ·2026-08-30 ·Jun Yin, Liangtao Dai, Yimin Gao, Mircea R. Stan
published similarity 0.57
Abstract · Accepted to the 44th IEEE International Conference on Computer Design (ICCD 2026)

Adiabatic logic has traditionally been recognized as a low-power solution but constrained to low clock speeds to preserve adiabatic behavior. For advanced FinFET nodes, however, clock frequencies have plateaued due to power/thermal concerns (dark silicon) even as the intrinsic device speeds have continued to scale. This convergence opens an opportunity for adiabatic logic to maintain adiabatic behavior even at GHz clocks. We demonstrate an adiabatic logic (AL) design methodology through a MAC systolic array implemented in commercial 16 nm FinFET technology with a resonant 4-phase power clock (PCK) generator, including digital-to-AL and AL-to-digital interfaces. Simulations show that the AL MAC systolic array at 1 GHz achieves power reductions of up to 42% and 36% at the core and system levels, respectively, compared to digital counterparts. Scaling to more advanced nodes should provide even better power/performance metrics.

0.36

System-Technology Co-Evaluation of A7 CFET and A10 NSFET Technologies from Cell Parasitics to Chip Reliability

cs.ET ·2026-09-14 ·Mahdi Benkhelifa, Leon Mayr, Hadi Nour Eddine, Andrea Padovani, Luca Larcher +1 more
similarity 0.56
Abstract

Complementary FETs (CFETs) extend nanosheet FET (NSFET) scaling by vertically stacking n- and p-type gate-all-around (GAA) devices, thereby shrinking standard-cell area. The performance gain, however, cannot be assessed from device metrics alone, as CFET layouts also introduce larger cell-level parasitic resistance and capacitance (RC). In this work, we present a physics-based thermal- and aging-aware system-technology co-evaluation (STCO) flow to assess parasitic RCs in A7 CFET and A10 NSFET technology nodes. Our flow links calibrated device models, optimized standard-cell generation, automated GDS-to-TCAD conversion enabling accurate 3D parasitic RC extraction, full RTL-to-GDS implementation for an AI accelerator, multiphysics thermal analysis, and physics-based bias temperature instability (BTI) aging evaluation. Using the same device model for both technologies, we can isolate the impact of parasitic RCs and design at different levels of the design flow. The results of the AI accelerator design demonstrate that the A7 CFET reduces the chip area by 24.7% and the total wire length by 12%, improving the area efficiency TOPS/mm^2 by 74% relative to the baseline of the A10 NSFET. Under iso-frequency operation, results reveal that CFET voltage scaling reduces power by 68% and lowers power density from 148 W/cm^2 to 55 W/cm^2, which reduces the chip's temperature from 125 degrees C down to merely 62 degrees C. The resulting reduction in stress temperature suppresses 10-year BTI-induced degradation by 39%, reducing the required aging timing guardband by 53%.

0.34

Mesh-Native Physics-Informed Graph Surrogates for TCAD-in-the-Loop Design Space Exploration

cs.LG cs.ARcs.CE ·2026-09-02 ·Leonid Popryho, Ayoub Sadeghi, Inna Partin-Vaisband
published similarity 0.56
Abstract · 9 pages, 4 figures, 2 tables. Accepted at IEEE/ACM International Conference on Computer-Aided Design (ICCAD 2026)

High-fidelity TCAD simulation of drift-diffusion transport remains the workhorse of emerging FinFET device design, but it is computationally expensive, especially for 3D structures where runtime escalates steeply with mesh complexity. This sharply limits multi-objective design space exploration. Existing machine-learning surrogates map a fixed set of design parameters to a few scalar device metrics, discarding the underlying physics and losing transferability across device geometries and families. A physics-informed graph attention network (GAT) surrogate is proposed. It operates directly on the tetrahedral TCAD mesh and predicts, at every mesh node, the electrostatic potential together with the electron and hole quasi-Fermi levels, the fundamental unknowns of the drift-diffusion system. Training combines a data loss with finite-volume current-continuity residuals, embedding carrier-transport physics into the objective. Operating on the mesh as a graph, the surrogate inherits size generalization: a model trained on few-fin meshes applies unchanged to substantially larger arrays, bounded at inference only by GPU memory. Per-node uncertainty from a deep ensemble drives an active-learning loop that screens large candidate pools in seconds and forwards only the most informative designs for full simulation. Benchmarked against Sentaurus Device on multi-fin tri-gate FinFETs, the surrogate reproduces the three drift-diffusion fields with sub-volt per-field RMSE and reaches a per-design throughput orders of magnitude higher than the full simulator. The advantage grows with device size: on large multi-fin arrays that are prohibitively slow to simulate directly, inference still completes in under a second per device, enabling Pareto-front exploration across device scales infeasible for direct TCAD sweeps.

0.62