CS Paper Radar

Breaking the Myth of Four-Tier Stacked Transistors for Logic: an Investigation from Process to Device and Block-Level PPA

Jianxiang Jin, Haoran Lu, Yihan Luo, Yanbang Chu, Yibo Zhang, Jingru Jiang, Yuji Cheng, Wanyue Peng, Xun Jiang, Feiyu Teng, Kairang Guo, Ming Li, Yibo Lin, Runsheng Wang, Heng Wu, Ru Huang

cs.ET cond-mat.mes-hall ·submitted 2026-11-18 04:11 UTC · v1

Abstract

For the first time, this work evaluated whether 4-tier stacked transistors can translate the straightforward density gains into realistic chip-level scaling benefits. A practical dual-sided 4-tier transistor-stacking CFFET (Flipped CFET-to-CFET) process was proposed, on which a DTCO framework spanning standard-cell design, local interconnects, RO analysis, and physical implementation was built under 2A node design rules. The CFFET was also benchmarked with its 2-tier transistor-stacking counterparts FFET. Among CFFET configurations, the best-performing Symmetric Power still lags FFET by 11.2% in RO frequency due to the complex MOL parasitics. At the block level, CFFET reduces the Ibex RISC-V core area by only 12.8% (far below the 40% nominal cell-height reduction), while running 10.9% slower at iso-power. We further introduced a novel Tetris-like cell stitching to minimize the area overhead, which allows non-rectangular cell design and recovers 7.4% area in a 1-bit ALU design. An optimized NanoStack CFFET was finally proposed, inspired by previous work. This work indicates that straightforward vertical 4-tier stacking proves insufficient to guarantee enough PPA benefits, though the resulting design insights may guide future advanced architectures.

Comment
4 pages,17 figures,conference

Closest papers

Nearest neighbours by meaning across the whole index.

Design Space Exploration of Backside Clock Meshes for 2 nm GAAFET BSPDN Technology

cs.AR ·2026-10-01 ·Wajid Ali, Muhammad Hadir Khan, Dalton Gaddy, Matthew Guthaus
similarity 0.60
Abstract

Clock meshes are used in high-performance VLSI designs to minimize skew and tolerate on-chip variation, but they spend scarce routing resources on premium metal layers. Backside power delivery creates a new option: it adds thick, low-resistance metal layers on the back of the wafer, and the power grid does not consume all of them. Flip-flops remain on the frontside; a backside mesh therefore cannot drive them directly, and every connection passes through a through-silicon via. We present the first design-space exploration of backside clock meshes, implemented in OpenROAD on GT2N, a 2 nm nanosheet technology. Four benchmarks (1,938 to 15,311 flip-flops) are explored with multi-objective Bayesian optimization, and every design point is verified by transistor-level SPICE simulation, since the cyclic mesh cannot be evaluated by static timing analysis. Across all four designs, the backside mesh consistently outperforms an identical frontside mesh, with on average 45% lower skew, 25% lower sink slew, 4.5% lower power, and 28% less frontside clock wiring, and its skew spread under 10,000-sample Monte Carlo is a third of the frontside mesh's.

0.28

System-Technology Co-Evaluation of A7 CFET and A10 NSFET Technologies from Cell Parasitics to Chip Reliability

cs.ET ·2026-09-14 ·Mahdi Benkhelifa, Leon Mayr, Hadi Nour Eddine, Andrea Padovani, Luca Larcher +1 more
similarity 0.60
Abstract

Complementary FETs (CFETs) extend nanosheet FET (NSFET) scaling by vertically stacking n- and p-type gate-all-around (GAA) devices, thereby shrinking standard-cell area. The performance gain, however, cannot be assessed from device metrics alone, as CFET layouts also introduce larger cell-level parasitic resistance and capacitance (RC). In this work, we present a physics-based thermal- and aging-aware system-technology co-evaluation (STCO) flow to assess parasitic RCs in A7 CFET and A10 NSFET technology nodes. Our flow links calibrated device models, optimized standard-cell generation, automated GDS-to-TCAD conversion enabling accurate 3D parasitic RC extraction, full RTL-to-GDS implementation for an AI accelerator, multiphysics thermal analysis, and physics-based bias temperature instability (BTI) aging evaluation. Using the same device model for both technologies, we can isolate the impact of parasitic RCs and design at different levels of the design flow. The results of the AI accelerator design demonstrate that the A7 CFET reduces the chip area by 24.7% and the total wire length by 12%, improving the area efficiency TOPS/mm^2 by 74% relative to the baseline of the A10 NSFET. Under iso-frequency operation, results reveal that CFET voltage scaling reduces power by 68% and lowers power density from 148 W/cm^2 to 55 W/cm^2, which reduces the chip's temperature from 125 degrees C down to merely 62 degrees C. The resulting reduction in stress temperature suppresses 10-year BTI-induced degradation by 39%, reducing the required aging timing guardband by 53%.

0.34

qLevelPlace: A Level-Based Placement Framework for RSFQ Circuits

cs.ET ·2026-11-02 ·Ziyu Liu, Jingkai Hong, Robert S. Aviles, Sasan Razmkhah, Peter A. Beerel +1 more
top venuebenchmark similarity 0.56
Abstract · 7 pages, 4 figures. Accepted to ASP-DAC 2027

Rapid Single Flux Quantum (RSFQ) logic can operate at ultra-high clock frequencies; however, its physical design is complicated by explicit splitter trees and deep gate-level pipelines in which every logic gate is clocked. To address this challenge, we present qLevelPlace, a level-based placement framework for RSFQ circuits. We separate gate and splitter placement into two stages to better support levelguided gate-to-row assignment and use a timing-aware quadratic cost function to penalize long interconnects. Experiments on the benchmark circuits show that, on average, qLevelPlace achieves a $2.65\times$ higher clock frequency and a 51% reduction in layout area compared with the state-of-the-art RSFQ placer qPlace.

0.32

CU-3D: A Scalable Legality-Aware RTL-to-GDS Flow for 3D-IC Physical Design

cs.AR ·2026-11-08 ·Mingjun Wang, Guanqi Li, Yihan Wen, Lancheng Zou, Mingjun Li +8 more
similarity 0.55
Abstract

Face-to-face (F2F) hybrid bonds shorten interdie connections, but data, clock, and power-grid (PG) connections must be realized together. CU-3D is a RTL-to-GDS physical design flow based on commercial EDA tools. It derives role-compatible hybrid-bond (HB) sites from a 17-metal ASAP7-based technology model, complete HB footprints, and constructed PG geometry. To coordinate partitioning with placement flexibility, Scaled refines an inherited 2D placement, whereas Fresh places the receiving die first and uses its pin locations and clock loads to guide placement of the other die. Data and clock HB assignments are jointly optimized while retaining alternative data sites and reserving capacity for subsequent PG assignment. The selected HB sites and stacks are preserved during 3D clock-tree synthesis, supply-aware cell insertion, and routing. Across eleven designs, including a 133-macro processor, the flow achieves zero backend DRC violations and passes signal-connectivity checks. Nine paired designs admit lower-footprint, lower-power implementations; four improve setup WNS. On JPEG, early joint planning gains 87 ps and mobility-aware partitioning gains 346 ps. Path analysis explains why cell-delay savings can outweigh net-delay increases.

0.21

Exstill: The Most Efficient Single-Chip Processor for the Next Token

cs.AR cs.LG ·2026-11-13 ·Valavan Manohararajah, Vithursan Thangarasa
similarity 0.55
Abstract · 62 pages plus references (72 total), 16 figures, 22 tables. Technical report

Generating a token with a language model requires a fixed amount of arithmetic, whose energy sets a floor beneath any hardware. For Qwen3-1.7B at a 16K-token context, gate-level measurements at 5 nm place this floor at 0.89 mJ per token, yet an NVIDIA B300 spends 391-1,120x that. The excess is the price of generality, software layers, programmable hardware and moving weights and key-value (KV) caches from external memory, and it widens with each process generation. We present a co-design approach that brings token generation close to this floor and then lowers the floor itself, optimizing silicon and model together in a gate-level search loop. Fixing one model architecture in the datapath, with weights still loadable, and holding weights and every conversation's KV cache on-die, a pre-silicon 5 nm design brings an unchanged Qwen3-1.7B token to 3.4x its floor. Co-designing the model with the circuits at fixed quality lowers the floor to 0.29 mJ and the token to 0.52 mJ, 1.8x the new floor and less than the baseline model's arithmetic alone, while on-die capacity grows from one user to twelve. Against a measured B300 serving the same twelve users, the design decodes each user's tokens 110x faster at 690x lower energy. To show that one fixed architecture can serve, as a co-processor, the latency-critical workloads around a frontier model, we introduce Polyglot-DC (1.7B and 4B, each with its own design), specialized for each job by distillation and task-specific training into its own weights. As a drafter it speeds single-user speculative decoding of large open models by up to 6.6x at the maximum reasoning effort. Its guard returns multilingual verdicts in a millisecond or less, within a point of the strongest open guard. Its agent and financial-reasoning models lead comparable open models on established benchmarks, with a reasoning turn falling from seconds to tens of milliseconds.

0.25

GPU-Accelerated Gate-Level Time-Based Power Analysis via Event-Density-Aware Partitioning and Kernel Fusion

cs.AR ·2026-09-05 ·Weihao Wang, Yikang Ouyang, Hongyuan Liu, Yuzhe Ma
top venue similarity 0.54
Abstract · Accepted for publication in ACM Transactions on Architecture and Code Optimization (TACO)

Power analysis is crucial in modern chip design flow. Particularly, time-based power analysis can provide fine-grained power consumption information to facilitate the diagnosis of power issues and guide power optimization accordingly. However, it may take tens of hours to conduct time-based power analysis on modern large-scale circuits, which greatly slows down the power optimization flow. In this paper, we present the first GPU-accelerated gate-level time-based power analysis framework. We propose a novel data structure to enable efficient state-dependent power retrieval. To accommodate the imbalanced event distribution across gates, we propose an event-density-aware partitioning strategy that allocates GPU threads based on gate event density. Finally, we fuse the power computation into a single kernel invocation to reduce redundant work in separate kernels. Experimental results show that our proposed framework achieves high accuracy while delivering up to 37.63x end-to-end speedup compared to multi-threaded Synopsys PrimeTime PX.

0.36

Evaluation of Power-Clock Waveforms for Positive Feedback Adiabatic Logic in 16 nm FinFET Technology

cs.AR ·2026-09-17 ·Maciej Szymon Pyrzowski, Franciszek Łukowski, Aida Todri-Sanial
similarity 0.54
Abstract · 18 pages, 13 figures, 3 tables

Adiabatic logic can recover part of the energy stored on load capacitances through quasi-reversible switching, but its waveform-optimized operation in FinFET technology and at multi-GHz frequencies remains underexplored. This work investigates Positive Feedback Adiabatic Logic (PFAL) in the TSMC 16 nm FinFET process. A functionally complete PFAL gate library is designed, verified, and characterised using energy-delay product optimization over power-clock amplitude, frequency, and waveform shape. The power-clock sweep shows that the minimum-energy waveform approaches a triangular shape rather than a conventional trapezoid. The optimized single-gate PFAL cells achieve up to 3.83x lower energy than equivalent static CMOS gates, while sinusoidal excitation improves energy by up to 1.32x compared with trapezoidal excitation and extends the valid operating range. The library is then used to construct larger combinational circuits, including a 2:1 multiplexer, a 4-bit ripple carry adder, and a 4-bit Brent-Kung carry look-ahead adder. The carry look-ahead adder reaches a gain of up to 5.3x compared with the static CMOS energy estimate for the triangular power-clock.

0.21

High-Performance Low-Power Adiabatic Systolic Array Design in Advanced FinFET Nodes

cs.AR ·2026-08-30 ·Jun Yin, Liangtao Dai, Yimin Gao, Mircea R. Stan
published similarity 0.53
Abstract · Accepted to the 44th IEEE International Conference on Computer Design (ICCD 2026)

Adiabatic logic has traditionally been recognized as a low-power solution but constrained to low clock speeds to preserve adiabatic behavior. For advanced FinFET nodes, however, clock frequencies have plateaued due to power/thermal concerns (dark silicon) even as the intrinsic device speeds have continued to scale. This convergence opens an opportunity for adiabatic logic to maintain adiabatic behavior even at GHz clocks. We demonstrate an adiabatic logic (AL) design methodology through a MAC systolic array implemented in commercial 16 nm FinFET technology with a resonant 4-phase power clock (PCK) generator, including digital-to-AL and AL-to-digital interfaces. Simulations show that the AL MAC systolic array at 1 GHz achieves power reductions of up to 42% and 36% at the core and system levels, respectively, compared to digital counterparts. Scaling to more advanced nodes should provide even better power/performance metrics.

0.36