CS Paper Radar

Evaluation of Power-Clock Waveforms for Positive Feedback Adiabatic Logic in 16 nm FinFET Technology

Maciej Szymon Pyrzowski, Franciszek Łukowski, Aida Todri-Sanial

cs.AR ·submitted 2026-09-17 10:06 UTC · v1

Abstract

Adiabatic logic can recover part of the energy stored on load capacitances through quasi-reversible switching, but its waveform-optimized operation in FinFET technology and at multi-GHz frequencies remains underexplored. This work investigates Positive Feedback Adiabatic Logic (PFAL) in the TSMC 16 nm FinFET process. A functionally complete PFAL gate library is designed, verified, and characterised using energy-delay product optimization over power-clock amplitude, frequency, and waveform shape. The power-clock sweep shows that the minimum-energy waveform approaches a triangular shape rather than a conventional trapezoid. The optimized single-gate PFAL cells achieve up to 3.83x lower energy than equivalent static CMOS gates, while sinusoidal excitation improves energy by up to 1.32x compared with trapezoidal excitation and extends the valid operating range. The library is then used to construct larger combinational circuits, including a 2:1 multiplexer, a 4-bit ripple carry adder, and a 4-bit Brent-Kung carry look-ahead adder. The carry look-ahead adder reaches a gain of up to 5.3x compared with the static CMOS energy estimate for the triangular power-clock.

Comment
18 pages, 13 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Evaluating Positive Feedback Adiabatic Logic in 16nm FinFET with a Realistic Power-Clock

cs.AR ·2026-09-17 ·Franciszek Łukowski, Maciej Pyrzowski, Aida Todri-Sanial
similarity 0.85
Abstract · 11 pages, 21 figures, 8 tables

Adiabatic logic reuses the energy stored on load capacitances through quasi-reversible switching, enabling a lower minimum energy consumption than conventional static CMOS. Yet its practicality in FinFET technologies and at multi-GHz clock rates has yet to be investigated. This work provides a systematic evaluation of Positive Feedback Adiabatic Logic (PFAL) simulated in the TSMC 16nm FinFET process. A set of PFAL standard-cell gates were realised, along with two representative combinational circuits - a 2$\times$2 multiplier and a 4-bit comparator - and compared against static CMOS logic using the energy--delay product (EDP) and the energy advantage metric $η= E_{\mathrm{CMOS}} / E_{\mathrm{PFAL}}$. Transient simulations reveal three sources of non-adiabatic loss: two specific to the PMOS/NMOS latch, threshold-voltage-related loss and a previously unreported redundant charging of the output node and one related to the complexity of PFAL logic trees. The low-threshold Buffer/NOT cell achieves a minimum EDP of $1.23\times10^{-26}$J$\cdot$s at $V_{\mathrm{CLK}} = 0.6$V and $f_{\mathrm{CLK}} = 7.94$GHz, while PFAL preserves an energy benefit over static CMOS of up to roughly $5\times$ at reduced frequencies and elevated supply voltages. A parallel-coupled quadrature voltage-controlled oscillator is designed as a realistic four-phase power-clock generator. With this non-ideal supply, the Buffer/NOT energy stays within $2\%$ of the ideal sinusoidal case at $3$GHz. A loading study quantifies the phase shift and amplitude reduction induced by increasing fan-out. Overall, the results provide a design-oriented evaluation of PFAL in 16nm FinFET and a motivation to exploit adiabatic logic for future low-power system architectures.

0.22

High-Performance Low-Power Adiabatic Systolic Array Design in Advanced FinFET Nodes

cs.AR ·2026-08-30 ·Jun Yin, Liangtao Dai, Yimin Gao, Mircea R. Stan
published similarity 0.72
Abstract · Accepted to the 44th IEEE International Conference on Computer Design (ICCD 2026)

Adiabatic logic has traditionally been recognized as a low-power solution but constrained to low clock speeds to preserve adiabatic behavior. For advanced FinFET nodes, however, clock frequencies have plateaued due to power/thermal concerns (dark silicon) even as the intrinsic device speeds have continued to scale. This convergence opens an opportunity for adiabatic logic to maintain adiabatic behavior even at GHz clocks. We demonstrate an adiabatic logic (AL) design methodology through a MAC systolic array implemented in commercial 16 nm FinFET technology with a resonant 4-phase power clock (PCK) generator, including digital-to-AL and AL-to-digital interfaces. Simulations show that the AL MAC systolic array at 1 GHz achieves power reductions of up to 42% and 36% at the core and system levels, respectively, compared to digital counterparts. Scaling to more advanced nodes should provide even better power/performance metrics.

0.36

Breaking the Myth of Four-Tier Stacked Transistors for Logic: an Investigation from Process to Device and Block-Level PPA

cs.ET cond-mat.mes-hall ·2026-11-18 ·Jianxiang Jin, Haoran Lu, Yihan Luo, Yanbang Chu, Yibo Zhang +11 more
similarity 0.54
Abstract · 4 pages,17 figures,conference

For the first time, this work evaluated whether 4-tier stacked transistors can translate the straightforward density gains into realistic chip-level scaling benefits. A practical dual-sided 4-tier transistor-stacking CFFET (Flipped CFET-to-CFET) process was proposed, on which a DTCO framework spanning standard-cell design, local interconnects, RO analysis, and physical implementation was built under 2A node design rules. The CFFET was also benchmarked with its 2-tier transistor-stacking counterparts FFET. Among CFFET configurations, the best-performing Symmetric Power still lags FFET by 11.2% in RO frequency due to the complex MOL parasitics. At the block level, CFFET reduces the Ibex RISC-V core area by only 12.8% (far below the 40% nominal cell-height reduction), while running 10.9% slower at iso-power. We further introduced a novel Tetris-like cell stitching to minimize the area overhead, which allows non-rectangular cell design and recovers 7.4% area in a 1-bit ALU design. An optimized NanoStack CFFET was finally proposed, inspired by previous work. This work indicates that straightforward vertical 4-tier stacking proves insufficient to guarantee enough PPA benefits, though the resulting design insights may guide future advanced architectures.

0.23

RENESIS: Energy-Aware Synthesis of Adiabatic Logic from Irreversible Netlists

cs.AR cs.ET ·2026-08-17 ·Mitchell A. Thornton
benchmarkcode/data similarity 0.52
Abstract · v1: 33pp., 13 figs; v2: 34 pp., 13 figs, 11 tables, added optimality gap results and cost remark for affine-detection test

We describe Renesis, an automated synthesis tool that accepts an ordinary irreversible netlist and produces a verified, technology-mapped energy-recovery (adiabatic) circuit, using energy rather than area or delay as the optimization criterion. Renesis models the netlist with a vector-space formulation that expresses simulation and justification sweeps as forward and reverse traversals whose cost is linear in the number of circuit components. The traversals populate ledgers with data tags that characterize switching, erasure, and observability information at their natural Rényi orders. The output is a logically reversible circuit mapped to one of eight energy-recovery families, with the associated parameters reported. Reversibility is treated here as a circuit-level requirement rather than a thermodynamic one. When an adiabatic gate erases information the penalty is not $k_B T \ln 2$ but a full non-adiabatic $CV^2$ discharge, which is comparable to the switching energy the circuit style exists to recover. Every synthesis transformation is equivalence-checked, and it must improve one of two reported cost tables, one uncapped and one after a series-realizability bound, while worsening neither before it is accepted. Across a twenty-circuit development set, optional re-synthesis passes improve fourteen circuits. On a held-out set of twenty circuits, fifteen of nineteen are improved, with a best-arm median of $0.91$ of the default energy. A certified optimality-gap program computes the distance between the synthesized circuits and the provable floor of the tool's own search space. A device-level SPICE deck reproduces the tool's per-cycle energy figures on the reference family. The tool, the benchmark netlists, the validation procedure, and the run records behind every reported number are released as open source.

0.37

Design Space Exploration of Backside Clock Meshes for 2 nm GAAFET BSPDN Technology

cs.AR ·2026-10-01 ·Wajid Ali, Muhammad Hadir Khan, Dalton Gaddy, Matthew Guthaus
similarity 0.52
Abstract

Clock meshes are used in high-performance VLSI designs to minimize skew and tolerate on-chip variation, but they spend scarce routing resources on premium metal layers. Backside power delivery creates a new option: it adds thick, low-resistance metal layers on the back of the wafer, and the power grid does not consume all of them. Flip-flops remain on the frontside; a backside mesh therefore cannot drive them directly, and every connection passes through a through-silicon via. We present the first design-space exploration of backside clock meshes, implemented in OpenROAD on GT2N, a 2 nm nanosheet technology. Four benchmarks (1,938 to 15,311 flip-flops) are explored with multi-objective Bayesian optimization, and every design point is verified by transistor-level SPICE simulation, since the cyclic mesh cannot be evaluated by static timing analysis. Across all four designs, the backside mesh consistently outperforms an identical frontside mesh, with on average 45% lower skew, 25% lower sink slew, 4.5% lower power, and 28% less frontside clock wiring, and its skew spread under 10,000-sample Monte Carlo is a third of the frontside mesh's.

0.28

S-ALSA: Co-Design of Adiabatic Logic-based Sensing and Balanced Bit-Cells for Secure and Energy-Efficient MRAM

cs.AR ·2026-09-27 ·Wu Yang, Amit Degada, Himanshu Thapliyal
similarity 0.47
Abstract · 6 pages; 2026 IEEE Computer Society Annual Symposium on VLSI, July 2026

Magnetoresistive Random Access Memory (MRAM) technologies such as Spin-Transfer Torque (STT-MRAM) and Spin-Orbit Torque assisted (SOT-STT-MRAM) offer nonvolatility and low leakage, making them attractive for IoT systems. However, conventional MRAM read circuits face two fundamental challenges: high dynamic energy consumption and vulnerability to side-channel attacks caused by data-dependent current variations in Magnetic Tunnel Junctions (MTJs). This paper presents a Secured Adiabatic Logic Sense Amplifier (SALSA) that addresses both challenges simultaneously through circuit-device co-design. S-ALSA combines structural current balancing via a 4T-2MTJ bit cell, which eliminates read current asymmetry at the storage level, with dynamic power equalization via adiabatic charge recovery in the sensing circuit. The proposed architecture supports both STT-MRAM and SOT-STT-MRAM. Case studies using 4x4 MRAM macros shows up to 80% energy savings over conventional Pre-Charge Sense Amplifiers (PCSA) across IoT frequencies. Correlation Power Analysis (CPA) attacks on PRESENT-80 encryption confirm complete suppression of key leakage when S-ALSA is combined with a balanced bit cell. This work establishes a unified framework where energy efficiency and hardware security are achieved simultaneously, enabling secure and low-power IoT memory design.

0.26

Design Space Exploration of In-Memory Computing Implementations for Discrete Fourier Transform

eess.SP ·2026-09-18 ·Sofia Tatidis, Philip Nielsen, Liang Liu, Mojtaba Mahdavi
similarity 0.47
Abstract

Although memristor-based in-memory computing (IMC) has been widely investigated for brain-inspired neuromorphic workloads, systematic evaluations of its energy, latency, and signal-to-noise ratio (SNR) trade-offs across diverse system parameters remain scarce for classical digital signal processing (DSP). To address this gap, this paper introduces a comprehensive hardware-aware design framework for systematically mapping algorithmic workloads onto IMC architectures, using the discrete Fourier transform (DFT) as a case study. Tailored to the stringent performance requirements of a DFT accelerator for 5G orthogonal frequency-division multiplexing (OFDM) systems, we propose a novel mapping scheme that reduces energy consumption per computation by 53% compared with conventional mapping techniques. Additionally, we present a comparative study of resistive random-access memory (RRAM) and ferroelectric tunnel junction (FTJ) technologies with identical numbers of programmable states but distinct conductance ranges, demonstrating the importance of device-informed architectural co-design. By bridging the gap between emerging IMC architectures and rigid DSP constraints, this work provides a pathway toward energy-efficient edge accelerators for future wireless communication systems.

0.12

Clock-Gating Insertion Strategies on an Open-Source MSP430 Core: A Reproducible PPA Study and a Gate-Level Simulation Caveat

cs.AR ·2026-08-31 ·Xingran Huang, Qiming Guo, Jinwen Tang, Wenqi Jia, Dongzheng Wang
publishedcode/data similarity 0.47
Abstract · 8 pages, 9 figures, 5 tables. Accepted for presentation at IEEE UEMCON 2026. Code and reproducibility artifact: https://github.com/yanyana11…

Clock gating, the standard technique for cutting dynamic power, is introduced either as hand-written behavioral clock gates at the register-transfer level (RTL) or as integrated clock-gating (ICG) cells inserted automatically during synthesis; the two are widely treated as interchangeable. In this paper we show, on a real open-source 16-bit microcontroller core (openMSP430) synthesized with a 32 nm standard-cell library, that they are not equivalent in practice: behavioral latch-based RTL gating is functionally correct in ideal RTL simulation (10/10 self-checking testcases, identical to the ungated baseline) yet fails at gate level: the gated multiplier result is never captured and reads zero, while tool-inserted ICG cells pass gate-level simulation cleanly (10/10). We root-cause the failure to a hold race introduced by the late latch+AND gated clock, and show it persists across eight simulation configurations including full Standard Delay Format (SDF) back-annotation, not a simulator-setting artifact. We then quantify the power/area/timing (PPA) impact of three gating strengths: RTL behavioral (Opt1), synthesis ICG (Opt2), and both (Opt3), against the ungated baseline, across four workloads and three process corners (ss/tt/ff). The benefit is corner-robust: ICG (Opt2) cuts dynamic power by 74-81% and total power by 25-30% at every corner. We also show that in this leakage-dominated 32 nm regime the total-power win comes from the area/leakage reduction that gating brings (leakage -24 to -30%), not from the large dynamic saving, which instead dominates active-mode energy. Our recommendation for low-power design on open-source cores is to prefer tool-inserted ICG cells over hand-written behavioral clock gates. The full flow (Design Compiler synthesis, PrimeTime PX power, and self-checking verification) is released as an open artifact.

0.75