CS Paper Radar

Clock-Gating Insertion Strategies on an Open-Source MSP430 Core: A Reproducible PPA Study and a Gate-Level Simulation Caveat

Xingran Huang, Qiming Guo, Jinwen Tang, Wenqi Jia, Dongzheng Wang

cs.AR ·submitted 2026-08-31 15:23 UTC · v1
publishedcode/data

Abstract

Clock gating, the standard technique for cutting dynamic power, is introduced either as hand-written behavioral clock gates at the register-transfer level (RTL) or as integrated clock-gating (ICG) cells inserted automatically during synthesis; the two are widely treated as interchangeable. In this paper we show, on a real open-source 16-bit microcontroller core (openMSP430) synthesized with a 32 nm standard-cell library, that they are not equivalent in practice: behavioral latch-based RTL gating is functionally correct in ideal RTL simulation (10/10 self-checking testcases, identical to the ungated baseline) yet fails at gate level: the gated multiplier result is never captured and reads zero, while tool-inserted ICG cells pass gate-level simulation cleanly (10/10). We root-cause the failure to a hold race introduced by the late latch+AND gated clock, and show it persists across eight simulation configurations including full Standard Delay Format (SDF) back-annotation, not a simulator-setting artifact. We then quantify the power/area/timing (PPA) impact of three gating strengths: RTL behavioral (Opt1), synthesis ICG (Opt2), and both (Opt3), against the ungated baseline, across four workloads and three process corners (ss/tt/ff). The benefit is corner-robust: ICG (Opt2) cuts dynamic power by 74-81% and total power by 25-30% at every corner. We also show that in this leakage-dominated 32 nm regime the total-power win comes from the area/leakage reduction that gating brings (leakage -24 to -30%), not from the large dynamic saving, which instead dominates active-mode energy. Our recommendation for low-power design on open-source cores is to prefer tool-inserted ICG cells over hand-written behavioral clock gates. The full flow (Design Compiler synthesis, PrimeTime PX power, and self-checking verification) is released as an open artifact.

Comment
8 pages, 9 figures, 5 tables. Accepted for presentation at IEEE UEMCON 2026. Code and reproducibility artifact: https://github.com/yanyana117/openmsp430-low-power-study-full

Closest papers

Nearest neighbours by meaning across the whole index.

A Probabilistic Behavioral RTL Simulation Framework for Probabilistic Compute Fabrics

cs.ET ·2026-11-18 ·Zehuan Wang, Chaohui Li, Ruihong Yin, Xunqi Li, Chris H. Kim
similarity 0.63
Abstract · 5 pages, 5 figures

Coupled oscillator Ising hardware can produce different solution qualities across repeated runs of the same problem, while a deterministic behavioral model used for the design yields a single outcome under fixed conditions. Capturing this stochastic variability during design time is essential for evaluating how closely simulation reflects silicon behavior. This work presents a probabilistic behavioral RTL simulation framework that introduces Gaussian timing variation into coupling delays. This variation changes oscillator timing during evolution, producing different outcomes across runs while retaining the existing chip control and readout blocks. The framework is evaluated against measurements from two chips: a 28-nm CMOS chip with 66 spins and a 16-nm FinFET chip with 49 spins, using 250 problems run 100 times repetitively. Compared with deterministic simulation, the model reduces the average absolute gap between sorted simulation and silicon outcomes by 14.0% and 28.4% on the two chips, respectively. These results demonstrate that a simple behavioral timing variation model can be a useful tool for designing and verifying probabilistic computing chips.

0.22

Automated Pre-Silicon Verification of High-Speed DDR5 and LPDDR5/6 Memory Controllers: Closed-Loop Timing, Mode Register, and PHY Synchronization in UVM

cs.AR ·2026-09-28 ·Manan Patel, Anirban Majumder
similarity 0.61
Abstract · 4 pages, 2 figures, 1 table, IEEE two-column format

External memory interfaces (such as LPDDR5/4 and DDR5) are essential components of modern mobile, cloud, and enterprise computing systems. While memory manufacturers focus on physical DRAM die development, the vast majority of semiconductor firms design custom application ASICs that require a dedicated Memory Controller to interface with these standardized external memories. Consequently, pre-silicon design verification of the Memory Controller RTL -- acting as the Device Under Test (DUT) against a third-party DRAM Verification IP (VIP) -- is a ubiquitous and critical challenge across the global semiconductor industry. This article presents an automated, pre-silicon configuration and closed-loop initialization framework for Memory Controller verification. The proposed solution parses JEDEC timing and configuration parameters directly from the DRAM VIP's database files (such as Denali SOMA files) to configure the Memory Controller DUT's registers, while a custom Mode Register Register Abstraction Layer (MR-RAL) tracks volatile DRAM VIP states in real-time. Furthermore, a dynamic, re-compilation-free PHY initialization flow randomizes interface parameters directly in the testbench, executes on-the-fly configuration generation via system calls, and parses the resulting register write sequences at runtime. By integrating these automated methodologies into pre-silicon verification flows, engineers can eliminate setup overhead, prevent false protocol violations, and enable comprehensive randomized testing of complex PHY and Memory Controller configurations.

0.24

TPCS: A Cycle-Level Simulation Paradigm with Native Execution Semantics for RTL Modeling and Generation

cs.AR ·2026-10-09 ·Chengzhen Meng, Xiaoyu Li, Chen Bai, Zhenyu Zhang, Hongjun Dai
similarity 0.61
Abstract · Submitted to IEEE TC

The growing diversity of domain-specific architectures and microarchitectural designs demands fast and accurate evaluation methods during early design stages. However, existing approaches suffer from a fundamental trade-off: high-level simulators offer speed but lack fidelity, while RTL-based tools provide accuracy at the cost of significant simulation overhead. This gap limits efficient pre-RTL microarchitecture exploration. Therefore, we propose Transaction-Pruned Cycle Simulation (TPCS), a novel modeling and simulation framework. It serves as a unified intermediate abstraction spanning microarchitecture modeling, cycle-accurate simulation, and synthesizable RTL implementation. TPCS organizes combinational logic as transaction-based function invocations and leverages host CPU control flow to naturally prune inactive logic, eliminating the need for explicit event scheduling or signal tracking. This enables cycle-accurate simulation with significantly improved performance. TPCS preserves structural correspondence with RTL and supports automatic generation of synthesizable designs. TPCS achieves 36$\times$-42$\times$ speedups over parallel Verilator on SMP systems and 3.4$\times$-7.2$\times$ over single-threaded Verilator on accelerators, with cycle-level waveform agreement on the evaluated traces. The generated RTL demonstrates comparable timing and area to handcrafted implementations, with relative changes of -4.7\% to +2.6\% in clock period and -3.3\% to +4.0\% in standard-cell area. By bridging the abstraction gap between high-level modeling and RTL design, TPCS enables a unified and agile pre-RTL workflow, allowing efficient microarchitecture exploration with both high performance and implementation fidelity.

0.30

Reversing the Clock: Layout-Aware Recovery of Design Intent from Clock Distribution Networks

cs.CR ·2026-10-02 ·Sascha Tommasone, Zehra Karadağ, Christopher Pawlowicz, Michael Green, Bruno Machado Trindade +4 more
publishedcode/data similarity 0.58
Abstract · Accepted at the IEEE International Conference on Physical Assurance and Inspection of Electronics (PAINE) 2026

Hardware reverse engineering supports competitive analysis and hardware assurance by recovering information about an integrated circuit (IC) from its physical implementation. While existing techniques primarily recover the gate-level netlist, which represents logical functionality, they often overlook physical design decisions such as placement, routing, delay insertion, and interconnect optimization. The clock distribution network encapsulates many of these decisions; however, no prior published work has recovered this network from a fabricated IC to infer design intent. We present a layout-aware methodology that recovers and analyzes the clock distribution network by integrating a recovered gate-level netlist with layout information extracted from scanning electron microscope imagery. Our four-phase pipeline recovers clock-tree topology, buffering, gating and switching, interconnect delay, and crosstalk-mitigation measures. We demonstrate our methodology on a commercial 450 nm IC, recovering a global H-tree backbone with local X-tree-like branching, identifying an independent clock tree and global clock gating, quantifying latency, skew, and routing lengths, and confirming the absence of dedicated crosstalk mitigation. Together, these findings let us reason about the designer's intent. To encourage further research and support reproducibility, we release our clock tree recovery algorithm as open source.

0.45

Dynamic Slack-Aware Clocking for Near-Threshold Tensor Processing Units (TPUs)

cs.AR ·2026-09-22 ·Muhammad Usman Nadeem, Sanghamitra Roy, Koushik Chakraborty
top venue similarity 0.58
Abstract · 31 pages, 13 figures. Accepted manuscript of ACM Transactions on Design Automation of Electronic Systems (TODAES); DOI: 10.1145/3837085

Operating Tensor Processing Units (TPUs) in the near-threshold computing (NTC) region significantly reduces energy consumption but introduces high delay sensitivity to process variation and data activity. Conventional designs typically rely on a conservative, fixed global clock to ensure safety, which leaves large portions of timing margin unexploited as most operations finish well before the clock edge. We propose Dynamic Slack-Aware Clocking (DSAC), a proactive framework that replaces worst-case timing with operation-specific adjustments. DSAC employs lightweight Hamming-Distance, Most-Significant-Bit, and Hybrid predictors to estimate the delay sensitivity of individual multiply-accumulate (MAC) operations and classify them into three timing tiers. These tiers are enforced locally via dummy-hold cycles under a fixed global reference clock, enabling fine-grained timing adaptation without global clock retuning or frequency scaling. A closed-loop feedback controller monitors timing violations and updates tier thresholds at runtime to maintain resilience. Experiments on quantized DNN benchmarks demonstrate that the MSB predictor maintains high inference accuracy, with an average loss of only 1% even at aggressive performance points. Furthermore, DSAC achieves up to 1.55X better energy efficiency at 2.15X frequency scaling compared to a baseline TPU, while incurring an area overhead as low as 13%.

0.40

SIMT-Aware Lockstep Verification and Functional-Coverage Closure Methodology for an Open-Source RISC-V GPGPU: A UVM 1.2 Environment

cs.AR cs.PL ·2026-09-10 ·Samuel Moussa, Steven Ibrahim, Ahmad Sudky, Ahmad Fawzy, Abanoub Nabil +3 more
code/data similarity 0.57
Abstract

Open-source RISC-V GPGPUs such as Vortex ship with directed-kernel regressions but no reference-model checking, functional-coverage model, or sign-off discipline. This paper presents a UVM 1.2 environment and methodology that closes that gap. The environment wraps a bus-master SIMT DUT with role-inverted agents, integrates Vortex's functional simulator (SimX) as a per-configuration golden model over DPI-C, and renders verdicts via two injection-qualified checkers: a bidirectional end-state scoreboard and a per-instruction, per-lane lockstep comparator under five SIMT alignment rules. A two-pass load-value feed makes racy fenceless multi-core programs instruction-granularity verifiable (residual zero over 5,432 retirements), with the interrupt-timing boundary stated. A three-layer coverage model adds, to our knowledge, the first published SIMT functional-coverage layer for RTL GPU verification (divergence depth, bank conflicts, coalescing classes), closing its own layers at 98.1% covergroup-bin / 94.7% total (ISA layer separately: 83.1% bins / 89.3% weighted) under machine-generated, RTL-cited exclusions and a blocking waiver-integrity gate; an unstimulated D-extension elaboration affects no functional bin, only lowering totals. The checking depth surfaced real defects on both sides of the comparison: a JALR LSB ISA deviation, a non-scaling watchdog constant (since fixed upstream), a reset-relay X window found by restoring a silenced assertion, a missing AXI error path proven by fault injection, and a reference-model fetch bug found by the lockstep itself. FuzzGPU (USENIX Security 2026), a concurrent RTL GPU fuzzer on the same DUT, is complementary: fuzzing finds bugs, this methodology quantifies sign-off; both independently found the JALR deviation. All findings ship in an evidence-cited register; every number carries provenance and the method's boundaries are stated rather than waived.

0.23

TAPCO-G: LLM-Guided Design-Adaptive Timing and Power Co-Optimization with Graph-Based Physical Priors

cs.AR cs.AI ·2026-11-10 ·Wuqian Tang, Zixiao Wang, Che-Chien Lin, Fong-Hua Fu, Laura Angélica Shion-Korsak +3 more
similarity 0.57
Abstract · 27 pages

Post-placement timing and power co-optimization is critical to meeting setup timing targets and reducing power within placement constraints. A cell replacement can improve timing along one path while increasing power or reducing slack on others. Conventional optimizers follow fixed rules for scheduling and accepting repairs, limiting their ability to address design-specific bottlenecks. A large language model (LLM) can propose changes to these rules, but on its own it cannot reliably estimate how a cell replacement affects endpoint slack and power. TAPCO-G combines LLM-guided optimizer adaptation with graph-based physical priors to evaluate candidate cell replacements. The outer loop tunes tool settings using physical-design feedback and revises executable repair policies when tuning stalls. The inner loop anchors delay estimates to static timing analysis snapshots, accounts for upstream driver-load changes, and propagates delay shifts to timing endpoints. It combines these estimates with coarse-to-fine power screening to prioritize candidates for physical trials. TAPCO-G produced placement-legal, logic-equivalent implementations and outscored CERBERUS on all eight ASAP7 benchmarks from the MLCAD 2026 Contest, with a mean quality score gain of 5.516 points, and scored 21.648 points higher than TAPCO on average. These results demonstrate the effectiveness of the proposed co-optimization framework.

0.21

Dissecting How Die Scaling Breaks GPU Fine-grained Scheduling

cs.AR cs.DC ·2026-09-21 ·Xiaoze Fan, Jianhao Wang, Weihao Cui, Han Zhao, Zhuobin Huang +6 more
highly cited similarity 0.56
Abstract

Modern GPUs are no longer physically symmetric. Die scaling leads to both manufacturing-driven floorsweeping and cache and memory partitioning. The former creates chip-specific compute topologies, while the latter causes non-uniform memory access. These asymmetries are substantial. Topology-oblivious compute unit allocation can lead to up to 1.33x performance variation, while remote accesses increase HBM latency by up to 67% and nearly double L2 latency. However, these asymmetries are hidden behind the GPU's logical resource abstractions and can vary across chips. We develop lightweight characterization methods to uncover per-chip compute topology and memory affinity. We then use the discovered information to make existing fine-grained scheduling asymmetry-aware, considering not only how many resources are allocated but also which physical resources are assigned. Across full-GPU kernel execution, intra-application multiplexing, and inter-application co-location, asymmetry-aware scheduling improves mainstream kernels by up to 1.22x, multiplexed LLM inference by up to 14.3%, and avoids up to 1.33x performance variation.

0.39