CS Paper Radar

A Probabilistic Behavioral RTL Simulation Framework for Probabilistic Compute Fabrics

Zehuan Wang, Chaohui Li, Ruihong Yin, Xunqi Li, Chris H. Kim

cs.ET ·submitted 2026-11-18 01:33 UTC · v1

Abstract

Coupled oscillator Ising hardware can produce different solution qualities across repeated runs of the same problem, while a deterministic behavioral model used for the design yields a single outcome under fixed conditions. Capturing this stochastic variability during design time is essential for evaluating how closely simulation reflects silicon behavior. This work presents a probabilistic behavioral RTL simulation framework that introduces Gaussian timing variation into coupling delays. This variation changes oscillator timing during evolution, producing different outcomes across runs while retaining the existing chip control and readout blocks. The framework is evaluated against measurements from two chips: a 28-nm CMOS chip with 66 spins and a 16-nm FinFET chip with 49 spins, using 250 problems run 100 times repetitively. Compared with deterministic simulation, the model reduces the average absolute gap between sorted simulation and silicon outcomes by 14.0% and 28.4% on the two chips, respectively. These results demonstrate that a simple behavioral timing variation model can be a useful tool for designing and verifying probabilistic computing chips.

Comment
5 pages, 5 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Clock-Gating Insertion Strategies on an Open-Source MSP430 Core: A Reproducible PPA Study and a Gate-Level Simulation Caveat

cs.AR ·2026-08-31 ·Xingran Huang, Qiming Guo, Jinwen Tang, Wenqi Jia, Dongzheng Wang
publishedcode/data similarity 0.63
Abstract · 8 pages, 9 figures, 5 tables. Accepted for presentation at IEEE UEMCON 2026. Code and reproducibility artifact: https://github.com/yanyana11…

Clock gating, the standard technique for cutting dynamic power, is introduced either as hand-written behavioral clock gates at the register-transfer level (RTL) or as integrated clock-gating (ICG) cells inserted automatically during synthesis; the two are widely treated as interchangeable. In this paper we show, on a real open-source 16-bit microcontroller core (openMSP430) synthesized with a 32 nm standard-cell library, that they are not equivalent in practice: behavioral latch-based RTL gating is functionally correct in ideal RTL simulation (10/10 self-checking testcases, identical to the ungated baseline) yet fails at gate level: the gated multiplier result is never captured and reads zero, while tool-inserted ICG cells pass gate-level simulation cleanly (10/10). We root-cause the failure to a hold race introduced by the late latch+AND gated clock, and show it persists across eight simulation configurations including full Standard Delay Format (SDF) back-annotation, not a simulator-setting artifact. We then quantify the power/area/timing (PPA) impact of three gating strengths: RTL behavioral (Opt1), synthesis ICG (Opt2), and both (Opt3), against the ungated baseline, across four workloads and three process corners (ss/tt/ff). The benefit is corner-robust: ICG (Opt2) cuts dynamic power by 74-81% and total power by 25-30% at every corner. We also show that in this leakage-dominated 32 nm regime the total-power win comes from the area/leakage reduction that gating brings (leakage -24 to -30%), not from the large dynamic saving, which instead dominates active-mode energy. Our recommendation for low-power design on open-source cores is to prefer tool-inserted ICG cells over hand-written behavioral clock gates. The full flow (Design Compiler synthesis, PrimeTime PX power, and self-checking verification) is released as an open artifact.

0.73

TPCS: A Cycle-Level Simulation Paradigm with Native Execution Semantics for RTL Modeling and Generation

cs.AR ·2026-10-09 ·Chengzhen Meng, Xiaoyu Li, Chen Bai, Zhenyu Zhang, Hongjun Dai
similarity 0.60
Abstract · Submitted to IEEE TC

The growing diversity of domain-specific architectures and microarchitectural designs demands fast and accurate evaluation methods during early design stages. However, existing approaches suffer from a fundamental trade-off: high-level simulators offer speed but lack fidelity, while RTL-based tools provide accuracy at the cost of significant simulation overhead. This gap limits efficient pre-RTL microarchitecture exploration. Therefore, we propose Transaction-Pruned Cycle Simulation (TPCS), a novel modeling and simulation framework. It serves as a unified intermediate abstraction spanning microarchitecture modeling, cycle-accurate simulation, and synthesizable RTL implementation. TPCS organizes combinational logic as transaction-based function invocations and leverages host CPU control flow to naturally prune inactive logic, eliminating the need for explicit event scheduling or signal tracking. This enables cycle-accurate simulation with significantly improved performance. TPCS preserves structural correspondence with RTL and supports automatic generation of synthesizable designs. TPCS achieves 36$\times$-42$\times$ speedups over parallel Verilator on SMP systems and 3.4$\times$-7.2$\times$ over single-threaded Verilator on accelerators, with cycle-level waveform agreement on the evaluated traces. The generated RTL demonstrates comparable timing and area to handcrafted implementations, with relative changes of -4.7\% to +2.6\% in clock period and -3.3\% to +4.0\% in standard-cell area. By bridging the abstraction gap between high-level modeling and RTL design, TPCS enables a unified and agile pre-RTL workflow, allowing efficient microarchitecture exploration with both high performance and implementation fidelity.

0.30

Architecting the Next Generation of Asynchronous, Distributed GPUs for the AI Era

cs.AR ·2026-08-23 ·Junrui Pan, Weili An, Cesar Avalos Baddouh, Christin David Bose, Ni Kang +7 more
highly cited similarity 0.58
Abstract

The rapid evolution of machine learning workloads has fundamentally transformed GPU hardware, driving architectures toward Multi-Chip Module (MCM) topologies, asynchronous execution primitives, and persistent, multi-phase kernel behaviors. Despite these shifts, cycle-level simulation infrastructure has lagged behind, lacking the native capability to model the physical non-uniformity of modern GPUs alongside the massive scale of state-of-the-art AI workloads. To bridge this gap, we present a cycle-level simulation framework designed to accurately model modern GPU generations, including Ampere, Hopper, and Blackwell. Rigorously validated against physical silicon, the simulator achieves a 99% Pearson correlation coefficient and a 13.4% mean absolute cycle error on the H100 GPU. Utilizing this infrastructure, we conduct architectural case studies to evaluate emerging design trajectories, including chiplet topology scaling, expanded SRAM capacity and bandwidth, and inter-GPU prefetching strategies.

0.39

Predictable Modelling and Analysis of Software-defined Vehicle Implementations

cs.LO ·2026-09-15 ·Pavlo Tokariev, Yosri Ayari, Julien Deantoni
published similarity 0.57
Abstract

Software-Defined Vehicles (SDVs) rely on middleware-based communication and hardware abstraction mechanisms that introduce temporal uncertainty affecting end-to-end timing guarantees. Previous work proposed probabilistic architectural models for early timing analysis, but the representativeness of these abstractions with respect to SDV implementations remained unclear. This paper presents an experimental framework combining probabilistic design-time timing analysis with a monitored Kuksa-based implementation. The same reaction-time analysis is applied both to simulation and implementation traces, enabling direct comparison between predicted and observed timing behaviour. We additionally introduce a comparison methodology separating conservative coverage from predictive fidelity of timing distributions. The results show that the proposed abstractions remain representative under different middleware load conditions while preserving conservative timing guarantees, supporting incremental timing verification approaches for SDV platforms.

0.34

Timing-Driven Logic Remapping with Local Physical Context

cs.AR ·2026-10-01 ·Zijian Jiang, Hongyang Pan, Cunqing Lan, Keren Zhu
similarity 0.56
Abstract

The timing behavior of a mapped circuit depends on both its logic implementation and the physical environment in which that implementation is realized. Revisiting mapping decisions after placement therefore requires a search procedure that accounts for surrounding timing constraints, fanout loads, and interconnect effects. We study local remapping in this setting and develop a framework that couples discrete mapping search with physical implementation feedback. Timing-critical regions are isolated through bounded windows whose interfaces retain the context of the surrounding circuit. Within each window, a mixed-integer formulation jointly selects logic cuts, signal polarities, and library cells under a delay model informed by estimated locations and interconnect parasitics. A continuous relaxation filters the search space before discrete optimization produces alternative implementations with similar modeled timing and different structural choices. These implementations are reconstructed and assessed through legalization, routing-based parasitic estimation, and timing analysis. Physically validated improvements are incorporated into the design, and the updated context guides subsequent searches. The framework provides a systematic way to revisit local logic implementations while accounting for their interaction with an existing placement.

0.54

Simulation-Efficient Analog Circuit Yield Optimization via Monte Carlo Zeroth-Order Gradient Estimation

cs.CE ·2026-09-25 ·Liyan Tan, Yequan Zhao, Ben F. Jamroz, Ari Feldman, Zheng Zhang
theory similarity 0.55
Abstract

Yield optimization under process variation is expensive because each candidate design must be evaluated across many Monte Carlo SPICE samples. The resulting finite-sample yield is also piecewise constant in the design parameters, providing little local information for optimization. We introduce zeroth-order Monte Carlo stochastic gradient descent (ZO-MC-SGD), a black-box method that converts continuous specification margins into stochastic descent directions. Each update evaluates opposite design perturbations under shared process samples, allowing a small simulation batch to estimate a local direction without differentiating SPICE or fitting a global surrogate model. A Spearman rank-correlation test checks that the margin-based loss orders designs consistently with empirical yield. We prove that the estimator is unbiased for a Gaussian-smoothed surrogate and derive variance and sample-complexity bounds with no explicit dependence on process dimension. Across five analog circuit benchmarks with up to 30 design variables and 42 process variables, ZO-MC-SGD reaches a mean yield of 0.95 on four circuits within 50--200 simulations and the empirical yield ceiling on the fifth. Relative to the best of five black-box and learning-based baselines, it reduces the required simulation budget by up to a factor of eight.

0.34

Design Space Exploration of Backside Clock Meshes for 2 nm GAAFET BSPDN Technology

cs.AR ·2026-10-01 ·Wajid Ali, Muhammad Hadir Khan, Dalton Gaddy, Matthew Guthaus
similarity 0.55
Abstract

Clock meshes are used in high-performance VLSI designs to minimize skew and tolerate on-chip variation, but they spend scarce routing resources on premium metal layers. Backside power delivery creates a new option: it adds thick, low-resistance metal layers on the back of the wafer, and the power grid does not consume all of them. Flip-flops remain on the frontside; a backside mesh therefore cannot drive them directly, and every connection passes through a through-silicon via. We present the first design-space exploration of backside clock meshes, implemented in OpenROAD on GT2N, a 2 nm nanosheet technology. Four benchmarks (1,938 to 15,311 flip-flops) are explored with multi-objective Bayesian optimization, and every design point is verified by transistor-level SPICE simulation, since the cyclic mesh cannot be evaluated by static timing analysis. Across all four designs, the backside mesh consistently outperforms an identical frontside mesh, with on average 45% lower skew, 25% lower sink slew, 4.5% lower power, and 28% less frontside clock wiring, and its skew spread under 10,000-sample Monte Carlo is a third of the frontside mesh's.

0.28

A Surrogate Model for Variation-Aware Clock-Mesh Analysis and Design-Space Exploration using Graph Neural Networks

cs.AR cs.LG ·2026-11-01 ·Muhammad Hadir Khan, Wajid Ali, Arya Thottiparambil Manikandan, Matthew Guthaus
similarity 0.55
Abstract

Clock meshes are widely used in high-performance VLSI systems to minimize skew and tolerate On-Chip Variation (OCV) in nanometer technologies. However, analyzing meshes is difficult because reconvergent paths and multi-source drivers prevent static timing analysis (STA) tools from handling mesh loops, making SPICE the industrial standard. SPICE simulations are accurate but slow, so clock-mesh synthesis relies on approximate models that overlook critical effects such as non-linear buffer driving caused by input slew and input skew. We propose a Graph Neural Network (GNN) based surrogate model of the clock mesh with a new graph representation and a new architecture that predicts power while also improving the delay and slew predictions at the sinks and capturing the skew histogram under OCV. Trained on SPICE data and tested on unseen real designs, our model achieves average errors of $3.40$~ps in delay, $4.14$~ps in slew and $4.46$~ps in skew, compared with $6.28$~ps, $12.35$~ps, and $11.62$~ps for our prior model, and $74.37$~ps delay and $27.51$~ps skew for the approximate method used in current state-of-the-art works. Our model predicts power within $3.4\%$ of SPICE on average, while delivering $18\times$-$1706\times$ speed-ups over the approximate method under OCV modeling, enabling faster and more accurate clock-mesh design-space exploration. A case study on a real design further shows that our surrogate model finds buffering candidates that, at a balanced tradeoff, improves $99^{\text{th}}$-percentile skew by $49.1\%$, reduces power by $25.7\%$, and reduces area by $37.3\%$ at the cost of a $6.8\%$ increase in $99^{\text{th}}$-percentile maximum slew as compared to the state-of-the-art work.

0.21