CS Paper Radar

OrthoMark: Place Recognition with Point-Anchored Orthographic Height Mark

Haichuan Li

cs.RO cs.CV ·submitted 2026-11-16 05:52 UTC · v1

Abstract

LiDAR place recognition provides the loop closures of Simultaneous Localization and Mapping(SLAM). Perspective from Z-axis, a gravity-aligned scan is an orthographic map of the scene, and a revisit from another position and heading moves this map rigidly in the plane, a motion that a polar Fourier spectrum ignores and phase correlation recovers. Along the vertical, the heights of the returns describe the structures, but which heights are observed depends on the range, because the sensor's vertical field of view cuts nearby structures low; height thus misleads a global key, yet is decisive once two scans are aligned and compared cell by cell where they overlap. We present \method, a training-free method built on one principle: two LiDAR scans can only be compared through features computed from the same geometric surfaces in both scans. \method retrieves candidates with a translation- and rotation-invariant polar spectrum of the bird's-eye view (BEV), 1.9,KB per keyframe, and verifies each candidate by estimating its planar pose through phase correlation and scoring it with \emph{point-anchored height columns}: every BEV cell keeps a 16-bit mask of the heights of its own returns; within a session, the score is weighted by the expected overlap of the two scans' sensing ranges, computed from their distance. We show that this vertical link pays off in verification but hurts in retrieval, where what a height slice contains depends on the range to the structure. For single robot, \method has the highest AP of the training-free methods without 3D registration on the KITTI development sequences; across robots, on all multi-robot sequences, it matches or exceeds RING++ at 1/350 of its descriptor size and closes more inter-robot loops than the learned BEVPlace++ on all tests.

Closest papers

Nearest neighbours by meaning across the whole index.

UpDown-SC: Gravity-Canonicalized Dual-Envelope Scan Context for Indoor LiDAR Place Recognition

cs.CV cs.RO ·2026-09-24 ·Jie Xu, Yongxin Yang, Ziyi Jin, Kangjin Yu, Hongjun Huang +2 more
code/data similarity 0.74
Abstract · 8 pages, 7 figures, 2 tables. Code and evaluation artifacts: https://github.com/jiejie567/updown-sc

LiDAR place recognition is a key front end for loop closure and global relocalization, yet indoor retrieval remains difficult when attitude or sensor mounting height changes between mapping and query sessions. Scan Context stores the maximum height in each polar cell; indoors, broad ceilings can suppress the lower and mid-level geometry that distinguishes adjacent rooms and corridors. We present UpDown-SC, a training-free polar descriptor that first canonicalizes gravity and then represents two complementary surfaces: the upper envelope of lower/middle structures and the lower envelope of overhead structures. Their physical split is estimated once from a cell-balanced map height distribution and reused by every query. A mask-aware, non-uniform two-channel distance retains discriminative lower-level evidence while limiting sensitivity to its cross-session variation, without treating unobserved cells as zero-height measurements. Conventional Scan Context shortlisting and circular yaw alignment are retained, so retrieved hypotheses directly initialize geometric verification. Experiments across repeated indoor sessions, mounting-height changes, mixed outdoor-to-indoor trajectories, and an outdoor transfer sequence show more reliable first-choice retrieval on the indoor and mounting-height-varied sessions. A paired test finds a significant gain over Scan Context on the in-house sessions. UpDown-SC also gives the best or second-best F1max and AUPR under threshold-based acceptance while retaining a lightweight CPU front end. Continuous replay confirms that the retrieved hypotheses support metric prior-map localization. Code and evaluation artifacts: https://github.com/jiejie567/updown-sc.

0.46

HP2-SLAM: Adaptive Hybrid ICP for Robust and Efficient LiDAR SLAM

cs.RO ·2026-08-15 ·Nam Tran, Thu Tran, Hieu Phan, Thai Luu, Toan Nguyen +2 more
benchmark similarity 0.68
Abstract

Achieving robustness, accuracy, and efficiency simultaneously remains a central challenge in light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM). While learning-based approaches deliver strong benchmark performance, they often require extensive training, substantial computational resources, and struggle to generalize to unseen or degenerate environments. Geometry-based methods are efficient and interpretable, yet their performance degrades in planar or repetitive scenes due to limitations of standard iterative closest point (ICP) formulations. We present HP2-SLAM, a minimalist yet robust LiDAR SLAM framework built around a neighborhood-size adaptive hybrid ICP. Our key insight is a planarity-aware adaptive threshold that dynamically classifies correspondences based on local geometric structure and density, thereby enabling a principled balance between point-to-plane and point-to-point residuals. This formulation stabilizes alignment in both structured and degenerate environments without feature engineering, learning modules, or dataset-specific tuning. Integrated into a complete SLAM pipeline with submap management, loop closure detection, and pose graph optimization, HP2-SLAM consistently outperforms strong geometry-based baselines across publicly available datasets while maintaining real-time performance on commodity hardware. Our results demonstrate that carefully designed geometric adaptation can achieve strong generalization and robustness without sacrificing simplicity or efficiency.

0.04

Temporal-Aware Fusion for Robust Outdoor LiDAR Localization

cs.CV ·2026-09-29 ·Minghang Zhu, Zhijing Wang, Yuxin Guo, Chen Liu, Yongshu Huang +3 more
top venue similarity 0.68
Abstract · 10 pages, 8 figures, 6 tables, conference

LiDAR relocalization aims to estimate the global 6-DoF pose of a sensor in the environment. However, existing regression-based approaches often encounter limitations in dynamic or ambiguous scenarios, as they typically prioritize single-frame inference, leaving the potential of spatio-temporal consistency across scans not fully explored. In this paper, we propose a Temporal-aware Localization framework (TempLoc) designed to enhance the robustness of outdoor localization by effectively modeling sequential consistency. Specifically, a Global Coordinate Estimation module is first introduced to predict point-wise global coordinates and associated uncertainties for each LiDAR scan. A Prior Coordinate Generation module is then presented to estimate inter-frame point correspondences by the attention mechanism. Lastly, an Uncertainty-Guided Coordinate Fusion module is deployed to integrate both predictions of point correspondence in an end-to-end fashion, yielding a more temporally consistent and accurate global 6-DoF pose. Experimental results on the NCLT and Oxford RobotCar benchmarks show that our TempLoc outperforms state-of-the-art methods by a large margin, demonstrating the effectiveness of temporal-aware correspondence modeling in LiDAR relocalization.

0.30

DXPR: Depth-Based Vision-LiDAR Cross-Modal Place Recognition Using Vision Foundation Models

cs.CV ·2026-09-08 ·Yungsoo Han, Youngseok Jang, Seungwon Roh, Jeongyeon Seo, H. Jin Kim
similarity 0.67
Abstract · 8 pages, 6 figures, and 5 tables

We present DXPR, a depth-based cross-modal place recognition (CMPR) framework that uses vision foundation models (VFMs) to match monocular camera queries against a LiDAR map without modality-specific encoders. This enables robots and autonomous vehicles to robustly localize using only cameras within pre-built LiDAR maps, even under severe seasonal, weather, and illumination changes. The key idea is to convert both camera images and LiDAR scans into a unified depth image representation so that a single VFM backbone with an aggregation head can learn modality-invariant global descriptors. To make pairwise metric learning faithful to scene geometry, we introduce a geometry-aware overlap miner: after cross-modal scale alignment of camera and LiDAR depth, we forward-warp measurements between views to compute a pixel-level overlap score. This score relabels ambiguous pairs and adaptively modulates the positive margin in a multi-similarity loss to avoid overfitting on weakly overlapping views. Extensive experiments on KITTI odometry and Boreas demonstrate strong performance and robustness across seasons, weather, and day/night. On KITTI, DXPR achieves near-perfect Recall@1 on most sequences and outperforms prior CMPR baselines. On Boreas, DXPR achieves intra-sequence performance on par with a strong single-modal baseline (DINOv2-SALAD), while showing clear improvements in the more challenging inter-sequence setting. Compared with RangeBEV, our method consistently performs better in both intra- and inter-sequence evaluations, demonstrating robustness under diverse seasonal and illumination changes.

0.19

HiPFuse: Real-Time LiDAR Semantic Segmentation for Robotic Perception on Edge Devices

cs.CV cs.RO ·2026-11-10 ·Haiyang Wu, George Vosselman, Ville Lehtola
code/data similarity 0.67
Abstract · 13 pages, 6 figures

Real-time robotic perception requires accurate LiDAR semantics under limited resources. Bird's-eye-view (BEV) aggregation is efficient but can mix differently labeled surfaces in columns. We present HiPFuse, a point-BEV fusion framework that exchanges point and height-partitioned BEV features across horizontal scales, combining point-wise detail with 2D spatial context from one LiDAR scan. Fixed height assignments preserve separate vertical aggregation groups, with auxiliary supervision of initial BEV features using targets from the same 3D cells. A dual-scale BEV context module adds broader context from a coarser grid. On SemanticKITTI and MCD, HiPFuse achieves 63.7% and 62.5% mIoU at 14.2 and 22.4 FPS on Jetson AGX Orin, respectively, exceeding the 10 Hz scan rate. Separate training and evaluation show indoor applicability. Replacing only the baseline semantic front end with HiPFuse in fixed robotic systems reduces odometry absolute trajectory error RMSE by 10.6% on average across two outdoor sequences and increases accepted-loop recall by 8.7 percentage points on SemanticKITTI. Qualitative semantic maps show more continuous road labeling. Our code is available at https://github.com/haiyang2022/HiPFuse.

0.35

IndoorBEV: A Lightweight Real-Time LiDAR BEV Perception System for Indoor Mobile Robots

cs.RO ·2026-09-30 ·Haichuan Li
code/data similarity 0.66
Abstract

Efficient indoor LiDAR perception is challenging because mobile robots must understand cluttered three-dimensional environments under strict latency and memory constraints. Existing point-based and voxel-based methods often incur substantial computational overhead, whereas conventional bird's-eye-view (BEV) representations improve efficiency at the cost of discarding vertical geometric information. We present IndoorBEV, a lightweight LiDAR perception framework that mitigates this tradeoff through a height-aware BEV representation and geometry-conditioned feature fusion. IndoorBEV summarizes the vertical point distribution in each BEV cell using statistical height features and multi-frequency height encoding, allowing informative three-dimensional cues to be processed efficiently by two-dimensional convolutions. A lightweight encoder then integrates complementary geometric features with multi-scale local representations and compact global scene context. Decoupled dense prediction heads jointly produce semantic BEV maps and oriented object bounding boxes. IndoorBEV contains only 0.6M parameters and requires 2.3 MB of model storage. On an NVIDIA AGX Orin, it uses 21.52 MB of GPU memory per inference and achieves a mean latency of 169.6 ms under a 200 ms perception deadline, with a deadline miss ratio of 1.8\%. Evaluations on simulated scenes, real-world robot scans, and an open-source indoor point-cloud dataset demonstrate a favorable tradeoff among perception accuracy, latency, and memory consumption. These results indicate that explicitly encoding vertical geometry within a compact BEV representation provides an effective approach to resource-efficient indoor LiDAR perception.

0.24

Retrieve-to-Localize: Bridging Large Language Models and LiDAR Geometry for Spatial Grounding

cs.CV cs.RO ·2026-09-24 ·Byounggun Park, Giyong Moon, Jusung Kim, Soonmin Hwang
similarity 0.65
Abstract · 8 pages

LiDAR provides precise geometric information for spatial perception tasks such as object detection in autonomous driving and outdoor robotics. However, recognizing and localizing individual objects is not sufficient to answer questions that require composing spatial relations and grounding the intended target. Motivated by recent advances in large language models (LLMs) for autonomous driving, we leverage their language priors to interpret complex spatial questions and ground the referred target in LiDAR geometry. To support this spatial grounding capability, we introduce SpatialLiDAR-QA, which combines single- and multi-step relational grounding with complementary spatial understanding tasks. We further propose SpatialLiDAR-LM, which aligns LiDAR point features with an LLM and grounds target coordinates through language-conditioned, position-aware proposal retrieval and local point refinement. This design derives target coordinates directly from local LiDAR geometry rather than through textual language decoding. Experiments demonstrate substantial improvements over representative LiDAR--language models and multi-camera VLMs on precise coordinate prediction tasks. Our dataset and model training code will be publicly released.

0.26

Dr-LiSA: Direct Radar-Lidar Scan Alignment for SE(3) Localization

cs.RO ·2026-09-22 ·Alex Zhang, Daniil Lisus, Cedric Le Gentil, Timothy D. Barfoot
similarity 0.65
Abstract · 8 pages, 6 figures, paper under review

This paper introduces Dr-LiSA, a first-of-its-kind direct method for localizing 2D spinning radar intensity measurements in $SE(3)$ against 3D lidar maps. Radar-lidar localization combines the complementary strengths of the two sensing modalities: radar is robust to adverse weather and precipitation, while lidar provides high-fidelity 3D maps in favourable conditions. However, existing radar-lidar localization methods are restricted to planar $SE(2)$ localization and have generally fallen short of the accuracy achieved by lidar-lidar and even radar-radar systems. A key challenge is the substantial sensing-modality gap between radar and lidar, which observe and represent scene structure in fundamentally different ways. Dr-LiSA bridges this gap using a learned forward model that predicts radar measurements from a lidar submap at a candidate pose, enabling direct photometric alignment of predicted and observed radar scans in $SE(3)$. Dr-LiSA outperforms prior radar-lidar approaches in $SE(2)$ while achieving planar accuracy competitive with state-of-the-art radar-radar localization across more than 90 km of on-road data.

0.24