CS Paper Radar

ForceHarness: Turning Force into Action and Physics for Frozen Frontier Models

Ke Sun, Kevin Yuchen Ma, Yike Zhang, Yanzhe Chen, Mike Zheng Shou

cs.RO ·submitted 2026-11-16 13:44 UTC · v1
benchmarkcode/datacommunity pick

Abstract

Frontier multimodal models can now control robots zero-shot from images, yet many manipulation tasks depend on contact forces that images cannot show. Bringing force to an API-only frozen model raises two challenges. First, contact evolves much faster than an API model can decide, so the system must close the loop on force beneath the model. Second, a frozen model cannot interpret raw force streams, so force must be returned in a form the model can reason about. Therefore, we present ForceHarness, a harness that lets frozen models use force without demonstrations or finetuning. After calibrating hand force from a wrist sensor or joint torques alone, ForceHarness addresses the first challenge with self-terminating force primitives that regulate force on their own and return at a contact event. To address the second challenge, a physics translation layer turns each force trace into physical quantities with uncertainty as the tool result. To evaluate ForceHarness against expert force controllers and learned policies under identical conditions, we also build HiddenPhys, a seven-task MuJoCo benchmark with hidden physical variables. On a real arm without a wrist force sensor, ForceHarness raises the zero-shot success rate of GPT-6 Astra from 3.3% to 90.0%. In simulation, it adds 17.5 percentage points on the public ForceBench suite and 34.3 percentage points on HiddenPhys, surpassing force-aware policies trained on demonstrations on both benchmarks and matching hand-written expert controllers on HiddenPhys. Ablations further show that smaller models make significantly better decisions when given physical quantities rather than raw force values.

Comment
31 pages: 8-page main paper, references, and supplementary material. Project page: https://showlab.github.io/ForceHarness

Closest papers

Nearest neighbours by meaning across the whole index.

Dexterous In-Hand Object Pose Reaching with Learned Safety Filters

cs.RO cs.LGeess.SY ·2026-10-27 ·Ian Chuang, Hiya Shah, Vamsi Chilamkur, Iman Soltani, Claire Tomlin
code/data similarity 0.72
Abstract · 26 pages, 30 figures, 14 tables. Project page: https://ian-chuang.github.io/dexsafe/

Dexterous manipulation with multi-fingered hands is the next frontier of robotics, yet learned hand skills remain limited to simple grasps or basic repeated motions, such as rotating an object. As robots attempt more demanding in-hand maneuvers, safety, such as not dropping the object, becomes critical, yet it is rarely measured. We study in-hand object pose reaching, a task that demands diverse and difficult grasps: moving an object to almost any position and orientation within reach of the fingers, at any wrist orientation, through long sequences of consecutive goals. We present a recipe for training such policies for a LEAP hand in simulation without human data, built on a range of insights, from diverse resets and goals via generated grasp datasets to an adaptive friction curriculum. With careful system identification, the policies transfer zero-shot to the real hand, using either motion capture or a single wrist-mounted depth camera, and prove remarkably capable and robust. On top of the task policy, we add a learned residual safety filter with adjustable conservativeness, letting us tune the balance between performance and safety and greatly reduce object drops. In 13.3 hours of real-robot evaluation over 4,800 unseen goals across 4 objects and diverse wrist orientations, the state-based policy reaches 95.2% of goals within 2 cm and 0.4 rad, and the filter cuts its drops by 75% while still reaching 91.5% of goals. The policies can also spin a lightbulb held in an arbitrary pose, reach out-of-distribution goals, withstand fast arm motion and perturbations, and, needing only a wrist camera, serve as portable skills such as screwing in a lightbulb. We release the full recipe as a platform for studying performance, reliability, and safety in high-dimensional dexterous systems. Videos and more are available at https://ian-chuang.github.io/dexsafe/.

0.25

Language-Grounded Force/Torque Pretraining for Extrinsic Contact Perception

cs.RO ·2026-10-29 ·Kazuki Takahashi, Hiroaki Murakami, Ryota Sakuma, Mitsuhiro Kamezaki, Matthew Ishige +1 more
similarity 0.70
Abstract · 9 pages, 5 figures

Fine manipulation requires robots to recognize when a grasped object makes or changes contact with its environment, yet such extrinsic contact is not always directly observable from vision or local contact geometry. Force and torque signals carry this information, but also vary with object weight, grasp configuration, and robot motion, leaving it unclear whether they can provide a reusable representation of physical state. Here we show that bilateral six-axis force/torque histories can be pretrained as a semantically structured physical representation by aligning them with a frozen language space using supervision generated from simulated pick-and-place interactions. On unseen objects in simulation, the learned representation supports text-prototype readout of robot action, object weight, and grasp interaction. In real-world placement, unlabeled calibration enables contact and support-state recognition without updating the encoder, outperforming a vertical-force sign-reversal rule baseline. For connector insertion, an event absent from pretraining, low-rank adaptation improves data-efficient learning over training from scratch. These results show that force/torque histories can support both direct readout of known physical states and efficient adaptation to new extrinsic-contact events.

0.16

Facet-0: A Robotic Foundation Model for Contact-Rich Precise Manipulation

cs.RO cs.LG ·2026-09-01 ·Haoyuan Deng, Haichao Liu, Wenkai Guo, Yuan Ling, Zaijia Yang +4 more
code/data similarity 0.70
Abstract · Project page: https://pine-lab-ntu.github.io/facet-0/

Real-world robotic assembly at sub-millimeter tolerances demands spatial precision, compliant interaction, and robustness to contact failures. We present Facet-0, a robotic foundation model that predicts and values the contact consequences of its actions. Facet-0 unifies multimodal representation learning and reinforcement learning (RL) post-training around a joint action-wrench proposal: a causal wrench history is aligned with vision-language semantics and kinematic state, and flow matching generates each action chunk together with the future wrist-wrench profile it is expected to induce. Deployment rollouts train a distributional Action-Wrench Critic to distinguish motions with similar task progress but different contact outcomes, while phase-aware rewards and contact-selective credit concentrate policy improvement on decisive interactions. To accommodate part-specific dynamics, a lightweight bounded actor reuses the frozen representation for on-robot adaptation; RL remains defined over executable Cartesian actions, while an auxiliary wrench head preserves predictive, non-commanded action-contact coupling. Trained on ManuFacet-1K, a 1,000-hour force-synchronized corpus spanning three embodiments and multiple manufacturing cells, the bounded task-adapted system reaches 82% mean success on five sub-millimeter computer-assembly tasks, compared with 15% for the strongest baseline, with 0.5 mm placement accuracy and 50 ms command latency.

0.51

The Bitter Lesson Comes to Robotics

cs.RO ·2026-10-18 ·Christopher Leet, Achyutha Menon, Sravanthi Machcha, Sven Koenig, Tzu Kit Chan +1 more
benchmark similarity 0.70
Abstract · Submitted to the Workshop on The Action Gap (TAG) at CoRL 2026, updated with Gemini Flash 3.6 and Gemini 4 Argon

General purpose multimodal language models (LMs) are increasingly capable of directly controlling robotic arms (e.g., by commanding end effector poses) to manipulate their environment. Tracking the development of these capabilities is important for understanding their potential benefits, such as improving industrial automation, and risks, such as enabling malicious users to produce dangerous chemical or biological agents. To this end, we investigate the ability of frontier multimodal LMs to directly control physical robotic arms. We evaluate nine models at multiple reasoning-effort and service-tier settings on six manipulation tasks taken from the RoboDojo benchmark. To our knowledge, this is the first systematic comparison of a broad range of frontier LMs across a common suite of manipulation tasks on physical hardware. We find that current frontier models can directly control real robotic arms to perform a variety of manipulation tasks but are not yet precise or efficient enough to complete them within a practical action budget. However, these capabilities are improving rapidly: performance increases on our benchmark between July and October 2026 (inclusive) correspond to a performance doubling time of 53.9 days, while the best recorded execution rate increased by a factor of 4.4 and the lowest recorded execution cost fell by a factor of 6.2. These trends raise the possibility that the Bitter Lesson is coming to robotics; the capabilities of embodied general purpose LMs may one day be comparable to those of more specialized models.

0.39

FR-VLA: Implicit Force Reasoning VLA for Contact-Rich Manipulation

cs.RO ·2026-10-19 ·Jiaju He, Zhiyuan Yang, Ruyang Han, Jiahong Tang, Zhiping Lin +1 more
published similarity 0.70
Abstract · Accepted to CoRL 2026

Integrating force awareness into Vision-Language-Action (VLA) models involves not merely encoding wrench measurements as an additional modality, but determining when and how strongly physical interaction should influence robot action generation. Existing VLAs that use force typically inject it through a fixed pathway, without explicitly determining when it is relevant to the current action. This calls for an intermediate force relevance mechanism inside the VLA, in which visual-language context estimates the relevance of physical feedback to the current task before force enters the action pathway. FR-VLA addresses this gap with a Vision-Language Force-Reasoning Model that uses learnable force query tokens to derive a force admission signal grounded in visual-language context, and uses this signal to modulate an external tokenized force pathway for action generation. In real-world experiments on five contact-rich tasks across two robotic platforms, FR-VLA achieves the highest mean success rate over six evaluated stages, and trajectory visualizations show that its force admission varies with the interaction phase.

0.24

Robot Learning with Visual Predicted Force

cs.RO cs.AI ·2026-10-03 ·Haonan Chen, Feiyang Wu, Yuxiang Ma, Mustafa Mete, Pengfei Ye +9 more
similarity 0.69
Abstract · 9 pages, 8 figures. Project Website: https://visual-force.github.io/

Force-aware manipulation typically relies on specialized force or tactile sensors. We show that force-aware manipulation can instead be achieved through visual force prediction from the deformation of a compliant Fin Ray gripper. Our approach trains two models. First, we train a visual force estimator on calibration data and use it to annotate task demonstrations with force estimates. Second, we train an action--force proposal policy on these force-augmented demonstrations to jointly generate candidate robot actions and their associated forces. At test time, we sample candidate actions and the forces they are expected to produce, then execute the action whose predicted force is closest to a target from the demonstrations. We evaluate our approach on berry picking, empty-can grasping, in-hand reorientation, and plug insertion. Our results show that visual force prediction can guide inference-time action selection for contact-rich manipulation without requiring force or tactile sensors at deployment.

0.25

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.69
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29

Reins: Frontier Multimodal Models Driving Real Robot Arms on Long-Horizon Tasks, Zero-Shot

cs.RO ·2026-11-12 ·Pengfei Ye, Zhiyang Dou, Yuxiang Ma, Haonan Chen, Heng Yang +1 more
similarity 0.69
Abstract

Frontier models such as GPT-6.1 Sol, GPT-6 Astra and Claude Opus 5.5 can now plan and call tools, yet they still struggle to drive real robots through long-horizon, contact-rich manipulation, blind while the arm moves and while they think. We present Reins, a harness in which an off-the-shelf model operates a dual-arm robot with 3D perception tools and atomic actions that report contact and grip. The model chains actions in one call, each with a condition that must hold, stopping at the first that fails; a second instance, the narrator, watches the cameras continuously and reports what changed with every result. From images, Reins also builds a simulation-ready twin of the scene for continual policy learning. With natural-language prompts and no task-specific code, GPT-6.1 Sol succeeds in 88% of real episodes on five tasks; without the harness, it fails every shell game, taking 8 times as long. Three frontier models perform alike but differ in tracking a scene that changes while the actor thinks. Code will be released upon publication.

0.25