CS Paper Radar

From very fine Vertical Resolution to Range Super-Resolution on BIOMASS P-BAND SAR Data

Yanghai Yu, Stefano Tebaldini, Yang Lei, Fabio Rocca

eess.SP ·submitted 2026-11-16 16:31 UTC · v1

Abstract

This paper demonstrates range super-resolution over arid regions using SAR tomography data with very fine vertical resolution from the European Space Agency's BIOMASS mission. As the first civilian spaceborne P-band SAR mission, BIOMASS is operating with a bandwidth limited to 6~MHz by International Telecommunication Union regulations, yielding a native slant-range resolution of approximately 25 m. The large spatial baseline data acquired during the commissioning phase in July and August 2025 provide a valuable opportunity to enhance range resolution based on the InSAR wavenumber shift principle. According to this principle, a wider effective bandwidth can be synthesized by combining complementary sub-bands of the ground reflectivity spectrum sampled across acquisitions at different look angles. Unlike existing literature, this paper offers a novel interpretation of this problem from the perspective of SAR tomography. Furthermore, the proposed method also accounts for residual topography errors. The range resolution enhancement performance is validated using all 20 available acquisitions from the July-August 2025 commissioning phase over Lop Nur, China, and Wadi al-Hayat, Libya, achieving spatial detail comparable to optical satellite imagery in a grid finer than 2 m. Furthermore, the reconstructed range spectrum of the central Libyan oasis exhibits an effective bandwidth exceeding 70 MHz. The point spread function (PSF) of a point like target in the scene demonstrates a slant-range resolution finer than 2.1 m, representing more than a twelvefold improvement over the native resolution.

Comment
5 pages, 7 figures. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

Assessing BIOMASS Radiometric Stability using Permanent Scatterers

eess.SP eess.IV ·2026-10-27 ·Marco Manzoni, Francesco Salvaterra, Claudio Maria Prati, Stefano Tebaldini
similarity 0.62
Abstract

Monitoring the relative radiometric stability of the European Space Agency's BIOMASS P-band synthetic aperture radar (SAR) requires separating instrumental and processing effects from temporal changes in the scene backscatter. This study investigates the use of permanent scatterers (PSs) as opportunistic references for estimating residual radiometric gains without dedicated calibration targets. The PS-based calibration (PSCal) framework combines amplitude-based scatterer selection with iterative maximum-likelihood gain estimation. Simulations assess detection and estimation performance under the limited number of acquisitions available in BIOMASS stacks, highlighting the importance of stringent selection thresholds and the dependence of estimation accuracy on scatterer abundance and signal-to-noise ratio. The approach is applied to datasets over Nairobi, Kenya, and Cordoba, Argentina. Over Nairobi, PSCal identifies an approximately 1 dB radiometric anomaly subsequently traced to a defect in radio-frequency interference mitigation, while the remaining acquisitions exhibit estimated gain variations generally within 0.1 dB. Over Cordoba, twelve acquisitions spanning two mission phases separated by approximately eight months yield residual gain variations on the order of 0.1 dB despite pronounced changes in the scene backscatter and acquisition geometry. Results were observed to be consistent with measurements from the BIOMASS Calibration Transponder (BCT) installed in New Norcia (Australia). These results demonstrate the potential of carefully selected P-band PSs to complement dedicated calibration infrastructure for relative radiometric monitoring and the detection of processing anomalies.

0.30

3D Radar Imaging from the UAV Nadir

eess.SP ·2026-09-04 ·S. Hamed Javadi, Hichem Sahli, André Bourdoux
top venue similarity 0.59
Abstract · Accepted for publication in IEEE Transactions on Radar Systems

Radars improve the sensing robustness of UAVs by operating under poor lighting and weather conditions and seeing through occlusions such as vegetation. However, they suffer from poor angular resolution, which can be addressed using synthetic aperture radar (SAR) algorithms. State-of-the-art UAV SAR methods operate at a depression angle and are not suitable for sensor fusion applications where the data are collected from areas directly below the UAV (i.e., the UAV nadir). In this paper, we present an interferometric SAR (InSAR) framework for reconstructing 3D images from the UAV nadir using a low-cost multi-input-multi-output (MIMO) mm-wave radar. Additionally, an effective method based on the phase gradient autofocus (PGA) is presented for compensating the phase error across the virtual receive antennas. We demonstrate the effectiveness of our 3D imaging algorithm in both simulation and experimental scenarios.

0.35

LC-TSRNet: A Land-Cover-Guided Two-Stage Network for Annual MODIS Surface Reflectance Time Series Reconstruction

cs.CV ·2026-10-18 ·Wenjuan Zhang, Xuesong Ma, Zhen Li, Meixiang Wang, Caimeng Yi +3 more
similarity 0.55
Abstract

MODIS surface reflectance (SR) products often suffer from data gaps due to cloud contamination and sensor malfunctions, limiting their applications in long-term and large-scale studies. Most existing methods rely on cloud-free observations from optical time series or introduce SAR time series as auxiliary information. However, due to the coarse spatial resolution of MODIS, cloud-free reference images are difficult to obtain, and SAR imagery is not well matched to the spatial resolution of MODIS, making it difficult to provide effective prior constraints. To address these issues, this study proposes LC-TSRNet for seamless reconstruction of annual MODIS SR products. In the first stage, an annual land cover map is introduced as prior knowledge, and CSPM is designed by leveraging the spectral similarity within identical land cover types, thereby providing prior spectral constraints for missing regions. In the second stage, to address large-area, persistent, and overlapping gaps in MODIS imagery, SMRM is designed to adaptively exploit and integrate multi-scale spatiotemporal contextual information. Meanwhile, to address the limited collaborative utilization of spatio-temporal-spectral information, 3DAM is designed to impose cross-dimensional joint constraints. Considering the lack of publicly available MODIS sample datasets, this study constructs the AIRMOD-TSR dataset. Extensive experimental results show that LC-TSRNet outperforms the comparison methods and achieves better reconstruction accuracy and spectral fidelity. Under the spatially adjacent scenario, LC-TSRNet improves PSNR by 0.56 dB and reduces SAM by 0.13°. The vegetation monitoring application further verifies the practical value of the reconstructed SR time series.

0.21

Imaging-Communication Trade-off in VLEO ISAC-SAR Using CP-OFDM

eess.SP ·2026-09-16 ·In-Hyeok Lee, Kawon Han
similarity 0.54
Abstract · 13 pages, 13 figures

This paper investigates the imaging--communication trade-off in very-low-Earth-orbit (VLEO) integrated sensing and communication synthetic aperture radar (ISAC-SAR) using cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) as the shared waveform. We develop a unified analytical framework that jointly accounts for random communication payloads, range-dependent CP deficit across the swath, and slow-time-varying platform Doppler over the synthetic aperture. The resulting signal model separates the coherently retained component from inter-carrier interference (ICI) and inter-symbol interference (ISI) through common subcarrier-coupling coefficients. By propagating these effects through receive filtering, range compression, and azimuth focusing, we derive image-domain statistics for matched- and reciprocal-filter receivers. Based on the derived statistics, an effective noise-equivalent sigma zero (ENESZ) is formulated to characterize data-dependent sidelobes, ICI/ISI, and noise enhancement on a common backscatter-equivalent scale. The analysis reveals that the CP duration acts as a system-level design parameter bringing scalable trade-off. Increasing the CP improves coherent retention and suppresses range-dependent interference, but simultaneously reduces coherent processing gain and communication payload throughput. Accordingly, the sufficient-CP duration does not generally coincide with the imaging-optimal CP duration. End-to-end simulations for a representative VLEO scenario validate the derived image-domain statistics and demonstrate the resulting trade-off between ENESZ and communication throughput as a function of CP duration.

0.18

Transparentize A Shallow Cryosphere: High-Resolution Subsurface Imaging using UAV-Borne GPR A review and prospective

eess.SP ·2026-09-16 ·Wenhao Luo, Tong Hao, Qian Ma, Chen Lv, Zhiyi Cao
published similarity 0.53
Abstract · IEEE Geoscience and Remote Sensing Magazine Copyright 2026 IEEE. Personal use of this material is permitted. However, permission to use this…

Accurate characterization of shallow cryosphere subsurface structures is critical for understanding snow and ice dynamics, evaluating environmental hazards, and informing climate-related decision making. Recent advances in unmanned aerial vehicles (UAVs) and compact radar instrumentation have enabled UAV-borne ground penetrating radar (GPR) as a non-contact alternative for subsurface sensing in these environments. By combining the safety-constrained mobility of unmanned aerial platforms with the penetration capability of radar, UAV-borne GPR facilitates rapid, wide-coverage and flexible surveys over snow and ice surfaces in cryosphere that are often inaccessible to traditional ground-based methods. This contribution reviews recent progress in UAV-borne GPR for cryosphere investigations, encompassing system architectures, operational strategies, and representative deployment practices. Furthermore, key data-processing methodologies are summarized for their roles in enhancing subsurface imaging and reconstruction fidelity. A case study from Mochou Lake in East Antarctica, illustrates these capabilities, yielding an ice-thickness estimation error of only 0.03 m when benchmarked against drilling measurements. Finally, the remaining challenges, particularly those associated with scanning coverage, real-time data processing, and detection accuracy, are discussed for future cryosphere applications.

0.37

Interpretable Landsat-to-Hyperspectral Dual Super-Resolution Without Large Matrix Inversion

eess.IV eess.SP ·2026-08-24 ·Chia-Hsiang Lin, Jian-Kai Huang, Si-Sheng Young, Wei-Cheng Zheng
publishedcode/data similarity 0.51
Abstract · 17 pages; accepted for publication in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing (JSTARS). Source code…

Direct acquisition of global hyperspectral images (HSIs) is infeasible given contemporary hardware facilities and limited resources, while global hyperspectral monitoring is critical for remote sensing applications. A more economical approach is to interpretably convert global Landsat-8/9 multispectral images into NASA's AVIRIS-level HSIs. This conversion involves both spatial super-resolution (SpaSR, 30-m to 15-m) and the highly ill-posed spectral super-resolution (SpeSR, 7-band to 172-band), collectively referred to as dual super-resolution (DualSR), whose duality between SpaSR and SpeSR has recently been established. Existing SpeSR methods, mostly designed to reconstruct CAVE-level HSIs with only 31 visible bands, are not applicable to the AVIRIS-level task involving 172 visible, near-infrared, and shortwave-infrared bands. This motivates us to customize an interpretable alternating direction method of multipliers network (ADMM-Net) using the Woodbury W-Lemma and a spectral continuity prior. Unlike conventional generative SpaSR, we employ a panchromatic sharpening strategy to recover physically grounded spatial details. However, this strategy induces very large matrix inversions (LMIs), with dimensionality proportional to the number of pixels, even after applying the W-Lemma. We resolve this issue by designing an LMI-free proximal gradient descent network (PGD-Net). Consequently, the proposed PGD-ADMM interpretable network (PAINT) achieves substantial improvements in both computational complexity and reconstruction performance. Beyond state-of-the-art reconstruction performance, PAINT improves Landsat classification from 78.98% accuracy and 76.06% kappa to 92.16% accuracy and 90.98% kappa.

0.69

SPIRIT: Sparse Physics-Informed Inverse Rendering for SAR Imaging

cs.CV cs.AI ·2026-10-01 ·Yimeng Liu, Maolin Gan, Jingkai Lin, Jialuo Du, Mi Zhang +1 more
similarity 0.50
Abstract

Radio-frequency (RF) and wave-based imaging systems play a critical role in sensing under adverse conditions, but are fundamentally constrained by a trade-off between collection speed and spatial resolution. Reducing measurements to enable rapid collection of fragment geometric information across sensing dimensions, leading to highly non-injective inverse problems that destabilize conventional image-domain reconstruction and super-resolution methods. Synthetic aperture radar (SAR) exemplifies this challenge in sparse-aperture sampling. We introduce SPIRIT, a physics-informed inverse rendering framework for sparse-aperture SAR. Rather than enhancing formed images, SPIRIT reconstructs an explicit three-dimensional surface. By adopting an optimization strategy and explicitly modeling visibility, phase coherence, and wave propagation, SPIRIT aggregates distributed geometric features across sparse aperture views into a coherent reconstruction. Extensive experiments on synthetic and real-world data demonstrate that SPIRIT recovers accurate geometry and signal under extreme sparsity, reducing data collection by over 90% while achieving low geometric and signal error and consistently outperforming baselines.

0.17

OrTeN: Neural Inverse Graphics for Joint Terrain and Line-scan Camera Trajectory Reconstruction

cs.CV cs.GRcs.LG ·2026-10-16 ·Josef Biberstein, Sertac Karaman
similarity 0.50
Abstract

Digital terrain maps (DTMs) are used for landing site selection, terrain-relative navigation, and geological analysis in planetary exploration. Existing state-of-practice reconstruction techniques for creating DTMs from satellite imagery use multi-view stereo, requiring complex pipelines for dealing with camera error, changing illumination, and images with limited disparity. This work introduces Orbital Terrain Networks (OrTeN), a DTM construction method that uses neural inverse rendering to jointly optimize a textured height map and orbital camera corrections from line-scan satellite images. OrTeN operates directly on calibrated line-scan images with pixel values expressed as radiance factor (I/F) and corrects both broad trajectory pose inconsistencies and high-frequency pointing jitter jointly with surface reconstruction during training. Surface-projected patch normalized cross-correlation (NCC) enforces consistency between observations of the same terrain, refining an initial rough reconstruction. A semi-empirical reflectance model and shadow rendering are used to fit surface appearance from multi-date imagery with differing solar illumination. OrTeN requires only calibrated line-scan images and initial camera poses and does not use any structural priors including ranging/depth measurements or initial rough DTMs. OrTeN is evaluated on four planetary imagery datasets. Aligned terrain RMSEs are 2.35 m at Jezero Crater, 2.82 m at Gale Crater, 16.18 m at Olympus Mons, and 0.43 m at McGetchin Crater.

0.21