CS Paper Radar

A Lightweight Hybrid Approach for Milling Force Reconstruction from Internal Machine Signals

Eric Hirsch, Christian Friedrich

cs.LG ·submitted 2026-11-19 11:06 UTC · v1
unusual

Abstract

Data-driven monitoring based on milling force can enable advanced manufacturing services including process optimization and condition monitoring. However, industrial implementation is often hindered by costly and intrusive hardware and large training data requirements. This paper therefore presents a hybrid approach using machine-internal signals and machining metadata to enable force-based monitoring on brownfield machines without additional sensors. Commonly available machine signals have relatively low sampling rates and cannot directly represent high-frequency milling-force variations, especially at higher spindle speeds. Instead of learning the complete force signal, which would increase model complexity, data requirements, and overfitting risk, a supervised machine-learning model predicts only the average milling force from selected machine-signal features and machining parameters. This low-frequency estimation parameterizes a static milling force model that reconstructs the force behavior over one spindle revolution. Although the static model does not reproduce all dynamic effects, it captures the force distribution, load levels, and angular regions of highest tool engagement. The approach is evaluated on one milling machine across varying process parameters, engagement conditions, cutting tools, and two workpiece materials. Dynamometer measurements are required only for development and validation. Ridge regression achieves an $R^2$ of $0.984$ and $0.991$ for average-force prediction on the test data ($\bar{F}_x$ and $\bar{F}_y$). The reconstructed force behavior over one spindle revolution achieves an $R^2$ of $0.962$ and $0.982$ ($F_x$ and $F_y$) compared with the reconstruction based on measured force features. The method provides a cost and computationally efficient basis for process monitoring, tool condition assessment, and process optimization on existing machines.

Comment
Author-prepared preprint. 7 pages, 4 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Domain Joint-Embedding Pretraining For Heterogeneous Industrial Time Series

cs.LG cs.AI ·2026-11-02 ·Jonathan Adam Rico, Nagarajan Raghavan, Senthilnath Jayavelu
similarity 0.55
Abstract · Submitted to International Conference on Acoustics, Speech, and Signal Processing (ICASSP) on Sept. 24, 2026

Industrial predictive maintenance and manufacturing tasks frequently contain abundant sensor measurements, but with limited labeled data. We investigate cross-domain self-supervised pretraining using joint-embedding predictive architecture for heterogeneous industrial time series (JEPA-HITS), which learns one encoder from various domains such as battery, semiconductor chemical mechanical planarization (CMP), computer numerical control (CNC) machining, and bearing while preserving dataset-specific temporal scales. We evaluate representation reuse on regression and classification problems under reduced-label downstream training, and leave-one-domain-out (LODO) pretraining. Compared with the same architecture initialized randomly, LODO pretraining reduces RMSE from 10.72 to 7.95 on battery remaining useful life (RUL), 4.34 to 3.89 on CMP, and 13.53 to 11.72 on tool wear regression, while improving bearing fault diagnosis macro-F1 from 0.547 to 0.737. Overall results suggest that unlabeled time series measurements from heterogeneous industrial processes can provide reusable representations for downstream learning with limited labeled data.

0.17

Spectrogram-Based CNN Autoencoder for One-Class Anomaly Detection in Machining Vibration Signals

cs.LG ·2026-11-07 ·Sebastian Zeleny, Christian Gawron
published similarity 0.55
Abstract · 29 pages, 14 figures

This work presents a one-class anomaly detection framework for vibration-based condition monitoring in machining processes using a convolutional neural network autoencoder. Three-axis vibration signals acquired during industrial broaching are transformed into time--frequency spectrograms and combined into a compact three-channel representation, enabling convolutional feature learning on multivariate time-series data. The autoencoder is trained exclusively on normal process data and detects anomalous strokes based on reconstruction errors. Labeled validation data are used for threshold calibration and an independent test set is reserved for final performance evaluation. To improve sensitivity to short-lived process instabilities such as chatter, a localized residual-based metric termed Segmented Vertical Error (SVE) is introduced. Experimental results on approximately 10{,}000 broaching strokes show a clear separation between normal and anomalous process conditions under strong class imbalance. The processing pipeline is additionally evaluated on an external public turning dataset as a proof of concept, indicating preliminary applicability beyond the original broaching setup. The results suggest that spectrogram-based autoencoder models can provide a practical and scalable basis for one-class anomaly detection in industrial vibration monitoring.

0.34

IPM-FM: A Foundation Model with Consensus Feature Selection for Industrial Process Monitoring

cs.LG cs.AI ·2026-09-08 ·Liang Cao, Weide Liu, Yan Qin, Jun Cheng, Weisi Lin +1 more
published similarity 0.54
Abstract

Industrial process monitoring is fundamental to the safety and economic performance of modern process plants. Current practice remains a one-task-one-model paradigm that is label-inefficient and prone to degradation under operating drift. Foundation models have reshaped language, vision, and generic time-series forecasting, but it has not been adapted to industrial process monitoring. This setting poses domain-specific challenges, including safety-critical decisions and asymmetric sampling between process variables and laboratory measurements. We propose the industrial process monitoring foundation model (IPM-FM). It first learns general-purpose representations from unlabeled industrial process data through self-supervised pretraining, then adapts to specific monitoring tasks using a small amount of task-labeled data, and finally produces calibrated predictions through an uncertainty-aware prediction head. IPM-FM integrates a self-supervised Informer backbone with a multi-criteria consensus feature selector, a recursive lag-feature regression head, and a calibrated Monte Carlo dropout uncertainty module. On a seven-year hydrotreater dataset for diesel flash-point soft sensing, IPM-FM attains an RMSE of 2.99, $R^2$ of 0.50, and 97\% coverage of its 95\% predictive interval, outperforming the strongest classical and from-scratch sequence baselines by 8.3\% and 14.6\% in RMSE respectively, supporting the viability of a unified pretraining--adaptation framework for industrial process monitoring.

0.40

Federated Learning for Distributed CNC Tool Wear Prediction

cs.LG cs.AI ·2026-08-11 ·Afsana Khan, Morris Stallmann, Marcin Pietrasik, Charalampos S. Kouzinopoulos, Anna Wilbik
similarity 0.53
Abstract

Tool wear prediction is an important task in CNC machining, where accurate monitoring of tool condition supports product quality and process reliability. Machine learning methods have shown potential for this task, but their use in industrial environments is limited by the distributed nature of machining data and by restrictions on data sharing between machines, sites, or organizations. Federated learning offers a suitable framework for this setting by enabling collaborative model training without transferring raw operational data. However, it is open if federated learning can lead to accuracy gains in CNC tool wear prediction that justify the increased complexity of such a system. In this experimental study, real tool trajectories are distributed across simulated clients to represent a federated learning scenario. The federated models are compared against centralized references and local client baselines. Results show that federated learning achieves performance close to centralized learning and improves significantly over local client models. These findings indicate that federated learning can support collaborative tool wear prediction in distributed CNC manufacturing environments and the increased complexity is justified.

0.04

Parameter Estimation in Machining Dynamics with Regenerative Delay and Nonsmooth Friction using Physics-Informed Neural Networks

cs.LG nlin.CD ·2026-10-05 ·Meiyazhagan Jaganathan, Vikram Pakrashi, Aasifa Rounak
similarity 0.53
Abstract

A multi-domain eXtended Physics-Informed Neural Network (XPINN) framework is developed for nonsmooth Delay Differential Equations (DDEs). This is the first implementation to demonstrate the efficacy of partitioning the temporal domain into subdomains of integer multiples of the characteristic time delay and progressively training the associated subnetworks while freezing previously learned parameters. The efficacy of the proposed framework is demonstrated using a machining dynamics model that incorporates both regenerative and nonsmooth frictional effects. Results demonstrate that the proposed multi-domain XPINN framework leads to better solution reconstruction in DDEs and improved parameter estimation compared to a generic PINN (SPINN) formulation. The proposed method works particularly well for extended temporal domains and non-constant history functions. The robustness of inverse XPINN (I-XPINN) is also assessed using reference data contaminated with Gaussian measurement noise. Results indicate that I-XPINN remains resilient to measurement noise and the physics-informed constraints guide the network toward accurately recovering the underlying dynamics. This demonstrates, for the first time, the potential of the proposed framework for reliable parameter identification in DDEs characterised by nonsmoothness and large time delays.

0.24

Self-Supervised Attention-Based Virtual Metrology for CMP MRR Prediction

cs.LG cs.AI ·2026-11-12 ·Jonathan Adam Rico, Nagarajan Raghavan, Senthilnath Jayavelu
similarity 0.53
Abstract · Submitted to the IEEE International Symposium on Semiconductor Manufacturing (ISSM 2026)

Chemical mechanical planarization (CMP) is a critical semiconductor manufacturing process where material removal rate (MRR) is a key metric for process monitoring and advanced process control (APC). Virtual metrology enables MRR estimation from process time series signals, supporting run-to-run(R2R) control and process optimization while reducing reliance on physical metrology. Existing approaches typically rely on simplified linear assumptions or require handcrafted feature engineering. In this paper, we propose Global Regression Pretraining(GREP), a self-supervised, attention-based framework for CMP MRR prediction. GREP learns temporal representations from unlabeled sensor signals through global proxy-target regression, followed by supervised fine-tuning for MRR estimation. The framework is evaluated against a feature-engineered supervised baseline under three conditions: limited labeled data, sensor noise, and temporal process drift. Experiments on the PHM 2016 CMP dataset demonstrate competitive performance under limited labeled-data conditions, with improvements in selected cases and performance largely comparable to the baseline across different labeled-data fractions. Both models exhibit relatively small changes in prediction error with increasing noise, while GREP achieves a 17.0% RMSE reduction in the final temporal interval.

0.18

Acoustic Anomaly Detection for Early Identification of Drill Jamming

cs.LG ·2026-11-05 ·Maria Beatriz Silva, Lucas Edson Silva de Araújo, Sergio F. Chevtchenko, Ermeson Andrade, Danilo Araujo +1 more
publishedbenchmarkdataset similarity 0.52
Abstract · Accepted for publication at IEEE INDIN 2026. 8 pages, 6 figures. (c) 2026 IEEE. Personal use of this material is permitted

In the context of Industry 4.0, predictive maintenance is essential to minimize unplanned downtime and ensure operational safety. In machining processes, drill jamming is a critical failure that compromises both workpiece quality and tool integrity. This work proposes an acoustic anomaly detection system using ultrasonic sensors to identify pre-failure patterns in Computer Numerical Control (CNC) machining. We release a public dataset of time- and frequency-domain acoustic features from 17 drills, and benchmark semi-supervised autoencoder-based normality modelling against supervised XGBoost classification using Leave-One-Drill-Out validation. The results demonstrate that the Autoencoder is highly effective for industrial safety, achieving a Recall of 1.00 and a consolidated F1-score of 0.81. Furthermore, the threshold-independent analysis shows that the Autoencoder better separates normal and pre-failure acoustic patterns, achieving a consolidated AUC of 0.8294, compared with 0.7559 for the supervised model under inter-tool covariate shift. In contrast, the supervised XGBoost achieved an average F1-score of 0.55 and failed to detect failures in some of the evaluated drills. The findings highlight that the ultrasonic spectrum provides a reliable window for identifying incipient mechanical instabilities, and the AE model offers a robust safety envelope by anticipating all jamming events across the tested drill bits.

0.34

CNCGEN: A Dataset and Framework for Machining Process Planning and Toolpath Generation from B-rep Models

cs.LG ·2026-09-30 ·Xiaolei Zhou, Boyi Lin, Yuchao Feng, Jianwei Zheng
similarity 0.52
Abstract · 21 pages, including references and appendix

Learning to generate machining process plans and toolpaths from B-rep CAD requires coupling discrete operation decisions with continuous tool motion as the workpiece evolves. Correctly predicting an operation sequence does not by itself ensure correct material removal, because each toolpath acts on the stock left by preceding cuts. We formulate this problem around persistent manufacturing objects: object identity determines the target of an operation, while the evolving stock state conditions the generation of its toolpath. Based on this formulation, we propose CNCGEN, a dataset and learning framework for three-axis machining. CNCGEN-Dataset contains approximately 50k geometrically verified synthetic machining flows and 800 held-out real CNC records. Each flow aligns B-rep geometry with object-referenced operations, parameterized toolpaths, intermediate stock states, and verification outcomes, enabling supervision of the correspondence between planning decisions and their geometric effects. CNCGEN generates operations and toolpaths for selected objects step by step, updating a compact machining state to guide subsequent predictions. During training, a learned surrogate verifier provides material-removal feedback that links local predictions to their geometric consequences. Experiments on synthetic and held-out real CNC records show that CNCGEN improves the resulting workpiece geometry and reduces residual material and overcut compared with adapted CNC generation baselines.

0.46