CS Paper Radar

Blind tests of a simple-body model of submarine target strength on open benchmarks

Sunil Tyagi

eess.AS cs.SDeess.SP ·submitted 2026-11-19 12:01 UTC · v1
unusual

Abstract

Finite-element and boundary-element models of a submarine's sonar echo need a mesh and a solver, and their cost grows quickly with frequency. SSR-Sim takes an analytical route. The hull is cut into a few simple bodies, the echo of each is a closed-form result of geometrical acoustics or of the Kirchhoff approximation, the surface enters through a plane-wave reflection coefficient, and the echoes add in energy. This paper describes the method, including the reduction of a hull and its sail to simple bodies, and tests it on three open cases. (1) The reflection coefficient of a 50 mm rubber tile on steel plating, computed with finite elements by Yang et al., is reproduced to 0.02 rms or better at incidence angles from 0° to 75° once the layer is allowed to refract. (2) For the rigid full-scale BeTSSi submarine at 1 kHz, a prediction fixed before the reference was opened agrees with the boundary-element results of Venås and Kvamsdal to within 0.7 dB in every aspect sector from the bow to 150°; in the stern sector it is 5 dB high. (3) For a 1:15 BeTSSi model with 10 mm tiles measured in a lake, a second blind prediction is within -3.1, +1.4 and -0.5 dB of the measured level over aspects 0-120° at 5, 15 and 20 kHz, against -3.1, +3.1 and +3.5 dB for the Kirchhoff-finite-element computation published with the measurement. At 10 kHz, on a resonance of the tile, the prediction is 6.9 dB low, and in the bow sector it is 7 dB or more low at every frequency. The tests cover the specular component and the coating model only. The failures show what such a model lacks: edge diffraction and the returns that set the off-beam floor of a real model.

Comment
17 pages, 6 figures, 9 tables, Data: https://doi.org/10.57967/hf/11704

Closest papers

Nearest neighbours by meaning across the whole index.

Localized Generative Design of Ship Hulls with Diffusion Models and High-Fidelity Assessment

cs.AI math.APmath-ph ·2026-10-09 ·Hadi Keramati, Mohammed A. Hannan, Patrick Kirchen, Sina Tousi, Joonas Riekkinen +2 more
benchmark similarity 0.56
Abstract

Practical ship design requires localized refinement and performance evaluation. This paper presents a reward-directed diffusion framework for localized hull optimization. Parametric masking during dataset generation restricts geometric changes to selected variables, including the bulbous bow and forebody, while preserving full-hull continuity. Surrogate-assisted sequential Monte Carlo sampling targets reduced predicted calm-water resistance, with stability retained through training data and displacement matched during screening. An automated viscous free-surface CFD pipeline, validated against measurements for two benchmark container ships, evaluates a generated variant and GenHull E, a hull refined by a naval architect within the same representation. At matched KRISO Container Ship (KCS) displacement, the generated variant has comparable total resistance at $F_n=0.195$ but 45-50% higher resistance at $F_n=0.250$ and $0.260$, missed by empirical screening. GenHull E achieves 6-8% lower total resistance up to $F_n=0.240$ but higher resistance above $F_n=0.250$ as opposing friction and pressure trends reverse the gains. Aggregating resistance across this crossover can conceal tradeoffs that emerge when friction and pressure components are evaluated separately. The assessment reveals an inability to represent a faired bulbous bow and a reward lacking viscous pressure and stability terms. These findings show how high-fidelity assessment informs improved representations and objectives for physically realizable generative designs.

0.24

Evaluation of effective wave velocities in polycrystalline materials using the ultrasonic reflection matrix

eess.IV physics.app-ph ·2026-09-22 ·Gatien Clément, Alexandre Aubry, Cécile Brütt, Benoît Gérardin, Claire Prada
unusual similarity 0.50
Abstract · 13 pages, 14 figures

In-depth characterization of heterogeneous materials has long been a challenge in non-destructive testing. Here, a method is proposed to determine the elastic constants of metallic polycrystalline materials using back-scattered ultrasound. The waves scattered by the microstructure are analyzed to image the effective bulk velocities. To this end, a reflection matrix is acquired with an array of transducers. The projection of this matrix onto a focused basis is used to estimate an average point spread function. Optimizing this function with respect to the propagation model leads to an estimation of the longitudinal velocity. Additional treatments are developed to adapt the method to map the shear wave velocity. The local Poisson's ratio is then deduced from the ratio between those two velocities. Young's modulus and shear modulus can also be obtained assuming known densities. This matrix approach is experimentally validated on different polycrystalline materials. A sample displaying heterogeneous mechanical properties is then simulated to assess the accuracy and the resolution of the method. Its strengths and limitations are discussed, demonstrating its potential for quantitative non-destructive material characterization.

0.30

Leveraging Bayesian Optimization for Array Shape Self-Calibration in Underwater DoA Estimation

eess.SP physics.optics ·2026-08-31 ·Xin Gui, Tianang Li, Changjia Wang, Bowen Han, Yunchuan Zhang +1 more
benchmark similarity 0.46
Abstract · 13 pages, 12 figures, submitted to an IEEE journal

Flexible sensing arrays are commonly used in underwater acoustic networks, but suppressed by unpredictable geometric deformations. Existing array shape self-calibration methods often estimate individual element positions separately, leading to a high dimensional optimization problem over long arrays. To address this problem, this paper proposes a Bayesian Optimization-assisted Geometry Estimation (BOGE) strategy operating with a hierarchical optimization process and a physics-informed parametric model for array geometry correction. BOGE formulates array shape self-calibration as an optimization problem, where candidate geometries are evaluated by the noise subspace residual. We perform Bayesian optimization to configure the physics-informed parametric model and then refine the selected geometry through numerical optimization. Empirical results show that BOGE achieves lower mean geometric root mean square error (RMSE) than the benchmark methods across a wide range of noise levels. On the public SWellEx-96 dataset, BOGE achieves a geometric RMSE of $0.659$ meters at $166$ Hz. A lake trial further shows that BOGE provides fixed source localization and moving target tracking performance comparable to the comparison methods.

0.24

Sea-State-Induced Performance Transition in Maritime Networks: A Roughness-Aware Stochastic Geometry Framework

cs.NI ·2026-08-21 ·Wen-Yu Dong, Shaoshi Yang, Song Zhao, Rui-Si Han, Qi Bi +1 more
similarity 0.44
Abstract · 6 pages, 4 figures

Analytical studies of maritime wireless networks commonly assume a deterministic smooth sea surface, leaving unclear how realistic ocean conditions reshape network-level reliability. Unlike conventional intuition that sea roughness always deteriorates propagation, this work reveals a non-monotonic sea-state-induced performance transition caused by the competition between interference-null mitigation and coherent reflection loss. This paper develops a physically grounded, sea-state-aware stochastic geometry framework for maritime networks by incorporating sea surface roughness into propagation modeling. Specifically, we derive an effective reflection coefficient based on the classical Rayleigh roughness criterion, where the significant wave height explicitly characterizes the attenuation of the coherent specular reflection component caused by surface roughness. By integrating the proposed channel model into a stochastic geometry framework, we derive tractable expressions for uplink coverage probability under different sea states. Our analysis reveals a non-monotonic impact of sea roughness on network performance under the considered propagation model: moderate roughness can improve reliability-oriented coverage by mitigating destructive interference nulls, whereas stronger roughness attenuates coherent reflected energy and degrades high-SINR performance. Measurement comparisons support the underlying roughness-sensitive reflection mechanism, while rough-sea VHF results are interpreted as wavelength-specific model predictions rather than direct empirical validation.

0.18

Spatial Thickness Mapping in Heterogeneous Plate Using Wave Physics-Informed Regression

eess.SP ·2026-10-01 ·Amanda Beck, Harsha Vardhan Tetali, Michael MacIsaac, Charlie Tran, Woohyun Eum +2 more
similarity 0.43
Abstract

Traditional guided wave methods for structural health monitoring typically assume uniform material properties, which limit their ability to characterize heterogeneous structures with spatially varying thickness, damage, or material properties. These are challenges commonly encountered in corrosion assessment, composite delamination detection, and structural degradation monitoring. This paper presents a wave physics-informed regression approach that enables spatially resolved characterization of material properties by extracting local dispersion curves across a structure. Our approach focuses on a highly interpretable but flexible physics-informed framework that can be solved using fast algorithms and achieve robust numerical solutions. This paper discusses the mathematical design of the framework, the algorithm, and its interpretation. The framework was applied to a guided wave wavefield imaging dataset from a thin aluminum plate with non-uniform thickness around a hole to validate its practicality. The framework creates an accurate thickness map (correlation coefficient 0.94 with x-ray CT validation) as well as extracts the frequency-dependent velocities of waves within those regions.

0.25

Data-driven and physics-guided hindcasting of measured wave spectra

cs.LG physics.ao-ph ·2026-10-21 ·Sander Rikka
unusual similarity 0.42
Abstract

Short-range hindcasts of measured wave spectra are evaluated using a recurrent model initialized by one hourly buoy spectrum and supplied with local wind, fetch and depth. Measurements from three Baltic Sea stations are combined for training in 2017--2020, validation in 2021 and testing in 2022. ERA5 reanalysis supplies winds throughout the twelve-hour prediction interval. The comparison examines supervision of spectral variance, peak frequency and peak amplitude, followed by empirical wind-sea bounds and a local relaxation constraint. Variance and peak-frequency supervision gives the lowest spectral error within the data-driven comparison, whereas additional peak-amplitude supervision gives the lowest wave-height error. In the matched physical comparison, relaxation reduces height RMSE by 5.01\% to \PhPtwoHs{}~cm. Extending this constraint through hours 13--24, without spectral targets at those hours, reduces primary spectral RMSE by 2.31\% to \PhPthreeSpec{}~$\unitE$. Upper-bound constraints increase errors. Wind-condition comparisons show spectral gains from extended relaxation in increasing, decreasing and steady strong winds, with little change in steady weak winds. The results support modest, objective-dependent benefits from local physical guidance. Wave-height scores concern the retained frequency band, and operational forecasting and transfer to independent stations remain to be evaluated.

0.25

MiDShip: Multimodal Dataset of Ship Cargo Hold Structures for Engineering Design

cs.CE cs.LG ·2026-09-04 ·Noah J. Bagazinski, Md. Ferdous Alam, Jaya Manideep Rebbagondla, Faez Ahmed
similarity 0.42
Abstract

Ship structures govern vessel strength, safety, and manufacturability, but their design must satisfy hundreds of classification society requirements, making the process complex and iterative. Data-driven approaches are limited by the lack of structured datasets linking design geometry, structural performance, and rule-based constraints. This paper presents MiDShip, a multimodal dataset of 12,753 synthetic cargo-hold structural designs: 6,020 random, 496 generated by an SGLD-inspired procedure, and 6,237 generated by an equation-informed repair procedure. Each design includes parametric data, full and mesh-ready 3D geometry, engineering drawings and annotations, a bill of materials, and preliminary structural evaluations. Twenty-five constraints derived from a subset of ABS MVR are also evaluated. None of the random designs satisfies all constraints. Among the SGLD-inspired designs, 322 (64.9%) were fully compliant, with an average of 0.409 violations, 82.7% below the seed mean and 96.9% below the random-design mean. The repair procedure, developed through LLM-assisted code analysis, produced 4,952 fully compliant designs (79.4%), averaging 0.296 violations, 97.1% below the paired-source mean. In equal-size comparisons, mean nearest-neighbor distances in the scaled 120-parameter space were 3.495 for repaired designs, 1.144 for SGLD batches, and 3.729 for random designs. The primary contribution is the synchronized dataset and its generation and evaluation infrastructure; the generation studies demonstrate its utility rather than proposing new optimization algorithms. MiDShip supports machine learning, generative design, and automated rule-based evaluation for ship structures.

0.24

Proper Sea Surface Roughness Enhances the Performance of Near-Shore Maritime Networks

cs.NI ·2026-08-20 ·Wen-Yu Dong, Shaoshi Yang, Song Zhao, Jinyang Yu, Weiliang Xie +3 more
top venue similarity 0.42
Abstract · 17 pages, 13figures, accepted by IEEE Transactions on Communications

Accurate performance analysis for near-shore maritime wireless communication is essential for ensuring robust and reliable operations. However, existing analytical models often rely on oversimplified propagation assumptions, such as a perfectly smooth sea surface, which fail to capture the full dynamics of the maritime channel. In this paper, we develop a physically grounded analytical framework using stochastic geometry that bridges this gap. The spatial distribution of vessels is modeled as a non-homogeneous Poisson point process to reflect realistic near-port densities. We replace the idealized smooth-sea assumption by deriving a novel reflection coefficient from the classical Rayleigh criterion, which explicitly links the path loss to the significant wave height. Integrating this roughness-aware channel model into the stochastic geometry framework, we derive new analytical expressions for the uplink coverage probability and average ergodic rate, providing the first tractable characterization of aggregate interference under such dynamic conditions. The analysis reveals a sea-state-dependent reliability--capacity trade-off: roughness-induced attenuation of the coherent specular reflection can suppress destructive-interference nulls and improve reliability-oriented coverage, while reducing high-SINR and average-rate performance. Available measurements support the underlying roughness-sensitive reflection mechanism, but direct VHF validation under rough sea conditions remains unavailable; the corresponding rough-sea results are therefore interpreted as model-based predictions. A cross-frequency ablation further confirms the wavelength dependence of the roughness effect and shows that the reflection coefficient must be evaluated for the operating frequency.

0.68